Add sonar and push to pypi

Issue-Id: DCAEGEN2-60
Change-Id: I4d2d32ca2c5ffb113c4379a1b3374b1a1dfc1856
Signed-off-by: Lusheng Ji <lji@research.att.com>

13 files changed, 585 insertions, 64 deletions

diff --git a/check-blueprint-vs-input/pom.xml b/check-blueprint-vs-input/pom.xml
index 9af1db6..d3a9e5a 100644
--- a/check-blueprint-vs-input/pom.xml
+++ b/check-blueprint-vs-input/pom.xml
@@ -21,13 +21,13 @@ ECOMP is a trademark and service mark of AT&T Intellectual Property.
 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
   <modelVersion>4.0.0</modelVersion>
   <parent>
-    <groupId>org.onap.dcaegen2</groupId>
+    <groupId>org.onap.dcaegen2.utils</groupId>
     <artifactId>utils</artifactId>
     <version>1.0.0-SNAPSHOT</version>
   </parent>
   <groupId>org.onap.dcaegen2.utils</groupId>
   <artifactId>check-blueprint-vs-input</artifactId>
-  <name>check-blueprint-vs-input</name>
+  <name>dcaegen2-utils-check-blueprint-vs-input</name>
   <version>1.0.0-SNAPSHOT</version>
   <url>http://maven.apache.org</url>
 
diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh
new file mode 100755
index 0000000..92e5786
--- /dev/null
+++ b/mvn-phase-lib.sh
@@ -0,0 +1,386 @@
+#!/bin/bash
+
+# ================================================================================
+# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+
+#MVN_PROJECT_MODULEID="$1"
+#MVN_PHASE="$2"
+#PROJECT_ROOT=$(dirname $0)
+
+FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
+if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
+  MVN_PROJECT_MODULEID=""
+fi
+
+if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
+  echo "=> for SNAPSHOT artifact build"
+  MVN_DEPLOYMENT_TYPE='SNAPSHOT'
+else
+  echo "=> for STAGING/RELEASE artifact build"
+  MVN_DEPLOYMENT_TYPE='STAGING'
+fi
+echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
+
+
+TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
+
+# expected environment variables
+if [ -z "${MVN_NEXUSPROXY}" ]; then
+    echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
+    exit
+fi
+MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
+echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
+
+if [ -z "$WORKSPACE" ]; then
+    WORKSPACE=$(pwd)
+fi
+
+if [ -z "$SETTINGS_FILE" ]; then
+    echo "SETTINGS_FILE environment variable not set.  Cannot proceed"
+    exit
+fi
+
+
+
+# mvn phase in life cycle
+MVN_PHASE="$2"
+
+echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
+echo "MVN_PHASE is                       [$MVN_PHASE]"
+echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
+echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
+echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
+echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
+echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
+echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
+MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
+echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
+echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
+echo "MVN_DOCKERREGISTRY_DAILY is        [$MVN_DOCKERREGISTRY_DAILY]"
+echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
+
+echo "MVN_PYPISERVER_SERVERID            [$MVN_PYPISERVER_SERVERID]"
+echo "MVN_PYPISERVER_BASEURL is          [$MVN_PYPISERVER_BASEURL]"
+
+
+
+clean_templated_files() 
+{
+  TEMPLATE_FILES=$(find . -name "*-template")
+  for F in $TEMPLATE_FILES; do
+    F2=$(echo "$F" | sed 's/-template$//')
+    rm -f "$F2"
+  done
+}
+clean_tox_files() 
+{
+  TOX_FILES=$(find . -name ".tox")
+  TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
+  for F in $TOX_FILES; do
+    rm -rf "$F"
+  done
+}
+
+expand_templates() 
+{
+  # set up env variables, get ready for template resolution
+  # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+ 
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
+
+  export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_NEXUSPROXY}/content/sites/pypi"
+
+  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY"
+  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots"
+
+
+  TEMPLATE_FILES=$(find . -name "*-template")
+  for F in $TEMPLATE_FILES; do
+    F2=$(echo "$F" | sed 's/-template$//')
+    cp "$F" "$F2"
+    MOD=$(stat --format '%a' "$F")
+    chmod "$MOD" "$F2"
+  done
+   
+
+  TEMPLATES=$(env |grep ONAPTEMPLATE)
+  if [ -z "$TEMPLATES" ]; then
+    return 0
+  fi
+
+  echo "====> Resolving the following temaplate from environment variables "
+  echo "[$TEMPLATES]"
+  SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
+  for TEMPLATE in $TEMPLATES; do
+    KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
+    VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
+    VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
+    set +e
+    FILES=$(grep -rl "$KEY")
+    set -e
+
+    if [ -z "$FILES" ]; then
+      continue
+    fi
+
+    # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
+    for F in $FILES; do
+      if [[ $F == *"$SELFFILE" ]]; then
+        continue
+      fi
+      if [[ "$F" == *-template ]]; then
+        continue
+      fi
+
+      echo "======> Resolving template $KEY to value $VALUE for file $F"
+      sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
+      #cat "$F"
+    done
+
+    #if [ ! -z "$FILES" ]; then
+    #   echo "====> Resolving template $VALUE to value $VALUE"
+    #   #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
+    #   grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
+    #   #echo $CMD
+    #   #eval $CMD
+    #fi
+  done
+  echo "====> Done template reolving"
+}
+
+
+run_tox_test() 
+{ 
+  set -x
+  CURDIR=$(pwd)
+  TOXINIS=$(find . -name "tox.ini")
+  for TOXINI in "${TOXINIS[@]}"; do
+    DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
+    cd "${CURDIR}/${DIR}"
+    rm -rf ./venv-tox ./.tox
+    virtualenv ./venv-tox
+    source ./venv-tox/bin/activate
+    pip install --upgrade pip
+    pip install --upgrade tox argparse
+    pip freeze
+    tox
+    deactivate
+    rm -rf ./venv-tox ./.tox
+  done
+}
+
+build_wagons() 
+{
+  rm -rf ./*.wgn venv-pkg
+
+  SETUPFILES=$(find . -name "setup.py")
+  for SETUPFILE in $SETUPFILES; do
+    PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev)
+    PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+    PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+
+    echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION"
+
+    virtualenv ./venv-pkg
+    source ./venv-pkg/bin/activate
+    pip install --upgrade pip
+    pip install wagon
+    wagon create --format tar.gz "$PLUGIN_DIR"
+    deactivate
+    rm -rf venv-pkg
+
+    PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
+    echo Built package: "${PKG_FILE_NAMES[@]}"
+  done
+}
+
+
+upload_raw_file() 
+{
+  # Extract the username and password to the nexus repo from the settings file
+  USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
+  PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
+  NETRC=$(mktemp)
+  echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
+
+  REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
+
+  OUTPUT_FILE=$1
+  EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
+  if [ "$EXT" == 'yaml' ]; then
+    OUTPUT_FILE_TYPE='text/x-yaml'
+  elif [ "$EXT" == 'sh' ]; then
+    OUTPUT_FILE_TYPE='text/x-shellscript'
+  elif [ "$EXT" == 'gz' ]; then
+    OUTPUT_FILE_TYPE='application/gzip'
+  elif [ "$EXT" == 'wgn' ]; then
+    OUTPUT_FILE_TYPE='application/gzip'
+  else
+    OUTPUT_FILE_TYPE='application/octet-stream'
+  fi
+
+
+  if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
+    SEND_TO="${REPO}/${FQDN}/snapshots"
+  elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
+    SEND_TO="${REPO}/${FQDN}/releases"
+  else
+    echo "Unreconfnized deployment type, quit"
+    exit
+  fi
+  if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
+    SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
+  fi
+
+  echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
+  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}"
+  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}"
+  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
+}
+
+
+
+upload_wagons_and_type_yamls()
+{
+  WAGONS=$(ls -1 ./*.wgn)
+  for WAGON in $WAGONS ; do
+    WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-')
+    WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-')
+    WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1)
+   
+    upload_raw_file "$WAGON"
+    upload_raw_file "$WAGON_TYPEFILE"
+  done
+}
+
+upload_files_of_extension()
+{
+  FILES=$(ls -1 ./*."$1")
+  for F in $FILES ; do
+    upload_raw_file "$F"
+  done
+}
+
+
+generate_pypirc_then_publish() 
+{
+  set +x
+  USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
+  PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
+
+  if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
+    MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
+  fi
+ 
+
+  cat > ~/.pypirc <<EOL
+[distutils]
+index-servers = 
+  $MVN_PYPISERVER_SERVERID
+ 
+[$MVN_PYPISERVER_SERVERID]
+repository: $MVN_PYPISERVER_BASEURL
+username: $USER
+password: $PASS
+EOL
+
+  # this may fail if a package of same version exists
+  python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
+  set -x
+}
+
+
+
+build_and_push_docker()
+{
+  IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
+  IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
+  IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
+
+  # use the major and minor version of the MVN artifact version as docker image version
+  VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
+  VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
+
+  LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
+  # build a docker image
+  docker build --rm -f ./Dockerfile -t "${LFQI}" ./
+
+  REPO=""
+  if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+     REPO=$MVN_DOCKERREGISTRY_DAILY
+  elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+     # there seems to be no staging docker registry?  set to use SNAPSHOT also
+     #REPO=$MVN_DOCKERREGISTRY_RELEASE
+     REPO=$MVN_DOCKERREGISTRY_DAILY
+  else
+     echo "Fail to determine DEPLOYMENT_TYPE"
+     REPO=$MVN_DOCKERREGISTRY_DAILY
+  fi
+  echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
+
+  if [ ! -z "$REPO" ]; then
+    USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
+    PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
+    if [ -z "$USER" ]; then
+      echo "Error: no user provided"
+    fi
+    if [ -z "$PASS" ]; then
+      echo "Error: no password provided"
+    fi
+    [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
+    echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
+    docker login "$REPO" -u "$USER" -p "$PASS"
+
+    if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+      REPO="$REPO/snapshots"
+    elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+      # there seems to be no staging docker registry?  set to use SNAPSHOT also
+      #REPO=$MVN_DOCKERREGISTRY_RELEASE
+      REPO="$REPO"
+    else
+      echo "Fail to determine DEPLOYMENT_TYPE"
+      REPO="$REPO/unknown"
+    fi
+
+    OLDTAG="${LFQI}"
+    PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
+    for NEWTAG in ${PUSHTAGS}
+    do
+      echo "tagging ${OLDTAG} to ${NEWTAG}"
+      docker tag "${OLDTAG}" "${NEWTAG}"
+      echo "pushing ${NEWTAG}"
+      docker push "${NEWTAG}"
+      OLDTAG="${NEWTAG}"
+    done
+  fi
+
+}
+
+
+
diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh
index 78da207..094e642 100755
--- a/mvn-phase-script.sh
+++ b/mvn-phase-script.sh
@@ -19,10 +19,28 @@
 # ECOMP is a trademark and service mark of AT&T Intellectual Property.
 
 
+set -ex
+
+
 echo "running script: [$0] for module [$1] at stage [$2]"
 
-echo "=> Prepare environment "
-env
+MVN_PROJECT_MODULEID="$1"
+MVN_PHASE="$2"
+PROJECT_ROOT=$(dirname $0)
+
+# expected environment variables
+if [ -z "${MVN_NEXUSPROXY}" ]; then
+    echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
+    exit 1
+fi
+if [ -z "$SETTINGS_FILE" ]; then
+    echo "SETTINGS_FILE environment variable not set.  Cannot proceed"
+    exit 2
+fi
+
+
+source "${PROJECT_ROOT}"/mvn-phase-lib.sh
+
 
 # This is the base for where "deploy" will upload
 # MVN_NEXUSPROXY is set in the pom.xml
@@ -31,73 +49,96 @@ REPO=$MVN_NEXUSPROXY/content/sites/raw/$MVN_PROJECT_GROUPID
 TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
 export BUILD_NUMBER="${TIMESTAMP}"
 
-# expected environment variables
-if [ -z "${MVN_NEXUSPROXY}" ]; then
-    echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
-    exit
-fi
-MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
-echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
 
-# use the version text detect which phase we are in in LF CICD process: verify, merge, or (daily) release
-
-# mvn phase in life cycle
-MVN_PHASE="$2"
 shift 2
 
 case $MVN_PHASE in
 clean)
   echo "==> clean phase script"
-  if [ -f makefile -o -f Makefile ];then make clean; else :; fi
+  case $MVN_PROJECT_MODULEID in
+  check-blueprint-vs-input | repackage) 
+    if [ -f makefile -o -f Makefile ];then make clean; else :; fi
+    ;;
+  *)
+    clean_templated_files
+    clean_tox_files
+    rm -rf ./venv-* ./*.wgn ./site ./coverage.xml ./xunit-results.xml
+    ;;
+  esac
   ;;
 generate-sources)
   echo "==> generate-sources phase script"
-  if [ -f makefile -o -f Makefile ];then make generate-sources; else :; fi
+  case $MVN_PROJECT_MODULEID in
+  check-blueprint-vs-input | repackage) 
+    if [ -f makefile -o -f Makefile ];then make generate-sources; else :; fi
+    ;;
+  *)
+    expand_templates
+    ;;
+  esac
   ;;
 compile)
   echo "==> compile phase script"
-  if [ -f makefile -o -f Makefile ];then make compile; else :; fi
+  case $MVN_PROJECT_MODULEID in
+  check-blueprint-vs-input | repackage) 
+    if [ -f makefile -o -f Makefile ];then make compile; else :; fi
+    ;;
+  *)
+    ;;
+  esac
   ;;
 test)
   echo "==> test phase script"
-  if [ -f makefile -o -f Makefile ];then make test; else :; fi
+  case $MVN_PROJECT_MODULEID in
+  check-blueprint-vs-input | repackage) 
+    if [ -f makefile -o -f Makefile ];then make test; else :; fi
+    ;;
+  *)
+    set +e
+    run_tox_test
+    set -e
+    ;;
+  esac
   ;;
 package)
   echo "==> package phase script"
-  if [ -f makefile -o -f Makefile ];then make package; else :; fi
+  case $MVN_PROJECT_MODULEID in
+  check-blueprint-vs-input | repackage) 
+    if [ -f makefile -o -f Makefile ];then make package; else :; fi
+    ;;
+  *)
+    ;;
+  esac
   ;;
 install)
   echo "==> install phase script"
-  if [ -f makefile -o -f Makefile ];then make install; else :; fi
+  case $MVN_PROJECT_MODULEID in
+  check-blueprint-vs-input | repackage) 
+    if [ -f makefile -o -f Makefile ];then make install; else :; fi
+    ;;
+  *)
+    ;;
+  esac
   ;;
 deploy)
   echo "==> deploy phase script"
-  if [ -f makefile -o -f Makefile ];then make deploy
-  else 
-    # Upload all files (listed as additional deployment arguments) to Nexus
-    set -e -x
-    function setnetrc {
-      # Turn off -x so won't leak the credentials
-      set +x
-      hostport=$(echo $1 | cut -f3 -d /)
-      host=$(echo $hostport | cut -f1 -d:)
-      settings=${SETTINGS_FILE:-$HOME/.m2/settings.xml}
-      echo machine $host login $(xpath -q -e "//servers/server[id='$MVN_SERVER_ID']/username/text()" $settings) password $(xpath -q -e "//servers/server[id='$MVN_SERVER_ID']/password/text()" $settings) >$HOME/.netrc
-      chmod 600 $HOME/.netrc
-      set -x
-    }
-    function putraw {
-      curl -X PUT -H "Content-Type: $3" --netrc --upload-file $1 --url $REPO/$2
-    }
-    setnetrc $REPO
-  
-    # additional
-    for artifact
-    do
-      putraw $artifact artifacts/$artifact application/data
-    done
-    set +e +x
-  fi
+  case $MVN_PROJECT_MODULEID in
+  check-blueprint-vs-input | repackage) 
+    if [ -f makefile -o -f Makefile ];then make deploy
+    else 
+      # Upload all files (listed as additional deployment arguments) to Nexus
+      # additional
+      for artifact
+      do
+        upload_raw_file $artifact
+      done
+      set +e +x
+    fi
+    ;;
+  *)
+    generate_pypirc_then_publish
+    ;;
+  esac
   ;;
 *)
   echo "==> unprocessed phase"
diff --git a/pom.xml b/pom.xml
index 2c6e57a..1edd6d4 100644
--- a/pom.xml
+++ b/pom.xml
@@ -22,11 +22,11 @@ ECOMP is a trademark and service mark of AT&T Intellectual Property.
 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
   <modelVersion>4.0.0</modelVersion>
   <parent>
-    <groupId>org.onap.oparent</groupId>
-    <artifactId>oparent</artifactId>
+    <groupId>org.onap.dcaegen2</groupId>
+    <artifactId>root</artifactId>
     <version>1.0.0-SNAPSHOT</version>
   </parent>
-  <groupId>org.onap.dcaegen2</groupId>
+  <groupId>org.onap.dcaegen2.utils</groupId>
   <artifactId>utils</artifactId>
   <name>dcaegen2-utils</name>
   <version>1.0.0-SNAPSHOT</version>
@@ -41,4 +41,57 @@ ECOMP is a trademark and service mark of AT&T Intellectual Property.
      <module>repackage</module>
   </modules>
 
+  <properties>
+    <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
+    <sonar.skip>true</sonar.skip>
+    <sonar.sources>*/</sonar.sources>
+    <sonar.junit.reportsPath>**/xunit-results.xml</sonar.junit.reportsPath>
+    <sonar.python.coverage.reportPath>**/coverage.xml</sonar.python.coverage.reportPath>
+    <!-- customize the SONARQUBE URL -->
+    <sonar.host.url>http://localhost:9000</sonar.host.url>
+    <sonar.exclusions>tests/*</sonar.exclusions>
+    <!-- below are language dependent -->
+    <!-- for Python -->
+    <sonar.language>py</sonar.language>
+    <sonar.pluginName>Python</sonar.pluginName>
+    <sonar.inclusions>**/*.py</sonar.inclusions>
+    <!-- for JavaScaript -->
+    <!--
+    <sonar.language>js</sonar.language>
+    <sonar.pluginName>JS</sonar.pluginName>
+    <sonar.inclusions>**/*.js</sonar.inclusions>
+    -->
+  </properties>
+  <build>
+    <finalName>${project.artifactId}-${project.version}</finalName>
+    <pluginManagement>
+      <plugins>
+        <plugin>
+          <groupId>org.codehaus.mojo</groupId>
+          <artifactId>exec-maven-plugin</artifactId>
+          <version>1.2.1</version>
+          <configuration>
+            <executable>${session.executionRootDirectory}/mvn-phase-script.sh</executable>
+            <environmentVariables>
+              <!-- make mvn properties as env for our script -->
+              <!-- make mvn properties as env for our script -->
+              <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID>
+              <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID>
+              <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION>
+              <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY>
+              <MVN_RAWREPO_BASEURL_UPLOAD>${onap.nexus.rawrepo.baseurl.upload}</MVN_RAWREPO_BASEURL_UPLOAD>
+              <MVN_RAWREPO_BASEURL_DOWNLOAD>${onap.nexus.rawrepo.baseurl.download}</MVN_RAWREPO_BASEURL_DOWNLOAD>
+              <MVN_RAWREPO_SERVERID>${onap.nexus.rawrepo.serverid}</MVN_RAWREPO_SERVERID>
+              <MVN_DOCKERREGISTRY_SNAPSHOT>${onap.nexus.dockerregistry.snapshot}</MVN_DOCKERREGISTRY_SNAPSHOT>
+              <MVN_DOCKERREGISTRY_RELEASE>${onap.nexus.dockerregistry.release}</MVN_DOCKERREGISTRY_RELEASE>
+              <MVN_DOCKERREGISTRY_SNAPSHOT_SERVERID>${onap.nexus.dockerregistry.snapshot.serverid}</MVN_DOCKERREGISTRY_SNAPSHOT_SERVERID>
+              <MVN_DOCKERREGISTRY_RELEASE_SERVERID>${onap.nexus.dockerregistry.release.serverid}</MVN_DOCKERREGISTRY_RELEASE_SERVERID>
+              <MVN_PYPISERVER_BASEURL>${onap.nexus.pypiserver.baseurl}</MVN_PYPISERVER_BASEURL>
+              <MVN_PYPISERVER_SERVERID>${onap.nexus.pypiserver.serverid}</MVN_PYPISERVER_SERVERID>
+            </environmentVariables>
+          </configuration>
+        </plugin>
+      </plugins>
+    </pluginManagement>
+  </build>
 </project>
diff --git a/python-cbs-docker-client/pom.xml b/python-cbs-docker-client/pom.xml
index f2e2ea1..ad704b4 100644
--- a/python-cbs-docker-client/pom.xml
+++ b/python-cbs-docker-client/pom.xml
@@ -21,19 +21,19 @@ ECOMP is a trademark and service mark of AT&T Intellectual Property.
 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
   <modelVersion>4.0.0</modelVersion>
   <parent>
-    <groupId>org.onap.dcaegen2</groupId>
+    <groupId>org.onap.dcaegen2.utils</groupId>
     <artifactId>utils</artifactId>
     <version>1.0.0-SNAPSHOT</version>
   </parent>
   <groupId>org.onap.dcaegen2.utils</groupId>
   <artifactId>python-cbs-docker-client</artifactId>
-  <name>python-cbs-docker-client</name>
+  <name>dcaegen2-utils-python-cbs-docker-client</name>
   <version>1.0.0-SNAPSHOT</version>
   <url>http://maven.apache.org</url>
 
   <properties>
     <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
-    <sonar.skip>true</sonar.skip>
+    <!--sonar.skip>false</sonar.skip-->
     <sonar.sources>.</sonar.sources>
     <!-- customize the SONARQUBE URL -->
     <!-- sonar.host.url>http://localhost:9000</sonar.host.url -->
diff --git a/python-cbs-docker-client/tox.ini b/python-cbs-docker-client/tox.ini
new file mode 100644
index 0000000..987b009
--- /dev/null
+++ b/python-cbs-docker-client/tox.ini
@@ -0,0 +1,11 @@
+# content of: tox.ini , put in same dir as setup.py
+[tox]
+envlist = py27,py35
+
+[testenv]
+deps=
+    -rrequirements.txt
+    pytest
+    coverage
+    pytest-cov
+commands=pytest --junitxml xunit-results.xml --cov {envsitepackagesdir} --cov-report=xml
diff --git a/python-dcae-policy/pom.xml b/python-dcae-policy/pom.xml
index e5b30c8..1d02fcd 100644
--- a/python-dcae-policy/pom.xml
+++ b/python-dcae-policy/pom.xml
@@ -21,19 +21,18 @@ ECOMP is a trademark and service mark of AT&T Intellectual Property.
 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
   <modelVersion>4.0.0</modelVersion>
   <parent>
-    <groupId>org.onap.dcaegen2</groupId>
+    <groupId>org.onap.dcaegen2.utils</groupId>
     <artifactId>utils</artifactId>
     <version>1.0.0-SNAPSHOT</version>
   </parent>
   <groupId>org.onap.dcaegen2.utils</groupId>
   <artifactId>python-dcae-policy</artifactId>
-  <name>python-dcae-policy</name>
+  <name>dcaegen2-utils-python-dcae-policy</name>
   <version>1.0.0-SNAPSHOT</version>
   <url>http://maven.apache.org</url>
 
   <properties>
     <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
-    <sonar.skip>true</sonar.skip>
     <sonar.sources>.</sonar.sources>
     <!-- customize the SONARQUBE URL -->
     <!-- sonar.host.url>http://localhost:9000</sonar.host.url -->
diff --git a/python-dcae-policy/tox.ini b/python-dcae-policy/tox.ini
new file mode 100644
index 0000000..987b009
--- /dev/null
+++ b/python-dcae-policy/tox.ini
@@ -0,0 +1,11 @@
+# content of: tox.ini , put in same dir as setup.py
+[tox]
+envlist = py27,py35
+
+[testenv]
+deps=
+    -rrequirements.txt
+    pytest
+    coverage
+    pytest-cov
+commands=pytest --junitxml xunit-results.xml --cov {envsitepackagesdir} --cov-report=xml
diff --git a/python-discovery-client/pom.xml b/python-discovery-client/pom.xml
index 0b05110..3aeb4db 100644
--- a/python-discovery-client/pom.xml
+++ b/python-discovery-client/pom.xml
@@ -21,19 +21,18 @@ ECOMP is a trademark and service mark of AT&T Intellectual Property.
 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
   <modelVersion>4.0.0</modelVersion>
   <parent>
-    <groupId>org.onap.dcaegen2</groupId>
+    <groupId>org.onap.dcaegen2.utils</groupId>
     <artifactId>utils</artifactId>
     <version>1.0.0-SNAPSHOT</version>
   </parent>
   <groupId>org.onap.dcaegen2.utils</groupId>
   <artifactId>python-discovery-client</artifactId>
-  <name>python-discovery-client</name>
+  <name>dcaegen2-utils-python-discovery-client</name>
   <version>1.0.0-SNAPSHOT</version>
   <url>http://maven.apache.org</url>
 
   <properties>
     <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
-    <sonar.skip>true</sonar.skip>
     <sonar.sources>.</sonar.sources>
     <!-- customize the SONARQUBE URL -->
     <!-- sonar.host.url>http://localhost:9000</sonar.host.url -->
diff --git a/python-discovery-client/tox.ini b/python-discovery-client/tox.ini
new file mode 100644
index 0000000..987b009
--- /dev/null
+++ b/python-discovery-client/tox.ini
@@ -0,0 +1,11 @@
+# content of: tox.ini , put in same dir as setup.py
+[tox]
+envlist = py27,py35
+
+[testenv]
+deps=
+    -rrequirements.txt
+    pytest
+    coverage
+    pytest-cov
+commands=pytest --junitxml xunit-results.xml --cov {envsitepackagesdir} --cov-report=xml
diff --git a/python-dockering/pom.xml b/python-dockering/pom.xml
index 37175e5..b71e77c 100644
--- a/python-dockering/pom.xml
+++ b/python-dockering/pom.xml
@@ -21,20 +21,19 @@ ECOMP is a trademark and service mark of AT&T Intellectual Property.
 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
   <modelVersion>4.0.0</modelVersion>
   <parent>
-    <groupId>org.onap.dcaegen2</groupId>
+    <groupId>org.onap.dcaegen2.utils</groupId>
     <artifactId>utils</artifactId>
     <version>1.0.0-SNAPSHOT</version>
   </parent>
   <groupId>org.onap.dcaegen2.utils</groupId>
   <artifactId>python-dockering</artifactId>
-  <name>python-dockering</name>
+  <name>dcaegen2-utils-python-dockering</name>
   <version>1.0.0-SNAPSHOT</version>
   <url>http://maven.apache.org</url>
 
   <properties>
     <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
     <sonar.skip>true</sonar.skip>
-    <sonar.sources>.</sonar.sources>
     <!-- customize the SONARQUBE URL -->
     <!-- sonar.host.url>http://localhost:9000</sonar.host.url -->
     <!-- below are language dependent -->
diff --git a/python-dockering/tox.ini b/python-dockering/tox.ini
new file mode 100644
index 0000000..987b009
--- /dev/null
+++ b/python-dockering/tox.ini
@@ -0,0 +1,11 @@
+# content of: tox.ini , put in same dir as setup.py
+[tox]
+envlist = py27,py35
+
+[testenv]
+deps=
+    -rrequirements.txt
+    pytest
+    coverage
+    pytest-cov
+commands=pytest --junitxml xunit-results.xml --cov {envsitepackagesdir} --cov-report=xml
diff --git a/repackage/pom.xml b/repackage/pom.xml
index 055c087..20d24a3 100644
--- a/repackage/pom.xml
+++ b/repackage/pom.xml
@@ -21,13 +21,13 @@ ECOMP is a trademark and service mark of AT&T Intellectual Property.
 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
   <modelVersion>4.0.0</modelVersion>
   <parent>
-    <groupId>org.onap.dcaegen2</groupId>
+    <groupId>org.onap.dcaegen2.utils</groupId>
     <artifactId>utils</artifactId>
     <version>1.0.0-SNAPSHOT</version>
   </parent>
   <groupId>org.onap.dcaegen2.utils</groupId>
   <artifactId>repackage</artifactId>
-  <name>repackage</name>
+  <name>dcaegen2-utils-repackage</name>
   <version>1.0.0-SNAPSHOT</version>
   <url>http://maven.apache.org</url>