summaryrefslogtreecommitdiffstats
path: root/mvn-phase-lib.sh
diff options
context:
space:
mode:
Diffstat (limited to 'mvn-phase-lib.sh')
-rwxr-xr-xmvn-phase-lib.sh387
1 files changed, 0 insertions, 387 deletions
diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh
deleted file mode 100755
index 8354a61..0000000
--- a/mvn-phase-lib.sh
+++ /dev/null
@@ -1,387 +0,0 @@
-#!/bin/bash
-
-# ================================================================================
-# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-
-
-#MVN_PROJECT_MODULEID="$1"
-#MVN_PHASE="$2"
-#PROJECT_ROOT=$(dirname $0)
-
-FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
-if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
- MVN_PROJECT_MODULEID=""
-fi
-
-if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
- echo "=> for SNAPSHOT artifact build"
- MVN_DEPLOYMENT_TYPE='SNAPSHOT'
-else
- echo "=> for STAGING/RELEASE artifact build"
- MVN_DEPLOYMENT_TYPE='STAGING'
-fi
-echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]"
-
-
-TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
-
-# expected environment variables
-if [ -z "${MVN_NEXUSPROXY}" ]; then
- echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed"
- exit
-fi
-MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
-echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
-
-if [ -z "$WORKSPACE" ]; then
- WORKSPACE=$(pwd)
-fi
-
-if [ -z "$SETTINGS_FILE" ]; then
- echo "SETTINGS_FILE environment variable not set. Cannot proceed"
- exit
-fi
-
-
-
-# mvn phase in life cycle
-MVN_PHASE="$2"
-
-echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]"
-echo "MVN_PHASE is [$MVN_PHASE]"
-echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]"
-echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]"
-echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]"
-echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]"
-echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]"
-echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
-MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
-echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]"
-echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]"
-echo "MVN_DOCKERREGISTRY_DAILY is [$MVN_DOCKERREGISTRY_DAILY]"
-echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]"
-
-echo "MVN_PYPISERVER_SERVERID [$MVN_PYPISERVER_SERVERID]"
-echo "MVN_PYPISERVER_BASEURL is [$MVN_PYPISERVER_BASEURL]"
-
-
-
-clean_templated_files()
-{
- TEMPLATE_FILES=$(find . -name "*-template")
- for F in $TEMPLATE_FILES; do
- F2=$(echo "$F" | sed 's/-template$//')
- rm -f "$F2"
- done
-}
-clean_tox_files()
-{
- TOX_FILES=$(find . -name ".tox")
- TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
- for F in $TOX_FILES; do
- rm -rf "$F"
- done
-}
-
-expand_templates()
-{
- # set up env variables, get ready for template resolution
- # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
- export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
-
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
- export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
-
- export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="$MVN_PYPISERVER_BASEURL"
-
- export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY"
- export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots"
-
-
- TEMPLATE_FILES=$(find . -name "*-template")
- for F in $TEMPLATE_FILES; do
- F2=$(echo "$F" | sed 's/-template$//')
- cp "$F" "$F2"
- MOD=$(stat --format '%a' "$F")
- chmod "$MOD" "$F2"
- done
-
-
- TEMPLATES=$(env |grep ONAPTEMPLATE)
- if [ -z "$TEMPLATES" ]; then
- return 0
- fi
-
- echo "====> Resolving the following temaplate from environment variables "
- echo "[$TEMPLATES]"
- SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
- for TEMPLATE in $TEMPLATES; do
- KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
- VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
- VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
- set +e
- FILES=$(grep -rl "$KEY")
- set -e
-
- if [ -z "$FILES" ]; then
- continue
- fi
-
- # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
- for F in $FILES; do
- if [[ $F == *"$SELFFILE" ]]; then
- continue
- fi
- if [[ "$F" == *-template ]]; then
- continue
- fi
-
- echo "======> Resolving template $KEY to value $VALUE for file $F"
- sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
- #cat "$F"
- done
-
- #if [ ! -z "$FILES" ]; then
- # echo "====> Resolving template $VALUE to value $VALUE"
- # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
- # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
- # #echo $CMD
- # #eval $CMD
- #fi
- done
- echo "====> Done template reolving"
-}
-
-
-run_tox_test()
-{
- set -x
- CURDIR=$(pwd)
- TOXINIS=$(find . -name "tox.ini")
- for TOXINI in "${TOXINIS[@]}"; do
- DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
- cd "${CURDIR}/${DIR}"
- rm -rf ./venv-tox ./.tox
- virtualenv ./venv-tox
- source ./venv-tox/bin/activate
- pip install --upgrade pip
- pip install --upgrade tox argparse
- pip freeze
- tox
- deactivate
- rm -rf ./venv-tox ./.tox
- done
-}
-
-build_wagons()
-{
- rm -rf ./*.wgn venv-pkg
-
- SETUPFILES=$(find . -name "setup.py")
- for SETUPFILE in $SETUPFILES; do
- PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev)
- PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
- PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-
- echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION"
-
- virtualenv ./venv-pkg
- source ./venv-pkg/bin/activate
- pip install --upgrade pip
- pip install wagon
- wagon create --format tar.gz "$PLUGIN_DIR"
- deactivate
- rm -rf venv-pkg
-
- PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
- echo Built package: "${PKG_FILE_NAMES[@]}"
- done
-}
-
-
-upload_raw_file()
-{
- # Extract the username and password to the nexus repo from the settings file
- USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
- PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
- NETRC=$(mktemp)
- echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
-
- REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
-
- OUTPUT_FILE=$(echo "$1" | sed -e "s/^.\///")
- EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
- if [ "$EXT" == 'yaml' ]; then
- OUTPUT_FILE_TYPE='text/x-yaml'
- elif [ "$EXT" == 'json' ]; then
- OUTPUT_FILE_TYPE='application/json'
- elif [ "$EXT" == 'sh' ]; then
- OUTPUT_FILE_TYPE='text/x-shellscript'
- elif [ "$EXT" == 'gz' ]; then
- OUTPUT_FILE_TYPE='application/gzip'
- elif [ "$EXT" == 'wgn' ]; then
- OUTPUT_FILE_TYPE='application/gzip'
- else
- OUTPUT_FILE_TYPE='application/octet-stream'
- fi
-
-
- if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
- SEND_TO="${REPO}/${MVN_PROJECT_GROUPID}/snapshots"
- elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
- SEND_TO="${REPO}/{$MVN_PROJECT_GROUPID}/releases"
- else
- echo "Unreconfnized deployment type, quit"
- exit
- fi
- if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
- SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
- fi
-
- echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
- curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}"
- curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}"
- curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
-}
-
-
-
-upload_wagons_and_type_yamls()
-{
- WAGONS=$(ls -1 ./*.wgn)
- for WAGON in $WAGONS ; do
- WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-')
- WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-')
- WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1)
-
- upload_raw_file "$WAGON"
- upload_raw_file "$WAGON_TYPEFILE"
- done
-}
-
-upload_files_of_extension()
-{
- FILES=$(ls -1 ./*."$1")
- for F in $FILES ; do
- upload_raw_file "$F"
- done
-}
-
-
-generate_pypirc_then_publish()
-{
- set +x
- USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
- PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
-
- if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
- MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
- fi
-
-
- cat > ~/.pypirc <<EOL
-[distutils]
-index-servers =
- $MVN_PYPISERVER_SERVERID
-
-[$MVN_PYPISERVER_SERVERID]
-repository: $MVN_PYPISERVER_BASEURL
-username: $USER
-password: $PASS
-EOL
-
- # this may fail if a package of same version exists
- python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
- set -x
-}
-
-
-
-build_and_push_docker()
-{
- IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
- IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
- IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
-
- # use the major and minor version of the MVN artifact version as docker image version
- VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
- VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
-
- LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
- # build a docker image
- docker build --rm -f ./Dockerfile -t "${LFQI}" ./
-
- REPO=""
- if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
- REPO=$MVN_DOCKERREGISTRY_DAILY
- elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
- # there seems to be no staging docker registry? set to use SNAPSHOT also
- #REPO=$MVN_DOCKERREGISTRY_RELEASE
- REPO=$MVN_DOCKERREGISTRY_DAILY
- else
- echo "Fail to determine DEPLOYMENT_TYPE"
- REPO=$MVN_DOCKERREGISTRY_DAILY
- fi
- echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
-
- if [ ! -z "$REPO" ]; then
- USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
- PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
- if [ -z "$USER" ]; then
- echo "Error: no user provided"
- fi
- if [ -z "$PASS" ]; then
- echo "Error: no password provided"
- fi
- [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
- echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
- docker login "$REPO" -u "$USER" -p "$PASS"
-
- if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
- REPO="$REPO/snapshots"
- elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
- # there seems to be no staging docker registry? set to use SNAPSHOT also
- #REPO=$MVN_DOCKERREGISTRY_RELEASE
- REPO="$REPO"
- else
- echo "Fail to determine DEPLOYMENT_TYPE"
- REPO="$REPO/unknown"
- fi
-
- OLDTAG="${LFQI}"
- PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
- for NEWTAG in ${PUSHTAGS}
- do
- echo "tagging ${OLDTAG} to ${NEWTAG}"
- docker tag "${OLDTAG}" "${NEWTAG}"
- echo "pushing ${NEWTAG}"
- docker push "${NEWTAG}"
- OLDTAG="${NEWTAG}"
- done
- fi
-
-}
-
-
-