diff options
Diffstat (limited to 'mvn-phase-lib.sh')
| -rwxr-xr-x | mvn-phase-lib.sh | 387 |
1 files changed, 0 insertions, 387 deletions
diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh deleted file mode 100755 index 8354a61..0000000 --- a/mvn-phase-lib.sh +++ /dev/null @@ -1,387 +0,0 @@ -#!/bin/bash - -# ================================================================================ -# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved. -# ================================================================================ -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# ============LICENSE_END========================================================= -# - - -#MVN_PROJECT_MODULEID="$1" -#MVN_PHASE="$2" -#PROJECT_ROOT=$(dirname $0) - -FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}" -if [ "$MVN_PROJECT_MODULEID" == "__" ]; then - MVN_PROJECT_MODULEID="" -fi - -if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then - echo "=> for SNAPSHOT artifact build" - MVN_DEPLOYMENT_TYPE='SNAPSHOT' -else - echo "=> for STAGING/RELEASE artifact build" - MVN_DEPLOYMENT_TYPE='STAGING' -fi -echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]" - - -TIMESTAMP=$(date +%C%y%m%dT%H%M%S) - -# expected environment variables -if [ -z "${MVN_NEXUSPROXY}" ]; then - echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed" - exit -fi -MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':') -echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY" - -if [ -z "$WORKSPACE" ]; then - WORKSPACE=$(pwd) -fi - -if [ -z "$SETTINGS_FILE" ]; then - echo "SETTINGS_FILE environment variable not set. Cannot proceed" - exit -fi - - - -# mvn phase in life cycle -MVN_PHASE="$2" - -echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]" -echo "MVN_PHASE is [$MVN_PHASE]" -echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]" -echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]" -echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]" -echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]" -echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]" -echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]" -MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':') -echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]" -echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]" -echo "MVN_DOCKERREGISTRY_DAILY is [$MVN_DOCKERREGISTRY_DAILY]" -echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]" - -echo "MVN_PYPISERVER_SERVERID [$MVN_PYPISERVER_SERVERID]" -echo "MVN_PYPISERVER_BASEURL is [$MVN_PYPISERVER_BASEURL]" - - - -clean_templated_files() -{ - TEMPLATE_FILES=$(find . -name "*-template") - for F in $TEMPLATE_FILES; do - F2=$(echo "$F" | sed 's/-template$//') - rm -f "$F2" - done -} -clean_tox_files() -{ - TOX_FILES=$(find . -name ".tox") - TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')" - for F in $TOX_FILES; do - rm -rf "$F" - done -} - -expand_templates() -{ - # set up env variables, get ready for template resolution - # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs - export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins" - export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins" - export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints" - export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints" - - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots" - - export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="$MVN_PYPISERVER_BASEURL" - - export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY" - export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots" - - - TEMPLATE_FILES=$(find . -name "*-template") - for F in $TEMPLATE_FILES; do - F2=$(echo "$F" | sed 's/-template$//') - cp "$F" "$F2" - MOD=$(stat --format '%a' "$F") - chmod "$MOD" "$F2" - done - - - TEMPLATES=$(env |grep ONAPTEMPLATE) - if [ -z "$TEMPLATES" ]; then - return 0 - fi - - echo "====> Resolving the following temaplate from environment variables " - echo "[$TEMPLATES]" - SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev) - for TEMPLATE in $TEMPLATES; do - KEY=$(echo "$TEMPLATE" | cut -f1 -d'=') - VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=') - VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g') - set +e - FILES=$(grep -rl "$KEY") - set -e - - if [ -z "$FILES" ]; then - continue - fi - - # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM - for F in $FILES; do - if [[ $F == *"$SELFFILE" ]]; then - continue - fi - if [[ "$F" == *-template ]]; then - continue - fi - - echo "======> Resolving template $KEY to value $VALUE for file $F" - sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F" - #cat "$F" - done - - #if [ ! -z "$FILES" ]; then - # echo "====> Resolving template $VALUE to value $VALUE" - # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\"" - # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g' - # #echo $CMD - # #eval $CMD - #fi - done - echo "====> Done template reolving" -} - - -run_tox_test() -{ - set -x - CURDIR=$(pwd) - TOXINIS=$(find . -name "tox.ini") - for TOXINI in "${TOXINIS[@]}"; do - DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev) - cd "${CURDIR}/${DIR}" - rm -rf ./venv-tox ./.tox - virtualenv ./venv-tox - source ./venv-tox/bin/activate - pip install --upgrade pip - pip install --upgrade tox argparse - pip freeze - tox - deactivate - rm -rf ./venv-tox ./.tox - done -} - -build_wagons() -{ - rm -rf ./*.wgn venv-pkg - - SETUPFILES=$(find . -name "setup.py") - for SETUPFILE in $SETUPFILES; do - PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev) - PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g') - PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g') - - echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION" - - virtualenv ./venv-pkg - source ./venv-pkg/bin/activate - pip install --upgrade pip - pip install wagon - wagon create --format tar.gz "$PLUGIN_DIR" - deactivate - rm -rf venv-pkg - - PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn ) - echo Built package: "${PKG_FILE_NAMES[@]}" - done -} - - -upload_raw_file() -{ - # Extract the username and password to the nexus repo from the settings file - USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE") - PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE") - NETRC=$(mktemp) - echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC" - - REPO="$MVN_RAWREPO_BASEURL_UPLOAD" - - OUTPUT_FILE=$(echo "$1" | sed -e "s/^.\///") - EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev) - if [ "$EXT" == 'yaml' ]; then - OUTPUT_FILE_TYPE='text/x-yaml' - elif [ "$EXT" == 'json' ]; then - OUTPUT_FILE_TYPE='application/json' - elif [ "$EXT" == 'sh' ]; then - OUTPUT_FILE_TYPE='text/x-shellscript' - elif [ "$EXT" == 'gz' ]; then - OUTPUT_FILE_TYPE='application/gzip' - elif [ "$EXT" == 'wgn' ]; then - OUTPUT_FILE_TYPE='application/gzip' - else - OUTPUT_FILE_TYPE='application/octet-stream' - fi - - - if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then - SEND_TO="${REPO}/${MVN_PROJECT_GROUPID}/snapshots" - elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then - SEND_TO="${REPO}/{$MVN_PROJECT_GROUPID}/releases" - else - echo "Unreconfnized deployment type, quit" - exit - fi - if [ ! -z "$MVN_PROJECT_MODULEID" ]; then - SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID" - fi - - echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}" - curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}" - curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}" - curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}" -} - - - -upload_wagons_and_type_yamls() -{ - WAGONS=$(ls -1 ./*.wgn) - for WAGON in $WAGONS ; do - WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-') - WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-') - WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1) - - upload_raw_file "$WAGON" - upload_raw_file "$WAGON_TYPEFILE" - done -} - -upload_files_of_extension() -{ - FILES=$(ls -1 ./*."$1") - for F in $FILES ; do - upload_raw_file "$F" - done -} - - -generate_pypirc_then_publish() -{ - set +x - USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE") - PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE") - - if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then - MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/" - fi - - - cat > ~/.pypirc <<EOL -[distutils] -index-servers = - $MVN_PYPISERVER_SERVERID - -[$MVN_PYPISERVER_SERVERID] -repository: $MVN_PYPISERVER_BASEURL -username: $USER -password: $PASS -EOL - - # this may fail if a package of same version exists - python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID" - set -x -} - - - -build_and_push_docker() -{ - IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}" - IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g') - IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]') - - # use the major and minor version of the MVN artifact version as docker image version - VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}" - VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.') - - LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}" - # build a docker image - docker build --rm -f ./Dockerfile -t "${LFQI}" ./ - - REPO="" - if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then - REPO=$MVN_DOCKERREGISTRY_DAILY - elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then - # there seems to be no staging docker registry? set to use SNAPSHOT also - #REPO=$MVN_DOCKERREGISTRY_RELEASE - REPO=$MVN_DOCKERREGISTRY_DAILY - else - echo "Fail to determine DEPLOYMENT_TYPE" - REPO=$MVN_DOCKERREGISTRY_DAILY - fi - echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO" - - if [ ! -z "$REPO" ]; then - USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE") - PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE") - if [ -z "$USER" ]; then - echo "Error: no user provided" - fi - if [ -z "$PASS" ]; then - echo "Error: no password provided" - fi - [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>" - echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED" - docker login "$REPO" -u "$USER" -p "$PASS" - - if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then - REPO="$REPO/snapshots" - elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then - # there seems to be no staging docker registry? set to use SNAPSHOT also - #REPO=$MVN_DOCKERREGISTRY_RELEASE - REPO="$REPO" - else - echo "Fail to determine DEPLOYMENT_TYPE" - REPO="$REPO/unknown" - fi - - OLDTAG="${LFQI}" - PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest" - for NEWTAG in ${PUSHTAGS} - do - echo "tagging ${OLDTAG} to ${NEWTAG}" - docker tag "${OLDTAG}" "${NEWTAG}" - echo "pushing ${NEWTAG}" - docker push "${NEWTAG}" - OLDTAG="${NEWTAG}" - done - fi - -} - - - |