Son-handler microservice seed code

Change-Id: If4000e26044fe267bdd5fae3a1b2599182423950
Issue-ID: DCAEGEN2-1219
Signed-off-by: Ramya Ravichandran<ramya.ravichandran5@wipro.com>

1 files changed, 0 insertions, 387 deletions

diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh
deleted file mode 100755
index 8354a61..0000000
--- a/mvn-phase-lib.sh
+++ /dev/null
@@ -1,387 +0,0 @@
-#!/bin/bash
-
-# ================================================================================
-# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-
-
-#MVN_PROJECT_MODULEID="$1"
-#MVN_PHASE="$2"
-#PROJECT_ROOT=$(dirname $0)
-
-FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
-if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
-  MVN_PROJECT_MODULEID=""
-fi
-
-if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
-  echo "=> for SNAPSHOT artifact build"
-  MVN_DEPLOYMENT_TYPE='SNAPSHOT'
-else
-  echo "=> for STAGING/RELEASE artifact build"
-  MVN_DEPLOYMENT_TYPE='STAGING'
-fi
-echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
-
-
-TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
-
-# expected environment variables
-if [ -z "${MVN_NEXUSPROXY}" ]; then
-    echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
-    exit
-fi
-MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
-echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
-
-if [ -z "$WORKSPACE" ]; then
-    WORKSPACE=$(pwd)
-fi
-
-if [ -z "$SETTINGS_FILE" ]; then
-    echo "SETTINGS_FILE environment variable not set.  Cannot proceed"
-    exit
-fi
-
-
-
-# mvn phase in life cycle
-MVN_PHASE="$2"
-
-echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
-echo "MVN_PHASE is                       [$MVN_PHASE]"
-echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
-echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
-echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
-echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
-echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
-echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
-MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
-echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
-echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
-echo "MVN_DOCKERREGISTRY_DAILY is        [$MVN_DOCKERREGISTRY_DAILY]"
-echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
-
-echo "MVN_PYPISERVER_SERVERID            [$MVN_PYPISERVER_SERVERID]"
-echo "MVN_PYPISERVER_BASEURL is          [$MVN_PYPISERVER_BASEURL]"
-
-
-
-clean_templated_files() 
-{
-  TEMPLATE_FILES=$(find . -name "*-template")
-  for F in $TEMPLATE_FILES; do
-    F2=$(echo "$F" | sed 's/-template$//')
-    rm -f "$F2"
-  done
-}
-clean_tox_files() 
-{
-  TOX_FILES=$(find . -name ".tox")
-  TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
-  for F in $TOX_FILES; do
-    rm -rf "$F"
-  done
-}
-
-expand_templates() 
-{
-  # set up env variables, get ready for template resolution
-  # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
- 
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
-
-  export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="$MVN_PYPISERVER_BASEURL"
-
-  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY"
-  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots"
-
-
-  TEMPLATE_FILES=$(find . -name "*-template")
-  for F in $TEMPLATE_FILES; do
-    F2=$(echo "$F" | sed 's/-template$//')
-    cp "$F" "$F2"
-    MOD=$(stat --format '%a' "$F")
-    chmod "$MOD" "$F2"
-  done
-   
-
-  TEMPLATES=$(env |grep ONAPTEMPLATE)
-  if [ -z "$TEMPLATES" ]; then
-    return 0
-  fi
-
-  echo "====> Resolving the following temaplate from environment variables "
-  echo "[$TEMPLATES]"
-  SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
-  for TEMPLATE in $TEMPLATES; do
-    KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
-    VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
-    VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
-    set +e
-    FILES=$(grep -rl "$KEY")
-    set -e
-
-    if [ -z "$FILES" ]; then
-      continue
-    fi
-
-    # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
-    for F in $FILES; do
-      if [[ $F == *"$SELFFILE" ]]; then
-        continue
-      fi
-      if [[ "$F" == *-template ]]; then
-        continue
-      fi
-
-      echo "======> Resolving template $KEY to value $VALUE for file $F"
-      sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
-      #cat "$F"
-    done
-
-    #if [ ! -z "$FILES" ]; then
-    #   echo "====> Resolving template $VALUE to value $VALUE"
-    #   #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
-    #   grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
-    #   #echo $CMD
-    #   #eval $CMD
-    #fi
-  done
-  echo "====> Done template reolving"
-}
-
-
-run_tox_test() 
-{ 
-  set -x
-  CURDIR=$(pwd)
-  TOXINIS=$(find . -name "tox.ini")
-  for TOXINI in "${TOXINIS[@]}"; do
-    DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
-    cd "${CURDIR}/${DIR}"
-    rm -rf ./venv-tox ./.tox
-    virtualenv ./venv-tox
-    source ./venv-tox/bin/activate
-    pip install --upgrade pip
-    pip install --upgrade tox argparse
-    pip freeze
-    tox
-    deactivate
-    rm -rf ./venv-tox ./.tox
-  done
-}
-
-build_wagons() 
-{
-  rm -rf ./*.wgn venv-pkg
-
-  SETUPFILES=$(find . -name "setup.py")
-  for SETUPFILE in $SETUPFILES; do
-    PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev)
-    PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
-    PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-
-    echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION"
-
-    virtualenv ./venv-pkg
-    source ./venv-pkg/bin/activate
-    pip install --upgrade pip
-    pip install wagon
-    wagon create --format tar.gz "$PLUGIN_DIR"
-    deactivate
-    rm -rf venv-pkg
-
-    PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
-    echo Built package: "${PKG_FILE_NAMES[@]}"
-  done
-}
-
-
-upload_raw_file() 
-{
-  # Extract the username and password to the nexus repo from the settings file
-  USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
-  PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
-  NETRC=$(mktemp)
-  echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
-
-  REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
-
-  OUTPUT_FILE=$(echo "$1" | sed -e "s/^.\///")
-  EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
-  if [ "$EXT" == 'yaml' ]; then
-    OUTPUT_FILE_TYPE='text/x-yaml'
-  elif [ "$EXT" == 'json' ]; then
-    OUTPUT_FILE_TYPE='application/json'
-  elif [ "$EXT" == 'sh' ]; then
-    OUTPUT_FILE_TYPE='text/x-shellscript'
-  elif [ "$EXT" == 'gz' ]; then
-    OUTPUT_FILE_TYPE='application/gzip'
-  elif [ "$EXT" == 'wgn' ]; then
-    OUTPUT_FILE_TYPE='application/gzip'
-  else
-    OUTPUT_FILE_TYPE='application/octet-stream'
-  fi
-
-
-  if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
-    SEND_TO="${REPO}/${MVN_PROJECT_GROUPID}/snapshots"
-  elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
-    SEND_TO="${REPO}/{$MVN_PROJECT_GROUPID}/releases"
-  else
-    echo "Unreconfnized deployment type, quit"
-    exit
-  fi
-  if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
-    SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
-  fi
-
-  echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
-  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}"
-  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}"
-  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
-}
-
-
-
-upload_wagons_and_type_yamls()
-{
-  WAGONS=$(ls -1 ./*.wgn)
-  for WAGON in $WAGONS ; do
-    WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-')
-    WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-')
-    WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1)
-   
-    upload_raw_file "$WAGON"
-    upload_raw_file "$WAGON_TYPEFILE"
-  done
-}
-
-upload_files_of_extension()
-{
-  FILES=$(ls -1 ./*."$1")
-  for F in $FILES ; do
-    upload_raw_file "$F"
-  done
-}
-
-
-generate_pypirc_then_publish() 
-{
-  set +x
-  USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
-  PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
-
-  if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
-    MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
-  fi
- 
-
-  cat > ~/.pypirc <<EOL
-[distutils]
-index-servers = 
-  $MVN_PYPISERVER_SERVERID
- 
-[$MVN_PYPISERVER_SERVERID]
-repository: $MVN_PYPISERVER_BASEURL
-username: $USER
-password: $PASS
-EOL
-
-  # this may fail if a package of same version exists
-  python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
-  set -x
-}
-
-
-
-build_and_push_docker()
-{
-  IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
-  IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
-  IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
-
-  # use the major and minor version of the MVN artifact version as docker image version
-  VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
-  VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
-
-  LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
-  # build a docker image
-  docker build --rm -f ./Dockerfile -t "${LFQI}" ./
-
-  REPO=""
-  if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
-     REPO=$MVN_DOCKERREGISTRY_DAILY
-  elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
-     # there seems to be no staging docker registry?  set to use SNAPSHOT also
-     #REPO=$MVN_DOCKERREGISTRY_RELEASE
-     REPO=$MVN_DOCKERREGISTRY_DAILY
-  else
-     echo "Fail to determine DEPLOYMENT_TYPE"
-     REPO=$MVN_DOCKERREGISTRY_DAILY
-  fi
-  echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
-
-  if [ ! -z "$REPO" ]; then
-    USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
-    PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
-    if [ -z "$USER" ]; then
-      echo "Error: no user provided"
-    fi
-    if [ -z "$PASS" ]; then
-      echo "Error: no password provided"
-    fi
-    [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
-    echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
-    docker login "$REPO" -u "$USER" -p "$PASS"
-
-    if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
-      REPO="$REPO/snapshots"
-    elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
-      # there seems to be no staging docker registry?  set to use SNAPSHOT also
-      #REPO=$MVN_DOCKERREGISTRY_RELEASE
-      REPO="$REPO"
-    else
-      echo "Fail to determine DEPLOYMENT_TYPE"
-      REPO="$REPO/unknown"
-    fi
-
-    OLDTAG="${LFQI}"
-    PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
-    for NEWTAG in ${PUSHTAGS}
-    do
-      echo "tagging ${OLDTAG} to ${NEWTAG}"
-      docker tag "${OLDTAG}" "${NEWTAG}"
-      echo "pushing ${NEWTAG}"
-      docker push "${NEWTAG}"
-      OLDTAG="${NEWTAG}"
-    done
-  fi
-
-}
-
-
-