summaryrefslogtreecommitdiffstats
path: root/mvn-phase-lib.sh
diff options
context:
space:
mode:
authorLusheng Ji <lji@research.att.com>2017-10-10 03:29:34 +0000
committerLusheng Ji <lji@research.att.com>2017-10-10 04:26:47 +0000
commit96e3b9dc1f664bf0a65cb88d7dbc04681ee86f67 (patch)
treee1ad20489ffbcb4bd33dc492e733566db2b5d82f /mvn-phase-lib.sh
parent527c5898823398d3f8bd1306e4902214bfd3dbe7 (diff)
Change artifact deployment locations
Issue-Id: DCAEGEN2-128 Change-Id: I55f533c0fa1a2a51e6a11b1e8e1dbb221b992fbe Signed-off-by: Lusheng Ji <lji@research.att.com>
Diffstat (limited to 'mvn-phase-lib.sh')
-rwxr-xr-xmvn-phase-lib.sh424
1 files changed, 424 insertions, 0 deletions
diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh
new file mode 100755
index 0000000..67857df
--- /dev/null
+++ b/mvn-phase-lib.sh
@@ -0,0 +1,424 @@
+#!/bin/bash
+
+# ================================================================================
+# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+
+#MVN_PROJECT_MODULEID="$1"
+#MVN_PHASE="$2"
+#PROJECT_ROOT=$(dirname $0)
+
+FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
+if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
+ MVN_PROJECT_MODULEID=""
+fi
+
+if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
+ echo "=> for SNAPSHOT artifact build"
+ MVN_DEPLOYMENT_TYPE='SNAPSHOT'
+else
+ echo "=> for STAGING/RELEASE artifact build"
+ MVN_DEPLOYMENT_TYPE='STAGING'
+fi
+echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]"
+
+
+TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
+
+# expected environment variables
+if [ -z "${MVN_NEXUSPROXY}" ]; then
+ echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed"
+ exit
+fi
+MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
+echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
+
+if [ -z "$WORKSPACE" ]; then
+ WORKSPACE=$(pwd)
+fi
+
+if [ -z "$SETTINGS_FILE" ]; then
+ echo "SETTINGS_FILE environment variable not set. Cannot proceed"
+ exit
+fi
+
+
+
+# mvn phase in life cycle
+MVN_PHASE="$2"
+
+echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]"
+echo "MVN_PHASE is [$MVN_PHASE]"
+echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]"
+echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]"
+echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]"
+echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]"
+echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]"
+echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
+MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
+echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]"
+echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]"
+echo "MVN_DOCKERREGISTRY_SNAPSHOT is [$MVN_DOCKERREGISTRY_SNAPSHOT]"
+echo "MVN_DOCKERREGISTRY_PUBLIC is [$MVN_DOCKERREGISTRY_PUBLIC]"
+echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]"
+
+echo "MVN_PYPISERVER_SERVERID [$MVN_PYPISERVER_SERVERID]"
+echo "MVN_PYPISERVER_BASEURL is [$MVN_PYPISERVER_BASEURL]"
+
+
+
+clean_templated_files()
+{
+ TEMPLATE_FILES=$(find . -name "*-template")
+ for F in $TEMPLATE_FILES; do
+ F2=$(echo "$F" | sed 's/-template$//')
+ rm -f "$F2"
+ done
+}
+clean_tox_files()
+{
+ TOX_FILES=$(find . -name ".tox")
+ TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
+ for F in $TOX_FILES; do
+ rm -rf "$F"
+ done
+}
+
+expand_templates()
+{
+ # set up env variables, get ready for template resolution
+ # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
+
+ export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
+
+ # docker registry templates are for poll, so use PUBLIC registry
+ export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_PUBLIC"
+ export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}/snapshots"
+
+
+ TEMPLATE_FILES=$(find . -name "*-template")
+ for F in $TEMPLATE_FILES; do
+ F2=$(echo "$F" | sed 's/-template$//')
+ cp "$F" "$F2"
+ MOD=$(stat --format '%a' "$F")
+ chmod "$MOD" "$F2"
+ done
+
+
+ TEMPLATES=$(env |grep ONAPTEMPLATE)
+ if [ -z "$TEMPLATES" ]; then
+ return 0
+ fi
+
+ echo "====> Resolving the following temaplate from environment variables "
+ echo "[$TEMPLATES]"
+ SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
+ for TEMPLATE in $TEMPLATES; do
+ KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
+ VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
+ VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
+ set +e
+ FILES=$(grep -rl "$KEY")
+ set -e
+
+ if [ -z "$FILES" ]; then
+ continue
+ fi
+
+ # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
+ for F in $FILES; do
+ if [[ $F == *"$SELFFILE" ]]; then
+ continue
+ fi
+ if [[ "$F" == *-template ]]; then
+ continue
+ fi
+
+ echo "======> Resolving template $KEY to value $VALUE for file $F"
+ sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
+ #cat "$F"
+ done
+
+ #if [ ! -z "$FILES" ]; then
+ # echo "====> Resolving template $VALUE to value $VALUE"
+ # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
+ # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
+ # #echo $CMD
+ # #eval $CMD
+ #fi
+ done
+ echo "====> Done template reolving"
+}
+
+
+run_tox_test()
+{
+ set -x
+ CURDIR=$(pwd)
+ TOXINIS=$(find . -name "tox.ini")
+ for TOXINI in "${TOXINIS[@]}"; do
+ DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
+ cd "${CURDIR}/${DIR}"
+ rm -rf ./venv-tox ./.tox
+ virtualenv ./venv-tox
+ source ./venv-tox/bin/activate
+ pip install --upgrade pip
+ pip install --upgrade tox argparse
+ pip freeze
+ tox
+ deactivate
+ rm -rf ./venv-tox ./.tox
+ done
+}
+
+build_wagons()
+{
+ rm -rf ./*.wgn venv-pkg
+ SETUPFILES=$(find . -name "setup.py")
+
+ virtualenv ./venv-pkg
+ source ./venv-pkg/bin/activate
+ pip install --upgrade pip
+ pip install wagon
+
+ CURDIR=$(pwd)
+ for SETUPFILE in $SETUPFILES; do
+ PLUGIN_DIR=$(dirname "$SETUPFILE")
+ PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+ PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+
+ echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
+
+ wagon create --format tar.gz "${PLUGIN_DIR}"
+
+ PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
+ echo Built package: "${PKG_FILE_NAMES[@]}"
+ cd $CURDIR
+ done
+
+ deactivate
+ rm -rf venv-pkg
+}
+
+
+upload_raw_file()
+{
+ # Extract the username and password to the nexus repo from the settings file
+ USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
+ NETRC=$(mktemp)
+ echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
+
+ REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
+
+ OUTPUT_FILE=$1
+ EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
+ if [ "$EXT" == 'yaml' ]; then
+ OUTPUT_FILE_TYPE='text/x-yaml'
+ elif [ "$EXT" == 'sh' ]; then
+ OUTPUT_FILE_TYPE='text/x-shellscript'
+ elif [ "$EXT" == 'gz' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ elif [ "$EXT" == 'wgn' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ else
+ OUTPUT_FILE_TYPE='application/octet-stream'
+ fi
+
+
+ if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
+ SEND_TO="${REPO}/${FQDN}/snapshots"
+ elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
+ SEND_TO="${REPO}/${FQDN}/releases"
+ else
+ echo "Unreconfnized deployment type, quit"
+ exit
+ fi
+ #if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
+ # SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
+ #fi
+ if [ ! -z "$2" ]; then
+ SEND_TO="$SEND_TO/$2"
+ fi
+
+ echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
+}
+
+
+
+upload_wagons_and_type_yamls()
+{
+ SETUPFILES=$(find . -name "setup.py")
+
+ CURDIR=$(pwd)
+ for SETUPFILE in $SETUPFILES; do
+ PLUGIN_DIR=$(dirname "$SETUPFILE")
+ PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+ PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+ PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
+ PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
+
+ echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
+
+ TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':')
+ if [ -z "$TYPEFILE_NAME" ]; then
+ echo "!!! No typefile found with matching package name $PLUGIN_NAME"
+ exit -1
+ fi
+ NEWFILENAME="${PLUGIN_NAME}"_types.yaml
+ if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
+ echo "copy typefile to standard naming"
+ cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
+ fi
+
+ TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' $TYPEFILE_NAME |cut -f2 -d ':' |sed -r 's/\s+//g')
+ WAGONFILE_NAME=$(ls -1 $PLUGIN_NAME-$TYPEFILE_PACKAGE_VERSION-*.wgn)
+ if [ -z "$WAGONFILE_NAME" ]; then
+ echo "!!! No wagonfile found with matching package name and version as required in typefile: "
+ echo " $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
+ exit -1
+ fi
+
+ echo upload_raw_file "$NEWFILENAME" type_files/${PLUGIN_NAME}/${PLUGIN_VERSION_MAJOR}
+ echo upload_raw_file "$NEWFILENAME" type_files/${PLUGIN_NAME}/${PLUGIN_VERSION_MAJOR_MINOR}
+ echo upload_raw_file "${WAGONFILE_NAME}" "plugins/${PLUGIN_NAME}"
+
+ rm -r $WAGONFILE_NAME
+ if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
+ rm -f "$NEWFILENAME"
+ fi
+ done
+}
+
+upload_files_of_extension()
+{
+ FILES=$(ls -1 ./*."$1")
+ for F in $FILES ; do
+ upload_raw_file "$F"
+ done
+}
+
+
+generate_pypirc_then_publish()
+{
+ set +x
+ USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
+
+ if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
+ MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
+ fi
+
+
+ cat > ~/.pypirc <<EOL
+[distutils]
+index-servers =
+ $MVN_PYPISERVER_SERVERID
+
+[$MVN_PYPISERVER_SERVERID]
+repository: $MVN_PYPISERVER_BASEURL
+username: $USER
+password: $PASS
+EOL
+
+ # this may fail if a package of same version exists
+ python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
+ set -x
+}
+
+
+
+build_and_push_docker()
+{
+ IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
+ IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
+ IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
+
+ # use the major and minor version of the MVN artifact version as docker image version
+ VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
+ VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
+
+ LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
+ # build a docker image
+ docker build --rm -f ./Dockerfile -t "${LFQI}" ./
+
+ REPO=""
+ if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+ REPO=$MVN_DOCKERREGISTRY_SNASHOT
+ elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+ # there seems to be no staging docker registry? set to use SNAPSHOT also
+ REPO=$MVN_DOCKERREGISTRY_RELEASE
+ else
+ echo "Fail to determine DEPLOYMENT_TYPE"
+ REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
+ fi
+ echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
+
+ if [ ! -z "$REPO" ]; then
+ USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
+ if [ -z "$USER" ]; then
+ echo "Error: no user provided"
+ fi
+ if [ -z "$PASS" ]; then
+ echo "Error: no password provided"
+ fi
+ [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
+ echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
+ docker login "$REPO" -u "$USER" -p "$PASS"
+
+ if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+ REPO="$REPO/snapshots"
+ elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+ # there seems to be no staging docker registry? set to use SNAPSHOT also
+ #REPO=$MVN_DOCKERREGISTRY_RELEASE
+ REPO="$REPO"
+ else
+ echo "Fail to determine DEPLOYMENT_TYPE"
+ REPO="$REPO/unknown"
+ fi
+
+ OLDTAG="${LFQI}"
+ PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
+ for NEWTAG in ${PUSHTAGS}
+ do
+ echo "tagging ${OLDTAG} to ${NEWTAG}"
+ docker tag "${OLDTAG}" "${NEWTAG}"
+ echo "pushing ${NEWTAG}"
+ docker push "${NEWTAG}"
+ OLDTAG="${NEWTAG}"
+ done
+ fi
+
+}
+
+
+