1 files changed, 451 insertions, 0 deletions
diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh
new file mode 100755
index 0000000..a71d316
--- /dev/null
+++ b/mvn-phase-lib.sh
@@ -0,0 +1,451 @@
+#!/bin/bash
+
+# ================================================================================
+# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+
+#MVN_PROJECT_MODULEID="$1"
+#MVN_PHASE="$2"
+#PROJECT_ROOT=$(dirname $0)
+
+FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
+if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
+  MVN_PROJECT_MODULEID=""
+fi
+
+if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
+  echo "=> for SNAPSHOT artifact build"
+  MVN_DEPLOYMENT_TYPE='SNAPSHOT'
+else
+  echo "=> for STAGING/RELEASE artifact build"
+  MVN_DEPLOYMENT_TYPE='STAGING'
+fi
+echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
+
+
+TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
+
+# expected environment variables
+if [ -z "${MVN_NEXUSPROXY}" ]; then
+    echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
+    exit
+fi
+MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
+echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
+
+if [ -z "$WORKSPACE" ]; then
+    WORKSPACE=$(pwd)
+fi
+
+if [ -z "$SETTINGS_FILE" ]; then
+    echo "SETTINGS_FILE environment variable not set.  Cannot proceed"
+    exit
+fi
+
+
+
+# mvn phase in life cycle
+MVN_PHASE="$2"
+
+echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
+echo "MVN_PHASE is                       [$MVN_PHASE]"
+echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
+echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
+echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
+echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
+echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
+echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
+MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
+echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
+echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
+echo "MVN_DOCKERREGISTRY_SNAPSHOT is     [$MVN_DOCKERREGISTRY_SNAPSHOT]"
+echo "MVN_DOCKERREGISTRY_PUBLIC is       [$MVN_DOCKERREGISTRY_PUBLIC]"
+echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
+
+echo "MVN_PYPISERVER_SERVERID            [$MVN_PYPISERVER_SERVERID]"
+echo "MVN_PYPISERVER_BASEURL is          [$MVN_PYPISERVER_BASEURL]"
+
+
+
+clean_templated_files() 
+{
+  TEMPLATE_FILES=$(find . -name "*-template")
+  for F in $TEMPLATE_FILES; do
+    F2=$(echo "$F" | sed 's/-template$//')
+    rm -f "$F2"
+  done
+}
+clean_tox_files() 
+{
+  TOX_FILES=$(find . -name ".tox")
+  TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
+  for F in $TOX_FILES; do
+    rm -rf "$F"
+  done
+}
+
+expand_templates() 
+{
+  # set up env variables, get ready for template resolution
+  # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+ 
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
+  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
+
+  export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
+
+  # docker registry templates are for poll, so use PUBLIC registry
+  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_PUBLIC"
+  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}/snapshots"
+
+
+  TEMPLATE_FILES=$(find . -name "*-template")
+  for F in $TEMPLATE_FILES; do
+    F2=$(echo "$F" | sed 's/-template$//')
+    cp "$F" "$F2"
+    MOD=$(stat --format '%a' "$F")
+    chmod "$MOD" "$F2"
+  done
+   
+
+  TEMPLATES=$(env |grep ONAPTEMPLATE)
+  if [ -z "$TEMPLATES" ]; then
+    return 0
+  fi
+
+  echo "====> Resolving the following temaplate from environment variables "
+  echo "[$TEMPLATES]"
+  SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
+  for TEMPLATE in $TEMPLATES; do
+    KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
+    VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
+    VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
+    set +e
+    FILES=$(grep -rl "$KEY")
+    set -e
+
+    if [ -z "$FILES" ]; then
+      continue
+    fi
+
+    # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
+    for F in $FILES; do
+      if [[ $F == *"$SELFFILE" ]]; then
+        continue
+      fi
+      if [[ "$F" == *-template ]]; then
+        continue
+      fi
+
+      echo "======> Resolving template $KEY to value $VALUE for file $F"
+      sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
+      #cat "$F"
+    done
+
+    #if [ ! -z "$FILES" ]; then
+    #   echo "====> Resolving template $VALUE to value $VALUE"
+    #   #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
+    #   grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
+    #   #echo $CMD
+    #   #eval $CMD
+    #fi
+  done
+  echo "====> Done template reolving"
+}
+
+test_templates()
+{
+    # make certain that the type references exist
+    TMP=$(mktemp)
+    trap 'rm -f $TMP' 0 1 2 3 15
+    find . -name '*-template' | sed -e 's/-template$//' |
+    while read file
+    do
+        egrep '^  - .?https?://' < $file
+    done  | awk '{print $2}' | sed -e 's/"//g' | sort -u |
+    while read url
+    do
+	curl -L -w '%{http_code}' -s -o /dev/null "$url" > $TMP
+	case $(< $TMP) in
+	    2* ) ;;
+	    * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
+	esac
+    done
+}
+
+
+run_tox_test() 
+{ 
+  set -x
+  CURDIR=$(pwd)
+  TOXINIS=$(find . -name "tox.ini")
+  for TOXINI in "${TOXINIS[@]}"; do
+    DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
+    cd "${CURDIR}/${DIR}"
+    rm -rf ./venv-tox ./.tox
+    virtualenv ./venv-tox
+    source ./venv-tox/bin/activate
+    pip install --upgrade pip
+    pip install --upgrade tox argparse
+    pip freeze
+    tox
+    deactivate
+    rm -rf ./venv-tox ./.tox
+  done
+}
+
+build_wagons() 
+{
+  rm -rf ./*.wgn venv-pkg
+  SETUPFILES=$(find . -name "setup.py")
+  
+  virtualenv ./venv-pkg
+  source ./venv-pkg/bin/activate
+  pip install --upgrade pip 
+  pip install wagon
+  
+  CURDIR=$(pwd)
+  for SETUPFILE in $SETUPFILES; do
+    PLUGIN_DIR=$(dirname "$SETUPFILE")
+    PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+    PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+
+    echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
+
+    wagon create --format tar.gz "${PLUGIN_DIR}"
+
+    PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
+    echo Built package: "${PKG_FILE_NAMES[@]}"
+    cd $CURDIR
+  done
+
+  deactivate
+  rm -rf venv-pkg
+}
+
+
+upload_raw_file() 
+{
+  # Extract the username and password to the nexus repo from the settings file
+  USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
+  PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
+  NETRC=$(mktemp)
+  echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
+
+  REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
+
+  OUTPUT_FILE=$1
+  EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
+  if [ "$EXT" == 'yaml' ]; then
+    OUTPUT_FILE_TYPE='text/x-yaml'
+  elif [ "$EXT" == 'sh' ]; then
+    OUTPUT_FILE_TYPE='text/x-shellscript'
+  elif [ "$EXT" == 'gz' ]; then
+    OUTPUT_FILE_TYPE='application/gzip'
+  elif [ "$EXT" == 'wgn' ]; then
+    OUTPUT_FILE_TYPE='application/gzip'
+  else
+    OUTPUT_FILE_TYPE='application/octet-stream'
+  fi
+
+  # for multi module projects, the raw repo path must match with project name, not project + module
+  # FQDN is project + module
+  # GROUPID is project name
+  if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
+    PROJECT_NAME=${MVN_PROJECT_GROUPID}
+  else
+    PROJECT_NAME=${FQDN}
+  fi
+  if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
+    SEND_TO="${REPO}/${PROJECT_NAME}/snapshots"
+  elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
+    SEND_TO="${REPO}/${PROJECT_NAME}/releases"
+  else
+    echo "Unreconfnized deployment type, quit"
+    exit
+  fi
+  #if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
+  #  SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
+  #fi
+  if [ ! -z "$2" ]; then
+    SEND_TO="$SEND_TO/$2"
+  fi
+
+  echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
+  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
+  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
+}
+
+
+
+upload_wagons_and_type_yamls()
+{
+  SETUPFILES=$(find . -name "setup.py")
+
+  CURDIR=$(pwd)
+  for SETUPFILE in $SETUPFILES; do
+    PLUGIN_DIR=$(dirname "$SETUPFILE")
+    PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+    PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+    PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
+    PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
+
+    echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
+
+    TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':')
+    if [ -z "$TYPEFILE_NAME" ]; then
+      echo "!!! No typefile found with matching package name $PLUGIN_NAME"
+      exit -1
+    fi
+    NEWFILENAME="${PLUGIN_NAME}"_types.yaml
+    if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
+      echo "copy typefile to standard naming"
+      cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
+    fi
+
+    TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' $TYPEFILE_NAME |cut -f2 -d ':' |sed -r 's/\s+//g')
+    WAGONFILE_NAME=$(ls -1 $PLUGIN_NAME-$TYPEFILE_PACKAGE_VERSION-*.wgn)
+    if [ -z "$WAGONFILE_NAME" ]; then
+      echo "!!! No wagonfile found with matching package name and version as required in typefile: "
+      echo "    $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
+      exit -1
+    fi
+
+    upload_raw_file "$NEWFILENAME" type_files/${PLUGIN_NAME}/${PLUGIN_VERSION_MAJOR}
+    upload_raw_file "$NEWFILENAME" type_files/${PLUGIN_NAME}/${PLUGIN_VERSION_MAJOR_MINOR}
+    upload_raw_file "${WAGONFILE_NAME}" "plugins/${PLUGIN_NAME}"
+   
+    rm -r $WAGONFILE_NAME
+    if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
+      rm -f "$NEWFILENAME"
+    fi
+  done
+}
+
+upload_files_of_extension()
+{
+  FILES=$(ls -1 ./*."$1")
+  for F in $FILES ; do
+    upload_raw_file "$F"
+  done
+}
+
+
+generate_pypirc_then_publish() 
+{
+  set +x
+  USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
+  PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
+
+  if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
+    MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
+  fi
+ 
+
+  cat > ~/.pypirc <<EOL
+[distutils]
+index-servers = 
+  $MVN_PYPISERVER_SERVERID
+ 
+[$MVN_PYPISERVER_SERVERID]
+repository: $MVN_PYPISERVER_BASEURL
+username: $USER
+password: $PASS
+EOL
+
+  # this may fail if a package of same version exists
+  python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
+  set -x
+}
+
+
+
+build_and_push_docker()
+{
+  IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
+  IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
+  IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
+
+  # use the major and minor version of the MVN artifact version as docker image version
+  VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
+  VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
+
+  LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
+  # build a docker image
+  docker build --rm -f ./Dockerfile -t "${LFQI}" ./
+
+  REPO=""
+  if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+     REPO=$MVN_DOCKERREGISTRY_SNASHOT
+  elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+     # there seems to be no staging docker registry?  set to use SNAPSHOT also
+     REPO=$MVN_DOCKERREGISTRY_RELEASE
+  else
+     echo "Fail to determine DEPLOYMENT_TYPE"
+     REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
+  fi
+  echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
+
+  if [ ! -z "$REPO" ]; then
+    USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
+    PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
+    if [ -z "$USER" ]; then
+      echo "Error: no user provided"
+    fi
+    if [ -z "$PASS" ]; then
+      echo "Error: no password provided"
+    fi
+    [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
+    echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
+    docker login "$REPO" -u "$USER" -p "$PASS"
+
+    if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+      REPO="$REPO/snapshots"
+    elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+      # there seems to be no staging docker registry?  set to use SNAPSHOT also
+      #REPO=$MVN_DOCKERREGISTRY_RELEASE
+      REPO="$REPO"
+    else
+      echo "Fail to determine DEPLOYMENT_TYPE"
+      REPO="$REPO/unknown"
+    fi
+
+    OLDTAG="${LFQI}"
+    PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
+    for NEWTAG in ${PUSHTAGS}
+    do
+      echo "tagging ${OLDTAG} to ${NEWTAG}"
+      docker tag "${OLDTAG}" "${NEWTAG}"
+      echo "pushing ${NEWTAG}"
+      docker push "${NEWTAG}"
+      OLDTAG="${NEWTAG}"
+    done
+  fi
+
+}
+
+
+