Move k8s-bootstrap container to blueprints repo1.9.0

Cleanup of unnecessary input templates and other files
Use non-templatized blueprints instead of blueprint templates
Copy blueprints from blueprints/ directory into image
Move reference_templates to top-level directory

Issue-ID: DCAEGEN2-2041
Signed-off-by: Jack Lucas <jflucas@research.att.com>
Change-Id: Ib846a96a4995eb97383f63ff764705e6277a24b0

1 files changed, 233 insertions, 0 deletions

diff --git a/scripts/bootstrap.sh b/scripts/bootstrap.sh
new file mode 100755
index 0000000..e47ccd6
--- /dev/null
+++ b/scripts/bootstrap.sh
@@ -0,0 +1,233 @@
+#!/bin/bash
+# ================================================================================
+# Copyright (c) 2018-2020 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+# Install DCAE via Cloudify Manager
+# Expects:
+#   CM address (IP or DNS) in CMADDR environment variable
+#   CM password in CMPASS environment variable (assumes user is "admin")
+#   ONAP common Kubernetes namespace in ONAP_NAMESPACE environment variable
+#   If DCAE components are deployed in a separate Kubernetes namespace, that namespace in DCAE_NAMESPACE variable.
+#   Consul address with port in CONSUL variable
+#   Plugin wagon files in /wagons
+# 	Blueprints for components to be installed in /blueprints
+#   Input files for components to be installed in /inputs
+#   Configuration JSON files that need to be loaded into Consul in /dcae-configs
+#   Consul is installed in /opt/consul/bin/consul, with base config in /opt/consul/config/00consul.json
+# Optionally, allows:
+#   CM protocol in CMPROTO environment variable (defaults to HTTP)
+#   CM port in CMPORT environment variable (defaults to 80)
+# If CMPROTO is set to "https", bootstrap will use HTTPS to communicate with CM.  Otherwise,
+# it will use HTTP.
+# If CMPROTO is set to "https", the script assumes the CA cert needed to verify the cert
+# presented by CM is mounted at /certs/cacert.pem.
+
+# Set defaults for CM protocol and port
+CMPROTO=${CMPROTO:-http}
+CMPORT=${CMPORT:-80}
+
+# Set up additional parameters for using HTTPS
+CFYTLS=""
+CURLTLS=""
+if [ $CMPROTO = "https" ]
+then
+    CFYTLS="--rest-certificate /certs/cacert.pem --ssl"
+    CURLTLS="--cacert /certs/cacert.pem"
+fi
+
+### FUNCTION DEFINITIONS ###
+
+# keep_running: Keep running after bootstrap finishes or after error
+keep_running() {
+    echo $1
+    sleep infinity &
+    wait
+}
+
+# cm_hasany: Query Cloudify Manager and return 0 (true) if there are any entities matching the query
+# Used to see if something is already present on CM
+# $1 -- query fragment, for instance "plugins?archive_name=xyz.wgn" to get
+#  the number of plugins that came from the archive file "xyz.wgn"
+function cm_hasany {
+    # We use _include=id to limit the amount of data the CM sends back
+    # We rely on the "metadata.pagination.total" field in the response
+    # for the total number of matching entities
+    COUNT=$(curl -Ss -H "Tenant: default_tenant" --user admin:${CMPASS} ${CURLTLS} "${CMPROTO}://${CMADDR}:${CMPORT}/api/v3.1/$1&_include=id" \
+             | /bin/jq .metadata.pagination.total)
+    if (( $COUNT > 0 ))
+    then
+        return 0
+    else
+        return 1
+    fi
+}
+
+# deploy: Deploy components if they're not already deployed
+# $1 -- name (for bp and deployment)
+# $2 -- blueprint file name
+# $3 -- inputs file name (optional)
+function deploy {
+    # Don't crash the script on error
+    set +e
+
+    # Upload blueprint if it's not already there
+    if cm_hasany "blueprints?id=$1"
+    then
+        echo blueprint $1 is already installed on ${CMADDR}
+    else
+        cfy blueprints upload -b $1  /blueprints/$2
+    fi
+
+    # Create deployment if it doesn't already exist
+    if cm_hasany "deployments?id=$1"
+    then
+       echo deployment $1 has already been created on ${CMADDR}
+    else
+        INPUTS=
+        if [ -n "$3" ]
+        then
+            INPUTS="-i/inputs/$3"
+        fi
+        cfy deployments create -b $1 ${INPUTS} $1
+    fi
+
+    # Run the install workflow if it hasn't been run already
+    # We don't have a completely certain way of determining this.
+    # We check to see if the deployment has any node instances
+    # that are in the 'uninitialized' or 'deleted' states.  (Note that
+    # the & in the query acts as a logical OR for the multiple state values.)
+    # We'll try to install when a deployment has node instances in those states
+    if cm_hasany "node-instances?deployment_id=$1&state=uninitialized&state=deleted"
+    then
+        cfy executions start -d $1 install
+    else
+        echo deployment $1 appears to have had an install workflow executed already or is not ready for an install
+    fi
+}
+
+# Install plugin if it's not already installed
+# $1 -- path to wagon file for plugin
+function install_plugin {
+    ARCHIVE=$(basename $1)
+    # See if it's already installed
+    if cm_hasany "plugins?archive_name=$ARCHIVE"
+    then
+        echo plugin $1 already installed on ${CMADDR}
+    else
+        cfy plugin upload $1
+    fi
+}
+
+### END FUNCTION DEFINTIONS ###
+
+set -x
+
+# Make sure we keep the container alive after an error
+trap keep_running ERR
+
+set -e
+
+# Consul service registration data
+CBS_REG='{"ID": "dcae-cbs0", "Name": "config_binding_service", "Address": "config-binding-service", "Port": 10000}'
+CBS_REG1='{"ID": "dcae-cbs1", "Name": "config-binding-service", "Address": "config-binding-service", "Port": 10000}'
+
+# Set up profile to access Cloudify Manager
+cfy profiles use -u admin -t default_tenant -p "${CMPASS}" ${CFYTLS} "${CMADDR}"
+
+# Output status, for debugging purposes
+cfy status
+
+# Check Consul readiness
+# The readiness container waits for a "consul-server" container to be ready,
+# but this isn't always enough.  We need the Consul API to be up and for
+# the cluster to be formed, otherwise our Consul accesses might fail.
+# (Note in ONAP R2, we never saw a problem, but occasionally in R3 we
+# have seen Consul not be fully ready, so we add these checks, originally
+# used in the R1 HEAT-based deployment.)
+# Wait for Consul API to come up
+until curl http://${CONSUL}/v1/agent/services
+do
+    echo Waiting for Consul API
+    sleep 60
+done
+# Wait for a leader to be elected
+until [[ "$(curl -Ss http://{$CONSUL}/v1/status/leader)" != '""' ]]
+do
+    echo Waiting for leader
+    sleep 30
+done
+
+# Load configurations into Consul KV store
+for config in /dcae-configs/*.json
+do
+    # The basename of the file is the Consul key
+    key=$(basename ${config} .json)
+    # Strip out comments, empty lines
+    egrep -v "^#|^$" ${config} > /tmp/dcae-upload
+    curl -v -X PUT -H "Content-Type: application/json" --data-binary @/tmp/dcae-upload ${CONSUL}/v1/kv/${key}
+done
+
+# Put service registrations into the local Consul configuration directory
+for sr in CBS_REG CBS_REG1
+do
+  echo '{"service" : ' ${!sr}  ' }'> /opt/consul/config/${sr}.json
+done
+
+# Start the local consul agent instance
+/opt/consul/bin/consul agent --config-dir /opt/consul/config 2>&1 | tee /opt/consul/consul.log &
+
+# Store the CM password into a Cloudify secret
+cfy secret create -s ${CMPASS} cmpass
+
+# Load plugins onto CM
+for wagon in /wagons/*.wgn
+do
+    install_plugin ${wagon}
+done
+
+# In some oversubscribed cloud environments, we have
+# observed that even though the plugin installations appear
+# to have completed, there are background installation tasks
+# that might still be running.  So we check for running system workflows
+while cm_hasany "executions?is_system_workflow=true&status=pending&status=started&status=queued&status=scheduled"
+do
+    echo "Waiting for running system workflows to complete"
+    sleep 15
+done
+
+# After this point, failures should not stop the script or block later commands
+trap - ERR
+set +e
+
+# Initialize the DCAE postgres instance
+deploy pgaas_initdb k8s-pgaas-initdb.yaml k8s-pgaas-initdb-inputs.yaml
+
+# Deploy service components
+# tca, ves, prh, hv-ves, datafile-collector can be deployed simultaneously
+deploy tca k8s-tca.yaml k8s-tca-inputs.yaml &
+deploy ves k8s-ves.yaml k8s-ves-inputs.yaml &
+deploy prh k8s-prh.yaml k8s-prh-inputs.yaml &
+deploy hv-ves k8s-hv-ves.yaml k8s-hv_ves-inputs.yaml &
+# holmes_rules must be deployed before holmes_engine, but holmes_rules can go in parallel with other service components
+deploy holmes_rules k8s-holmes-rules.yaml k8s-holmes_rules-inputs.yaml
+deploy holmes_engine k8s-holmes-engine.yaml k8s-holmes_engine-inputs.yaml
+
+# Display deployments, for debugging purposes
+cfy deployments list
+
+# Continue running
+keep_running "Finished bootstrap steps."
+echo "Exiting!"