diff options
author | 2017-10-10 14:22:53 +0000 | |
---|---|---|
committer | 2017-10-10 14:36:34 +0000 | |
commit | ab7883e9811b123d34a98fa248f1d7fba2d476c7 (patch) | |
tree | c0e2e411f96779add24faa05a8f68e88ab1a502f /mvn-phase-lib.sh | |
parent | 6d5cbab5f8d4274fd6058bad3666388814f40b6f (diff) |
Use new plugin locations
Issue-Id: DCAEGEN2-128
Change-Id: I62b00d1954a5aa7a37ef0095ffdd473012336989
Signed-off-by: Lusheng Ji <lji@research.att.com>
Diffstat (limited to 'mvn-phase-lib.sh')
-rwxr-xr-x | mvn-phase-lib.sh | 451 |
1 files changed, 451 insertions, 0 deletions
diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh new file mode 100755 index 0000000..a71d316 --- /dev/null +++ b/mvn-phase-lib.sh @@ -0,0 +1,451 @@ +#!/bin/bash + +# ================================================================================ +# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. + + +#MVN_PROJECT_MODULEID="$1" +#MVN_PHASE="$2" +#PROJECT_ROOT=$(dirname $0) + +FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}" +if [ "$MVN_PROJECT_MODULEID" == "__" ]; then + MVN_PROJECT_MODULEID="" +fi + +if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then + echo "=> for SNAPSHOT artifact build" + MVN_DEPLOYMENT_TYPE='SNAPSHOT' +else + echo "=> for STAGING/RELEASE artifact build" + MVN_DEPLOYMENT_TYPE='STAGING' +fi +echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]" + + +TIMESTAMP=$(date +%C%y%m%dT%H%M%S) + +# expected environment variables +if [ -z "${MVN_NEXUSPROXY}" ]; then + echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed" + exit +fi +MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':') +echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY" + +if [ -z "$WORKSPACE" ]; then + WORKSPACE=$(pwd) +fi + +if [ -z "$SETTINGS_FILE" ]; then + echo "SETTINGS_FILE environment variable not set. Cannot proceed" + exit +fi + + + +# mvn phase in life cycle +MVN_PHASE="$2" + +echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]" +echo "MVN_PHASE is [$MVN_PHASE]" +echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]" +echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]" +echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]" +echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]" +echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]" +echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]" +MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':') +echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]" +echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]" +echo "MVN_DOCKERREGISTRY_SNAPSHOT is [$MVN_DOCKERREGISTRY_SNAPSHOT]" +echo "MVN_DOCKERREGISTRY_PUBLIC is [$MVN_DOCKERREGISTRY_PUBLIC]" +echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]" + +echo "MVN_PYPISERVER_SERVERID [$MVN_PYPISERVER_SERVERID]" +echo "MVN_PYPISERVER_BASEURL is [$MVN_PYPISERVER_BASEURL]" + + + +clean_templated_files() +{ + TEMPLATE_FILES=$(find . -name "*-template") + for F in $TEMPLATE_FILES; do + F2=$(echo "$F" | sed 's/-template$//') + rm -f "$F2" + done +} +clean_tox_files() +{ + TOX_FILES=$(find . -name ".tox") + TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')" + for F in $TOX_FILES; do + rm -rf "$F" + done +} + +expand_templates() +{ + # set up env variables, get ready for template resolution + # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs + export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins" + export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins" + export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints" + export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints" + + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots" + + export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}" + + # docker registry templates are for poll, so use PUBLIC registry + export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_PUBLIC" + export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}/snapshots" + + + TEMPLATE_FILES=$(find . -name "*-template") + for F in $TEMPLATE_FILES; do + F2=$(echo "$F" | sed 's/-template$//') + cp "$F" "$F2" + MOD=$(stat --format '%a' "$F") + chmod "$MOD" "$F2" + done + + + TEMPLATES=$(env |grep ONAPTEMPLATE) + if [ -z "$TEMPLATES" ]; then + return 0 + fi + + echo "====> Resolving the following temaplate from environment variables " + echo "[$TEMPLATES]" + SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev) + for TEMPLATE in $TEMPLATES; do + KEY=$(echo "$TEMPLATE" | cut -f1 -d'=') + VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=') + VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g') + set +e + FILES=$(grep -rl "$KEY") + set -e + + if [ -z "$FILES" ]; then + continue + fi + + # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM + for F in $FILES; do + if [[ $F == *"$SELFFILE" ]]; then + continue + fi + if [[ "$F" == *-template ]]; then + continue + fi + + echo "======> Resolving template $KEY to value $VALUE for file $F" + sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F" + #cat "$F" + done + + #if [ ! -z "$FILES" ]; then + # echo "====> Resolving template $VALUE to value $VALUE" + # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\"" + # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g' + # #echo $CMD + # #eval $CMD + #fi + done + echo "====> Done template reolving" +} + +test_templates() +{ + # make certain that the type references exist + TMP=$(mktemp) + trap 'rm -f $TMP' 0 1 2 3 15 + find . -name '*-template' | sed -e 's/-template$//' | + while read file + do + egrep '^ - .?https?://' < $file + done | awk '{print $2}' | sed -e 's/"//g' | sort -u | + while read url + do + curl -L -w '%{http_code}' -s -o /dev/null "$url" > $TMP + case $(< $TMP) in + 2* ) ;; + * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;; + esac + done +} + + +run_tox_test() +{ + set -x + CURDIR=$(pwd) + TOXINIS=$(find . -name "tox.ini") + for TOXINI in "${TOXINIS[@]}"; do + DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev) + cd "${CURDIR}/${DIR}" + rm -rf ./venv-tox ./.tox + virtualenv ./venv-tox + source ./venv-tox/bin/activate + pip install --upgrade pip + pip install --upgrade tox argparse + pip freeze + tox + deactivate + rm -rf ./venv-tox ./.tox + done +} + +build_wagons() +{ + rm -rf ./*.wgn venv-pkg + SETUPFILES=$(find . -name "setup.py") + + virtualenv ./venv-pkg + source ./venv-pkg/bin/activate + pip install --upgrade pip + pip install wagon + + CURDIR=$(pwd) + for SETUPFILE in $SETUPFILES; do + PLUGIN_DIR=$(dirname "$SETUPFILE") + PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g') + PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g') + + echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION" + + wagon create --format tar.gz "${PLUGIN_DIR}" + + PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn ) + echo Built package: "${PKG_FILE_NAMES[@]}" + cd $CURDIR + done + + deactivate + rm -rf venv-pkg +} + + +upload_raw_file() +{ + # Extract the username and password to the nexus repo from the settings file + USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE") + PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE") + NETRC=$(mktemp) + echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC" + + REPO="$MVN_RAWREPO_BASEURL_UPLOAD" + + OUTPUT_FILE=$1 + EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev) + if [ "$EXT" == 'yaml' ]; then + OUTPUT_FILE_TYPE='text/x-yaml' + elif [ "$EXT" == 'sh' ]; then + OUTPUT_FILE_TYPE='text/x-shellscript' + elif [ "$EXT" == 'gz' ]; then + OUTPUT_FILE_TYPE='application/gzip' + elif [ "$EXT" == 'wgn' ]; then + OUTPUT_FILE_TYPE='application/gzip' + else + OUTPUT_FILE_TYPE='application/octet-stream' + fi + + # for multi module projects, the raw repo path must match with project name, not project + module + # FQDN is project + module + # GROUPID is project name + if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then + PROJECT_NAME=${MVN_PROJECT_GROUPID} + else + PROJECT_NAME=${FQDN} + fi + if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then + SEND_TO="${REPO}/${PROJECT_NAME}/snapshots" + elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then + SEND_TO="${REPO}/${PROJECT_NAME}/releases" + else + echo "Unreconfnized deployment type, quit" + exit + fi + #if [ ! -z "$MVN_PROJECT_MODULEID" ]; then + # SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID" + #fi + if [ ! -z "$2" ]; then + SEND_TO="$SEND_TO/$2" + fi + + echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}" + curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}" + curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}" +} + + + +upload_wagons_and_type_yamls() +{ + SETUPFILES=$(find . -name "setup.py") + + CURDIR=$(pwd) + for SETUPFILE in $SETUPFILES; do + PLUGIN_DIR=$(dirname "$SETUPFILE") + PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g') + PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g') + PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.') + PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.') + + echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION" + + TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':') + if [ -z "$TYPEFILE_NAME" ]; then + echo "!!! No typefile found with matching package name $PLUGIN_NAME" + exit -1 + fi + NEWFILENAME="${PLUGIN_NAME}"_types.yaml + if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then + echo "copy typefile to standard naming" + cp -f "$TYPEFILE_NAME" "$NEWFILENAME" + fi + + TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' $TYPEFILE_NAME |cut -f2 -d ':' |sed -r 's/\s+//g') + WAGONFILE_NAME=$(ls -1 $PLUGIN_NAME-$TYPEFILE_PACKAGE_VERSION-*.wgn) + if [ -z "$WAGONFILE_NAME" ]; then + echo "!!! No wagonfile found with matching package name and version as required in typefile: " + echo " $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}" + exit -1 + fi + + upload_raw_file "$NEWFILENAME" type_files/${PLUGIN_NAME}/${PLUGIN_VERSION_MAJOR} + upload_raw_file "$NEWFILENAME" type_files/${PLUGIN_NAME}/${PLUGIN_VERSION_MAJOR_MINOR} + upload_raw_file "${WAGONFILE_NAME}" "plugins/${PLUGIN_NAME}" + + rm -r $WAGONFILE_NAME + if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then + rm -f "$NEWFILENAME" + fi + done +} + +upload_files_of_extension() +{ + FILES=$(ls -1 ./*."$1") + for F in $FILES ; do + upload_raw_file "$F" + done +} + + +generate_pypirc_then_publish() +{ + set +x + USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE") + PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE") + + if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then + MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/" + fi + + + cat > ~/.pypirc <<EOL +[distutils] +index-servers = + $MVN_PYPISERVER_SERVERID + +[$MVN_PYPISERVER_SERVERID] +repository: $MVN_PYPISERVER_BASEURL +username: $USER +password: $PASS +EOL + + # this may fail if a package of same version exists + python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID" + set -x +} + + + +build_and_push_docker() +{ + IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}" + IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g') + IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]') + + # use the major and minor version of the MVN artifact version as docker image version + VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}" + VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.') + + LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}" + # build a docker image + docker build --rm -f ./Dockerfile -t "${LFQI}" ./ + + REPO="" + if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then + REPO=$MVN_DOCKERREGISTRY_SNASHOT + elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then + # there seems to be no staging docker registry? set to use SNAPSHOT also + REPO=$MVN_DOCKERREGISTRY_RELEASE + else + echo "Fail to determine DEPLOYMENT_TYPE" + REPO=$MVN_DOCKERREGISTRY_SNAPSHOT + fi + echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO" + + if [ ! -z "$REPO" ]; then + USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE") + PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE") + if [ -z "$USER" ]; then + echo "Error: no user provided" + fi + if [ -z "$PASS" ]; then + echo "Error: no password provided" + fi + [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>" + echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED" + docker login "$REPO" -u "$USER" -p "$PASS" + + if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then + REPO="$REPO/snapshots" + elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then + # there seems to be no staging docker registry? set to use SNAPSHOT also + #REPO=$MVN_DOCKERREGISTRY_RELEASE + REPO="$REPO" + else + echo "Fail to determine DEPLOYMENT_TYPE" + REPO="$REPO/unknown" + fi + + OLDTAG="${LFQI}" + PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest" + for NEWTAG in ${PUSHTAGS} + do + echo "tagging ${OLDTAG} to ${NEWTAG}" + docker tag "${OLDTAG}" "${NEWTAG}" + echo "pushing ${NEWTAG}" + docker push "${NEWTAG}" + OLDTAG="${NEWTAG}" + done + fi + +} + + + |