Use the mvn-phase-lib under utils

Switch to use the DCAE wide mvn-phase-lib.sh, which is under dcaegen2/utils
instead of having each repo having its own mvn-phase-lib.sh.

Issue-ID: DCAEGEN2-206
Change-Id: I2e95b410074f3e49d78b0f68d7dfb806fb49ba07
Signed-off-by: Lusheng Ji <lji@research.att.com>

2 files changed, 11 insertions, 474 deletions

diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh
deleted file mode 100755
index d855abc..0000000
--- a/mvn-phase-lib.sh
+++ /dev/null
@@ -1,470 +0,0 @@
-#!/bin/bash
-
-# ================================================================================
-# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-
-
-#MVN_PROJECT_MODULEID="$1"
-#MVN_PHASE="$2"
-#PROJECT_ROOT=$(dirname $0)
-
-FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
-if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
-  MVN_PROJECT_MODULEID=""
-fi
-
-if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
-  echo "=> for SNAPSHOT artifact build"
-  MVN_DEPLOYMENT_TYPE='SNAPSHOT'
-else
-  echo "=> for STAGING/RELEASE artifact build"
-  MVN_DEPLOYMENT_TYPE='STAGING'
-fi
-echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
-
-
-TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
-
-# expected environment variables
-if [ -z "${MVN_NEXUSPROXY}" ]; then
-    echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
-    exit
-fi
-MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
-echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
-
-if [ -z "$WORKSPACE" ]; then
-    WORKSPACE=$(pwd)
-fi
-
-if [ -z "$SETTINGS_FILE" ]; then
-    echo "SETTINGS_FILE environment variable not set.  Cannot proceed"
-    exit
-fi
-
-
-
-# mvn phase in life cycle
-MVN_PHASE="$2"
-
-echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
-echo "MVN_PHASE is                       [$MVN_PHASE]"
-echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
-echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
-echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
-echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
-echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
-echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
-MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
-echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
-echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
-echo "MVN_DOCKERREGISTRY_SNAPSHOT is     [$MVN_DOCKERREGISTRY_SNAPSHOT]"
-echo "MVN_DOCKERREGISTRY_PUBLIC is       [$MVN_DOCKERREGISTRY_PUBLIC]"
-echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
-
-echo "MVN_PYPISERVER_SERVERID            [$MVN_PYPISERVER_SERVERID]"
-echo "MVN_PYPISERVER_BASEURL is          [$MVN_PYPISERVER_BASEURL]"
-
-
-
-clean_templated_files() 
-{
-  TEMPLATE_FILES=$(find . -name "*-template")
-  for F in $TEMPLATE_FILES; do
-    F2=$(echo "$F" | sed 's/-template$//')
-    rm -f "$F2"
-  done
-}
-clean_tox_files() 
-{
-  TOX_FILES=$(find . -name ".tox")
-  TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
-  for F in $TOX_FILES; do
-    rm -rf "$F"
-  done
-}
-
-expand_templates() 
-{
-  set +x
-  # set up env variables, get ready for template resolution
-  # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_storage_pgaas_debs_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.storage.pgaas/snapshots"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_storage_pgaas_debs_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.storage.pgaas/releases"
-
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
-
-  export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
-
-  # docker registry templates are for poll, so use PUBLIC registry
-  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_PUBLIC"
-  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}/snapshots"
-
-  # Mvn repo
-  export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_snapshots="${MVN_NEXUSPROXY}/service/local/repositories/snapshots/content/org/onap/dcaegen2/analytics/tca"
-  export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_staging="${MVN_NEXUSPROXY}/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca"
-  export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_releases="${MVN_NEXUSPROXY}/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca"
-
-
-  export ONAPTEMPLATE_STANDARD_INPUTS_TYPES="  # standard inputs list
-  centos7image_id:
-    type: string
-  ubuntu1604image_id:
-    type: string
-  flavor_id:
-    type: string
-  security_group:
-    type: string
-  public_net:
-    type: string
-  private_net:
-    type: string
-  openstack: {}
-  keypair:
-    type: string
-  key_filename:
-    type: string
-  location_prefix:
-    type: string
-  location_domain:
-    type: string
-  codesource_url:
-    type: string
-  codesource_version:
-    type: string"
-
-
-  TEMPLATES=$(env |grep ONAPTEMPLATE | sed 's/=.*//' | sort -u)
-  if [ -z "$TEMPLATES" ]; then
-    echo "No template variables found!"
-    return 0
-  fi
-
-  TEMPLATE_FILES=$(find . -name "*-template")
-  for F in $TEMPLATE_FILES; do
-    F2=$(echo "$F" | sed 's/-template$//')
-    cp -p "$F" "$F2"
-    chmod u+w "$F2"
-   
-    echo "====> Resolving the following template from environment variables "
-    echo "$TEMPLATES"
-    for KEY in $TEMPLATES; do
-      VALUE1=$(eval 'echo "$'"$KEY"'"' | sed 1q)
-      VALUE2=$(eval 'echo "$'"$KEY"'"' | sed -e 's/\//\\\//g' -e 's/$/\\/' -e '$s/\\$//')
-      if [ -z "$VALUE2" ];then echo "WARNING WARNING WARNING: $KEY found with no expansion"; fi
-
-      echo "======> Resolving template $KEY to value $VALUE1 for file $F2"
-      sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F2"
-    done
-  done
-  echo "====> Done template resolving"
-}
-
-test_templates()
-{
-    # make certain that the type references exist
-    TMP=$(mktemp)
-    trap 'rm -f $TMP' 0 1 2 3 15
-
-    echo Verify that all of the import URLs are correct
-    find . -name '*-template' | sed -e 's/-template$//' |
-    while read file
-    do
-        egrep '^  - .?https?://' < $file
-    done  | awk '{print $2}' | sed -e 's/"//g' | sort -u |
-    while read url
-    do
-	curl -L -w '%{http_code}' -s -o /dev/null "$url" > $TMP
-	case $(< $TMP) in
-	    2* ) ;;
-	    * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
-	esac
-    done
-
-    echo Verify that the inputs are correct
-    PATH=$PATH:$PROJECT_ROOT/check-blueprint-vs-input/bin
-    find . -name '*-template' | sed -e 's/-template$//' |
-    while read blueprint
-    do
-	check-blueprint-vs-input -b $blueprint -i $PROJECT_ROOT/check-blueprint-vs-input/lib/sample-inputs.yaml || true
-    done |
-    sed -e 's/^/WARNING WARNING WARNING: /'
-}
-
-
-run_tox_test() 
-{ 
-  set -x
-  CURDIR=$(pwd)
-  TOXINIS=$(find . -name "tox.ini")
-  for TOXINI in "${TOXINIS[@]}"; do
-    DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
-    cd "${CURDIR}/${DIR}"
-    rm -rf ./venv-tox ./.tox
-    virtualenv ./venv-tox
-    source ./venv-tox/bin/activate
-    pip install --upgrade pip
-    pip install --upgrade tox argparse
-    pip freeze
-    tox
-    deactivate
-    rm -rf ./venv-tox ./.tox
-  done
-}
-
-build_wagons() 
-{
-  rm -rf ./*.wgn venv-pkg
-  SETUPFILES=$(find . -name "setup.py")
-  
-  virtualenv ./venv-pkg
-  source ./venv-pkg/bin/activate
-  pip install --upgrade pip 
-  pip install wagon
-  
-  CURDIR=$(pwd)
-  for SETUPFILE in $SETUPFILES; do
-    PLUGIN_DIR=$(dirname "$SETUPFILE")
-    PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
-    PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-
-    echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
-
-    wagon create --format tar.gz "${PLUGIN_DIR}"
-
-    PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
-    echo Built package: "${PKG_FILE_NAMES[@]}"
-    cd $CURDIR
-  done
-
-  deactivate
-  rm -rf venv-pkg
-}
-
-
-upload_raw_file() 
-{
-  # Extract the username and password to the nexus repo from the settings file
-  USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
-  PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
-  NETRC=$(mktemp)
-  echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
-
-  REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
-
-  OUTPUT_FILE=$1
-  EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
-  if [ "$EXT" == 'yaml' ]; then
-    OUTPUT_FILE_TYPE='text/x-yaml'
-  elif [ "$EXT" == 'sh' ]; then
-    OUTPUT_FILE_TYPE='text/x-shellscript'
-  elif [ "$EXT" == 'gz' ]; then
-    OUTPUT_FILE_TYPE='application/gzip'
-  elif [ "$EXT" == 'wgn' ]; then
-    OUTPUT_FILE_TYPE='application/gzip'
-  else
-    OUTPUT_FILE_TYPE='application/octet-stream'
-  fi
-
-  # for multi module projects, the raw repo path must match with project name, not project + module
-  # FQDN is project + module
-  # GROUPID is project name
-  if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
-    PROJECT_NAME=${MVN_PROJECT_GROUPID}
-  else
-    PROJECT_NAME=${FQDN}
-  fi
-  if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
-    SEND_TO="${REPO}/${PROJECT_NAME}/snapshots"
-  elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
-    SEND_TO="${REPO}/${PROJECT_NAME}/releases"
-  else
-    echo "Unreconfnized deployment type, quit"
-    exit
-  fi
-  #if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
-  #  SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
-  #fi
-  if [ ! -z "$2" ]; then
-    SEND_TO="$SEND_TO/$2"
-  fi
-
-  echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
-  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
-  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
-}
-
-
-
-upload_wagons_and_type_yamls()
-{
-  SETUPFILES=$(find . -name "setup.py")
-
-  CURDIR=$(pwd)
-  for SETUPFILE in $SETUPFILES; do
-    PLUGIN_DIR=$(dirname "$SETUPFILE")
-    PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
-    PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-    PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
-    PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
-
-    echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
-
-    TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':')
-    if [ -z "$TYPEFILE_NAME" ]; then
-      echo "!!! No typefile found with matching package name $PLUGIN_NAME"
-      exit -1
-    fi
-    NEWFILENAME="${PLUGIN_NAME}"_types.yaml
-    if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
-      echo "copy typefile to standard naming"
-      cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
-    fi
-
-    TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' $TYPEFILE_NAME |cut -f2 -d ':' |sed -r 's/\s+//g')
-    WAGONFILE_NAME=$(ls -1 $PLUGIN_NAME-$TYPEFILE_PACKAGE_VERSION-*.wgn)
-    if [ -z "$WAGONFILE_NAME" ]; then
-      echo "!!! No wagonfile found with matching package name and version as required in typefile: "
-      echo "    $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
-      exit -1
-    fi
-
-    upload_raw_file "$NEWFILENAME" type_files/${PLUGIN_NAME}/${PLUGIN_VERSION_MAJOR}
-    upload_raw_file "$NEWFILENAME" type_files/${PLUGIN_NAME}/${PLUGIN_VERSION_MAJOR_MINOR}
-    upload_raw_file "${WAGONFILE_NAME}" "plugins/${PLUGIN_NAME}"
-   
-    rm -r $WAGONFILE_NAME
-    if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
-      rm -f "$NEWFILENAME"
-    fi
-  done
-}
-
-upload_files_of_extension()
-{
-  FILES=$(ls -1 ./*."$1")
-  for F in $FILES ; do
-    upload_raw_file "$F" "$2"
-  done
-}
-
-
-generate_pypirc_then_publish() 
-{
-  set +x
-  USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
-  PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
-
-  if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
-    MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
-  fi
- 
-
-  cat > ~/.pypirc <<EOL
-[distutils]
-index-servers = 
-  $MVN_PYPISERVER_SERVERID
- 
-[$MVN_PYPISERVER_SERVERID]
-repository: $MVN_PYPISERVER_BASEURL
-username: $USER
-password: $PASS
-EOL
-
-  # this may fail if a package of same version exists
-  python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
-  set -x
-}
-
-
-
-build_and_push_docker()
-{
-  IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
-  IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
-  IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
-
-  # use the major and minor version of the MVN artifact version as docker image version
-  VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
-  VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
-
-  LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
-  # build a docker image
-  docker build --rm -f ./Dockerfile -t "${LFQI}" ./
-
-  REPO=""
-  if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
-     REPO=$MVN_DOCKERREGISTRY_SNASHOT
-  elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
-     # there seems to be no staging docker registry?  set to use SNAPSHOT also
-     REPO=$MVN_DOCKERREGISTRY_RELEASE
-  else
-     echo "Fail to determine DEPLOYMENT_TYPE"
-     REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
-  fi
-  echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
-
-  if [ ! -z "$REPO" ]; then
-    USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
-    PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
-    if [ -z "$USER" ]; then
-      echo "Error: no user provided"
-    fi
-    if [ -z "$PASS" ]; then
-      echo "Error: no password provided"
-    fi
-    [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
-    echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
-    docker login "$REPO" -u "$USER" -p "$PASS"
-
-    if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
-      REPO="$REPO/snapshots"
-    elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
-      # there seems to be no staging docker registry?  set to use SNAPSHOT also
-      #REPO=$MVN_DOCKERREGISTRY_RELEASE
-      REPO="$REPO"
-    else
-      echo "Fail to determine DEPLOYMENT_TYPE"
-      REPO="$REPO/unknown"
-    fi
-
-    OLDTAG="${LFQI}"
-    PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
-    for NEWTAG in ${PUSHTAGS}
-    do
-      echo "tagging ${OLDTAG} to ${NEWTAG}"
-      docker tag "${OLDTAG}" "${NEWTAG}"
-      echo "pushing ${NEWTAG}"
-      docker push "${NEWTAG}"
-      OLDTAG="${NEWTAG}"
-    done
-  fi
-
-}
-
-
-
diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh
index afbe961..88b19f6 100755
--- a/mvn-phase-script.sh
+++ b/mvn-phase-script.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # ================================================================================
-# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -15,8 +15,6 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
 
 set -ex
 
@@ -69,6 +67,7 @@ fi
 MVN_PHASE="$2"
 
 
+echo "MVN_RELEASE_TAG is                 [$MVN_RELEASE_TAG]"
 echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
 echo "MVN_PHASE is                       [$MVN_PHASE]"
 echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
@@ -86,7 +85,15 @@ echo "MVN_DOCKERREGISTRY_PUBLIC is       [$MVN_DOCKERREGISTRY_PUBLIC]"
 echo "HOME is                            [$HOME]"
 echo "PROJECT_ROOT is                    [$PROJECT_ROOT]"
 
-source "${PROJECT_ROOT}"/mvn-phase-lib.sh 
+MVN_RELEASE_TAG="${MVN_RELEASE_TAG:-R2}"
+
+
+if ! wget -O ${PROJECT_ROOT}/mvn-phase-lib.sh \
+  "$MVN_RAWREPO_BASEURL_DOWNLOAD"/org.onap.dcaegen2.utils/${MVN_RELEASE_TAG}/scripts/mvn-phase-lib.sh; then
+  echo "Fail to download mvn-phase-lib.sh"
+  exit 1
+fi
+source "${PROJECT_ROOT}"/mvn-phase-lib.sh
 
 
 # Customize the section below for each project