summaryrefslogtreecommitdiffstats
path: root/docs/sections
diff options
context:
space:
mode:
Diffstat (limited to 'docs/sections')
-rw-r--r--docs/sections/services/ves-http/installation.rst239
-rw-r--r--docs/sections/services/ves-hv/installation.rst4
2 files changed, 159 insertions, 84 deletions
diff --git a/docs/sections/services/ves-http/installation.rst b/docs/sections/services/ves-http/installation.rst
index e31348cf..156427af 100644
--- a/docs/sections/services/ves-http/installation.rst
+++ b/docs/sections/services/ves-http/installation.rst
@@ -1,82 +1,157 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. _ves-installation:
-
-
-Installation
-============
-
-VESCollector is installed via cloudify blueprint by DCAE bootstrap process on typical ONAP installation.
-As the service is containerized, it can be started on stand-alone mode also.
-
-
-To run VES Collector container on standalone mode, following parameters are required
-
- ``docker run -d -p 8080:8080/tcp -p 8443:8443/tcp -P -e DMAAPHOST='10.0.11.1' nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.7.9``
-
-
-DMAAPHOST is required for standalone; for normal platform installed instance the publish URL are obtained from Consul. Below parameters are exposed for DCAE platform (cloudify) deployed instance
-
-
-- COLLECTOR_IP
-- DMAAPHOST - should contain an address to DMaaP, so that event publishing can work
-- CONFIG_BINDING_SERVICE - should be a name of CBS
-- CONFIG_BINDING_SERVICE_SERVICE_PORT - should be a http port of CBS
-- HOSTNAME - should be a name of VESCollector application as it is registered in CBS catalog
-
-These parameters can be configured either by passing command line option during `docker run` call or by specifying environment variables named after command line option name
-
-
-Authentication Support
-----------------------
-
-VES Collector support following authentication types
-
- * *auth.method=noAuth* default option - no security (http)
- * *auth.method=certBasicAuth* is used to enable mutual TLS authentication or/and basic HTTPs authentication
-
-The blueprint is same for both deployments - based on the input configuration, VESCollector can be set for required authentication type.
-Default ONAP deployed VESCollector is configured for "certBasicAuth".
-
-If VESCollector instance need to be deployed with authentication disabled, follow below setup
-
-
-- Execute into Bootstrap POD using kubectl command
- .. note::
- For doing this, follow the below steps
-
- * First get the bootstrap pod name by running run this: kubectl get pods -n onap | grep bootstrap
- * Then login to bootstrap pod by running this: kubectl exec -it <bootstrap pod> bash -n onap
-
-- VES blueprint is available under /blueprints directory ``k8s-ves.yaml``. A corresponding input file is also pre-loaded into bootstrap pod under /inputs/k8s-ves-inputs.yaml
-
-- Deploy blueprint
- .. code-block:: bash
-
- cfy install -b ves-http -d ves-http -i /inputs/k8s-ves-inputs.yaml /blueprints/k8s-ves.yaml
-
-To undeploy ves-http, steps are noted below
-
-- Uninstall running ves-http and delete deployment
- .. code-block:: bash
-
- cfy uninstall ves-http
-
-The deployment uninstall will also delete the blueprint. In some case you might notice 400 error reported indicating active deployment exist such as below
-** An error occurred on the server: 400: Can't delete blueprint ves-http - There exist deployments for this blueprint; Deployments ids: ves-http**
-
-In this case blueprint can be deleted explicitly using this command.
-
- .. code-block:: bash
-
- cfy blueprint delete ves-http
-
-Using external TLS certificates obtained using CMP v2 protocol
---------------------------------------------------------------
-
-In order to use the X.509 certificates obtained from the CMP v2 server (so called "operator`s certificates"), refer to the following description:
-
-.. toctree::
- :maxdepth: 1
-
- Enabling TLS with external x.509 certificates <../../tls_enablement>
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. _ves-installation:
+
+
+VES Collector Cloudify Installation
+===================================
+
+VESCollector is installed via cloudify blueprint by DCAE bootstrap process on typical ONAP installation.
+As the service is containerized, it can be started on stand-alone mode also.
+
+
+To run VES Collector container on standalone mode, following parameters are required
+
+ ``docker run -d -p 8080:8080/tcp -p 8443:8443/tcp -P -e DMAAPHOST='10.0.11.1' nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.7.9``
+
+
+DMAAPHOST is required for standalone; for normal platform installed instance the publish URL are obtained from Consul. Below parameters are exposed for DCAE platform (cloudify) deployed instance
+
+
+- COLLECTOR_IP
+- DMAAPHOST - should contain an address to DMaaP, so that event publishing can work
+- CONFIG_BINDING_SERVICE - should be a name of CBS
+- CONFIG_BINDING_SERVICE_SERVICE_PORT - should be a http port of CBS
+- HOSTNAME - should be a name of VESCollector application as it is registered in CBS catalog
+
+These parameters can be configured either by passing command line option during `docker run` call or by specifying environment variables named after command line option name
+
+
+Authentication Support
+----------------------
+
+VES Collector support following authentication types
+
+ * *auth.method=noAuth* default option - no security (http)
+ * *auth.method=certBasicAuth* is used to enable mutual TLS authentication or/and basic HTTPs authentication
+
+The blueprint is same for both deployments - based on the input configuration, VESCollector can be set for required authentication type.
+Default ONAP deployed VESCollector is configured for "certBasicAuth".
+
+If VESCollector instance need to be deployed with authentication disabled, follow below setup
+
+
+- Execute into Bootstrap POD using kubectl command
+ .. note::
+ For doing this, follow the below steps
+
+ * First get the bootstrap pod name by running this: kubectl get pods -n onap | grep bootstrap
+ * Then login to bootstrap pod by running this: kubectl exec -it <bootstrap pod> -n onap -- bash
+
+- VES blueprint is available under /blueprints directory ``k8s-ves.yaml``. A corresponding input file is also pre-loaded into bootstrap pod under /inputs/k8s-ves-inputs.yaml
+
+- Deploy blueprint
+ .. code-block:: bash
+
+ cfy install -b ves-http -d ves-http -i /inputs/k8s-ves-inputs.yaml /blueprints/k8s-ves.yaml
+
+To undeploy ves-http, steps are noted below
+
+- Uninstall running ves-http and delete deployment
+ .. code-block:: bash
+
+ cfy uninstall ves-http
+
+The deployment uninstall will also delete the blueprint. In some case you might notice 400 error reported indicating active deployment exist such as below
+** An error occurred on the server: 400: Can't delete blueprint ves-http - There exist deployments for this blueprint; Deployments ids: ves-http**
+
+In this case blueprint can be deleted explicitly using this command.
+
+ .. code-block:: bash
+
+ cfy blueprint delete ves-http
+
+External repo schema files from OOM connection to VES collector
+-------------------------------------------------------------------
+In order to not use schema files bundled in VES Collector image but schema files defined in `OOM <https://gerrit.onap.org/r/gitweb?p=oom.git;a=tree;f=kubernetes/dcaegen2/resources/external>`_ repository and installed with dcaegen2 module, follow below setup.
+
+- Execute into Bootstrap POD using kubectl command
+ .. note::
+ For doing this, follow the below steps
+
+ * First get the bootstrap pod name by running this: kubectl get pods -n onap | grep bootstrap
+ * Then login to bootstrap pod by running this: kubectl exec -it <bootstrap pod> -n onap -- bash
+
+- VES blueprint is available under /blueprints directory ``k8s-ves.yaml``. A corresponding input file is also pre-loaded into bootstrap pod under /inputs/k8s-ves-inputs.yaml
+
+- Edit ``k8s-ves.yaml`` blueprint by adding section below ``docker_config:`` tag:
+ .. code-block:: bash
+
+ volumes:
+ - container:
+ bind: /opt/app/VESCollector/etc/externalRepo/3gpp/rep/sa5/MnS/blob/SA88-Rel16/OpenAPI
+ config_volume:
+ name: dcae-external-repo-configmap-sa88-rel16
+ - container:
+ bind: /opt/app/VESCollector/etc/externalRepo/
+ config_volume:
+ name: dcae-external-repo-configmap-schema-map
+
+- After all ``docker_config:`` section in blueprint should looks like:
+ .. code-block:: bash
+
+ docker_config:
+ healthcheck:
+ endpoint: /healthcheck
+ interval: 15s
+ timeout: 1s
+ type: http
+ volumes:
+ - container:
+ bind: /opt/app/VESCollector/etc/externalRepo/3gpp/rep/sa5/MnS/blob/SA88-Rel16/OpenAPI
+ config_volume:
+ name: dcae-external-repo-configmap-sa88-rel16
+ - container:
+ bind: /opt/app/VESCollector/etc/externalRepo/
+ config_volume:
+ name: dcae-external-repo-configmap-schema-map
+
+.. note::
+
+ To undeploy ves-http if it is deployed, steps are noted below
+
+ Uninstall running ves-http and delete deployment
+ .. code-block:: bash
+
+ cfy uninstall ves-http
+
+ The deployment uninstall will also delete the blueprint. In some case you might notice 400 error reported indicating active deployment exist such as below
+ ** An error occurred on the server: 400: Can't delete blueprint ves-http - There exist deployments for this blueprint; Deployments ids: ves-http**
+
+ In this case blueprint can be deleted explicitly using this command.
+
+ .. code-block:: bash
+
+ cfy blueprint delete ves-http
+
+To deploy modified ves-http, steps are noted below
+
+- Load blueprint:
+ .. code-block:: bash
+
+ cfy blueprints upload -b ves-http /blueprints/k8s-ves.yaml
+
+- Deploy blueprint
+ .. code-block:: bash
+
+ cfy install -b ves-http -d ves-http -i /inputs/k8s-ves-inputs.yaml /blueprints/k8s-ves.yaml
+
+Using external TLS certificates obtained using CMP v2 protocol
+--------------------------------------------------------------
+
+In order to use the X.509 certificates obtained from the CMP v2 server (so called "operator`s certificates"), refer to the following description:
+
+.. toctree::
+ :maxdepth: 1
+
+ Enabling TLS with external x.509 certificates <../../tls_enablement>
diff --git a/docs/sections/services/ves-hv/installation.rst b/docs/sections/services/ves-hv/installation.rst
index d97db068..ada7b7f0 100644
--- a/docs/sections/services/ves-hv/installation.rst
+++ b/docs/sections/services/ves-hv/installation.rst
@@ -3,8 +3,8 @@
.. _installation:
-HV-VES installation
-===================
+HV-VES Cloudify Installation
+============================
Starting from ONAP/Honolulu release, HV-VES is installed with a DCAEGEN2-Services Helm charts.
This installation mechanism is convenient, but it doesn`t support all HV-VES features (e.g. CMP v2 certificates, and IPv4/IPv6 dual stack networking). This description demonstrates, how to deploy HV-VES collector using Cloudify orchestrator.