diff options
Diffstat (limited to 'docs/sections')
| -rw-r--r-- | docs/sections/offeredapis.rst | 93 |
1 files changed, 15 insertions, 78 deletions
diff --git a/docs/sections/offeredapis.rst b/docs/sections/offeredapis.rst index 33a2c821..98cd41a0 100644 --- a/docs/sections/offeredapis.rst +++ b/docs/sections/offeredapis.rst @@ -1,83 +1,20 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 .. _offeredapis: Offered APIs ============ -**trapd** supports the Simple Network Management Protocol (SNMP) -standard. It is a well documented and pervasive protocol, -used in all networks worldwide. - -As an API offering, the only way to interact with **trapd** is -to send traps that conform to the industry standard specification -(RFC1215 - available at https://tools.ietf.org/html/rfc1215 ) to a -running instance. To accomplish this, you may: - -1. Configure SNMP agents to send native traps to a SNMPTRAP instance. - In SNMP agent configurations, this is usually accomplished by - setting the "trap target" or "snmp manager" to the IP address - of the running VM/container hosting SNMPTRAP. - -2. Simulate a SNMP trap using various freely available utilities. Two - examples are provided below, *be sure to change the target - ("localhost") and port ("162") to applicable values in your - environment.* - -NetSNMP snmptrap ----------------- - -One way to simulate an arriving SNMP trap is to use the Net-SNMP utility/command snmptrap. -This command can send V1, V2c or V3 traps to a manager based on the parameters provided. - -The example below sends a SNMP V1 trap to the specified host. Prior to running this command, export -the values of *to_ip_address* (set it to the IP of the VM hosting the ONAP trapd container) and *to_port* (typically -set to "162"): - - ``export to_ip_address=192.168.1.1`` - - ``export to_port=162`` - -Then run the Net-SNMP command/utility: - - ``snmptrap -d -v 1 -c not_public ${to_ip_address}:${to_portt} .1.3.6.1.4.1.99999 localhost 6 1 '55' .1.11.12.13.14.15 s "test trap"`` - -.. note:: - - This will display some "read_config_store open failure" errors; - they can be ignored, the trap has successfully been sent to the - specified destination. - -python using pysnmp -------------------- - -Another way to simulate an arriving SNMP trap is to send one with the python *pysnmp* module. (Note that this -is the same module that ONAP trapd is based on). - -To do this, create a python script called "send_trap.py" with the following contents. You'll need to change the -target (from "localhost" to whatever the destination IP/hostname of the trap receiver is) before saving: - -.. code-block:: python - - from pysnmp.hlapi import * - from pysnmp import debug - - # debug.setLogger(debug.Debug('msgproc')) - - errorIndication, errorStatus, errorIndex, varbinds = next(sendNotification(SnmpEngine(), - CommunityData('not_public'), - UdpTransportTarget(('localhost', 162)), - ContextData(), - 'trap', - [ObjectType(ObjectIdentity('.1.3.6.1.4.1.999.1'), OctetString('test trap - ignore')), - ObjectType(ObjectIdentity('.1.3.6.1.4.1.999.2'), OctetString('ONAP pytest trap'))]) - ) - - if errorIndication: - print(errorIndication) - else: - print("successfully sent trap") - -To run the pysnmp example: - - ``python ./send_trap.py`` +.. toctree:: + :maxdepth: 1 + :titlesonly: + + apis/configbinding.rst + apis/deployment-handler.rst + apis/inventory.rst + apis/ves.rst + apis/ves-hv/index.rst + apis/PRH.rst + apis/DFC.rst + apis/PNDA.rst + apis/pmmapper.rst + apis/SDK.rst + apis/mod-onboardingapi.rst |