summaryrefslogtreecommitdiffstats
path: root/mvn-phase-script.sh
diff options
context:
space:
mode:
Diffstat (limited to 'mvn-phase-script.sh')
-rwxr-xr-xmvn-phase-script.sh372
1 files changed, 334 insertions, 38 deletions
diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh
index 45e62fc..567850d 100755
--- a/mvn-phase-script.sh
+++ b/mvn-phase-script.sh
@@ -1,92 +1,388 @@
#!/bin/bash
-# ============LICENSE_START====================================================
-# org.onap.dcae
-# =============================================================================
+
+# ================================================================================
# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
-# =============================================================================
+# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
-# http://www.apache.org/licenses/LICENSE-2.0
+# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
-# ============LICENSE_END======================================================
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+set -ex
+
echo "running script: [$0] for module [$1] at stage [$2]"
-echo "=> Prepare environment "
+MVN_PROJECT_MODULEID="$1"
+MVN_PHASE="$2"
+
+
+FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
+if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
+ MVN_PROJECT_MODULEID=""
+fi
+
+if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
+ echo "=> for SNAPSHOT artifact build"
+ MVN_DEPLOYMENT_TYPE='SNAPSHOT'
+else
+ echo "=> for STAGING/RELEASE artifact build"
+ MVN_DEPLOYMENT_TYPE='STAGING'
+fi
+echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]"
-# This is the base for where "deploy" will upload
-# MVN_NEXUSPROXY is set in the pom.xml
-REPO=$MVN_NEXUSPROXY/content/sites/raw
TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
-export BUILD_NUMBER="${TIMESTAMP}"
# expected environment variables
if [ -z "${MVN_NEXUSPROXY}" ]; then
echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed"
exit
fi
-MVN_NEXUSPROXY_HOST=$(echo $MVN_NEXUSPROXY |cut -f3 -d'/' | cut -f1 -d':')
+MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
+echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
+if [ -z "$WORKSPACE" ]; then
+ WORKSPACE=$(pwd)
+fi
+
+if [ -z "$SETTINGS_FILE" ]; then
+ echo "SETTINGS_FILE environment variable not set. Cannot proceed"
+ exit
+fi
+
-# use the version text detect which phase we are in in LF CICD process: verify, merge, or (daily) release
# mvn phase in life cycle
MVN_PHASE="$2"
+
+echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]"
+echo "MVN_PHASE is [$MVN_PHASE]"
+echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]"
+echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]"
+echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]"
+echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]"
+echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]"
+echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
+MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
+echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]"
+echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]"
+echo "MVN_DOCKERREGISTRY_DAILY is [$MVN_DOCKERREGISTRY_DAILY]"
+echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]"
+
+clean_templated_files()
+{
+ TEMPLATE_FILES=$(find . -name "*-template")
+ for F in $TEMPLATE_FILES; do
+ F2=$(echo "$F" | sed 's/-template$//')
+ rm -f "$F2"
+ done
+}
+
+
+expand_templates()
+{
+ # set up env variables, get ready for template resolution
+ # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
+
+ export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_NEXUSPROXY}/content/sites/pypi"
+
+ export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY"
+ export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots"
+
+
+ TEMPLATE_FILES=$(find . -name "*-template")
+ for F in $TEMPLATE_FILES; do
+ F2=$(echo "$F" | sed 's/-template$//')
+ cp "$F" "$F2"
+ MOD=$(stat --format '%a' "$F")
+ chmod "$MOD" "$F2"
+ done
+
+
+ TEMPLATES=$(env |grep ONAPTEMPLATE)
+ if [ -z "$TEMPLATES" ]; then
+ return 0
+ fi
+
+ echo "====> Resolving the following temaplate from environment variables "
+ echo "[$TEMPLATES]"
+ SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
+ for TEMPLATE in $TEMPLATES; do
+ KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
+ VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
+ VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
+ FILES=$(grep -rlv "$KEY")
+
+ if [ -z "$FILES" ]; then
+ continue
+ fi
+
+ # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
+ for F in $FILES; do
+ if [[ $F == *"$SELFFILE" ]]; then
+ continue
+ fi
+ if [[ "$F" == *-template ]]; then
+ continue
+ fi
+
+ echo "======> Resolving template $KEY to value $VALUE for file $F"
+ sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
+ #cat "$F"
+ done
+
+ #if [ ! -z "$FILES" ]; then
+ # echo "====> Resolving template $VALUE to value $VALUE"
+ # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
+ # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
+ # #echo $CMD
+ # #eval $CMD
+ #fi
+ done
+ echo "====> Done template reolving"
+}
+
+
+run_tox_test()
+{
+ set -x
+ CURDIR=$(pwd)
+ TOXINIS=$(find . -name "tox.ini")
+ for TOXINI in "${TOXINIS[@]}"; do
+ DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
+ cd "${CURDIR}/${DIR}"
+ rm -rf ./venv-tox ./.tox
+ virtualenv ./venv-tox
+ source ./venv-tox/bin/activate
+ pip install --upgrade pip
+ pip install --upgrade tox argparse
+ pip freeze
+ tox
+ deactivate
+ rm -rf ./venv-tox ./.tox
+ done
+}
+
+build_wagons()
+{
+ rm -rf ./*.wgn venv-pkg
+
+ SETUPFILES=$(find . -name "setup.py")
+ for SETUPFILE in $SETUPFILES; do
+ PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev)
+ PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+ PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+
+ echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION"
+
+ virtualenv ./venv-pkg
+ source ./venv-pkg/bin/activate
+ pip install --upgrade pip
+ pip install wagon
+ wagon create --format tar.gz "$PLUGIN_DIR"
+ deactivate
+ rm -rf venv-pkg
+
+ PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
+ echo Built package: "${PKG_FILE_NAMES[@]}"
+ done
+}
+
+
+upload_raw_file()
+{
+ # Extract the username and password to the nexus repo from the settings file
+ USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
+ NETRC=$(mktemp)
+ echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
+
+ REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
+
+ OUTPUT_FILE=$1
+ EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
+ if [ "$EXT" == 'yaml' ]; then
+ OUTPUT_FILE_TYPE='text/x-yaml'
+ elif [ "$EXT" == 'sh' ]; then
+ OUTPUT_FILE_TYPE='text/x-shellscript'
+ elif [ "$EXT" == 'gz' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ elif [ "$EXT" == 'wgn' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ else
+ OUTPUT_FILE_TYPE='application/octet-stream'
+ fi
+
+
+ if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
+ SEND_TO="${REPO}/${FQDN}/snapshots"
+ elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
+ SEND_TO="${REPO}/${FQDN}/releases"
+ else
+ echo "Unreconfnized deployment type, quit"
+ exit
+ fi
+ if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
+ SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
+ fi
+
+ echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
+}
+
+
+
+upload_wagons_and_type_yamls()
+{
+ WAGONS=$(ls -1 ./*.wgn)
+ for WAGON in $WAGONS ; do
+ WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-')
+ WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-')
+ WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1)
+
+ upload_raw_file "$WAGON"
+ upload_raw_file "$WAGON_TYPEFILE"
+ done
+}
+
+upload_files_of_extension()
+{
+ FILES=$(ls -1 ./*."$1")
+ for F in $FILES ; do
+ upload_raw_file "$F"
+ done
+}
+
+
+
+build_and_push_docker()
+{
+ IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
+ IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
+
+ # use the major and minor version of the MVN artifact version as docker image version
+ VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
+ VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
+
+ LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
+ BUILD_PATH="${WORKSPACE}"
+ # build a docker image
+ docker build --rm -f "${WORKSPACE}"/Dockerfile -t "${LFQI}" "${BUILD_PATH}"
+
+ REPO=""
+ if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+ REPO=$MVN_DOCKERREGISTRY_DAILY
+ elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+ # there seems to be no staging docker registry? set to use SNAPSHOT also
+ #REPO=$MVN_DOCKERREGISTRY_RELEASE
+ REPO=$MVN_DOCKERREGISTRY_DAILY
+ else
+ echo "Fail to determine DEPLOYMENT_TYPE"
+ REPO=$MVN_DOCKERREGISTRY_DAILY
+ fi
+ echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
+
+ if [ ! -z "$REPO" ]; then
+ USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
+ if [ -z "$USER" ]; then
+ echo "Error: no user provided"
+ fi
+ if [ -z "$PASS" ]; then
+ echo "Error: no password provided"
+ fi
+ [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
+ echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
+ docker login "$REPO" -u "$USER" -p "$PASS"
+
+ if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+ REPO="$REPO/snapshots"
+ elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+ # there seems to be no staging docker registry? set to use SNAPSHOT also
+ #REPO=$MVN_DOCKERREGISTRY_RELEASE
+ REPO="$REPO"
+ else
+ echo "Fail to determine DEPLOYMENT_TYPE"
+ REPO="$REPO/unknown"
+ fi
+
+ OLDTAG="${LFQI}"
+ PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
+ for NEWTAG in ${PUSHTAGS}
+ do
+ echo "tagging ${OLDTAG} to ${NEWTAG}"
+ docker tag "${OLDTAG}" "${NEWTAG}"
+ echo "pushing ${NEWTAG}"
+ docker push "${NEWTAG}"
+ OLDTAG="${NEWTAG}"
+ done
+ fi
+
+}
+
+
+
+# Customize the section below for each project
case $MVN_PHASE in
clean)
echo "==> clean phase script"
- # Nothing to do
+ clean_templated_files
+ rm -rf ./venv-* ./*.wgn
;;
generate-sources)
echo "==> generate-sources phase script"
- # Nothing to do
+ expand_templates
;;
compile)
echo "==> compile phase script"
- # Nothing to do
;;
test)
echo "==> test phase script"
- # Nothing to do
;;
package)
echo "==> package phase script"
- # Nothing to do
;;
install)
echo "==> install phase script"
- # Nothing to do
;;
deploy)
echo "==> deploy phase script"
- # Just upload files to Nexus
- set -e -x
- function setnetrc {
- # Turn off -x so won't leak the credentials
- set +x
- hostport=$(echo $1 | cut -f3 -d /)
- host=$(echo $hostport | cut -f1 -d:)
- settings=$HOME/.m2/settings.xml
- ( echo machine $host; echo login $(xpath $settings "//servers/server[id='$MVN_SERVER_ID']/username/text()"); echo password $(xpath $settings "//servers/server[id='$MVN_SERVER_ID']/password/text()") ) >$HOME/.netrc
- chmod 600 $HOME/.netrc
- set -x
- }
- function putraw {
- curl -X PUT -H "Content-Type: text/plain" --netrc --upload-file $1 --url $REPO/$2
- }
- setnetrc $REPO
- putraw scripts/instconsulagentub16.sh cloud_init/instconsulagentub16.sh
- putraw scripts/cdap-init.sh cloud_init/cdap-init.sh
- set +e +x
+ case $MVN_PROJECT_MODULEID in
+ bootstrap)
+ build_and_push_docker
+ ;;
+ scripts)
+ upload_files_of_extension sh
+ ;;
+ *)
+ echo "====> unknown mvn project module"
+ ;;
+ esac
;;
*)
echo "==> unprocessed phase"