diff options
author | Lusheng Ji <lji@research.att.com> | 2017-09-11 20:11:29 +0000 |
---|---|---|
committer | Lusheng Ji <lji@research.att.com> | 2017-09-11 20:11:44 +0000 |
commit | c38ca2f40aa0eee42fb7b2c61be4ba6e4f9aa56a (patch) | |
tree | 09d8462e1a8838b9fd575e5f9b6fcbb6af94c8e1 /mvn-phase-script.sh | |
parent | 55f488022631ce6ab14b440e747b2e9d7648b49c (diff) |
Add bootstrap
Issue-Id: DCAEGEN2-75
Change-Id: I0158762c1c3e29612381734a608fa821e903e92e
Signed-off-by: Lusheng Ji <lji@research.att.com>
Diffstat (limited to 'mvn-phase-script.sh')
-rwxr-xr-x | mvn-phase-script.sh | 372 |
1 files changed, 334 insertions, 38 deletions
diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh index 45e62fc..567850d 100755 --- a/mvn-phase-script.sh +++ b/mvn-phase-script.sh @@ -1,92 +1,388 @@ #!/bin/bash -# ============LICENSE_START==================================================== -# org.onap.dcae -# ============================================================================= + +# ================================================================================ # Copyright (c) 2017 AT&T Intellectual Property. All rights reserved. -# ============================================================================= +# ================================================================================ # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # -# http://www.apache.org/licenses/LICENSE-2.0 +# http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. -# ============LICENSE_END====================================================== +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. + +set -ex + echo "running script: [$0] for module [$1] at stage [$2]" -echo "=> Prepare environment " +MVN_PROJECT_MODULEID="$1" +MVN_PHASE="$2" + + +FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}" +if [ "$MVN_PROJECT_MODULEID" == "__" ]; then + MVN_PROJECT_MODULEID="" +fi + +if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then + echo "=> for SNAPSHOT artifact build" + MVN_DEPLOYMENT_TYPE='SNAPSHOT' +else + echo "=> for STAGING/RELEASE artifact build" + MVN_DEPLOYMENT_TYPE='STAGING' +fi +echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]" -# This is the base for where "deploy" will upload -# MVN_NEXUSPROXY is set in the pom.xml -REPO=$MVN_NEXUSPROXY/content/sites/raw TIMESTAMP=$(date +%C%y%m%dT%H%M%S) -export BUILD_NUMBER="${TIMESTAMP}" # expected environment variables if [ -z "${MVN_NEXUSPROXY}" ]; then echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed" exit fi -MVN_NEXUSPROXY_HOST=$(echo $MVN_NEXUSPROXY |cut -f3 -d'/' | cut -f1 -d':') +MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':') +echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY" +if [ -z "$WORKSPACE" ]; then + WORKSPACE=$(pwd) +fi + +if [ -z "$SETTINGS_FILE" ]; then + echo "SETTINGS_FILE environment variable not set. Cannot proceed" + exit +fi + -# use the version text detect which phase we are in in LF CICD process: verify, merge, or (daily) release # mvn phase in life cycle MVN_PHASE="$2" + +echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]" +echo "MVN_PHASE is [$MVN_PHASE]" +echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]" +echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]" +echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]" +echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]" +echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]" +echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]" +MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':') +echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]" +echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]" +echo "MVN_DOCKERREGISTRY_DAILY is [$MVN_DOCKERREGISTRY_DAILY]" +echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]" + +clean_templated_files() +{ + TEMPLATE_FILES=$(find . -name "*-template") + for F in $TEMPLATE_FILES; do + F2=$(echo "$F" | sed 's/-template$//') + rm -f "$F2" + done +} + + +expand_templates() +{ + # set up env variables, get ready for template resolution + # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs + export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins" + export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins" + export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints" + export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints" + + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases" + export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots" + + export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_NEXUSPROXY}/content/sites/pypi" + + export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY" + export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots" + + + TEMPLATE_FILES=$(find . -name "*-template") + for F in $TEMPLATE_FILES; do + F2=$(echo "$F" | sed 's/-template$//') + cp "$F" "$F2" + MOD=$(stat --format '%a' "$F") + chmod "$MOD" "$F2" + done + + + TEMPLATES=$(env |grep ONAPTEMPLATE) + if [ -z "$TEMPLATES" ]; then + return 0 + fi + + echo "====> Resolving the following temaplate from environment variables " + echo "[$TEMPLATES]" + SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev) + for TEMPLATE in $TEMPLATES; do + KEY=$(echo "$TEMPLATE" | cut -f1 -d'=') + VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=') + VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g') + FILES=$(grep -rlv "$KEY") + + if [ -z "$FILES" ]; then + continue + fi + + # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM + for F in $FILES; do + if [[ $F == *"$SELFFILE" ]]; then + continue + fi + if [[ "$F" == *-template ]]; then + continue + fi + + echo "======> Resolving template $KEY to value $VALUE for file $F" + sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F" + #cat "$F" + done + + #if [ ! -z "$FILES" ]; then + # echo "====> Resolving template $VALUE to value $VALUE" + # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\"" + # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g' + # #echo $CMD + # #eval $CMD + #fi + done + echo "====> Done template reolving" +} + + +run_tox_test() +{ + set -x + CURDIR=$(pwd) + TOXINIS=$(find . -name "tox.ini") + for TOXINI in "${TOXINIS[@]}"; do + DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev) + cd "${CURDIR}/${DIR}" + rm -rf ./venv-tox ./.tox + virtualenv ./venv-tox + source ./venv-tox/bin/activate + pip install --upgrade pip + pip install --upgrade tox argparse + pip freeze + tox + deactivate + rm -rf ./venv-tox ./.tox + done +} + +build_wagons() +{ + rm -rf ./*.wgn venv-pkg + + SETUPFILES=$(find . -name "setup.py") + for SETUPFILE in $SETUPFILES; do + PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev) + PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g') + PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g') + + echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION" + + virtualenv ./venv-pkg + source ./venv-pkg/bin/activate + pip install --upgrade pip + pip install wagon + wagon create --format tar.gz "$PLUGIN_DIR" + deactivate + rm -rf venv-pkg + + PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn ) + echo Built package: "${PKG_FILE_NAMES[@]}" + done +} + + +upload_raw_file() +{ + # Extract the username and password to the nexus repo from the settings file + USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE") + PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE") + NETRC=$(mktemp) + echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC" + + REPO="$MVN_RAWREPO_BASEURL_UPLOAD" + + OUTPUT_FILE=$1 + EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev) + if [ "$EXT" == 'yaml' ]; then + OUTPUT_FILE_TYPE='text/x-yaml' + elif [ "$EXT" == 'sh' ]; then + OUTPUT_FILE_TYPE='text/x-shellscript' + elif [ "$EXT" == 'gz' ]; then + OUTPUT_FILE_TYPE='application/gzip' + elif [ "$EXT" == 'wgn' ]; then + OUTPUT_FILE_TYPE='application/gzip' + else + OUTPUT_FILE_TYPE='application/octet-stream' + fi + + + if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then + SEND_TO="${REPO}/${FQDN}/snapshots" + elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then + SEND_TO="${REPO}/${FQDN}/releases" + else + echo "Unreconfnized deployment type, quit" + exit + fi + if [ ! -z "$MVN_PROJECT_MODULEID" ]; then + SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID" + fi + + echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}" + curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}" + curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}" + curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}" +} + + + +upload_wagons_and_type_yamls() +{ + WAGONS=$(ls -1 ./*.wgn) + for WAGON in $WAGONS ; do + WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-') + WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-') + WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1) + + upload_raw_file "$WAGON" + upload_raw_file "$WAGON_TYPEFILE" + done +} + +upload_files_of_extension() +{ + FILES=$(ls -1 ./*."$1") + for F in $FILES ; do + upload_raw_file "$F" + done +} + + + +build_and_push_docker() +{ + IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}" + IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g') + + # use the major and minor version of the MVN artifact version as docker image version + VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}" + VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.') + + LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}" + BUILD_PATH="${WORKSPACE}" + # build a docker image + docker build --rm -f "${WORKSPACE}"/Dockerfile -t "${LFQI}" "${BUILD_PATH}" + + REPO="" + if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then + REPO=$MVN_DOCKERREGISTRY_DAILY + elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then + # there seems to be no staging docker registry? set to use SNAPSHOT also + #REPO=$MVN_DOCKERREGISTRY_RELEASE + REPO=$MVN_DOCKERREGISTRY_DAILY + else + echo "Fail to determine DEPLOYMENT_TYPE" + REPO=$MVN_DOCKERREGISTRY_DAILY + fi + echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO" + + if [ ! -z "$REPO" ]; then + USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE") + PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE") + if [ -z "$USER" ]; then + echo "Error: no user provided" + fi + if [ -z "$PASS" ]; then + echo "Error: no password provided" + fi + [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>" + echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED" + docker login "$REPO" -u "$USER" -p "$PASS" + + if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then + REPO="$REPO/snapshots" + elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then + # there seems to be no staging docker registry? set to use SNAPSHOT also + #REPO=$MVN_DOCKERREGISTRY_RELEASE + REPO="$REPO" + else + echo "Fail to determine DEPLOYMENT_TYPE" + REPO="$REPO/unknown" + fi + + OLDTAG="${LFQI}" + PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest" + for NEWTAG in ${PUSHTAGS} + do + echo "tagging ${OLDTAG} to ${NEWTAG}" + docker tag "${OLDTAG}" "${NEWTAG}" + echo "pushing ${NEWTAG}" + docker push "${NEWTAG}" + OLDTAG="${NEWTAG}" + done + fi + +} + + + +# Customize the section below for each project case $MVN_PHASE in clean) echo "==> clean phase script" - # Nothing to do + clean_templated_files + rm -rf ./venv-* ./*.wgn ;; generate-sources) echo "==> generate-sources phase script" - # Nothing to do + expand_templates ;; compile) echo "==> compile phase script" - # Nothing to do ;; test) echo "==> test phase script" - # Nothing to do ;; package) echo "==> package phase script" - # Nothing to do ;; install) echo "==> install phase script" - # Nothing to do ;; deploy) echo "==> deploy phase script" - # Just upload files to Nexus - set -e -x - function setnetrc { - # Turn off -x so won't leak the credentials - set +x - hostport=$(echo $1 | cut -f3 -d /) - host=$(echo $hostport | cut -f1 -d:) - settings=$HOME/.m2/settings.xml - ( echo machine $host; echo login $(xpath $settings "//servers/server[id='$MVN_SERVER_ID']/username/text()"); echo password $(xpath $settings "//servers/server[id='$MVN_SERVER_ID']/password/text()") ) >$HOME/.netrc - chmod 600 $HOME/.netrc - set -x - } - function putraw { - curl -X PUT -H "Content-Type: text/plain" --netrc --upload-file $1 --url $REPO/$2 - } - setnetrc $REPO - putraw scripts/instconsulagentub16.sh cloud_init/instconsulagentub16.sh - putraw scripts/cdap-init.sh cloud_init/cdap-init.sh - set +e +x + case $MVN_PROJECT_MODULEID in + bootstrap) + build_and_push_docker + ;; + scripts) + upload_files_of_extension sh + ;; + *) + echo "====> unknown mvn project module" + ;; + esac ;; *) echo "==> unprocessed phase" |