Add CM container build

Change-Id: I13150c229ecd3871c889dbfa979522be2360249d
Issue-ID: DCAEGEN2-416
Signed-off-by: Jack Lucas <jflucas@research.att.com>

7 files changed, 290 insertions, 1 deletions

diff --git a/cm-container/Dockerfile-template b/cm-container/Dockerfile-template
new file mode 100644
index 0000000..7d97a24
--- /dev/null
+++ b/cm-container/Dockerfile-template
@@ -0,0 +1,34 @@
+# ============LICENSE_START=======================================================
+# org.onap.dcae
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+FROM cloudifyplatform/community:cloudify-manager-18.2.28
+MAINTAINER maintainer
+
+ENV TYPE_REPO {{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}
+# Store type files locally
+RUN pwd
+RUN mkdir scripts
+COPY get-type-files.sh scripts
+# Load our type files and the Cloudify 3.4 type files
+RUN scripts/get-type-files.sh ${TYPE_REPO}\
+    && mkdir /opt/manager/resources/spec/cloudify/3.4\
+    && curl -Ss https://cloudify.co/spec/cloudify/3.4/types.yaml > /opt/manager/resources/spec/cloudify/3.4/types.yaml\
+    && chown -R cfyuser:cfyuser /opt/manager/resources/spec/cloudify/3.4
+# Create mount point for CM config file
+RUN mkdir -p /opt/onap && chown cfyuser:cfyuser /opt/onap
diff --git a/cm-container/README.md b/cm-container/README.md
new file mode 100644
index 0000000..a29423d
--- /dev/null
+++ b/cm-container/README.md
@@ -0,0 +1,33 @@
+# Cloudify Manager Container Builder
+## Purpose
+The artifacts in this directory build a Docker image based on the
+public image from Cloudify (`cloudifyplatform/community`).  The
+image has the Cloudify Manager software from the base image
+and adds our types files.  It edits `/etc/cloudify/config.yaml`
+to configure the import resolver to use our local type files instead
+of fetching them over the Internet.   It adds
+Cloudify 3.4 type files that are still used in some plugins
+and blueprints.  Finally, it sets up the `/opt/onap` mount point
+for our config files.
+
+## Running the Container
+The container is intended to be launched via a Helm chart as part
+of the ONAP deployment process, guided by OOM. It can be run directly
+into a native Docker environment, using:
+```
+docker run --name cfy-mgr -d --restart unless-stopped \
+   -v /sys/fs/cgroup:/sys/fs/cgroup:ro \
+   -p <some_external_port>:80 \
+   --tmpfs /run \
+   --tmpfs /run/lock \
+   --security-opt seccomp:unconfined 
+   --cap-add SYS_ADMIN \
+   -v <path_to_kubeconfig_file>:/etc/cloudify/.kube/config
+   -v <path_to_config_file>:/opt/onap/config.txt
+   <image_name>
+```
+In a Kubernetes environment, we expect that the <path_to_kubeconfile_file> and the
+<path_to_config_file> mounts would be Kubernetes ConfigMaps.
+
+We also expect that in a Kubernetes environment the external port mapping would not be
+needed.
diff --git a/cm-container/get-type-files.sh b/cm-container/get-type-files.sh
new file mode 100755
index 0000000..038e8e0
--- /dev/null
+++ b/cm-container/get-type-files.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# ============LICENSE_START=======================================================
+# org.onap.dcae
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+# Pull type files from repos
+# Set up the CM import resolver
+# $1 is the repo URL
+#
+set -x
+DEST=/opt/manager/resources/onapspec
+ONAPTYPEFILES=\
+"\
+/dcaepolicyplugin/2.0.0/dcaepolicyplugin_types.yaml \
+/relationshipplugin/1.0.0/relationshipplugin_types.yaml \
+/k8splugin/1.0.0/k8splugin_types.yaml \
+
+"
+mkdir ${DEST}
+for typefile in ${ONAPTYPEFILES}
+do
+	mkdir -p ${DEST}/$(dirname ${typefile})
+	curl -Ss $1/${typefile} >> ${DEST}/${typefile}
+done
+chown cfyuser:cfyuser ${DEST}
+# Add our local type file store to CM import resolver configuration
+TYPE_RULE="{${TYPE_REPO}: file://${DEST}}"
+# This sed re is 'brittle' but we can be sure the config.yaml file
+# won't change as long as we do not change the source Docker image for CM
+sed -i -e "s#      rules:#      rules:\n      - ${TYPE_RULE}#" /etc/cloudify/config.yaml
+chown cfyuser:cfyuser /etc/cloudify/config.yaml
diff --git a/cm-container/pom.xml b/cm-container/pom.xml
new file mode 100644
index 0000000..35b2d66
--- /dev/null
+++ b/cm-container/pom.xml
@@ -0,0 +1,172 @@
+<?xml version="1.0"?>
+<!--
+================================================================================
+Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+================================================================================
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+     http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+============LICENSE_END=========================================================
+
+-->
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
+  <modelVersion>4.0.0</modelVersion>
+  <parent>
+    <groupId>org.onap.dcaegen2.deployments</groupId>
+    <artifactId>deployments</artifactId>
+    <version>1.2.0-SNAPSHOT</version>
+  </parent>
+  <groupId>org.onap.dcaegen2.deployments</groupId>
+  <artifactId>cm-container</artifactId>
+  <name>dcaegen2-deployments-cm-container</name>
+  <version>1.0.0</version>
+  <url>http://maven.apache.org</url>
+  <properties>
+    <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
+    <sonar.skip>true</sonar.skip>
+    <sonar.sources>.</sonar.sources>
+    <!-- customize the SONARQUBE URL -->
+    <!-- sonar.host.url>http://localhost:9000</sonar.host.url -->
+    <!-- below are language dependent -->
+    <!-- for Python -->
+    <sonar.language>py</sonar.language>
+    <sonar.pluginName>Python</sonar.pluginName>
+    <sonar.inclusions>**/*.py</sonar.inclusions>
+    <!-- for JavaScaript -->
+    <!--
+    <sonar.language>js</sonar.language>
+    <sonar.pluginName>JS</sonar.pluginName>
+    <sonar.inclusions>**/*.js</sonar.inclusions>
+    -->
+  </properties>
+  <build>
+    <finalName>${project.artifactId}-${project.version}</finalName>
+    <plugins>
+      <!-- plugin>
+        <artifactId>maven-assembly-plugin</artifactId>
+        <version>2.4.1</version>
+        <configuration>
+          <descriptors>
+            <descriptor>assembly/dep.xml</descriptor>
+          </descriptors>
+        </configuration>
+        <executions>
+          <execution>
+            <id>make-assembly</id>
+            <phase>package</phase>
+            <goals>
+              <goal>single</goal>
+            </goals>
+          </execution>
+        </executions>
+      </plugin -->
+      <!-- now we configure custom action (calling a script) at various lifecycle phases -->
+      <plugin>
+        <groupId>org.codehaus.mojo</groupId>
+        <artifactId>exec-maven-plugin</artifactId>
+        <version>1.2.1</version>
+        <executions>
+          <execution>
+            <id>clean phase script</id>
+            <phase>clean</phase>
+            <goals>
+              <goal>exec</goal>
+            </goals>
+            <configuration>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>clean</argument>
+              </arguments>
+            </configuration>
+          </execution>
+          <execution>
+            <id>generate-sources script</id>
+            <phase>generate-sources</phase>
+            <goals>
+              <goal>exec</goal>
+            </goals>
+            <configuration>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>generate-sources</argument>
+              </arguments>
+            </configuration>
+          </execution>
+          <execution>
+            <id>compile script</id>
+            <phase>compile</phase>
+            <goals>
+              <goal>exec</goal>
+            </goals>
+            <configuration>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>compile</argument>
+              </arguments>
+            </configuration>
+          </execution>
+          <execution>
+            <id>package script</id>
+            <phase>package</phase>
+            <goals>
+              <goal>exec</goal>
+            </goals>
+            <configuration>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>package</argument>
+              </arguments>
+            </configuration>
+          </execution>
+          <execution>
+            <id>test script</id>
+            <phase>test</phase>
+            <goals>
+              <goal>exec</goal>
+            </goals>
+            <configuration>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>test</argument>
+              </arguments>
+            </configuration>
+          </execution>
+          <execution>
+            <id>install script</id>
+            <phase>install</phase>
+            <goals>
+              <goal>exec</goal>
+            </goals>
+            <configuration>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>install</argument>
+              </arguments>
+            </configuration>
+          </execution>
+          <execution>
+            <id>deploy script</id>
+            <phase>deploy</phase>
+            <goals>
+              <goal>exec</goal>
+            </goals>
+            <configuration>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>deploy</argument>
+              </arguments>
+            </configuration>
+          </execution>
+        </executions>
+      </plugin>
+    </plugins>
+  </build>
+</project>
diff --git a/cm-container/test-expand.sh b/cm-container/test-expand.sh
new file mode 100755
index 0000000..0d5e8e5
--- /dev/null
+++ b/cm-container/test-expand.sh
@@ -0,0 +1,2 @@
+#!/bin/bash
+sed -e 's#{{ ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases }}#https://nexus.onap.org/content/sites/raw/org.onap.dcaegen2.platform.plugins/R2#g' Dockerfile-template > Dockerfile
diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh
index 58c43d3..58294da 100755
--- a/mvn-phase-script.sh
+++ b/mvn-phase-script.sh
@@ -83,7 +83,7 @@ deploy)
     upload_files_of_extension sh
     build_and_push_docker
     ;;
-  k8s-bootstrap|tca-cdap-container|cmcontainer|redis-cluster-container)
+  k8s-bootstrap|tca-cdap-container|cm-container|redis-cluster-container)
     build_and_push_docker
     ;;
   scripts|cloud_init)
diff --git a/pom.xml b/pom.xml
index d9ab7aa..f233acf 100644
--- a/pom.xml
+++ b/pom.xml
@@ -41,6 +41,7 @@ limitations under the License.
      <module>cloud_init</module>
      <module>redis-cluster-container</module>
      <module>tca-cdap-container</module>
+     <module>cm-container</module>
   </modules>
 
   <properties>