aboutsummaryrefslogtreecommitdiffstats
path: root/src/test/resources/dmaap-msg-router/MsgRtrApi.properties
diff options
context:
space:
mode:
Diffstat (limited to 'src/test/resources/dmaap-msg-router/MsgRtrApi.properties')
-rw-r--r--src/test/resources/dmaap-msg-router/MsgRtrApi.properties155
1 files changed, 155 insertions, 0 deletions
diff --git a/src/test/resources/dmaap-msg-router/MsgRtrApi.properties b/src/test/resources/dmaap-msg-router/MsgRtrApi.properties
new file mode 100644
index 00000000..d288bd23
--- /dev/null
+++ b/src/test/resources/dmaap-msg-router/MsgRtrApi.properties
@@ -0,0 +1,155 @@
+# LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+###############################################################################
+###############################################################################
+##
+## Cambria API Server config
+##
+## Default values are shown as commented settings.
+##
+###############################################################################
+##
+## HTTP service
+##
+## 3904 is standard as of 7/29/14.
+#
+## Zookeeper Connection
+##
+## Both Cambria and Kafka make use of Zookeeper.
+##
+#config.zk.servers=172.18.1.1
+#config.zk.servers={{.Values.zookeeper.name}}:{{.Values.zookeeper.port}}
+config.zk.servers=zookeeper
+#config.zk.root=/fe3c/cambria/config
+###############################################################################
+##
+## Kafka Connection
+##
+## Items below are passed through to Kafka's producer and consumer
+## configurations (after removing "kafka.")
+## if you want to change request.required.acks it can take this one value
+#kafka.metadata.broker.list=localhost:9092,localhost:9093
+#kafka.metadata.broker.list={{.Values.kafka.name}}:{{.Values.kafka.port}}
+kafka.metadata.broker.list=kafka:9092
+##kafka.request.required.acks=-1
+#kafka.client.zookeeper=${config.zk.servers}
+consumer.timeout.ms=100
+zookeeper.connection.timeout.ms=6000
+zookeeper.session.timeout.ms=20000
+zookeeper.sync.time.ms=2000
+auto.commit.interval.ms=1000
+fetch.message.max.bytes=1000000
+auto.commit.enable=false
+#(backoff*retries > zksessiontimeout)
+kafka.rebalance.backoff.ms=10000
+kafka.rebalance.max.retries=6
+###############################################################################
+##
+## Secured Config
+##
+## Some data stored in the config system is sensitive -- API keys and secrets,
+## for example. to protect it, we use an encryption layer for this section
+## of the config.
+##
+## The key is a base64 encode AES key. This must be created/configured for
+## each installation.
+#cambria.secureConfig.key=
+##
+## The initialization vector is a 16 byte value specific to the secured store.
+## This must be created/configured for each installation.
+#cambria.secureConfig.iv=
+## Southfield Sandbox
+cambria.secureConfig.key=b/7ouTn9FfEw2PQwL0ov/Q==
+cambria.secureConfig.iv=wR9xP5k5vbz/xD0LmtqQLw==
+authentication.adminSecret=fe3cCompound
+#cambria.secureConfig.key[pc569h]=YT3XPyxEmKCTLI2NK+Sjbw==
+#cambria.secureConfig.iv[pc569h]=rMm2jhR3yVnU+u2V9Ugu3Q==
+###############################################################################
+##
+## Consumer Caching
+##
+## Kafka expects live connections from the consumer to the broker, which
+## obviously doesn't work over connectionless HTTP requests. The Cambria
+## server proxies HTTP requests into Kafka consumer sessions that are kept
+## around for later re-use. Not doing so is costly for setup per request,
+## which would substantially impact a high volume consumer's performance.
+##
+## This complicates Cambria server failover, because we often need server
+## A to close its connection before server B brings up the replacement.
+##
+## The consumer cache is normally enabled.
+#cambria.consumer.cache.enabled=true
+## Cached consumers are cleaned up after a period of disuse. The server inspects
+## consumers every sweepFreqSeconds and will clean up any connections that are
+## dormant for touchFreqMs.
+#cambria.consumer.cache.sweepFreqSeconds=15
+cambria.consumer.cache.touchFreqMs=120000
+##stickforallconsumerrequests=false
+## The cache is managed through ZK. The default value for the ZK connection
+## string is the same as config.zk.servers.
+#cambria.consumer.cache.zkConnect=${config.zk.servers}
+
+##
+## Shared cache information is associated with this node's name. The default
+## name is the hostname plus the HTTP service port this host runs on. (The
+## hostname is determined via InetAddress.getLocalHost ().getCanonicalHostName(),
+## which is not always adequate.) You can set this value explicitly here.
+##
+#cambria.api.node.identifier=<use-something-unique-to-this-instance>
+
+#cambria.rateLimit.maxEmptyPollsPerMinute=30
+#cambria.rateLimitActual.delay.ms=10
+###############################################################################
+##
+## Metrics Reporting
+##
+## This server can report its metrics periodically on a topic.
+##
+#metrics.send.cambria.enabled=true
+#metrics.send.cambria.topic=cambria.apinode.metrics #msgrtr.apinode.metrics.dmaap
+#metrics.send.cambria.sendEverySeconds=60
+cambria.consumer.cache.zkBasePath=/fe3c/cambria/consumerCache
+consumer.timeout=17
+default.partitions=3
+default.replicas=3
+##############################################################################
+#100mb
+maxcontentlength=10000
+##############################################################################
+#AAF Properties
+msgRtr.namespace.aaf=org.onap.dmaap.mr.topic
+msgRtr.topicfactory.aaf=org.onap.dmaap.mr.topicFactory|:org.onap.dmaap.mr.topic:
+enforced.topic.name.AAF=org.onap.dmaap.mr
+forceAAF=false
+transidUEBtopicreqd=false
+defaultNSforUEB=org.onap.dmaap.mr
+##############################################################################
+#Mirror Maker Agent
+msgRtr.mirrormakeradmin.aaf=org.onap.dmaap.mr.mirrormaker|*|admin
+msgRtr.mirrormakeruser.aaf=org.onap.dmaap.mr.mirrormaker|*|user
+msgRtr.mirrormakeruser.aaf.create=org.onap.dmaap.mr.topicFactory|:org.onap.dmaap.mr.topic:
+msgRtr.mirrormaker.timeout=15000
+msgRtr.mirrormaker.topic=org.onap.dmaap.mr.mirrormakeragent
+msgRtr.mirrormaker.consumergroup=mmagentserver
+msgRtr.mirrormaker.consumerid=1
+kafka.max.poll.interval.ms=300000
+kafka.heartbeat.interval.ms=60000
+kafka.session.timeout.ms=240000
+kafka.max.poll.records=1000