1 files changed, 0 insertions, 203 deletions
diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh
deleted file mode 100755
index ea045de5..00000000
--- a/mvn-phase-script.sh
+++ /dev/null
@@ -1,203 +0,0 @@
-#!/bin/bash
-
-# ================================================================================
-# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-
-set -ex
-
-
-echo "running script: [$0] for module [$1] at stage [$2]"
-
-MVN_PROJECT_MODULEID="$1"
-MVN_PHASE="$2"
-
-
-PROJECT_ROOT=$(dirname $0)
-if [ -z "$WORKSPACE" ]; then
-  export WORKSPACE="$PROJECT_ROOT"
-fi
-
-
-FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
-if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
-  MVN_PROJECT_MODULEID=""
-fi
-
-if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
-  echo "=> for SNAPSHOT artifact build"
-  MVN_DEPLOYMENT_TYPE='SNAPSHOT'
-else
-  echo "=> for STAGING/RELEASE artifact build"
-  MVN_DEPLOYMENT_TYPE='STAGING'
-fi
-echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
-
-
-TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
-
-# expected environment variables
-if [ -z "${MVN_NEXUSPROXY}" ]; then
-    echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
-    exit
-fi
-MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
-echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
-
-if [ -z "$WORKSPACE" ]; then
-    WORKSPACE=$(pwd)
-fi
-
-if [ -z "$SETTINGS_FILE" ]; then
-    echo "SETTINGS_FILE environment variable not set.  Cannot proceed"
-    exit
-fi
-   
-
-
-# mvn phase in life cycle
-MVN_PHASE="$2"
-
-
-echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
-echo "MVN_PHASE is                       [$MVN_PHASE]"
-echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
-echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
-echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
-echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
-echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
-echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
-MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
-echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
-echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
-echo "MVN_DOCKERREGISTRY_DAILY is        [$MVN_DOCKERREGISTRY_DAILY]"
-echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
-
-
-source "${PROJECT_ROOT}"/mvn-phase-lib.sh 
-
-
-# Customize the section below for each project
-case $MVN_PHASE in
-clean)
-  echo "==> clean phase script"
-  clean_templated_files
-  clean_tox_files
-  rm -rf ./venv-* ./*.wgn ./site
-  ;;
-generate-sources)
-  echo "==> generate-sources phase script"
-  expand_templates
-  ;;
-compile)
-  echo "==> compile phase script"
-  ;;
-test)
-  echo "==> test phase script"
-  ;;
-package)
-  echo "==> package phase script"
-  ;;
-install)
-  echo "==> install phase script"
-  ;;
-deploy)
-  echo "==> deploy phase script"
-  
-  case $MVN_DEPLOYMENT_TYPE in
-    SNAPSHOT)
-      phase='merge'
-      ;;
-    STAGING)
-      phase='release'
-      ;;
-    *)
-      exit 1
-      ;;
-  esac
-
-  VERSION=$(xpath -e '//project/version/text()' 'pom.xml')
-  VERSION=${VERSION//\"/}
-  EXT=$(echo "$VERSION" | rev | cut -s -f1 -d'-' | rev)
-  if [ -z "$EXT" ]; then
-    EXT="STAGING"
-  fi
-  case $phase in
-    verify|merge)
-      if [ "$EXT" != 'SNAPSHOT' ]; then
-        echo "$phase job only takes SNAPSHOT version, got \"$EXT\" instead"
-        exit 1
-      fi
-      ;;
-    release)
-      if [ ! -z "$EXT" ] && [ "$EXT" != 'STAGING' ]; then
-        echo "$phase job only takes STAGING or pure numerical version, got \"$EXT\" instead"
-        exit 1
-      fi
-      ;;
-    *)
-      echo "Unknown phase \"$phase\""
-      exit 1
-  esac
-  echo "Running \"$phase\" job for version \"$VERSION\""
-
-  # unarchive the service manager
-  TARGET="${WORKSPACE}/target"
-  #STAGE="${TARGET}/stage"
-  STAGE=.
-  BASE_DIR="${STAGE}/opt/app"
-
-  # unarchive the collector
-  AR=${WORKSPACE}/target/VESCollector-${VERSION}-bundle.tar.gz
-  APP_DIR=${STAGE}/opt/app/VESCollector
-
-  [ -d "${STAGE}/opt/app/VESCollector-${VERSION}" ] && rm -rf "${STAGE}/opt/app/VESCollector-${VERSION}"
-
-  [ ! -f "${APP_DIR}" ] && mkdir -p "${APP_DIR}"
-
-  gunzip -c "${AR}" | tar xvf - -C "${APP_DIR}" --strip-components=1
-
-
-  if [ ! -f "${APP_DIR}/bin/docker-entry.sh" ]
-  then
-    echo "FATAL error cannot locate ${APP_DIR}/bin/docker-entry.sh"
-    exit 2
-  fi
-  cp -p ${APP_DIR}/bin/docker-entry.sh ${BASE_DIR}/docker-entry.sh
-  chmod 755 "${BASE_DIR}/docker-entry.sh"
-
-
-
-
-  #
-  # generate docker file
-  #
-  if [ ! -f "${APP_DIR}/Dockerfile" ]
-  then
-    echo "FATAL error cannot locate ${APP_DIR}/Dockerfile"
-    exit 2
-  fi
-  cp -p ${APP_DIR}/Dockerfile ${STAGE}/Dockerfile
-
-  BUILD_PATH="${WORKSPACE}/target/stage" 
-  build_and_push_docker 
-  ;;
-*)
-  echo "==> unprocessed phase"
-  ;;
-esac
-