aboutsummaryrefslogtreecommitdiffstats
path: root/etc
diff options
context:
space:
mode:
Diffstat (limited to 'etc')
-rw-r--r--etc/DmaapConfig.json48
-rwxr-xr-xetc/collector.properties148
-rw-r--r--etc/log4j.xml6
3 files changed, 106 insertions, 96 deletions
diff --git a/etc/DmaapConfig.json b/etc/DmaapConfig.json
index fd38d093..f144b382 100644
--- a/etc/DmaapConfig.json
+++ b/etc/DmaapConfig.json
@@ -1,20 +1,28 @@
-{
- "channels": [
- {
- "name": "ves_measurement",
- "cambria.topic": "unauthenticated.SEC_MEASUREMENT_OUTPUT",
- "class": "HpCambriaOutputStream",
- "stripHpId": "true",
- "type": "out",
- "cambria.hosts": "onap.dmaap.org"
- },
- {
- "name": "ves_fault",
- "cambria.topic": "unauthenticated.SEC_FAULT_OUTPUT",
- "class": "HpCambriaOutputStream",
- "stripHpId": "true",
- "type": "out",
- "cambria.hosts": "onap.dmaap.org"
- }
- ]
-}
+{
+ "channels": [
+ {
+ "name": "ves_measurement",
+ "cambria.topic": "unauthenticated.SEC_MEASUREMENT_OUTPUT",
+ "class": "HpCambriaOutputStream",
+ "stripHpId": "true",
+ "type": "out",
+ "cambria.hosts": "onap.dmaap.org"
+ },
+ {
+ "name": "ves_fault",
+ "cambria.topic": "unauthenticated.SEC_FAULT_OUTPUT",
+ "class": "HpCambriaOutputStream",
+ "stripHpId": "true",
+ "type": "out",
+ "cambria.hosts": "onap.dmaap.org"
+ },
+ {
+ "name": "ves_heartbeat",
+ "cambria.topic": "unauthenticated.SEC_FAULT_OUTPUT",
+ "class": "HpCambriaOutputStream",
+ "stripHpId": "true",
+ "type": "out",
+ "cambria.hosts": "onap.dmaap.org"
+ }
+ ]
+}
diff --git a/etc/collector.properties b/etc/collector.properties
index 26c12936..251cb02a 100755
--- a/etc/collector.properties
+++ b/etc/collector.properties
@@ -1,74 +1,74 @@
-###############################################################################
-##
-## Collector Server config
-##
-## - Default values are shown as commented settings.
-##
-###############################################################################
-##
-## HTTP(S) service
-##
-## Normally:
-##
-## - 8080 is http service
-## - https is disabled by default (-1)
-##
-## - At this time, the server always binds to 0.0.0.0
-##
-## The default port when header.authflag is disabled (0)
-collector.service.port=8080
-
-## The secure port is required if header.authflag is set to 1 (true)
-## Authentication is only supported via secure port
-## When enabled - require valid keystore defined
-collector.service.secure.port=8443
-
-## The keystore must be setup per installation when secure port is configured
-collector.keystore.file.location=../etc/keystore
-collector.keystore.passwordfile=./etc/passwordfile
-collector.keystore.alias=tomcat
-
-
-###############################################################################
-## Processing
-##
-## If there's a problem that prevents the collector from processing alarms,
-## it's normally better to apply back pressure to the caller than to try to
-## buffer beyond a reasonable size limit. With a limit, the server won't crash
-## due to being out of memory, and the caller will get a 5xx reply saying the
-## server is in trouble.
-collector.inputQueue.maxPending=8096
-
-## Schema Validation checkflag
-## default no validation checkflag (-1)
-## If enabled (1) - schemafile location must be specified
-collector.schema.checkflag=1
-collector.schema.file={\"v1\":\"./etc/CommonEventFormat_27.2.json\",\"v2\":\"./etc/CommonEventFormat_27.2.json\",\"v3\":\"./etc/CommonEventFormat_27.2.json\",\"v4\":\"./etc/CommonEventFormat_27.2.json\",\"v5\":\"./etc/CommonEventFormat_28.4.1.json\"}
-
-## List all streamid per domain to be supported. The streamid should match to channel name on dmaapfile
-collector.dmaap.streamid=fault=ves_fault,ves_fault_secondary|syslog=ves_syslog,ves_syslog_secondary|heartbeat=ves_heartbeat,ves_heartbeat_secondary|measurementsForVfScaling=ves_measurement,ves_measurement_secondary|mobileFlow=ves_mobileflow,ves_mobileflow_secondary|other=ves_other,ves_other_secondary|stateChange=ves_statechange,ves_statechange_secondary|thresholdCrossingAlert=ves_thresholdCrossingAlert,ves_thresholdCrossingAlert_secondary|voiceQuality=ves_voicequality,ves_voicequality_secondary|sipSignaling=ves_sipsignaling,ves_sipsignaling_secondary
-collector.dmaapfile=./etc/DmaapConfig.json
-
-## Custom ExceptionConfiguration
-exceptionConfig=./etc/ExceptionConfig.json
-
-## authflag control authentication by the collector
-## If enabled (1) - then authlist has to be defined
-## When authflag is enabled, only secure port will be supported
-## To disable enter 0
-header.authflag=1
-## Combination of userid,base64 encoded pwd list to be supported
-## userid and pwd comma separated; pipe delimitation between each pair
-header.authlist=sample1,c2FtcGxlMQ==
-
-## Event transformation Flag - when set expects configurable transformation
-## defined under ./etc/eventTransform.json
-## Enabled by default; to disable set to 0
-event.transform.flag=1
-
-###############################################################################
-##
-## Tomcat control
-##
-#tomcat.maxthreads=(tomcat default, which is usually 200)
-
+###############################################################################
+##
+## Collector Server config
+##
+## - Default values are shown as commented settings.
+##
+###############################################################################
+##
+## HTTP(S) service
+##
+## Normally:
+##
+## - 8080 is http service
+## - https is disabled by default (-1)
+##
+## - At this time, the server always binds to 0.0.0.0
+##
+## The default port when header.authflag is disabled (0)
+collector.service.port=8080
+
+## The secure port is required if header.authflag is set to 1 (true)
+## Authentication is only supported via secure port
+## When enabled - require valid keystore defined
+#ccollector.service.secure.port=8443
+
+## The keystore must be setup per installation when secure port is configured
+collector.keystore.file.location=../etc/keystore
+collector.keystore.passwordfile=./etc/passwordfile
+collector.keystore.alias=tomcat
+
+
+###############################################################################
+## Processing
+##
+## If there's a problem that prevents the collector from processing alarms,
+## it's normally better to apply back pressure to the caller than to try to
+## buffer beyond a reasonable size limit. With a limit, the server won't crash
+## due to being out of memory, and the caller will get a 5xx reply saying the
+## server is in trouble.
+collector.inputQueue.maxPending=8096
+
+## Schema Validation checkflag
+## default no validation checkflag (-1)
+## If enabled (1) - schemafile location must be specified
+collector.schema.checkflag=1
+collector.schema.file={\"v1\":\"./etc/CommonEventFormat_27.2.json\",\"v2\":\"./etc/CommonEventFormat_27.2.json\",\"v3\":\"./etc/CommonEventFormat_27.2.json\",\"v4\":\"./etc/CommonEventFormat_27.2.json\",\"v5\":\"./etc/CommonEventFormat_28.4.1.json\"}
+
+## List all streamid per domain to be supported. The streamid should match to channel name on dmaapfile
+collector.dmaap.streamid=fault=ves_fault,ves_fault_secondary|syslog=ves_syslog,ves_syslog_secondary|heartbeat=ves_heartbeat,ves_heartbeat_secondary|measurementsForVfScaling=ves_measurement,ves_measurement_secondary|mobileFlow=ves_mobileflow,ves_mobileflow_secondary|other=ves_other,ves_other_secondary|stateChange=ves_statechange,ves_statechange_secondary|thresholdCrossingAlert=ves_thresholdCrossingAlert,ves_thresholdCrossingAlert_secondary|voiceQuality=ves_voicequality,ves_voicequality_secondary|sipSignaling=ves_sipsignaling,ves_sipsignaling_secondary
+collector.dmaapfile=./etc/DmaapConfig.json
+
+## Custom ExceptionConfiguration
+exceptionConfig=./etc/ExceptionConfig.json
+
+## authflag control authentication by the collector
+## If enabled (1) - then authlist has to be defined
+## When authflag is enabled, only secure port will be supported
+## To disable enter 0
+header.authflag=0
+## Combination of userid,base64 encoded pwd list to be supported
+## userid and pwd comma separated; pipe delimitation between each pair
+header.authlist=sample1,c2FtcGxlMQ==
+
+## Event transformation Flag - when set expects configurable transformation
+## defined under ./etc/eventTransform.json
+## Enabled by default; to disable set to 0
+event.transform.flag=1
+
+###############################################################################
+##
+## Tomcat control
+##
+#tomcat.maxthreads=(tomcat default, which is usually 200)
+
diff --git a/etc/log4j.xml b/etc/log4j.xml
index dc5fe100..baf03559 100644
--- a/etc/log4j.xml
+++ b/etc/log4j.xml
@@ -1,3 +1,6 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
+
<!--
================================================================================
Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
@@ -17,8 +20,7 @@ limitations under the License.
ECOMP is a trademark and service mark of AT&T Intellectual Property.
-->
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
+
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/" debug="false">