diff options
Diffstat (limited to 'etc')
| -rw-r--r-- | etc/DmaapConfig.json | 48 | ||||
| -rwxr-xr-x | etc/collector.properties | 148 | ||||
| -rw-r--r-- | etc/log4j.xml | 6 |
3 files changed, 106 insertions, 96 deletions
diff --git a/etc/DmaapConfig.json b/etc/DmaapConfig.json index fd38d093..f144b382 100644 --- a/etc/DmaapConfig.json +++ b/etc/DmaapConfig.json @@ -1,20 +1,28 @@ -{ - "channels": [ - { - "name": "ves_measurement", - "cambria.topic": "unauthenticated.SEC_MEASUREMENT_OUTPUT", - "class": "HpCambriaOutputStream", - "stripHpId": "true", - "type": "out", - "cambria.hosts": "onap.dmaap.org" - }, - { - "name": "ves_fault", - "cambria.topic": "unauthenticated.SEC_FAULT_OUTPUT", - "class": "HpCambriaOutputStream", - "stripHpId": "true", - "type": "out", - "cambria.hosts": "onap.dmaap.org" - } - ] -} +{
+ "channels": [
+ {
+ "name": "ves_measurement",
+ "cambria.topic": "unauthenticated.SEC_MEASUREMENT_OUTPUT",
+ "class": "HpCambriaOutputStream",
+ "stripHpId": "true",
+ "type": "out",
+ "cambria.hosts": "onap.dmaap.org"
+ },
+ {
+ "name": "ves_fault",
+ "cambria.topic": "unauthenticated.SEC_FAULT_OUTPUT",
+ "class": "HpCambriaOutputStream",
+ "stripHpId": "true",
+ "type": "out",
+ "cambria.hosts": "onap.dmaap.org"
+ },
+ {
+ "name": "ves_heartbeat",
+ "cambria.topic": "unauthenticated.SEC_FAULT_OUTPUT",
+ "class": "HpCambriaOutputStream",
+ "stripHpId": "true",
+ "type": "out",
+ "cambria.hosts": "onap.dmaap.org"
+ }
+ ]
+}
diff --git a/etc/collector.properties b/etc/collector.properties index 26c12936..251cb02a 100755 --- a/etc/collector.properties +++ b/etc/collector.properties @@ -1,74 +1,74 @@ -############################################################################### -## -## Collector Server config -## -## - Default values are shown as commented settings. -## -############################################################################### -## -## HTTP(S) service -## -## Normally: -## -## - 8080 is http service -## - https is disabled by default (-1) -## -## - At this time, the server always binds to 0.0.0.0 -## -## The default port when header.authflag is disabled (0) -collector.service.port=8080 - -## The secure port is required if header.authflag is set to 1 (true) -## Authentication is only supported via secure port -## When enabled - require valid keystore defined -collector.service.secure.port=8443 - -## The keystore must be setup per installation when secure port is configured -collector.keystore.file.location=../etc/keystore -collector.keystore.passwordfile=./etc/passwordfile -collector.keystore.alias=tomcat - - -############################################################################### -## Processing -## -## If there's a problem that prevents the collector from processing alarms, -## it's normally better to apply back pressure to the caller than to try to -## buffer beyond a reasonable size limit. With a limit, the server won't crash -## due to being out of memory, and the caller will get a 5xx reply saying the -## server is in trouble. -collector.inputQueue.maxPending=8096 - -## Schema Validation checkflag -## default no validation checkflag (-1) -## If enabled (1) - schemafile location must be specified -collector.schema.checkflag=1 -collector.schema.file={\"v1\":\"./etc/CommonEventFormat_27.2.json\",\"v2\":\"./etc/CommonEventFormat_27.2.json\",\"v3\":\"./etc/CommonEventFormat_27.2.json\",\"v4\":\"./etc/CommonEventFormat_27.2.json\",\"v5\":\"./etc/CommonEventFormat_28.4.1.json\"} - -## List all streamid per domain to be supported. The streamid should match to channel name on dmaapfile -collector.dmaap.streamid=fault=ves_fault,ves_fault_secondary|syslog=ves_syslog,ves_syslog_secondary|heartbeat=ves_heartbeat,ves_heartbeat_secondary|measurementsForVfScaling=ves_measurement,ves_measurement_secondary|mobileFlow=ves_mobileflow,ves_mobileflow_secondary|other=ves_other,ves_other_secondary|stateChange=ves_statechange,ves_statechange_secondary|thresholdCrossingAlert=ves_thresholdCrossingAlert,ves_thresholdCrossingAlert_secondary|voiceQuality=ves_voicequality,ves_voicequality_secondary|sipSignaling=ves_sipsignaling,ves_sipsignaling_secondary -collector.dmaapfile=./etc/DmaapConfig.json - -## Custom ExceptionConfiguration -exceptionConfig=./etc/ExceptionConfig.json - -## authflag control authentication by the collector -## If enabled (1) - then authlist has to be defined -## When authflag is enabled, only secure port will be supported -## To disable enter 0 -header.authflag=1 -## Combination of userid,base64 encoded pwd list to be supported -## userid and pwd comma separated; pipe delimitation between each pair -header.authlist=sample1,c2FtcGxlMQ== - -## Event transformation Flag - when set expects configurable transformation -## defined under ./etc/eventTransform.json -## Enabled by default; to disable set to 0 -event.transform.flag=1 - -############################################################################### -## -## Tomcat control -## -#tomcat.maxthreads=(tomcat default, which is usually 200) - +###############################################################################
+##
+## Collector Server config
+##
+## - Default values are shown as commented settings.
+##
+###############################################################################
+##
+## HTTP(S) service
+##
+## Normally:
+##
+## - 8080 is http service
+## - https is disabled by default (-1)
+##
+## - At this time, the server always binds to 0.0.0.0
+##
+## The default port when header.authflag is disabled (0)
+collector.service.port=8080
+
+## The secure port is required if header.authflag is set to 1 (true)
+## Authentication is only supported via secure port
+## When enabled - require valid keystore defined
+#ccollector.service.secure.port=8443
+
+## The keystore must be setup per installation when secure port is configured
+collector.keystore.file.location=../etc/keystore
+collector.keystore.passwordfile=./etc/passwordfile
+collector.keystore.alias=tomcat
+
+
+###############################################################################
+## Processing
+##
+## If there's a problem that prevents the collector from processing alarms,
+## it's normally better to apply back pressure to the caller than to try to
+## buffer beyond a reasonable size limit. With a limit, the server won't crash
+## due to being out of memory, and the caller will get a 5xx reply saying the
+## server is in trouble.
+collector.inputQueue.maxPending=8096
+
+## Schema Validation checkflag
+## default no validation checkflag (-1)
+## If enabled (1) - schemafile location must be specified
+collector.schema.checkflag=1
+collector.schema.file={\"v1\":\"./etc/CommonEventFormat_27.2.json\",\"v2\":\"./etc/CommonEventFormat_27.2.json\",\"v3\":\"./etc/CommonEventFormat_27.2.json\",\"v4\":\"./etc/CommonEventFormat_27.2.json\",\"v5\":\"./etc/CommonEventFormat_28.4.1.json\"}
+
+## List all streamid per domain to be supported. The streamid should match to channel name on dmaapfile
+collector.dmaap.streamid=fault=ves_fault,ves_fault_secondary|syslog=ves_syslog,ves_syslog_secondary|heartbeat=ves_heartbeat,ves_heartbeat_secondary|measurementsForVfScaling=ves_measurement,ves_measurement_secondary|mobileFlow=ves_mobileflow,ves_mobileflow_secondary|other=ves_other,ves_other_secondary|stateChange=ves_statechange,ves_statechange_secondary|thresholdCrossingAlert=ves_thresholdCrossingAlert,ves_thresholdCrossingAlert_secondary|voiceQuality=ves_voicequality,ves_voicequality_secondary|sipSignaling=ves_sipsignaling,ves_sipsignaling_secondary
+collector.dmaapfile=./etc/DmaapConfig.json
+
+## Custom ExceptionConfiguration
+exceptionConfig=./etc/ExceptionConfig.json
+
+## authflag control authentication by the collector
+## If enabled (1) - then authlist has to be defined
+## When authflag is enabled, only secure port will be supported
+## To disable enter 0
+header.authflag=0
+## Combination of userid,base64 encoded pwd list to be supported
+## userid and pwd comma separated; pipe delimitation between each pair
+header.authlist=sample1,c2FtcGxlMQ==
+
+## Event transformation Flag - when set expects configurable transformation
+## defined under ./etc/eventTransform.json
+## Enabled by default; to disable set to 0
+event.transform.flag=1
+
+###############################################################################
+##
+## Tomcat control
+##
+#tomcat.maxthreads=(tomcat default, which is usually 200)
+
diff --git a/etc/log4j.xml b/etc/log4j.xml index dc5fe100..baf03559 100644 --- a/etc/log4j.xml +++ b/etc/log4j.xml @@ -1,3 +1,6 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd"> + <!-- ================================================================================ Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved. @@ -17,8 +20,7 @@ limitations under the License. ECOMP is a trademark and service mark of AT&T Intellectual Property. --> -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd"> + <log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/" debug="false"> |