summaryrefslogtreecommitdiffstats
path: root/etc/collector.properties
diff options
context:
space:
mode:
authorVijay VK <vv770d@att.com>2018-02-18 06:17:21 +0000
committerVENKATESH KUMAR <vv770d@att.com>2018-02-18 01:18:13 -0500
commit38cf7559268bf543879f76d00384c3869d1d174f (patch)
tree360872d530638ab6b559707802bd9a7756ab1d3c /etc/collector.properties
parent4d3624549f41aeda68b8626270fc491ea99e5ee0 (diff)
additional testcase
Change-Id: Ib4fcdf3754c43f4d1996ea50b888d976e728705a Signed-off-by: VENKATESH KUMAR <vv770d@att.com> Issue-ID: DCAEGEN2-227
Diffstat (limited to 'etc/collector.properties')
-rwxr-xr-xetc/collector.properties148
1 files changed, 74 insertions, 74 deletions
diff --git a/etc/collector.properties b/etc/collector.properties
index 26c12936..251cb02a 100755
--- a/etc/collector.properties
+++ b/etc/collector.properties
@@ -1,74 +1,74 @@
-###############################################################################
-##
-## Collector Server config
-##
-## - Default values are shown as commented settings.
-##
-###############################################################################
-##
-## HTTP(S) service
-##
-## Normally:
-##
-## - 8080 is http service
-## - https is disabled by default (-1)
-##
-## - At this time, the server always binds to 0.0.0.0
-##
-## The default port when header.authflag is disabled (0)
-collector.service.port=8080
-
-## The secure port is required if header.authflag is set to 1 (true)
-## Authentication is only supported via secure port
-## When enabled - require valid keystore defined
-collector.service.secure.port=8443
-
-## The keystore must be setup per installation when secure port is configured
-collector.keystore.file.location=../etc/keystore
-collector.keystore.passwordfile=./etc/passwordfile
-collector.keystore.alias=tomcat
-
-
-###############################################################################
-## Processing
-##
-## If there's a problem that prevents the collector from processing alarms,
-## it's normally better to apply back pressure to the caller than to try to
-## buffer beyond a reasonable size limit. With a limit, the server won't crash
-## due to being out of memory, and the caller will get a 5xx reply saying the
-## server is in trouble.
-collector.inputQueue.maxPending=8096
-
-## Schema Validation checkflag
-## default no validation checkflag (-1)
-## If enabled (1) - schemafile location must be specified
-collector.schema.checkflag=1
-collector.schema.file={\"v1\":\"./etc/CommonEventFormat_27.2.json\",\"v2\":\"./etc/CommonEventFormat_27.2.json\",\"v3\":\"./etc/CommonEventFormat_27.2.json\",\"v4\":\"./etc/CommonEventFormat_27.2.json\",\"v5\":\"./etc/CommonEventFormat_28.4.1.json\"}
-
-## List all streamid per domain to be supported. The streamid should match to channel name on dmaapfile
-collector.dmaap.streamid=fault=ves_fault,ves_fault_secondary|syslog=ves_syslog,ves_syslog_secondary|heartbeat=ves_heartbeat,ves_heartbeat_secondary|measurementsForVfScaling=ves_measurement,ves_measurement_secondary|mobileFlow=ves_mobileflow,ves_mobileflow_secondary|other=ves_other,ves_other_secondary|stateChange=ves_statechange,ves_statechange_secondary|thresholdCrossingAlert=ves_thresholdCrossingAlert,ves_thresholdCrossingAlert_secondary|voiceQuality=ves_voicequality,ves_voicequality_secondary|sipSignaling=ves_sipsignaling,ves_sipsignaling_secondary
-collector.dmaapfile=./etc/DmaapConfig.json
-
-## Custom ExceptionConfiguration
-exceptionConfig=./etc/ExceptionConfig.json
-
-## authflag control authentication by the collector
-## If enabled (1) - then authlist has to be defined
-## When authflag is enabled, only secure port will be supported
-## To disable enter 0
-header.authflag=1
-## Combination of userid,base64 encoded pwd list to be supported
-## userid and pwd comma separated; pipe delimitation between each pair
-header.authlist=sample1,c2FtcGxlMQ==
-
-## Event transformation Flag - when set expects configurable transformation
-## defined under ./etc/eventTransform.json
-## Enabled by default; to disable set to 0
-event.transform.flag=1
-
-###############################################################################
-##
-## Tomcat control
-##
-#tomcat.maxthreads=(tomcat default, which is usually 200)
-
+###############################################################################
+##
+## Collector Server config
+##
+## - Default values are shown as commented settings.
+##
+###############################################################################
+##
+## HTTP(S) service
+##
+## Normally:
+##
+## - 8080 is http service
+## - https is disabled by default (-1)
+##
+## - At this time, the server always binds to 0.0.0.0
+##
+## The default port when header.authflag is disabled (0)
+collector.service.port=8080
+
+## The secure port is required if header.authflag is set to 1 (true)
+## Authentication is only supported via secure port
+## When enabled - require valid keystore defined
+#ccollector.service.secure.port=8443
+
+## The keystore must be setup per installation when secure port is configured
+collector.keystore.file.location=../etc/keystore
+collector.keystore.passwordfile=./etc/passwordfile
+collector.keystore.alias=tomcat
+
+
+###############################################################################
+## Processing
+##
+## If there's a problem that prevents the collector from processing alarms,
+## it's normally better to apply back pressure to the caller than to try to
+## buffer beyond a reasonable size limit. With a limit, the server won't crash
+## due to being out of memory, and the caller will get a 5xx reply saying the
+## server is in trouble.
+collector.inputQueue.maxPending=8096
+
+## Schema Validation checkflag
+## default no validation checkflag (-1)
+## If enabled (1) - schemafile location must be specified
+collector.schema.checkflag=1
+collector.schema.file={\"v1\":\"./etc/CommonEventFormat_27.2.json\",\"v2\":\"./etc/CommonEventFormat_27.2.json\",\"v3\":\"./etc/CommonEventFormat_27.2.json\",\"v4\":\"./etc/CommonEventFormat_27.2.json\",\"v5\":\"./etc/CommonEventFormat_28.4.1.json\"}
+
+## List all streamid per domain to be supported. The streamid should match to channel name on dmaapfile
+collector.dmaap.streamid=fault=ves_fault,ves_fault_secondary|syslog=ves_syslog,ves_syslog_secondary|heartbeat=ves_heartbeat,ves_heartbeat_secondary|measurementsForVfScaling=ves_measurement,ves_measurement_secondary|mobileFlow=ves_mobileflow,ves_mobileflow_secondary|other=ves_other,ves_other_secondary|stateChange=ves_statechange,ves_statechange_secondary|thresholdCrossingAlert=ves_thresholdCrossingAlert,ves_thresholdCrossingAlert_secondary|voiceQuality=ves_voicequality,ves_voicequality_secondary|sipSignaling=ves_sipsignaling,ves_sipsignaling_secondary
+collector.dmaapfile=./etc/DmaapConfig.json
+
+## Custom ExceptionConfiguration
+exceptionConfig=./etc/ExceptionConfig.json
+
+## authflag control authentication by the collector
+## If enabled (1) - then authlist has to be defined
+## When authflag is enabled, only secure port will be supported
+## To disable enter 0
+header.authflag=0
+## Combination of userid,base64 encoded pwd list to be supported
+## userid and pwd comma separated; pipe delimitation between each pair
+header.authlist=sample1,c2FtcGxlMQ==
+
+## Event transformation Flag - when set expects configurable transformation
+## defined under ./etc/eventTransform.json
+## Enabled by default; to disable set to 0
+event.transform.flag=1
+
+###############################################################################
+##
+## Tomcat control
+##
+#tomcat.maxthreads=(tomcat default, which is usually 200)
+