copyright and controller ENV changes

Change-Id: Ic12aa439a03f19c7a06a536368a8d2a1f26855aa
Issue-ID: DCAEGEN2-271
Signed-off-by: Ladue, David (dl3158) <dl3158@att.com>

1 files changed, 0 insertions, 193 deletions

diff --git a/src/mod/trapd_yaml_config.py b/src/mod/trapd_yaml_config.py
deleted file mode 100644
index f0d12e3..0000000
--- a/src/mod/trapd_yaml_config.py
+++ /dev/null
@@ -1,193 +0,0 @@
-# ============LICENSE_START=======================================================
-# org.onap.dcae
-# ================================================================================
-# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-"""
-Read the SNMP trap receiver YAML config file, which contains the vast
-majority of configurable parameters for the process, including
-location of other config files, http timeouts, dns cache times,
-etc.
-"""
-
-__docformat__ = 'restructuredtext'
-
-import os
-import sys
-import string
-import time
-import traceback
-import collections
-import yaml
-from trapd_exit import cleanup_and_exit
-
-
-prog_name = os.path.basename(__file__)
-
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# function: get_yaml_cfg
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-
-
-def read_yaml_config(loc_yaml_conf_file):
-    """
-    Load all sorts of goodies from yaml config file.
-    :Parameters:
-      loc_yaml_conf_file
-        filename including full path to yaml config file
-    :Exceptions:
-      file open
-        this function will throw an exception if unable to open
-        loc_yaml_conf_file (fatal error) or any of the required
-        values are not found in the loc_yaml_conf_file (fatal error)
-    :Keywords:
-      yaml config runtime protocol files dmaap
-    :Variables:
-      yc_transport
-        protocol transport for snmp traps (udp|tcp)
-      yc_ipv4_interface
-        what ipv4 interface to listen for traps on
-      yc_ipv4_port
-        what port to listen for traps on
-      yc_dns_cache_ttl_seconds
-        how many seconds an entry remains in DNS cache prior to refresh
-      yc_runtime_base_dir
-        base directory of dcae_snmptrapd application
-      yc_log_dir
-        log directory of dcae_snmptrapd application
-      yc_data_dir
-        data directory of dcae_snmptrapd application
-      yc_pid_dir
-        directory where running PID file will be written (filename <yc_pid_dir>/<prog_name>.pid)
-      yc_trapd_diag
-        program diagnostic log, auto rotated and archived via python handler
-      yc_raw_traps_log
-        file to write raw trap data to
-      yc_published_traps_dir
-        file to write json formatted trap data for successful publishes (only!)
-      yc_trap_stats_log
-        file to write trap stats (traps per second, by OID, by agent)
-      yc_perm_status_file
-        file to write trap stats (traps per second, by OID, by agent)
-      yc_dmaap_conf
-        file (full path) of yaml config entries referenced at runtime, passed as
-        runtime command argument "-c <yc_dmaap_conf>
-      yc_http_timeout
-        http timeout in seconds for dmaap publish attempt
-      yc_http_retries
-        num of http retries to attempt in response to failed post
-      yc_primary_publisher
-        boolean defining whether local instance is primary (future use)
-      yc_peer_publisher
-        identity of peer publisher in case this one fails (future use)
-      yc_max_traps_between_publish
-        if batching publishes, max number of traps to queue before http post
-      yc_max_milliseconds_between_publish
-        if batching publishes, max number of milliseconds between http post
-        Note:  using the batch feature creates an opportunity for trap loss if
-        traps stop arriving and the process exits (traps in queue will remain
-        there until another trap arrives and kicks of the evaluation of max_traps
-        or max_milliseconds above).
-    """
-
-    # named tuple for values in yaml config file
-    _yaml_config_values_nt = collections.namedtuple('yaml_config_values', ['yc_transport', 'yc_ipv4_port', 'yc_ipv4_interface', 'yc_ipv6_port', 'yc_ipv6_interface', 'yc_dns_cache_ttl_seconds', 'yc_runtime_base_dir', 'yc_log_dir', 'yc_data_dir', 'yc_pid_dir', 'yc_trap_conf', 'yc_trapd_diag',
-                                                                           'yc_raw_traps_log', 'yc_published_traps_dir', 'yc_trap_stats_log', 'yc_perm_status_file', 'yc_dmaap_conf', 'yc_http_timeout', 'yc_http_retries', 'yc_http_secs_between_retries', 'yc_primary_publisher', 'yc_peer_publisher', 'yc_max_traps_between_publish', 'yc_max_milliseconds_between_publish'])
-
-    with open(loc_yaml_conf_file, 'r') as yaml_fd:
-        cfg_data = yaml.load(yaml_fd)
-
-    # ONAP FIXME: split try into per-section except loops below
-    try:
-        # protocol
-        yc_transport = (cfg_data['protocol']['transport'])
-        yc_ipv4_interface = (cfg_data['protocol']['ipv4_interface'])
-        yc_ipv4_port = int(cfg_data['protocol']['ipv4_port'])
-        yc_ipv6_interface = (cfg_data['protocol']['ipv6_interface'])
-        yc_ipv6_port = int(cfg_data['protocol']['ipv6_port'])
-        yc_dns_cache_ttl_seconds = int(
-            cfg_data['protocol']['dns_cache_ttl_seconds'])
-
-        # files and directories
-        yc_runtime_base_dir = (cfg_data['files']['runtime_base_dir'])
-        yc_log_dir = (cfg_data['files']['log_dir'])
-        yc_data_dir = (cfg_data['files']['data_dir'])
-        yc_pid_dir = (cfg_data['files']['pid_dir'])
-        yc_trap_conf = (cfg_data['files']['trap_conf'])
-        yc_trapd_diag = (cfg_data['files']['snmptrapd_diag'])
-        yc_raw_traps_log = (cfg_data['files']['raw_traps_log'])
-        yc_published_traps_dir = (cfg_data['files']['published_traps_dir'])
-        yc_trap_stats_log = (cfg_data['files']['trap_stats_log'])
-        yc_perm_status_file = (cfg_data['files']['perm_status_file'])
-
-        # dmaap
-        yc_dmaap_conf = (cfg_data['dmaap']['dmaap_conf'])
-        yc_http_timeout = (cfg_data['dmaap']['http_timeout'])
-        yc_http_retries = (cfg_data['dmaap']['http_retries'])
-        yc_http_secs_between_retries = (
-            cfg_data['dmaap']['http_secs_between_retries'])
-        yc_primary_publisher = (cfg_data['dmaap']['primary_publisher'])
-        yc_peer_publisher = (cfg_data['dmaap']['peer_publisher'])
-        yc_max_traps_between_publish = (
-            cfg_data['dmaap']['max_traps_between_publish'])
-        yc_max_milliseconds_between_publish = (
-            cfg_data['dmaap']['max_milliseconds_between_publish'])
-
-    except:
-        print("ERROR reading config:    %s" % loc_yaml_conf_file)
-        raise
-        cleanup_and_exit(1, "undefined")
-
-    # print back for confirmation
-    print("Configs read from: %s" % loc_yaml_conf_file)
-    print("    protocol section:")
-    print("        transport: %s" % yc_transport)
-    print("        ipv4_port: %s" % yc_ipv4_port)
-    print("        ipv4_interface: %s" % yc_ipv4_interface)
-    print("        ipv6_port: %s" % yc_ipv6_port)
-    print("        ipv6_interface: %s" % yc_ipv6_interface)
-    print("        dns_cache_ttl_seconds: %s" % yc_dns_cache_ttl_seconds)
-    print("    files section:")
-    print("        runtime_base_dir: %s" % yc_runtime_base_dir)
-    print("        log_dir: %s" % yc_log_dir)
-    print("        data_dir: %s" % yc_data_dir)
-    print("        pid_dir: %s" % yc_pid_dir)
-    print("        trap_conf: %s" % yc_trap_conf)
-    print("        snmptrapd_diag: %s" % yc_trapd_diag)
-    print("        raw_traps_log: %s" % yc_raw_traps_log)
-    print("        published_traps_dir: %s" % yc_published_traps_dir)
-    print("        trap_stats_log: %s" % yc_trap_stats_log)
-    print("        perm_status_file: %s" % yc_perm_status_file)
-    print("    dmaap section:")
-    print("        dmaap_config_file: %s" % yc_dmaap_conf)
-    print("        http_timeout: %s" % yc_http_timeout)
-    print("        http_retries: %s" % yc_http_retries)
-    print("        http_secs_between_retries: %s" %
-          yc_http_secs_between_retries)
-    print("        primary_publisher: %s" % yc_primary_publisher)
-    print("        peer_publisher: %s" % yc_peer_publisher)
-    print("        max_traps_between_publish: %s" %
-          yc_max_traps_between_publish)
-    print("        max_milliseconds_between_publish: %s" %
-          yc_max_milliseconds_between_publish)
-
-    _yaml_config_values = _yaml_config_values_nt(yc_transport=yc_transport, yc_ipv4_port=yc_ipv4_port, yc_ipv4_interface=yc_ipv4_interface, yc_ipv6_port=yc_ipv6_port, yc_ipv6_interface=yc_ipv6_interface, yc_dns_cache_ttl_seconds=yc_dns_cache_ttl_seconds, yc_runtime_base_dir=yc_runtime_base_dir, yc_log_dir=yc_log_dir, yc_data_dir=yc_data_dir, yc_pid_dir=yc_pid_dir, yc_trap_conf=yc_trap_conf, yc_trapd_diag=yc_trapd_diag, yc_raw_traps_log=yc_raw_traps_log, yc_published_traps_dir=yc_published_traps_dir,
-                                                 yc_trap_stats_log=yc_trap_stats_log, yc_perm_status_file=yc_perm_status_file, yc_dmaap_conf=yc_dmaap_conf, yc_http_timeout=yc_http_timeout, yc_http_retries=yc_http_retries, yc_http_secs_between_retries=yc_http_secs_between_retries, yc_primary_publisher=yc_primary_publisher, yc_peer_publisher=yc_peer_publisher, yc_max_traps_between_publish=yc_max_traps_between_publish, yc_max_milliseconds_between_publish=yc_max_milliseconds_between_publish)
-
-    return _yaml_config_values