dcaegen2 snmptrap seedcode

Initial seed code delivery for snmptrap receiver for
support on the gen2dcae platform

Issue-ID: DCAEGEN2-55

Change-Id: I87365c2f07ffd55a3c2778d7c05a152818f625f8
Signed-off-by: Ladue, David (dl3158) <dl3158@att.com>

9 files changed, 1314 insertions, 0 deletions

diff --git a/.gitreview b/.gitreview
new file mode 100644
index 0000000..3535357
--- /dev/null
+++ b/.gitreview
@@ -0,0 +1,4 @@
+[gerrit]
+host=gerrit.onap.org
+port=29418
+project=dcaegen2/collectors/snmptrap.git
diff --git a/LICENSE.txt b/LICENSE.txt
new file mode 100644
index 0000000..22d3915
--- /dev/null
+++ b/LICENSE.txt
@@ -0,0 +1,30 @@
+============LICENSE_START=======================================================
+org.onap.dcae
+================================================================================
+Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+================================================================================
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+ 
+     http://www.apache.org/licenses/LICENSE-2.0
+ 
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+===================================================================
+===================================================================
+Licensed under the Creative Commons License, Attribution 4.0 Intl.  (the "License");
+you may not use this documentation except in compliance with the License.
+You may obtain a copy of the License at
+       https://creativecommons.org/licenses/by/4.0/
+ 
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+============LICENSE_END=========================================================
+ECOMP is a trademark and service mark of AT&T Intellectual Property.
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..f85232d
--- /dev/null
+++ b/README.md
@@ -0,0 +1,20 @@
+DCAE SNMPTrapReceiver
+======================================
+
+FIXME: placeholder for dcae_snmptrap application
+
+This is the repository for SNMP Trap Receiver for Open DCAE. 
+
+### Build Instructions
+
+This project is organized as a mvn project for a python application.
+
+```
+git clone ssh://git@<repo-address>:dcae-collectors/snmptrap.git
+mvn clean install
+```
+
+### to be completed
+
+The application is bundled into a docker image installed by the DCAE Controller. Following is the process to creating the image
+
diff --git a/etc/dcae_snmptrapd.yaml b/etc/dcae_snmptrapd.yaml
new file mode 100644
index 0000000..c3c7f06
--- /dev/null
+++ b/etc/dcae_snmptrapd.yaml
@@ -0,0 +1,24 @@
+protocol:
+    transport: udp
+    interface: localhost
+    port: 6163
+    dns_cache_ttl_seconds: 60
+
+files:
+    runtime_base_dir: /opt/app/dcae_snmptrapd
+    log_dir: /opt/app/dcae_snmptrapd/logs
+    data_dir: /opt/app/dcae_snmptrapd/data
+    pid_dir: /var/tmp
+    dcae_snmptrapd_diag: /opt/app/dcae_snmptrapd/logs/dcae_snmptrapd.log
+    raw_traps_log: /opt/app/dcae_snmptrapd/logs/trapd.log
+    published_traps_dir: /opt/app/dcae_snmptrapd/logs
+    trap_stats_log: /opt/app/dcae_snmptrapd/logs/dcae_snmptrapd_stats.csv
+    perm_status_file: /opt/app/dcae_snmptrapd/logs/dcae_snmptrapd.permStatus.log
+
+ueb:
+    dmaap_conf: /etc/dcae/dmaap.conf
+    http_timeout: 5
+    primary_publisher: true
+    peer_publisher: null
+    max_traps_between_publish: 50
+    max_milliseconds_between_publish: 3500
diff --git a/etc/dcae_snmptrapd_logging.yaml b/etc/dcae_snmptrapd_logging.yaml
new file mode 100644
index 0000000..586e3cb
--- /dev/null
+++ b/etc/dcae_snmptrapd_logging.yaml
@@ -0,0 +1,40 @@
+version: 1
+disable_existing_loggers: False
+formatters:
+    simple:
+        format: "%(levelname)s|%(asctime)s|%(name)s|%(process)d|%(funcName)s|'%(message)s"
+
+handlers:
+    console:
+        class: logging.StreamHandler
+        level: DEBUG
+        formatter: simple
+        stream: ext://sys.stdout
+
+    info_file_handler:
+        class: logging.handlers.RotatingFileHandler
+        level: INFO
+        formatter: simple
+        filename: info.log
+        maxBytes: 10480000 # 10MB
+        backupCount: 10
+        encoding: utf8
+
+    error_file_handler:
+        class: logging.handlers.RotatingFileHandler
+        level: ERROR
+        formatter: simple
+        filename: errors.log
+        maxBytes: 6144000 # 6MB
+        backupCount: 10 
+        encoding: utf8
+
+loggers:
+    my_module:
+        level: ERROR
+        handlers: [console]
+        propagate: no
+
+root:
+    level: INFO
+    handlers: [console, info_file_handler, error_file_handler]
diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh
new file mode 100644
index 0000000..6399837
--- /dev/null
+++ b/mvn-phase-script.sh
@@ -0,0 +1,49 @@
+#!/bin/bash
+
+echo "running script: [$0] for module [$1] at stage [$2]"
+
+echo "=> Prepare environment "
+#env
+
+TIMESTAMP=$(date +%C%y%m%dT%H%M%S) 
+export BUILD_NUMBER="${TIMESTAMP}"
+
+# expected environment variables 
+if [ -z "${MVN_NEXUSPROXY}" ]; then
+    echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
+    exit
+fi
+MVN_NEXUSPROXY_HOST=$(echo $MVN_NEXUSPROXY |cut -f3 -d'/' | cut -f1 -d':')
+
+
+# use the version text detect which phase we are in in LF CICD process: verify, merge, or (daily) release
+
+# mvn phase in life cycle 
+MVN_PHASE="$2"
+
+case $MVN_PHASE in
+clean)
+  echo "==> clean phase script"
+  ;;
+generate-sources)
+  echo "==> generate-sources phase script"
+  ;;
+compile)
+  echo "==> compile phase script"
+  ;;
+test)
+  echo "==> test phase script"
+  ;;
+package)
+  echo "==> package phase script"
+  ;;
+install)
+  echo "==> install phase script"
+  ;;
+deploy)
+  echo "==> deploy phase script"
+  ;;
+*)
+  echo "==> unprocessed phase"
+  ;;
+esac
diff --git a/pom.xml b/pom.xml
new file mode 100644
index 0000000..95cbe2e
--- /dev/null
+++ b/pom.xml
@@ -0,0 +1,286 @@
+<?xml version="1.0"?>
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
+  <modelVersion>4.0.0</modelVersion>
+  <parent>
+    <groupId>org.onap.oparent</groupId>
+    <artifactId>oparent</artifactId>
+    <version>1.0.0-SNAPSHOT</version>
+  </parent>
+  <!-- parent>
+           <groupId>org.onap.dcae.platform</groupId>
+    <artifactId>plugins</artifactId>
+    <version>1.0.0</version>
+  </parent -->
+
+  <!--- CHANGE THE FOLLOWING 3 OBJECTS for your own repo -->
+  <groupId>org.onap.dcaegen2.collectors</groupId>
+  <artifactId>snmptrap</artifactId>
+  <name>dcae_snmptrap</name>
+  
+  <version>1.0.0-SNAPSHOT</version>
+  <url>http://maven.apache.org</url>
+  <properties>
+    <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
+    <sonar.sources>.</sonar.sources>
+    <!-- customize the SONARQUBE URL -->
+    <sonar.host.url>http://localhost:9000</sonar.host.url>
+    <!-- below are language dependent -->
+    <!-- for Python -->
+    <sonar.language>py</sonar.language>
+    <sonar.pluginName>Python</sonar.pluginName>
+    <sonar.inclusions>**/*.py</sonar.inclusions>
+    <!-- for JavaScaript -->
+    <!--
+             <sonar.language>js</sonar.language>
+    <sonar.pluginName>JS</sonar.pluginName>
+    <sonar.inclusions>**/*.js</sonar.inclusions>
+    -->
+  </properties>
+
+  <build>
+    <finalName>${project.artifactId}-${project.version}</finalName>
+    <pluginManagement>
+      <plugins>
+        <plugin>
+          <groupId>org.codehaus.mojo</groupId>
+          <artifactId>sonar-maven-plugin</artifactId>
+          <version>2.7.1</version>
+        </plugin>
+      </plugins>
+    </pluginManagement>
+
+    <plugins>
+      <!-- plugin>
+                   <artifactId>maven-assembly-plugin</artifactId>
+        <version>2.4.1</version>
+        <configuration>
+          <descriptors>
+            <descriptor>assembly/dep.xml</descriptor>
+          </descriptors>
+        </configuration>
+        <executions>
+          <execution>
+            <id>make-assembly</id>
+            <phase>package</phase>
+            <goals>
+              <goal>single</goal>
+            </goals>
+          </execution>
+        </executions>
+      </plugin -->
+
+      <!-- first disable the default Java plugins at various stages -->
+      <!-- maven-resources-plugin is called during "*resource" phases by default behavior.  it prepares the resources
+                  dir.  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-resources-plugin</artifactId>
+        <version>2.6</version>
+        <configuration>
+          <skip>true</skip>
+        </configuration>
+      </plugin>
+
+      <!-- maven-compiler-plugin is called during "compile" phases by default behavior.  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-compiler-plugin</artifactId>
+        <version>3.1</version>
+        <configuration>
+          <skip>true</skip>
+        </configuration>
+      </plugin>
+
+      <!-- maven-jar-plugin is called during "compile" phase by default behavior.  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-jar-plugin</artifactId>
+        <version>2.4</version>
+        <executions>
+          <execution>
+            <id>default-jar</id>
+            <phase/>
+          </execution>
+        </executions>
+      </plugin>
+
+      <!-- maven-install-plugin is called during "install" phase by default behavior.  it tries to copy stuff under 
+                  target dir to ~/.m2.  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-install-plugin</artifactId>
+        <version>2.4</version>
+        <configuration>
+          <skip>true</skip>
+        </configuration>
+      </plugin>
+
+      <!-- maven-surefire-plugin is called during "test" phase by default behavior.  it triggers junit test.
+                  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-surefire-plugin</artifactId>
+        <version>2.12.4</version>
+        <configuration>
+          <skipTests>true</skipTests>
+        </configuration>
+      </plugin>
+
+
+      <!-- now we configure custom action (calling a script) at various lifecycle phases -->
+      <plugin>
+        <groupId>org.codehaus.mojo</groupId>
+        <artifactId>exec-maven-plugin</artifactId>
+        <version>1.2.1</version>
+        <executions>
+          <execution>
+            <id>clean phase script</id>
+            <phase>clean</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>${session.executionRootDirectory}/mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>clean</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>generate-sources script</id>
+            <phase>generate-sources</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>generate-sources</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>compile script</id>
+            <phase>compile</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>compile</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>package script</id>
+            <phase>package</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>package</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>test script</id>
+            <phase>test</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>test</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>install script</id>
+            <phase>install</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>install</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>deploy script</id>
+            <phase>deploy</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>deploy</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+        </executions>
+      </plugin>
+    </plugins>
+  </build>
+</project>
diff --git a/src/dcae_snmptrapd.py b/src/dcae_snmptrapd.py
new file mode 100644
index 0000000..8821d49
--- /dev/null
+++ b/src/dcae_snmptrapd.py
@@ -0,0 +1,837 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.dcae
+# ================================================================================
+# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+import argparse
+from array import *
+import asyncio 
+from collections import Counter
+import datetime
+import json 
+import logging
+import logging.handlers
+from optparse import OptionParser
+import os
+import pprint
+from pysnmp.entity import engine, config
+from pysnmp.carrier.asyncio.dgram import udp
+# from pysnmp.carrier.asyncore.dgram import udp
+from pysnmp.entity.rfc3413 import ntfrcv
+from pysnmp.proto.api import v2c
+import requests
+import sys
+import signal
+import string
+import socket
+import time
+import traceback
+import unicodedata
+import uuid as uuid_mod
+import yaml
+
+prog_name=os.path.basename(__file__)
+
+traps_in_second = 0
+last_epoch_second = 0
+
+ueb_partition = ""
+
+# <yaml config file values>
+# yc_ -> "yaml config_" -if you see this prefix, it came from conf file
+#    protocol
+yc_transport = ""
+yc_interface = ""
+yc_port = 162
+yc_dns_cache_ttl_seconds = 0
+
+#    files
+yc_runtime_base_dir = ""
+yc_log_dir = ""
+yc_data_dir = ""
+yc_pid_dir = ""
+yc_dcae_snmptrapd_diag = ""
+yc_raw_traps_log = ""
+yc_published_traps_dir = ""
+yc_trap_stats_log = ""
+yc_perm_status_file = ""
+
+#    ueb
+yc_dmaap_conf = ""
+yc_http_timeout = 5.0
+yc_primary_publisher = ""
+yc_peer_publisher = ""
+yc_max_traps_between_publish = 0 # max number of traps to batch before publishing
+yc_max_milliseconds_between_publish = 0 # max number of seconds between publishing
+# </yaml config file values>
+
+# <dmaap.conf>
+dmaap_url = ""
+dmaap_user_name = ""
+dmaap_p_var = ""
+dmaap_stream_id = ""
+# </dmaap.conf>
+
+# Requests session object (ueb and dmaap).
+dmaap_request_session = ""
+http_headers = {"Content-type": "application/json"}
+
+# FIXME: temp resource for UEB publishes
+ueb_url = ""
+
+# <DNS cache>
+#
+#     dns_cache_ip_to_name
+#        key [ip address] -> fqdn
+#     dns_cache_ip_expires 
+#        key [ip address] -> epoch this entry expires at
+dns_cache_ip_to_name = {}
+dns_cache_ip_expires = {}
+# </DNS cache>
+
+# logging
+dcae_logger = logging.getLogger('dcae_logger')
+handler = ""
+
+# # # # # # # # # # # # # # # # # # #
+# fx: setup dcae_logger custom logger
+# # # # # # # # # # ## # # # # # # #
+def setup_dcae_logger():
+    """
+    Setup custom logger for dcae_snmptrapd that incorporates 
+    a rotating file handler with 10 backups of diagnostic
+    log file.
+    :Parameters:
+       none
+    :Exceptions:
+       none
+    :Keywords:
+       logging
+    """
+
+    global dcae_logger, verbose
+    global handler
+
+    date_fmt = '%m/%d/%Y %H:%M:%S'
+
+    yc_dcae_snmptrapd_diag_bak = "%s.bak" % (yc_dcae_snmptrapd_diag)
+    if os.path.isfile(yc_dcae_snmptrapd_diag):
+        os.rename(yc_dcae_snmptrapd_diag, yc_dcae_snmptrapd_diag_bak)
+
+    handler = logging.handlers.RotatingFileHandler(yc_dcae_snmptrapd_diag, maxBytes=60000000, backupCount=10)
+
+    # set logLevel - valid values NOTSET, DEBUG, INFO, WARNING, ERROR, CRITICAL
+    handler.setLevel(logging.DEBUG)
+    dcae_logger.setLevel(logging.DEBUG)
+
+    log_fmt = '%(levelname)s|%(asctime)s|%(name)s|%(process)d|%(funcName)s|'\
+              '%(message)s'
+    formatter = logging.Formatter(log_fmt)
+    handler.setFormatter(formatter)
+    dcae_logger.addHandler(handler)
+
+    if os.path.isfile(yc_dcae_snmptrapd_diag):
+        os.chmod(yc_dcae_snmptrapd_diag, 0o640)
+
+    if os.path.isfile(yc_dcae_snmptrapd_diag_bak):
+        os.chmod(yc_dcae_snmptrapd_diag_bak, 0o640)
+
+ 
+# # # # # # # # # # # # #
+# fx: save_pid - save PID of running process
+# # # # # # # # # # # # #
+def save_pid(loc_pid_file_name):
+    """
+    Save the current process ID in a file for external 
+    access.
+    :Parameters:
+      loc_pid_file_name
+        filename including full path to write current process ID to 
+    :Exceptions:
+      file open
+        this function will throw an exception if unable to open loc_pid_file_name 
+    :Keywords:
+      pid /var/run
+    """
+
+    try:
+        pid_fd = open(loc_pid_file_name, 'w')
+        pid_fd.write('%d' % os.getpid())
+        pid_fd.close()
+    except:
+        print("Error saving PID file %s :" % loc_pid_file_name)
+    else:
+        print("PID file %s" % loc_pid_file_name)
+
+ 
+# # # # # # # # # # # # #
+# fx: rm_pid - remove PID of running process
+# # # # # # # # # # # # #
+def rm_pid(loc_pid_file_name):
+    """
+    Remove the current process ID file before exiting.
+    :Parameters:
+      loc_pid_file_name
+        filename that contains current process ID to be removed
+    :Exceptions:
+      file open
+        this function will throw an exception if unable to find or remove 
+        loc_pid_file_name 
+    :Keywords:
+      pid /var/run
+    """
+
+    try:
+        if os.path.isfile(loc_pid_file_name):
+            os.remove(loc_pid_file_name)
+    except:
+        print("Error removing PID file %s" % loc_pid_file_name)
+
+# # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
+# function: get_yaml_cfg
+# # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
+def get_yaml_cfg(loc_yaml_conf_file):
+    """
+    Load all sorts of goodies from yaml config file.
+    :Parameters:
+      loc_yaml_conf_file
+        filename including full path to yaml config file
+    :Exceptions:
+      file open
+        this function will throw an exception if unable to open
+        loc_yaml_conf_file (fatal error) or any of the required
+        values are not found in the loc_yaml_conf_file (fatal error)
+    :Keywords:
+      yaml config runtime protocol files ueb
+    :Variables:
+      yc_transport 
+        protocol transport for snmp traps (udp|tcp)
+      yc_interface 
+        what interface to listen for traps on
+      yc_port
+        what port to listen for traps on
+      yc_dns_cache_ttl_seconds
+        how many seconds an entry remains in DNS cache prior to refresh
+      yc_runtime_base_dir 
+        base directory of dcae_snmptrapd application
+      yc_log_dir 
+        log directory of dcae_snmptrapd application
+      yc_data_dir 
+        data directory of dcae_snmptrapd application
+      yc_pid_dir 
+        directory where running PID file will be written (filename <yc_pid_dir>/<prog_name>.pid)
+      yc_dcae_snmptrapd_diag 
+        program diagnostic log, auto rotated and archived via python handler
+      yc_raw_traps_log
+        file to write raw trap data to
+      yc_published_traps_dir
+        file to write json formatted trap data for successful publishes (only!)
+      yc_trap_stats_log
+        file to write trap stats (traps per second, by OID, by agent)
+      yc_perm_status_file 
+        file to write trap stats (traps per second, by OID, by agent)
+      yc_dmaap_conf
+        file (full path) of yaml config entries referenced at runtime, passed as 
+        runtime command argument "-c <yc_dmaap_conf>
+      yc_http_timeout
+        http timeout in seconds for dmaap publish attempt
+      yc_primary_publisher
+        boolean defining whether local instance is primary (future use)
+      yc_peer_publisher
+        identity of peer publisher in case this one fails (future use)
+      yc_max_traps_between_publish
+        if batching publishes, max number of traps to queue before http post
+      yc_max_milliseconds_between_publish
+        if batching publishes, max number of milliseconds between http post
+        Note:  using the batch feature creates an opportunity for trap loss if 
+        traps stop arriving and the process exits (traps in queue will remain
+        there until another trap arrives and kicks of the evaluation of max_traps
+        or max_milliseconds above).
+    """
+
+    global yc_transport, yc_port, yc_interface, yc_dns_cache_ttl_seconds, yc_runtime_base_dir, yc_log_dir, yc_data_dir, yc_pid_dir, yc_dcae_snmptrapd_diag, yc_raw_traps_log, yc_published_traps_dir, yc_trap_stats_log, yc_perm_status_file, yc_dmaap_conf, yc_http_timeout, yc_primary_publisher, yc_peer_publisher, yc_max_traps_between_publish, yc_max_milliseconds_between_publish
+
+    with open(loc_yaml_conf_file, 'r') as yaml_fd:
+        cfg_data = yaml.load(yaml_fd)
+
+    # ONAP FIXME: split try into per-section except loops below
+    try:
+        # protocol
+        yc_transport = (cfg_data['protocol']['transport'])
+        yc_interface = (cfg_data['protocol']['interface'])
+        yc_port = int(cfg_data['protocol']['port'])
+        yc_dns_cache_ttl_seconds = int(cfg_data['protocol']['dns_cache_ttl_seconds'])
+
+        # files and directories
+        yc_runtime_base_dir = (cfg_data['files']['runtime_base_dir'])
+        yc_log_dir = (cfg_data['files']['log_dir'])
+        yc_data_dir = (cfg_data['files']['data_dir'])
+        yc_pid_dir = (cfg_data['files']['pid_dir'])
+        yc_dcae_snmptrapd_diag = (cfg_data['files']['dcae_snmptrapd_diag'])
+        yc_raw_traps_log =(cfg_data['files']['raw_traps_log'])
+        yc_published_traps_dir =(cfg_data['files']['published_traps_dir'])
+        yc_trap_stats_log =(cfg_data['files']['trap_stats_log'])
+        yc_perm_status_file = (cfg_data['files']['perm_status_file'])
+
+        # ueb
+        yc_dmaap_conf = (cfg_data['ueb']['dmaap_conf'])
+        yc_http_timeout = (cfg_data['ueb']['http_timeout'])
+        yc_primary_publisher = (cfg_data['ueb']['primary_publisher'])
+        yc_peer_publisher = (cfg_data['ueb']['peer_publisher'])
+        yc_max_traps_between_publish = (cfg_data['ueb']['max_traps_between_publish'])
+        yc_max_milliseconds_between_publish = (cfg_data['ueb']['max_milliseconds_between_publish'])
+
+    except:
+        print("ERROR reading config %s" % loc_yaml_conf_file)
+        raise
+        cleanup_and_exit(1)
+
+    # print back for confirmation
+    print("Read config: %s" % loc_yaml_conf_file)
+    print("    protocol section:")
+    print("        transport: %s" % yc_transport)
+    print("        interface: %s" % yc_interface)
+    print("        port: %s" % yc_port)
+    print("        dns_cache_ttl_seconds: %s" % yc_dns_cache_ttl_seconds)
+    print("    files section:")
+    print("        runtime_base_dir: %s" % yc_runtime_base_dir)
+    print("        log_dir: %s" % yc_log_dir)
+    print("        data_dir: %s" % yc_data_dir)
+    print("        pid_dir: %s" % yc_pid_dir)
+    print("        dcae_snmptrapd_diag: %s" % yc_dcae_snmptrapd_diag)
+    print("        raw_traps_log: %s" % yc_raw_traps_log)
+    print("        published_traps_dir: %s" % yc_published_traps_dir)
+    print("        trap_stats_log: %s" % yc_trap_stats_log)
+    print("        perm_status_file: %s" % yc_perm_status_file)
+    print("    ueb section:")
+    print("        dmaap_config_file: %s" % yc_dmaap_conf)
+    print("        http_timeout: %s" % yc_http_timeout)
+    print("        primary_publisher: %s" % yc_primary_publisher)
+    print("        peer_publisher: %s" % yc_peer_publisher)
+    print("        max_traps_between_publish: %s" % yc_max_traps_between_publish)
+    print("        max_milliseconds_between_publish: %s" % yc_max_milliseconds_between_publish)
+
+# # # # # # # # # # #
+# fx: get_dmaap_cfg
+# # # # # # # # # # #
+def get_dmaap_cfg():
+    """
+    Load dmaap config /etc/dcae/dmaap.conf file (legacy controller)
+    :Parameters:
+      none
+    :Exceptions:
+      file open
+        this function will throw an exception if unable to open
+        yc_dmaap_conf(fatal error) 
+    :Keywords:
+      legacy controller dmaap.conf
+    :Variables:
+      yc_dmaap_conf
+        full path filename of dmaap_conf file provided by previous
+        generation controller
+    """
+
+    global dmaap_url, dmaap_user_name, dmaap_p_var, dmaap_stream_id
+
+    if os.path.isfile(yc_dmaap_conf):
+        dcae_logger.debug ('Reading DMaaP config file %s ' %
+                          yc_dmaap_conf)
+    else:
+        dcae_logger.error ('DMaaP config file %s does NOT exist - exiting'
+                         % (yc_dmaap_conf))
+        cleanup_and_exit(1)
+
+    with open(yc_dmaap_conf) as dmaap_config_fd:
+        dmaapCfgData = json.load(dmaap_config_fd)
+
+    try:
+        dmaap_url = dmaapCfgData [0]["dmaapUrl"]
+        dmaap_user_name = dmaapCfgData [0]["dmaapUserName"]
+        dmaap_p_var = dmaapCfgData [0]["dmaapPassword"]
+        dmaap_stream_id = dmaapCfgData [0]["dmaapStreamId"]
+    except:
+        dcae_logger.error ('DMaaP config file %s has missing data - exiting'
+                         % (yc_dmaap_conf))
+        cleanup_and_exit(1)
+
+    dcae_logger.debug('dmaap_url: %s' % (dmaap_url))
+    dcae_logger.debug('dmaap_user_name: %s' % (dmaap_user_name))
+    dcae_logger.debug('dmaap_p_var: -')
+    dcae_logger.debug('dmaap_stream_id: %s' % (dmaap_stream_id))
+
+    dmaap_config_fd.close()
+
+# # # # # # # # # # # # #
+# fx: init_session_obj
+# # # # # # # # # # # # #
+def init_session_obj():
+    """
+    Initializes and returns a http request session object for later use
+    :Parameters:
+      none
+    :Exceptions:
+      session object creation
+        this function will throw an exception if unable to create
+        a new session object
+    :Keywords:
+      http request session
+    :Variables:
+      none
+    """
+
+    try:
+       s = requests.Session()
+       dcae_logger.debug("New requests session has been initialized")
+    except:
+       dcae_logger.error("Failed to create new requests session")
+
+    return s
+
+
+# # # # # # # # # # # # # # # # # # #
+# fx: load_cfg
+# # # # # # # # # # ## # # # # # # #
+def load_cfg(_signum, _frame):
+    """
+    Calls individual functions to read various config files required.  This
+    function is called directly (e.g. at startup) and is also registered
+    with signal handling (e.g. kill -sigusr1 <pid>)
+    
+    :Parameters:
+      signum and frame (only present when called via signal to running process)
+    :Exceptions:
+      none
+    :Keywords:
+      config files
+    :Variables:
+      yaml_conf_file
+      dmaap_request_session
+    """
+
+    global dmaap_request_session
+
+    if int(_signum) != 0:
+        print("%s Received signal %s at frame %s; re-reading config file"
+                       % (prog_name, _signum, _frame))
+    else:
+        print("Reading config files")
+
+    # always get yaml config values
+    get_yaml_cfg(yaml_conf_file)
+
+    # Initialize dmaap requests session object. Close existing session
+    # if applicable.
+    get_dmaap_cfg()
+    if dmaap_request_session:
+        dmaap_request_session.close()
+    dmaap_request_session = init_session_obj()
+    # dcae_logger.debug("dmaap_request_session: %s" % dmaap_request_session)
+
+
+# # # # # # # # # # # # # # # # # # #
+# fx: post_ueb
+#     temporarily publish to UEB to validate json format
+# # # # # # # # # # # # # # # # # # #
+def post_ueb(loc_json_msg):
+    """
+    This function is only present for lab testing, to allow easier unit tests
+    vs. depend on (a) legacy controller or (b) next gen controller existence
+    :Parameters:
+      loc_json_msg
+        json string of trap attributes to publish
+    :Exceptions:
+      none
+    :Keywords:
+      UEB non-AAF legacy http post
+    :Variables:
+    """
+
+    global dmaap_request_session
+
+    post_data_enclosed = '[' + loc_json_msg + ']'
+
+    try:
+        http_resp = dmaap_request_session.post(ueb_url, headers=http_headers, data=post_data_enclosed,
+                            timeout=7)
+        dcae_logger.debug("Response from %s: %s dmaap_request_sesson: %s" % (ueb_url, http_resp.status_code, dmaap_request_session))
+        if http_resp.status_code == requests.codes.ok :
+            dcae_logger.debug("trap published successfully")
+        else:
+            dcae_logger.debug("DMAAP returned non-normal response - ERROR")
+    except:
+        dcae_logger.debug("Response from %s on topic %s: %s dmaap_request_session: %s")
+
+# # # # # # # # # # # # #
+# fx: post_dmaap
+# # # # # # # # # # # # #
+def post_dmaap(topic, post_topics_idx, loc_num_traps_to_publish_in_topic):
+
+    global http_resp, dmaap_url, dmaap_user_name, post_data_by_topics, drs, \
+           last_pub_time
+
+    post_data_enclosed = '[' + post_data_by_topics[post_topics_idx] + ']'
+
+    # This is for logging purposes only.
+    dmaap_host = dmaap_url.split('/')[2][:-5]
+
+    k = 0
+    dmaap_pub_success = False
+
+    while not dmaap_pub_success and k < num_pub_attempts:
+        try:
+            dcae_logger.debug("Attempt %d to %s, %d traps in msg, dmaap_url: "
+                            "%s dmaap_user_name: %s post_data: %s"
+                            % (k, dmaap_host,
+                               loc_num_traps_to_publish_in_topic, dmaap_url,
+                               dmaap_user_name,
+                               post_data_enclosed))
+
+            # below disable_warnings required until python updated:
+            #       https://github.com/shazow/urllib3/issues/497
+            requests.packages.urllib3.disable_warnings()
+
+            http_resp = drs.post(dmaap_url, post_data_enclosed,
+                                     auth=(dmaap_user_name, dmaap_p_var),
+                                     headers=http_headers,
+                                     timeout=ueb_http_timeout)
+            dcae_logger.debug("Response from %s on topic %s: %s drs: %s"
+                            % (dmaap_host, topic, http_resp.status_code, drs))
+            if http_resp.status_code == requests.codes.ok:
+                dcae_logger.debug("%d traps published"
+                                % loc_num_traps_to_publish_in_topic)
+                log_published_messages("DMAAP", topic, post_data_enclosed)
+                last_pub_time = time.time()
+                dmaap_pub_success = True
+            else:
+                dcae_logger.debug("Response (non-200) detail from %s on topic "
+                                "%s: %s" % (dmaap_host, topic, http_resp.text))
+
+        except requests.exceptions.RequestException as e:
+            dcae_logger.error("Exception while posting to %s topic %s: -->%s<--"
+                           % (dmaap_host, topic, e))
+
+        k += 1
+
+        # No point in waiting just to log "ALL publish attempts failed" msg
+        if k < num_pub_attempts:
+            time.sleep(sleep_between_retries)
+        else:
+            break
+
+    if not dmaap_pub_success:
+        uuid = uuid_mod.uuid1()
+        dcae_logger.error("ALL publish attempts failed to DMAAP server: %s, "
+                        "topic: %s, %d trap(s) not published, message: %s"
+                        % (dmaap_host, topic, loc_num_traps_to_publish_in_topic,
+                           post_data_by_topics[post_topics_idx]))
+
+        # Set epoch_serno range for topic
+        ret_list = set_topic_serno_range(topic)
+        fes = ret_list[0]
+        les = ret_list[1]
+
+        perm_msg = "CRITICAL: [%s] ALL publish attempts failed to DMAPP server: "\
+                   "%s, topic: %s, %d trap(s) not published in epoch_serno "\
+                   "range: %d - %d\n" \
+                   % (uuid, dmaap_host, topic, loc_num_traps_to_publish_in_topic,
+                      fes, les)
+
+        dcae_logger.error("SEND-TO-PERM-STATUS: %s" % perm_msg)
+        log_to_perm_status(perm_msg)
+
+
+# # # # # # # # # # # # # # # # # # #
+# fx: trap_observer
+#     callback for when trap is received
+# # # # # # # # # # # # # # # # # # #
+def trap_observer(snmp_engine, execpoint, variables, cbCtx):
+    """
+    Decompose trap attributes and load in dictionary which is later used to 
+    create json string for publishing to dmaap. 
+    :Parameters:
+      snmp_engine
+         snmp engine created to listen for arriving traps
+      execpoint
+         point in code that trap_observer was invoked
+      variables
+         trap attributes
+      cbCtx
+         callback context
+    :Exceptions:
+      none
+    :Keywords:
+      UEB non-AAF legacy http post
+    :Variables:
+    """
+
+    global trap_dict, last_epoch_second, traps_in_epoch
+
+    # empty dictionary on new trap
+    trap_dict = {}
+
+    # assign uuid to trap
+    trap_dict["uuid"] = str(uuid_mod.uuid1())
+
+    # ip and hostname
+    ip_addr_str = str(variables['transportAddress'][0])
+    trap_dict["agent address"] = ip_addr_str
+    try:
+       if int(dns_cache_ip_expires[ip_addr_str] < int(time.time())):
+           dcae_logger.debug ('dns cache expired for %s' % ip_addr_str)
+           raise Exception('cache expired for %s at %d - updating value' % (ip_addr_str, (dns_cache_ip_expires[ip_addr_str])))
+       else:
+           trap_dict["agent name"] = dns_cache_ip_to_name[ip_addr_str]
+    except:
+        dcae_logger.debug ('dns cache expired or missing for %s - reloading' % ip_addr_str)
+        host_addr_info = socket.gethostbyaddr(ip_addr_str)
+        agent_fqdn = str(host_addr_info[0])
+        trap_dict["agent name"] = agent_fqdn
+
+        dns_cache_ip_to_name[ip_addr_str] = agent_fqdn
+        dns_cache_ip_expires[ip_addr_str] = (time.time() + yc_dns_cache_ttl_seconds)
+        dcae_logger.debug ('cache for %s (%s) updated - set to expire at %d' % (agent_fqdn, ip_addr_str, dns_cache_ip_expires[ip_addr_str]))
+
+        dns_cache_ip_to_name[str(trap_dict["agent address"])]
+
+    trap_dict["cambria.partition"] = str(trap_dict["agent name"])
+    trap_dict["community"] = ""    # do not include cleartext community in pub
+    trap_dict["community len"] = 0    # do not include cleartext community in pub
+
+    # FIXME.CHECK_WITH_DOWNSTREAM_CONSUMERS: get rid of round for millisecond val
+    # epoch_second = int(round(time.time()))
+    epoch_msecond = time.time()
+    epoch_second = int(round(epoch_msecond))
+    if epoch_second == last_epoch_second:
+        traps_in_epoch +=1
+    else:
+        traps_in_epoch = 0
+    last_epoch_second = epoch_second
+    traps_in_epoch_04d = format(traps_in_epoch, '04d')
+    # FIXME: get rid of exponential formatted output
+    trap_dict['epoch_serno'] = (epoch_second * 10000) + traps_in_epoch
+    # FIXME.PERFORMANCE: faster to use strings?
+    # trap_dict['epoch_serno'] = (str(epoch_second) + str(traps_in_epoch_04d))
+    
+    snmp_version = variables['securityModel']
+    if snmp_version == 1:
+        trap_dict["protocol version"] = "v1"
+    else:
+        if snmp_version == 2:
+            trap_dict["protocol version"] = "v2c"
+        else:
+            if snmp_version == 3:
+                trap_dict["protocol version"] = "v3"
+            else:
+                trap_dict["protocol version"] = "unknown"
+
+    if snmp_version == 3:
+       trap_dict["protocol version"] = "v3"
+       trap_dict["security level"] = str(variables['securityLevel'])
+       trap_dict["context name"] = str(variables['contextName'].prettyPrint())
+       trap_dict["security name"] = str(variables['securityName'])
+       trap_dict["security engine"] = str(variables['contextEngineId'].prettyPrint())
+    trap_dict['time received'] = epoch_msecond
+    trap_dict['trap category'] = "DCAE-COLLECTOR-UCSNMP" # get this from dmaap_url when ready
+
+# Callback function for receiving notifications
+# noinspection PyUnusedLocal,PyUnusedLocal,PyUnusedLocal
+def cbFun(snmp_engine, stateReference, contextEngineId, contextName,
+          varBinds, cbCtx):
+    """
+    Callback executed when trap arrives
+    :Parameters:
+      snmp_engine
+        snmp engine created to listen for arriving traps
+      stateReference
+      contextEngineId
+      contextName
+      varBinds
+        trap varbinds
+      cbCtx
+        callback context
+    :Exceptions:
+      none
+    :Keywords:
+      callback trap arrival
+    :Variables:
+    """
+
+
+    global trap_dict
+
+    print('CB for notification from ContextEngineId "%s", ContextName "%s"' % (contextEngineId.prettyPrint(),
+                                                                        contextName.prettyPrint()))
+    # FIXME:  add conversion from v1 to v2 prior to below? or special handling for v1?
+    # print('entering cbFun, trap_dict is: %s' % (json.dumps(trap_dict)))
+
+    vb_dict = {}
+
+    vb_idx=0;
+    k1=""
+    k2=""
+
+    # FIXME: Note that the vb type is present, just need to extract it efficiently somehow
+    # print('\nvarBinds ==> %s' % (varBinds))
+    #
+    # varBinds ==> [(ObjectName('1.3.6.1.2.1.1.3.0'), TimeTicks(1243175676)), 
+    #               (ObjectName('1.3.6.1.6.3.1.1.4.1.0'), ObjectIdentifier('1.3.6.1.4.1.74.2.46.12.1.1')), 
+    #               (ObjectName('1.3.6.1.4.1.74.2.46.12.1.1.1'), OctetString(b'ucsnmp heartbeat - ignore')), 
+    #               (ObjectName('1.3.6.1.4.1.74.2.46.12.1.1.2'), OctetString(b'Fri Aug 11 17:46:01 EDT 2017'))]
+    #
+    # This does NOT work:
+    # for name, typ, val in varBinds:
+    #     print('name = %s' % (name))
+    #     print('typ = %s' % (typ))
+    #     print('val = %s\n' % (val))
+
+    for name, val in varBinds:
+        if vb_idx == 0:
+            vb_sys_uptime_oid = name
+            vb_sys_uptime = val
+            # print('vb_sys_uptime = %s' % (vb_sys_uptime))
+        else:
+            if vb_idx == 1:
+                trap_dict["notify OID"] = str(val)
+                trap_dict["notify OID len"] = (trap_dict["notify OID"].count('.') + 1)
+                # print('vb_notify_oid = %s' % (vb_notify_oid))
+            # else:
+                # vb_idx_02d = format((vb_idx - 2), '02d')
+        vb_idx_02d = format((vb_idx), '02d')
+
+        k1="varbind" + str(vb_idx_02d) + "_oid"
+        k2="varbind" + str(vb_idx_02d) + "_val"
+        vb_dict[k1] = name.prettyPrint()
+        vb_dict[k2] = val.prettyPrint()
+    
+        vb_idx += 1
+
+    # print('SNMP trap arrived: %s' % (pprint.pprint(json.dumps(trap_dict))))
+    trap_dict["num varbinds"] = vb_idx
+
+    # FIXME:  now add varbind dict to trap dict
+    trap_dict["varbinds"] = vb_dict
+
+    trap_json_msg = json.dumps(trap_dict)
+    print('SNMP trap arrived: %s' % trap_json_msg)
+
+    # FIXME: temporary pub to UEB for validating JSON
+    post_ueb(trap_json_msg)
+
+
+# # # # # # # # # # # # #
+# Main  MAIN  Main  MAIN
+# # # # # # # # # # # # #
+# parse command line args
+parser = argparse.ArgumentParser(description='Post SNMP traps ' \
+                                             'to DCAE DMaap MR')
+parser.add_argument('-c', action="store", dest="yaml_conf_file", type=str,
+                    help="yaml config file name")
+parser.add_argument('-u', action="store", dest="ueb_url", type=str,
+                    help="ueb url for testing purposes ONLY")
+parser.add_argument('-v', action="store_true", dest="verbose",
+                    help="verbose logging")
+
+# set vars from args
+parser.set_defaults(yaml_conf_file = "")
+
+# parse args
+args = parser.parse_args()
+
+# set vars from args
+yaml_conf_file = args.yaml_conf_file
+ueb_url = args.ueb_url
+verbose = args.verbose
+
+# Get non-ENV settings from config file; spoof 2 params
+# so same fx can be used for signal handling
+if yaml_conf_file == "":
+   usage_err
+else:
+   load_cfg('0', '0')
+
+# save current PID for future/external reference
+pid_file_name = '%s/%s.pid' % (yc_pid_dir, prog_name)
+save_pid(pid_file_name)
+
+# setup custom logger
+setup_dcae_logger()
+
+# bump up logging level if overridden at command line
+if verbose:
+    dcae_logger.setLevel(logging.DEBUG)
+    handler.setLevel(logging.DEBUG)
+    dcae_logger.debug("log level increased to DEBUG")
+
+dcae_logger.info("log will include info level messages")
+dcae_logger.error("log will include error level messages")
+dcae_logger.debug("log will include debug level messages")
+
+# Get the event loop for this thread
+loop = asyncio.get_event_loop()
+
+# Create SNMP engine with autogenernated engineID and pre-bound
+# to socket transport dispatcher
+snmp_engine = engine.SnmpEngine()
+
+# # # # # # # # # # # #
+# Transport setup
+# # # # # # # # # # # #
+
+# UDP over IPv4, first listening interface/port
+config.addTransport(
+    snmp_engine,
+    udp.domainName + (1,),
+    udp.UdpTransport().openServerMode(('127.0.0.1', 6163))
+)
+
+# UDP over IPv4, second listening interface/port
+config.addTransport(
+    snmp_engine,
+    udp.domainName + (2,),
+    udp.UdpTransport().openServerMode(('127.0.0.1', 2162))
+)
+
+# # # # # # # # # # # #
+# SNMPv1/2c setup
+# # # # # # # # # # # #
+
+# SecurityName <-> CommunityName mapping
+config.addV1System(snmp_engine, 'my-area', 'public')
+
+# register trap_observer for message arrival
+snmp_engine.observer.registerObserver(
+    trap_observer,
+    'rfc3412.receiveMessage:request',
+    'rfc3412.returnResponsePdu'
+    # 'rfc2576.processIncomingMsg:writable'
+)
+
+# Register SNMP Application at the SNMP engine
+ntfrcv.NotificationReceiver(snmp_engine, cbFun)
+
+snmp_engine.transportDispatcher.jobStarted(1)  # this job would never finish
+
+# Run I/O dispatcher which would receive queries and send confirmations
+try:
+    snmp_engine.transportDispatcher.runDispatcher()
+except:
+    snmp_engine.observer.unregisterObserver()
+    snmp_engine.transportDispatcher.closeDispatcher()
+    rm_pid(pid_file_name)
diff --git a/src/dcae_snmptrapd.sh b/src/dcae_snmptrapd.sh
new file mode 100755
index 0000000..4e00efc
--- /dev/null
+++ b/src/dcae_snmptrapd.sh
@@ -0,0 +1,24 @@
+#!/usr/bin/env bash
+/*
+* ============LICENSE_START=======================================================
+* org.onap.dcae
+* ================================================================================
+* Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+* ================================================================================
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+* 
+*      http://www.apache.org/licenses/LICENSE-2.0
+* 
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+* ============LICENSE_END=========================================================
+*
+* ECOMP is a trademark and service mark of AT&T Intellectual Property.
+*/
+
+python dcae_snmptrapd.py -c ../etc/dcae_snmptrapd.yaml