CSIT setup in NCMP-DMI-PLUGIN Repo

- Infrastructure code for ncmp-dmi CSITs.
- Enhanced timeout message for sdnc during setup.
- Basic CSITs for dmi health and get modules from SDNC.
- Fixed shell script permissions from 100644 to 100755.
- Fixing .gitignore as it was ignoring *.zip format and we need key0.zip
  as part of SDNC CSIT setup.

Issue-ID: CPS-930
Change-Id: I39054e3ec2c9281821ca146831ae6cc82d674924
Signed-off-by: mpriyank <priyank.maheshwari@est.tech>

1 files changed, 141 insertions, 0 deletions

diff --git a/csit/plans/dmi/setup.sh b/csit/plans/dmi/setup.sh
new file mode 100755
index 00000000..9a6d27bc
--- /dev/null
+++ b/csit/plans/dmi/setup.sh
@@ -0,0 +1,141 @@
+#!/bin/bash
+#
+# Copyright (C) 2022 Nordix Foundation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# Branched from ccsdk/distribution to this repository Feb 23, 2021
+#
+
+check_health()
+{
+  TIME_OUT=120
+  INTERVAL=5
+  TICKER=0
+
+  while [ "$TICKER" -le "$TIME_OUT" ]; do
+
+    RESPONSE=$(curl --location --request GET 'http://'$1'/manage/health/readiness')
+
+    if [[ "$RESPONSE" == *"UP"* ]]; then
+      echo "$2 started in $TICKER"
+      break;
+    fi
+
+    sleep $INTERVAL
+    TICKER=$((TICKER + INTERVAL))
+
+  done
+
+  if [ "$TICKER" -ge "$TIME_OUT" ]; then
+    echo TIME OUT: $2 session not started in $TIME_OUT seconds... Could cause problems for testing activities...
+  fi
+}
+
+###################### setup env ############################
+# Set env variables for docker compose
+export LOCAL_IP=$(ip -4 addr show docker0 | grep -Po 'inet \K[\d.]+')
+
+source $WORKSPACE/plans/dmi/test.properties
+export $(cut -d= -f1 $WORKSPACE/plans/dmi/test.properties)
+
+###################### setup ncmp-dmi-plugin ############################
+mkdir -p $WORKSPACE/archives/ncmp-dmi-plugin
+cp $WORKSPACE/../docker-compose/*.yml $WORKSPACE/archives/ncmp-dmi-plugin
+cd $WORKSPACE/archives/ncmp-dmi-plugin
+
+# download docker-compose of a required version (1.25.0 supports configuration of version 3.7)
+curl -L https://github.com/docker/compose/releases/download/1.25.0/docker-compose-`uname -s`-`uname -m` > docker-compose
+chmod +x docker-compose
+
+# start CPS and PostgreSQL containers with docker compose
+./docker-compose up -d
+
+####################### setup cps-ncmp ############################
+
+cd $WORKSPACE/archives
+git clone "https://gerrit.onap.org/r/cps"
+mkdir -p $WORKSPACE/archives/dc-cps-ncmp
+cat $WORKSPACE/archives/cps/docker-compose/docker-compose.yml
+cp $WORKSPACE/archives/cps/docker-compose/*.yml $WORKSPACE/archives/dc-cps-ncmp
+cd $WORKSPACE/archives/dc-cps-ncmp
+# copy docker-compose (downloaded already for cps)
+cp $WORKSPACE/archives/ncmp-dmi-plugin/docker-compose .
+chmod +x docker-compose
+./docker-compose up -d
+
+###################### setup sdnc #######################################
+source $WORKSPACE/plans/dmi/sdnc/sdnc_setup.sh
+
+###################### setup pnfsim #####################################
+docker-compose -f $WORKSPACE/plans/dmi/pnfsim/docker-compose.yml up -d
+
+# Allow time for netconf-pnp-simulator & SDNC to come up fully
+sleep 30s
+
+###################### mount pnf-sim as PNFDemo ##########################
+SDNC_TIME_OUT=250
+SDNC_INTERVAL=10
+SDNC_TIME=0
+
+while [ "$SDNC_TIME" -le "$SDNC_TIME_OUT" ]; do
+
+  # Mount netconf node
+  curl --location --request PUT 'http://'$SDNC_HOST:$SDNC_PORT'/restconf/config/network-topology:network-topology/topology/topology-netconf/node/PNFDemo' \
+  --header 'Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==' \
+  --header 'Content-Type: application/json' \
+  --data-raw '{
+    "node": [
+    {
+      "node-id": "PNFDemo",
+      "netconf-node-topology:protocol": {
+      "name": "TLS"
+      },
+      "netconf-node-topology:host": "'$LOCAL_IP'",
+      "netconf-node-topology:key-based": {
+      "username": "netconf",
+      "key-id": "ODL_private_key_0"
+      },
+      "netconf-node-topology:port": 6512,
+      "netconf-node-topology:tcp-only": false,
+      "netconf-node-topology:max-connection-attempts": 5
+    }
+    ]
+  }'
+
+   # Verify node has been mounted
+
+  RESPONSE=$( curl --location --request GET 'http://'$SDNC_HOST:$SDNC_PORT'/restconf/config/network-topology:network-topology/topology/topology-netconf' --header 'Authorization: basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==')
+
+  if [[ "$RESPONSE" == *"PNFDemo"* ]]; then
+    echo "Node mounted in $SDNC_TIME"
+    break;
+  fi
+
+  sleep $SDNC_INTERVAL
+  SDNC_TIME=$((SDNC_TIME + SDNC_INTERVAL))
+
+done
+
+####################### verify ncmp-cps health ##########################
+#
+check_health $CPS_CORE_HOST:$CPS_CORE_MANAGEMENT_PORT 'cps-ncmp'
+
+###################### verify dmi health ##########################
+
+check_health $DMI_HOST:$DMI_MANAGEMENT_PORT 'dmi-plugin'
+
+###################### ROBOT Configurations ##########################
+# Pass variables required for Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v CPS_CORE_HOST:$CPS_CORE_HOST -v CPS_CORE_PORT:$CPS_CORE_PORT -v DMI_HOST:$LOCAL_IP -v DMI_PORT:$DMI_PORT -v DMI_MANAGEMENT_PORT:$DMI_MANAGEMENT_PORT -v CPS_CORE_MANAGEMENT_PORT:$CPS_CORE_MANAGEMENT_PORT -v SDNC_HOST:$SDNC_HOST -v SDNC_PORT:$SDNC_PORT -v DATADIR:$WORKSPACE/data --exitonfailure"
\ No newline at end of file