Merge "Move mount node after cps test during CSITs"

6 files changed, 161 insertions, 111 deletions

diff --git a/csit/plans/cps/sdnc/check_sdnc_mount_node.sh b/csit/plans/cps/sdnc/check_sdnc_mount_node.sh
new file mode 100644
index 0000000000..9ea6670769
--- /dev/null
+++ b/csit/plans/cps/sdnc/check_sdnc_mount_node.sh
@@ -0,0 +1,82 @@
+# ============LICENSE_START=======================================================
+# Copyright (C) 2023 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+# WAIT 10 minutes maximum and test every 30 seconds if SDNC is up using HealthCheck API
+TIME_OUT=600
+INTERVAL=30
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://$SDNC_HOST:$SDNC_PORT/restconf/operations/SLI-API:healthcheck );
+  echo $response
+
+  if [ "$response" == "200" ]; then
+    echo SDNC started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: karaf session not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+###################### mount pnf-sim as PNFDemo ##########################
+SDNC_TIME_OUT=250
+SDNC_INTERVAL=10
+SDNC_TIME=0
+
+while [ "$SDNC_TIME" -le "$SDNC_TIME_OUT" ]; do
+
+  # Mount netconf node
+  curl --location --request PUT 'http://'$SDNC_HOST:$SDNC_PORT'/restconf/config/network-topology:network-topology/topology/topology-netconf/node/PNFDemo' \
+  --header 'Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==' \
+  --header 'Content-Type: application/json' \
+  --data-raw '{
+    "node": [
+    {
+      "node-id": "PNFDemo",
+      "netconf-node-topology:protocol": {
+      "name": "TLS"
+      },
+      "netconf-node-topology:host": "'$LOCAL_IP'",
+      "netconf-node-topology:key-based": {
+      "username": "netconf",
+      "key-id": "ODL_private_key_0"
+      },
+      "netconf-node-topology:port": 6512,
+      "netconf-node-topology:tcp-only": false,
+      "netconf-node-topology:max-connection-attempts": 5
+    }
+    ]
+  }'
+
+   # Verify node has been mounted
+
+  RESPONSE=$( curl --location --request GET 'http://'$SDNC_HOST:$SDNC_PORT'/restconf/config/network-topology:network-topology/topology/topology-netconf' --header 'Authorization: basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==')
+
+  if [[ "$RESPONSE" == *"PNFDemo"* ]]; then
+    echo "Node mounted in $SDNC_TIME"
+    sleep 10
+    break;
+  fi
+
+  sleep $SDNC_INTERVAL
+  SDNC_TIME=$((SDNC_TIME + SDNC_INTERVAL))
+
+done
\ No newline at end of file
diff --git a/csit/plans/cps/sdnc/sdnc_setup.sh b/csit/plans/cps/sdnc/sdnc_setup.sh
index 9c17b836b0..61c61fc289 100644
--- a/csit/plans/cps/sdnc/sdnc_setup.sh
+++ b/csit/plans/cps/sdnc/sdnc_setup.sh
@@ -24,26 +24,4 @@
 export SDNC_CERT_PATH=$WORKSPACE/plans/cps/sdnc/certs
 
 #start SDNC containers with docker compose and configuration from docker-compose.yml
-docker-compose -f $WORKSPACE/plans/cps/sdnc/docker-compose.yml up -d
-
-# WAIT 10 minutes maximum and test every 30 seconds if SDNC is up using HealthCheck API
-TIME_OUT=600
-INTERVAL=30
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
-  response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://$SDNC_HOST:$SDNC_PORT/restconf/operations/SLI-API:healthcheck );
-  echo $response
-
-  if [ "$response" == "200" ]; then
-    echo SDNC started in $TIME seconds
-    break;
-  fi
-
-  echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
-  sleep $INTERVAL
-  TIME=$(($TIME+$INTERVAL))
-done
-
-if [ "$TIME" -ge "$TIME_OUT" ]; then
-   echo TIME OUT: karaf session not started in $TIME_OUT seconds... Could cause problems for testing activities...
-fi
\ No newline at end of file
+docker-compose -f $WORKSPACE/plans/cps/sdnc/docker-compose.yml up -d
\ No newline at end of file
diff --git a/csit/plans/cps/setup.sh b/csit/plans/cps/setup.sh
index c4e5c153d9..80829eba14 100755
--- a/csit/plans/cps/setup.sh
+++ b/csit/plans/cps/setup.sh
@@ -72,53 +72,6 @@ source $WORKSPACE/plans/cps/sdnc/sdnc_setup.sh
 ###################### setup pnfsim #####################################
 docker-compose -f $WORKSPACE/plans/cps/pnfsim/docker-compose.yml up -d
 
-# Allow time for netconf-pnp-simulator & SDNC to come up fully
-sleep 30s
-
-###################### mount pnf-sim as PNFDemo ##########################
-SDNC_TIME_OUT=250
-SDNC_INTERVAL=10
-SDNC_TIME=0
-
-while [ "$SDNC_TIME" -le "$SDNC_TIME_OUT" ]; do
-
-  # Mount netconf node
-  curl --location --request PUT 'http://'$SDNC_HOST:$SDNC_PORT'/restconf/config/network-topology:network-topology/topology/topology-netconf/node/PNFDemo' \
-  --header 'Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==' \
-  --header 'Content-Type: application/json' \
-  --data-raw '{
-    "node": [
-    {
-      "node-id": "PNFDemo",
-      "netconf-node-topology:protocol": {
-      "name": "TLS"
-      },
-      "netconf-node-topology:host": "'$LOCAL_IP'",
-      "netconf-node-topology:key-based": {
-      "username": "netconf",
-      "key-id": "ODL_private_key_0"
-      },
-      "netconf-node-topology:port": 6512,
-      "netconf-node-topology:tcp-only": false,
-      "netconf-node-topology:max-connection-attempts": 5
-    }
-    ]
-  }'
-
-   # Verify node has been mounted
-
-  RESPONSE=$( curl --location --request GET 'http://'$SDNC_HOST:$SDNC_PORT'/restconf/config/network-topology:network-topology/topology/topology-netconf' --header 'Authorization: basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==')
-
-  if [[ "$RESPONSE" == *"PNFDemo"* ]]; then
-    echo "Node mounted in $SDNC_TIME"
-    break;
-  fi
-
-  sleep $SDNC_INTERVAL
-  SDNC_TIME=$((SDNC_TIME + SDNC_INTERVAL))
-
-done
-
 ###################### verify ncmp-cps health ##########################
 
 check_health $CPS_CORE_HOST:$CPS_CORE_PORT 'cps-ncmp'
diff --git a/csit/plans/cps/testplanCps.txt b/csit/plans/cps/testplanCps.txt
new file mode 100644
index 0000000000..8b0ad08980
--- /dev/null
+++ b/csit/plans/cps/testplanCps.txt
@@ -0,0 +1,21 @@
+# ============LICENSE_START=======================================================
+# Copyright (C) 2023 Nordix Foundation
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+# Test suites are relative paths under csit/tests/.
+# Place the suites in run order.
+actuator
+cps-admin
+cps-data
\ No newline at end of file
diff --git a/csit/plans/cps/testplan.txt b/csit/plans/cps/testplanNcmp.txt
index 45e8381a1e..81c5468618 100644
--- a/csit/plans/cps/testplan.txt
+++ b/csit/plans/cps/testplanNcmp.txt
@@ -1,5 +1,5 @@
 # ============LICENSE_START=======================================================
-# Copyright (C) 2021-2023 Nordix Foundation
+# Copyright (C) 2023 Nordix Foundation
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -16,9 +16,6 @@
 
 # Test suites are relative paths under csit/tests/.
 # Place the suites in run order.
-actuator
-cps-admin
-cps-data
 cps-model-sync
 cps-data-sync
 cps-subscriptions
diff --git a/csit/run-csit.sh b/csit/run-csit.sh
index 9a344c1ffd..6f5142c917 100755
--- a/csit/run-csit.sh
+++ b/csit/run-csit.sh
@@ -43,6 +43,32 @@ fi
 # functions
 #
 
+# relax set options so the sourced file will not fail
+# the responsibility is shifted to the sourced file...
+function relax_set() {
+    set +e
+    set +o pipefail
+}
+
+# load the saved set options
+function load_set() {
+    _setopts="$-"
+
+    # bash shellopts
+    for i in $(echo "$SHELLOPTS" | tr ':' ' ') ; do
+        set +o ${i}
+    done
+    for i in $(echo "$RUN_CSIT_SHELLOPTS" | tr ':' ' ') ; do
+        set -o ${i}
+    done
+
+    # other options
+    for i in $(echo "$_setopts" | sed 's/./& /g') ; do
+        set +${i}
+    done
+    set -${RUN_CSIT_SAVE_SET}
+}
+
 # wrapper for sourcing a file
 function source_safely() {
     [ -z "$1" ] && return 1
@@ -104,36 +130,26 @@ function save_set() {
     RUN_CSIT_SHELLOPTS="$SHELLOPTS"
 }
 
-# load the saved set options
-function load_set() {
-    _setopts="$-"
-
-    # bash shellopts
-    for i in $(echo "$SHELLOPTS" | tr ':' ' ') ; do
-        set +o ${i}
-    done
-    for i in $(echo "$RUN_CSIT_SHELLOPTS" | tr ':' ' ') ; do
-        set -o ${i}
-    done
-
-    # other options
-    for i in $(echo "$_setopts" | sed 's/./& /g') ; do
-        set +${i}
-    done
-    set -${RUN_CSIT_SAVE_SET}
-}
-
 # set options for quick bailout when error
 function harden_set() {
     set -xeo pipefail
     set +u # enabled it would probably fail too many often
 }
 
-# relax set options so the sourced file will not fail
-# the responsibility is shifted to the sourced file...
-function relax_set() {
-    set +e
-    set +o pipefail
+function run_test_plan() {
+    testplan=$1
+
+    cd "$WORKDIR"
+    echo "Reading the testplan:"
+    cat "${TESTPLANDIR}/${testplan}.txt" | egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' | sed "s|^|${WORKSPACE}/tests/|" > ${testplan}.txt
+    cat ${testplan}.txt
+    SUITES=$( xargs -a ${testplan}.txt )
+
+    python3 -m robot.run -N ${TESTPLAN} -v WORKSPACE:/tmp ${ROBOT_VARIABLES} ${TESTOPTIONS} ${SUITES}
+    RESULT=$?
+    load_set
+    echo "RESULT: $RESULT"
+    return $RESULT
 }
 
 #
@@ -158,10 +174,10 @@ if [ -z "$WORKSPACE" ]; then
     export WORKSPACE=$(git rev-parse --show-toplevel)
 fi
 
-if [ -f "${WORKSPACE}/${1}/testplan.txt" ]; then
+if [ -f "${WORKSPACE}/${1}/testplanCps.txt" ]; then
     export TESTPLAN="${1}"
 else
-    echo "testplan not found: ${WORKSPACE}/${TESTPLAN}/testplan.txt"
+    echo "testplan not found: ${WORKSPACE}/${TESTPLAN}/testplanCps.txt or testplanNcmp.txt"
     exit 2
 fi
 
@@ -198,12 +214,6 @@ fi
 docker_stats | tee "$WORKSPACE/archives/$TESTPLAN/_sysinfo-1-after-setup.txt"
 
 # Run test plan
-cd "$WORKDIR"
-echo "Reading the testplan:"
-cat "${TESTPLANDIR}/testplan.txt" | egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' | sed "s|^|${WORKSPACE}/tests/|" > testplan.txt
-cat testplan.txt
-SUITES=$( xargs -a testplan.txt )
-
 echo ROBOT_VARIABLES="${ROBOT_VARIABLES}"
 echo "Starting Robot test suites ${SUITES} ..."
 relax_set
@@ -213,9 +223,18 @@ python3 --version
 pip freeze
 python3 -m robot.run --version || :
 
-python3 -m robot.run -N ${TESTPLAN} -v WORKSPACE:/tmp ${ROBOT_VARIABLES} ${TESTOPTIONS} ${SUITES}
-RESULT=$?
-load_set
-echo "RESULT: $RESULT"
+run_test_plan "testplanCps"
+CPSRESULT="$?"
+
+cd "${TESTPLANDIR}"
+checkandmount="${TESTPLANDIR}/sdnc/check_sdnc_mount_node.sh"
+if [ -f "${checkandmount}" ]; then
+    echo "Running check_sdnc_mount_node script ${checkandmount}"
+    source_safely "${checkandmount}"
+fi
+
+run_test_plan "testplanNcmp"
+NCMPRESULT="$?"
+
 # Note that the final steps are done in on_exit function after this exit!
-exit $RESULT
+exit $CPSRESULT || $NCMPRESULT