diff options
Diffstat (limited to 'src/test/resources/tosca/new-converter')
5 files changed, 396 insertions, 0 deletions
diff --git a/src/test/resources/tosca/new-converter/constraints.yaml b/src/test/resources/tosca/new-converter/constraints.yaml new file mode 100644 index 00000000..7a94ca96 --- /dev/null +++ b/src/test/resources/tosca/new-converter/constraints.yaml @@ -0,0 +1,60 @@ +tosca_definitions_version: tosca_simple_yaml_1_0_0
+policy_types:
+ onap.policies.controlloop.operational.common.Drools:
+ derived_from: onap.policies.controlloop.operational.Common
+ type_version: 1.0.0
+ version: 1.0.0
+ description: Operational policies for Drools PDP
+ properties:
+ controllerName:
+ type: String
+ description: Drools controller properties
+ required: true
+data_types:
+ onap.datatype.controlloop.Operation:
+ derived_from: tosca.datatypes.Root
+ description: An operation supported by an actor
+ properties:
+ id:
+ type: String
+ description: Unique identifier for the operation
+ required: true
+ constraints:
+ - length: 8
+ description:
+ type: Array
+ description: A user-friendly description of the intent for the operation
+ required: false
+ constraints:
+ - min_length: 5
+ - max_length: 7
+ test:
+ type: Integer
+ description: |
+ Overall timeout for executing all the operations. This timeout should equal or exceed the total
+ timeout for each operation listed.
+ required: true
+ constraints:
+ - greater_than: 7
+ - greater_or_equal: 1
+ - less_than: 7
+ - less_or_equal: 1
+ timeout:
+ type: Integer
+ description: The amount of time for the actor to perform the operation.
+ required: true
+ constraints:
+ - valid_values: [3,4,5.5,6,10]
+ retries:
+ type: Integer
+ description: The number of retries the actor should attempt to perform the operation.
+ required: true
+ default: 0
+ constraints:
+ - equal: 5
+ success:
+ type: String
+ description: Points to the operation to invoke on success. A value of "final_success" indicates and end to the operation.
+ required: false
+ constraints:
+ - valid_values: [VALID,TERMINATED]
diff --git a/src/test/resources/tosca/new-converter/origin.json b/src/test/resources/tosca/new-converter/origin.json new file mode 100644 index 00000000..da0529d0 --- /dev/null +++ b/src/test/resources/tosca/new-converter/origin.json @@ -0,0 +1 @@ +{"onap.policies.controlloop.operational.common.Drools":{"derived_from":{"onap.policies.controlloop.operational.Common":{"derived_from":"tosca.policies.Root","required":["id","timeout","abatement","trigger","operations"],"properties":{"id":{"type":"String","description":"The unique control loop id.","required":true},"timeout":{"type":"Integer","description":"Overall timeout for executing all the operations. This timeout should equal or exceed the total\ntimeout for each operation listed.\n","required":true},"abatement":{"description":"Whether an abatement event message will be expected for the control loop from DCAE.","required":true},"trigger":{"type":"String","description":"Initial operation to execute upon receiving an Onset event message for the Control Loop.","required":true},"operations":{"type":"List","description":"List of operations to be performed when Control Loop is triggered.","required":true,"entry_schema":{"type":{"onap.datatype.controlloop.Operation":{"derived_from":"tosca.datatypes.Root","required":["id","operation","timeout","retries"],"properties":{"id":{"type":"String","description":"Unique identifier for the operation","required":true},"description":{"type":"String","description":"A user-friendly description of the intent for the operation","required":false},"operation":{"type":{"onap.datatype.controlloop.Actor":{"derived_from":"tosca.datatypes.Root","required":["actor","operation","target"],"properties":{"actor":{"type":"String","description":"The actor performing the operation.","required":true},"operation":{"type":"String","description":"The operation the actor is performing.","required":true},"target":{"type":"String","description":"The resource the operation should be performed on.","required":true,"metadata":{"clamp_possible_values":"some special treatment"}},"payload":{"type":"Map","description":"Name/value pairs of payload information passed by Policy to the actor","required":false,"entry_schema":{"type":"String"}}}}},"description":"The definition of the operation to be performed.","required":true},"timeout":{"type":"Integer","description":"The amount of time for the actor to perform the operation.","required":true},"retries":{"type":"Integer","description":"The number of retries the actor should attempt to perform the operation.","required":true},"success":{"type":"String","description":"Points to the operation to invoke on success. A value of \"final_success\" indicates and end to the operation.","required":false},"failure":{"type":"String","description":"Points to the operation to invoke on Actor operation failure.","required":false},"failure_timeout":{"type":"String","description":"Points to the operation to invoke when the time out for the operation occurs.","required":false},"failure_retries":{"type":"String","description":"Points to the operation to invoke when the current operation has exceeded its max retries.","required":false},"failure_exception":{"type":"String","description":"Points to the operation to invoke when the current operation causes an exception.","required":false},"failure_guard":{"type":"String","description":"Points to the operation to invoke when the current operation is blocked due to guard policy enforcement.","required":false}}}}}}}}},"required":[],"properties":{"controllerName":{"type":"String","description":"Drools controller properties","required":false}}}}
\ No newline at end of file diff --git a/src/test/resources/tosca/new-converter/rendu.json b/src/test/resources/tosca/new-converter/rendu.json new file mode 100644 index 00000000..da0529d0 --- /dev/null +++ b/src/test/resources/tosca/new-converter/rendu.json @@ -0,0 +1 @@ +{"onap.policies.controlloop.operational.common.Drools":{"derived_from":{"onap.policies.controlloop.operational.Common":{"derived_from":"tosca.policies.Root","required":["id","timeout","abatement","trigger","operations"],"properties":{"id":{"type":"String","description":"The unique control loop id.","required":true},"timeout":{"type":"Integer","description":"Overall timeout for executing all the operations. This timeout should equal or exceed the total\ntimeout for each operation listed.\n","required":true},"abatement":{"description":"Whether an abatement event message will be expected for the control loop from DCAE.","required":true},"trigger":{"type":"String","description":"Initial operation to execute upon receiving an Onset event message for the Control Loop.","required":true},"operations":{"type":"List","description":"List of operations to be performed when Control Loop is triggered.","required":true,"entry_schema":{"type":{"onap.datatype.controlloop.Operation":{"derived_from":"tosca.datatypes.Root","required":["id","operation","timeout","retries"],"properties":{"id":{"type":"String","description":"Unique identifier for the operation","required":true},"description":{"type":"String","description":"A user-friendly description of the intent for the operation","required":false},"operation":{"type":{"onap.datatype.controlloop.Actor":{"derived_from":"tosca.datatypes.Root","required":["actor","operation","target"],"properties":{"actor":{"type":"String","description":"The actor performing the operation.","required":true},"operation":{"type":"String","description":"The operation the actor is performing.","required":true},"target":{"type":"String","description":"The resource the operation should be performed on.","required":true,"metadata":{"clamp_possible_values":"some special treatment"}},"payload":{"type":"Map","description":"Name/value pairs of payload information passed by Policy to the actor","required":false,"entry_schema":{"type":"String"}}}}},"description":"The definition of the operation to be performed.","required":true},"timeout":{"type":"Integer","description":"The amount of time for the actor to perform the operation.","required":true},"retries":{"type":"Integer","description":"The number of retries the actor should attempt to perform the operation.","required":true},"success":{"type":"String","description":"Points to the operation to invoke on success. A value of \"final_success\" indicates and end to the operation.","required":false},"failure":{"type":"String","description":"Points to the operation to invoke on Actor operation failure.","required":false},"failure_timeout":{"type":"String","description":"Points to the operation to invoke when the time out for the operation occurs.","required":false},"failure_retries":{"type":"String","description":"Points to the operation to invoke when the current operation has exceeded its max retries.","required":false},"failure_exception":{"type":"String","description":"Points to the operation to invoke when the current operation causes an exception.","required":false},"failure_guard":{"type":"String","description":"Points to the operation to invoke when the current operation is blocked due to guard policy enforcement.","required":false}}}}}}}}},"required":[],"properties":{"controllerName":{"type":"String","description":"Drools controller properties","required":false}}}}
\ No newline at end of file diff --git a/src/test/resources/tosca/new-converter/sampleOperationalPolicies.yaml b/src/test/resources/tosca/new-converter/sampleOperationalPolicies.yaml new file mode 100644 index 00000000..c2afeccd --- /dev/null +++ b/src/test/resources/tosca/new-converter/sampleOperationalPolicies.yaml @@ -0,0 +1,160 @@ +
+tosca_definitions_version: tosca_simple_yaml_1_0_0
+policy_types:
+ onap.policies.controlloop.operational.Common:
+ derived_from: tosca.policies.Root
+ version: 1.0.0
+ description: Operational Policy for Control Loop execution
+ properties:
+ id:
+ type: String
+ description: The unique control loop id.
+ required: true
+ timeout:
+ type: Integer
+ description: |
+ Overall timeout for executing all the operations. This timeout should equal or exceed the total
+ timeout for each operation listed.
+ required: true
+ abatement:
+ type: Boolean
+ description: Whether an abatement event message will be expected for the control loop from DCAE.
+ required: true
+ default: false
+ trigger:
+ type: String
+ description: Initial operation to execute upon receiving an Onset event message for the Control Loop.
+ required: true
+ operations:
+ type: List
+ description: List of operations to be performed when Control Loop is triggered.
+ required: true
+ entry_schema:
+ type: onap.datatype.controlloop.Operation
+ onap.policies.controlloop.operational.common.Drools:
+ derived_from: onap.policies.controlloop.operational.Common
+ type_version: 1.0.0
+ version: 1.0.0
+ description: Operational policies for Drools PDP
+ properties:
+ controllerName:
+ type: String
+ description: Drools controller properties
+ required: false
+data_types:
+ # TBD if this is needed
+ onap.datatype.controlloop.operation.Failure:
+ derived_from: tosca.datatypes.Root
+ description: Captures information of an operational failure performed for control loop
+ properties:
+ messages:
+ type: String
+ description: error message
+ required: true
+ category:
+ type: String
+ description: |
+ The category the error occurred in. Whether this is a general error from the actor, or the operation
+ timed out, retries were exhausted in trying to execute the operation, a guard policy prevented the
+ operation from occuring, or an exception in the system caused the failure.
+ constraints:
+ - valid_values: [error, timeout, retries, guard, exception]
+ onap.datatype.controlloop.Target:
+ derived_from: tosca.datatypes.Root
+ description: Definition for a entity in A&AI to perform a control loop operation on
+ properties:
+ targetType:
+ type: String
+ description: Category for the target type
+ required: true
+ constraints:
+ - valid_values: [VNF, VM, VFMODULE, PNF]
+ entityIds:
+ type: Map
+ description: |
+ Map of values that identify the resource. If none are provided, it is assumed that the
+ entity that generated the ONSET event will be the target.
+ required: false
+ entry_schema:
+ type: String
+ onap.datatype.controlloop.Actor:
+ derived_from: tosca.datatypes.Root
+ description: An actor/operation/target definition
+ properties:
+ actor:
+ type: String
+ description: The actor performing the operation.
+ required: true
+ operation:
+ type: String
+ description: The operation the actor is performing.
+ required: true
+ target:
+ type: String
+ description: The resource the operation should be performed on.
+ required: true
+ metadata:
+ clamp_possible_values: <string:see clamp project for syntax>
+ payload:
+ type: Map
+ description: Name/value pairs of payload information passed by Policy to the actor
+ required: false
+ entry_schema:
+ type: String
+ onap.datatype.controlloop.Operation:
+ derived_from: tosca.datatypes.Root
+ description: An operation supported by an actor
+ properties:
+ id:
+ type: String
+ description: Unique identifier for the operation
+ required: true
+ description:
+ type: String
+ description: A user-friendly description of the intent for the operation
+ required: false
+ operation:
+ type: onap.datatype.controlloop.Actor
+ description: The definition of the operation to be performed.
+ required: true
+ metadata:
+ clamp_possible_values: <string:see clamp project for syntax>
+ timeout:
+ type: Integer
+ description: The amount of time for the actor to perform the operation.
+ required: true
+ retries:
+ type: Integer
+ description: The number of retries the actor should attempt to perform the operation.
+ required: true
+ default: 0
+ success:
+ type: String
+ description: Points to the operation to invoke on success. A value of "final_success" indicates and end to the operation.
+ required: false
+ default: final_success
+ failure:
+ type: String
+ description: Points to the operation to invoke on Actor operation failure.
+ required: false
+ default: final_failure
+ failure_timeout:
+ type: String
+ description: Points to the operation to invoke when the time out for the operation occurs.
+ required: false
+ default: final_failure_timeout
+ failure_retries:
+ type: String
+ description: Points to the operation to invoke when the current operation has exceeded its max retries.
+ required: false
+ default: final_failure_retries
+ failure_exception:
+ type: String
+ description: Points to the operation to invoke when the current operation causes an exception.
+ required: false
+ default: final_failure_exception
+ failure_guard:
+ type: String
+ description: Points to the operation to invoke when the current operation is blocked due to guard policy enforcement.
+ required: false
+ default: final_failure_guard
diff --git a/src/test/resources/tosca/new-converter/sampleOperationalPoliciesEXTENTED.yaml b/src/test/resources/tosca/new-converter/sampleOperationalPoliciesEXTENTED.yaml new file mode 100644 index 00000000..9d45c645 --- /dev/null +++ b/src/test/resources/tosca/new-converter/sampleOperationalPoliciesEXTENTED.yaml @@ -0,0 +1,174 @@ +
+tosca_definitions_version: tosca_simple_yaml_1_0_0
+policy_types:
+ onap.policies.controlloop.operational.Common:
+ derived_from: onap.datatype.controlloop.operation.Failure
+ version: 1.0.0
+ description: Operational Policy for Control Loop execution
+ properties:
+ id:
+ type: String
+ description: The unique control loop id.
+ required: true
+ timeout:
+ type: Integer
+ description: |
+ Overall timeout for executing all the operations. This timeout should equal or exceed the total
+ timeout for each operation listed.
+ required: true
+ constraints:
+ - valid_values: [1, 2, 5]
+ - equal: 5
+ - greater_than: 7
+ - greater_or_equal: 1
+ - less_than: 7
+ - less_or_equal: 1
+ abatement:
+ type: Boolean
+ description: Whether an abatement event message will be expected for the control loop from DCAE.
+ required: true
+ default: false
+ trigger:
+ type: String
+ description: Initial operation to execute upon receiving an Onset event message for the Control Loop.
+ required: true
+ operations:
+ type: List
+ description: List of operations to be performed when Control Loop is triggered.
+ required: true
+ entry_schema:
+ type: onap.datatype.controlloop.Operation
+ onap.policies.controlloop.operational.common.Drools:
+ derived_from: onap.policies.controlloop.operational.Common
+ type_version: 1.0.0
+ version: 1.0.0
+ description: Operational policies for Drools PDP
+ properties:
+ controllerName:
+ type: String
+ description: Drools controller properties
+ required: true
+data_types:
+ # TBD if this is needed
+ onap.datatype.controlloop.operation.Failure:
+ derived_from: onap.datatype.controlloop.Target
+ description: Captures information of an operational failure performed for control loop
+ properties:
+ messages:
+ type: String
+ description: error message
+ required: true
+ category:
+ type: String
+ description: |
+ The category the error occurred in. Whether this is a general error from the actor, or the operation
+ timed out, retries were exhausted in trying to execute the operation, a guard policy prevented the
+ operation from occuring, or an exception in the system caused the failure.
+ constraints:
+ - valid_values: [error, timeout, retries, guard, exception]
+ onap.datatype.controlloop.Target:
+ derived_from: tosca.datatypes.Root
+ description: Definition for a entity in A&AI to perform a control loop operation on
+ properties:
+ targetType:
+ type: String
+ description: Category for the target type
+ required: true
+ constraints:
+ - valid_values: [VNF, VM, VFMODULE, PNF]
+ entityIds:
+ type: Map
+ description: |
+ Map of values that identify the resource. If none are provided, it is assumed that the
+ entity that generated the ONSET event will be the target.
+ required: false
+ entry_schema:
+ type: String
+ onap.datatype.controlloop.Actor:
+ derived_from: tosca.datatypes.Root
+ description: An actor/operation/target definition
+ properties:
+ actor:
+ type: String
+ description: The actor performing the operation.
+ required: true
+ default: [1,"String",5.5,true]
+ operation:
+ type: String
+ description: The operation the actor is performing.
+ required: true
+ target:
+ type: String
+ description: The resource the operation should be performed on.
+ required: true
+ metadata:
+ clamp_possible_values: <string:see clamp project for syntax>
+ payload:
+ type: Map
+ description: Name/value pairs of payload information passed by Policy to the actor
+ required: false
+ entry_schema:
+ type: String
+ onap.datatype.controlloop.Operation:
+ derived_from: tosca.datatypes.Root
+ description: An operation supported by an actor
+ properties:
+ id:
+ type: String
+ description: Unique identifier for the operation
+ required: true
+ description:
+ type: Array
+ description: A user-friendly description of the intent for the operation
+ required: false
+ constraints:
+ - min_length: 5
+ - max_length: 7
+ - length: 1
+ operation:
+ type: onap.datatype.controlloop.Actor
+ description: The definition of the operation to be performed.
+ required: true
+ metadata:
+ clamp_possible_values: <string:see clamp project for syntax>
+ timeout:
+ type: Integer
+ description: The amount of time for the actor to perform the operation.
+ required: true
+ constraints:
+ - valid_values: [3, 4, 5.5, 6, 10]
+ retries:
+ type: Integer
+ description: The number of retries the actor should attempt to perform the operation.
+ required: true
+ default: 0
+ success:
+ type: String
+ description: Points to the operation to invoke on success. A value of "final_success" indicates and end to the operation.
+ required: false
+ default: final_success
+ failure:
+ type: String
+ description: Points to the operation to invoke on Actor operation failure.
+ required: false
+ default: final_failure
+ failure_timeout:
+ type: String
+ description: Points to the operation to invoke when the time out for the operation occurs.
+ required: false
+ default: final_failure_timeout
+ failure_retries:
+ type: String
+ description: Points to the operation to invoke when the current operation has exceeded its max retries.
+ required: false
+ default: final_failure_retries
+ failure_exception:
+ type: String
+ description: Points to the operation to invoke when the current operation causes an exception.
+ required: false
+ default: final_failure_exception
+ failure_guard:
+ type: String
+ description: Points to the operation to invoke when the current operation is blocked due to guard policy enforcement.
+ required: false
+ default: final_failure_guard
|