diff options
Diffstat (limited to 'src/site/apt')
-rw-r--r-- | src/site/apt/nodes.apt | 953 |
1 files changed, 953 insertions, 0 deletions
diff --git a/src/site/apt/nodes.apt b/src/site/apt/nodes.apt new file mode 100644 index 000000000..b8ce9879a --- /dev/null +++ b/src/site/apt/nodes.apt @@ -0,0 +1,953 @@ +~~~ +~~ ============LICENSE_START======================================================= +~~ openECOMP : SDN-C +~~ ================================================================================ +~~ Copyright (C) 2017 AT&T Intellectual Property. All rights +~~ reserved. +~~ ================================================================================ +~~ Licensed under the Apache License, Version 2.0 (the "License"); +~~ you may not use this file except in compliance with the License. +~~ You may obtain a copy of the License at +~~ +~~ http://www.apache.org/licenses/LICENSE-2.0 +~~ +~~ Unless required by applicable law or agreed to in writing, software +~~ distributed under the License is distributed on an "AS IS" BASIS, +~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +~~ See the License for the specific language governing permissions and +~~ limitations under the License. +~~ ============LICENSE_END========================================================= +~~~ + + --- + Service Logic Interpreter + --- + Dan Timoney + --- + 2014-11-12 + --- + +Supported node types + + The following built-in node types are currently supported: + + * Flow Control + + * {{{Block node}<<block>>}} + + * {{{Call node}<<call>>}} + + * {{{For node}<<for>>}} + + * {{{Return node}<<return>>}} + + * {{{Set node}<<set>>}} + + * {{{Switch node}<<switch>>}} + + * Device Management + + * {{{Configure node}<<configure>>}} + + * Java Plugin Support + + * {{{Execute node}<<execute>>}} + + * Recording + + * {{{Record node}<<record>>}} + + * Resource Management + + * {{{Delete node}<<delete>>}} + + * {{{Exists node}<<exists>>}} + + * {{{Get-resource node}<<get-resource>>}} + + * {{{Is-available node}<<is-available>>}} + + * {{{Notify node}<<notify>>}} + + * {{{Release node}<<release>>}} + + * {{{Reserve node}<<reserve>>}} + + * {{{Save node}<<save>>}} + + * {{{Update node}<<update>>}} + + +* Flow Control + +** Block node + +*** Description + + A <<block>> node is used to executes a set of nodes. + +*** Attributes + +*--------------*--------------------------------------------+ +| <<atomic>> | if <true>, then if a node returns failure, subsequent nodes will not be executed and nodes already executed will be backed out. +*--------------*--------------------------------------------+ + +*** Parameters + + None + +*** Outcomes + + None + +*** Example + ++-----------------+ +<block> + <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder"> + <parameter name="file" value="/tmp/sample_r1.log" /> + <parameter name="field1" value="__TIMESTAMP__"/> + <parameter name="field2" value="RESERVED"/> + <parameter name="field3" value="$asePort.uni_circuit_id"/> + </record> + <return status="success"> + <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" /> + </return> +</block> ++-----------------+ + + + +**Call node + +*** Description + + A <<call>> node is used to call another graph + +*** Attributes + +*--------------*-------+ +| <<module>> | Module of directed graph to call. If unset, defaults to that of calling graph +*--------------*-------+ +| <<rpc>> | rpc of directed graph to call. +*--------------*-------+ +| <<version>> | version of graph to call, If unset, uses active version. +*--------------*-------+ +| <<mode>> | mode (sync/async) of graph to call. If unset, defaults to that of calling graph. +*--------------*-------+ + + + +*** Parameters + + Not applicable + +*** Outcomes + +*----------*---------+ +| <<success>> | Sub graph returned success +*----------*---------+ +| <<not-found>> | Graph not found +*----------*---------+ +| <<failure>> | Subgraph returned success +*----------*---------+ + . + +*** Example + ++-------------------+ +<call rpc="svc-topology-reserve" mode="sync" /> ++-------------------+ + +**For node + +*** Description + + A <<for>> node provides a fixed iteration looping mechanism, similar to the Java for loop + +*** Attributes + +*--------------*-------+ +| <<index>> | index variable +*--------------*-------+ +| <<start>> | initial value +*--------------*-------+ +| <<end>> | maximum value +*--------------*-------+ + + +*** Parameters + + Not applicable. + +*** Outcomes + + Not applicable. The <<status>> node has no outcomes. + +*** Example + ++-------------------+ +<for index="i" start="0" end="`$service-data.universal-cpe-ft.l2-switch-interfaces_length`"> + <record plugin="org.openecomp.sdnc.sli.recording.Slf4jRecorder"> + <parameter name="logger" value="message-log"/> + <parameter name="level" value="info"/> + <parameter name="field1" value="`'current l2-switch-interface name is ' + $service-data.universal-cpe-ft.l2-switch-interfaces[$i].name`"/> + </record> +</for> ++-------------------+ + +**Return node + +*** Description + + A <<return>> node is used to return a status to the invoking MD-SAL application + +*** Attributes + +*--------------*-------+ +| <<status>> | Status value to return (<success> or <failure>) +*--------------*-------+ + + +*** Parameters + + The following optional parameters may be passed to convey more + detailed status information. + +*------------*-----------+ +| <<error-code>> | A brief, usually numeric, code indicating the error condition +*------------*-----------+ +| <<error-message>> | A more detailed error message +*------------*-----------+ + +*** Outcomes + + Not applicable. The <<status>> node has no outcomes. + +*** Example + ++-------------------+ +<return status="failure"> + <parameter name="error-code" value="1542" /> + <parameter name="error-message" value="Activation failure" /> +</return> ++-------------------+ + +**Set node + +*** Description + + A <<set>> node is used to set one or more values in the execution context + +*** Attributes + +*--------------*-------+ +| <<only-if-unset>> | If true the set node will only execute if the current value of the target is null +*--------------*-------+ + +*** Parameters + + Values to be set are passed as parameters + +*** Outcomes + + Not applicable. The <<set>> node has no outcomes. + +*** Example + ++-------------------+ +<set> + <parameter name="vlan" value="$network.provider-segmentation-id" /> +</set> ++-------------------+ + +**Switch node + +*** Description + + A <<switch>> node is used to make a decision based on its <<test>> attribute. + +*** Attributes + +*--------------*-------+ +| <<test>> | Condition to test +*--------------*-------+ + + +*** Parameters + + None + + +*** Outcomes + + Depends on the <<test>> condition + +*** Example + ++-------------------+ +<switch test="$uni-cir-units"> + <outcome value="Mbps"> + <reserve plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value" + pfx="asePort"> + + <outcome value="success"> + <return status="success"> + <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" /> + </return> + </outcome> + <outcome value="Other"> + <return status="failure"> + <parameter name="error-code" value="1010" /> + <parameter name="error-message" value="No ports found that match criteria" /> + </return> + </outcome> + </reserve> + </outcome> + <outcome value="Gbps"> + <reserve plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value*1000" + pfx="asePort"> + + <outcome value="success"> + <return status="success"> + <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" /> + </return> + </outcome> + <outcome value="Other"> + <return status="failure"> + <parameter name="error-code" value="1010" /> + <parameter name="error-message" value="No ports found that match criteria" /> + </return> + </outcome> + </reserve> + </outcome> +</switch> ++-------------------+ + +* Device Management + +**Configure node + +*** Description + + A <<configure>> node is used to configure a device. + +*** Attributes + +*--------------*-------+ +| <<adaptor>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<activate>> | Activate device/interface, for devices that support a separate activation step. +*--------------*-------+ +| <<key>> | SQL-like string specifying criteria for item to configure +*--------------*-------+ + +*** Parameters + + Specific to device adaptor. + +*** Outcomes + +*-----------*-------+ +| <<success>> | Device successfully configured +*-----------*-------+ +| <<not-found>> | Element to be configured does not exist. +*-----------*--------+ +| <<not-ready>> | Element is not in a state where it can be configured/activated +*-----------*-------+ +| <<already-active>> | Attempt to activate element that is already active +*-----------*-------+ +| <<failure>> | Configure failed for some other reason +*-----------*-------+ + +*** Example + ++-------------------+ +<configure adaptor="org.openecomp.sdnc.sli.adaptor.emt.EmtAdaptor" + key="$uni-circuit-id" activate="true"> + <parameter name="circuit.id" value="$uni-circuit-id" /> + <parameter name="subscriber.name" value="$subscriber-name" /> + <parameter name="emt.clli" value="$edge-device-clli" /> + <parameter name="port.tagging" value="$port-tagging" /> + <parameter name="port.mediaSpeed" value="$media-speed" /> + <parameter name="location.state" value="$uni-location-state" /> + <parameter name="location.city" value="$uni-location-city" /> + <parameter name="cosCategory" value="$cos-category" /> + <parameter name="gosProfile" value="$gos-profile" /> + <parameter name="lldp" value="$asePort.resource-lldp" /> + <parameter name="mtu" value="$asePort.resource-mtu" /> + <outcome value="success"> + <block> + <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder"> + <parameter name="file" value="/tmp/sample_r1.log" /> + <parameter name="field1" value="__TIMESTAMP__"/> + <parameter name="field2" value="ACTIVE"/> + <parameter name="field3" value="$uni-circuit-id"/> + </record> + <return status="success"> + <parameter name="edge-device-clli" value="$asePort.resource-emt-clli" /> + </return> + </block> + </outcome> + <outcome value="already-active"> + <return status="failure"> + <parameter name="error-code" value="1590" /> + <parameter name="error-message" value="Port already active" /> + </return> + </outcome> + <outcome value="Other"> + <return status="failure"> + <parameter name="error-code" value="1542" /> + <parameter name="error-message" value="Activation failure" /> + </return> + </outcome> +</configure> ++-------------------+ + +* Java Plugin Support + +**Execute node + +*** Description + + An <<execute>> node is used to execute Java code supplied as a plugin + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of plugin to be used +*--------------*-------+ +| <<method>> | Name of method in the plugin class to execute. Method must return void, and take 2 arguments: a Map (for parameters) and a SvcLogicContext (to allow plugin read/write access to context memory) +*--------------*-------+ + +*** Parameters + + Specific to plugin / method + +*** Outcomes + +*-----------*-------+ +| <<success>> | Device successfully configured +*-----------*-------+ +| <<not-found>> | Plugin class could not be loaded +*-----------*--------+ +| <<unsupported-method>> | Named method taking (Map, SvcLogicContext) could not be found +*-----------*-------+ +| <<failure>> | Configure failed for some other reason +*-----------*-------+ + +*** Example + ++-------------------+ +<execute plugin="org.openecomp.sdnc.sli.plugin.HelloWorld" + method="log"> + <parameter name="message" value="Hello, world!" /> + <outcome value="success"> + <return status="success"/> + </outcome> + <outcome value="not-found"> + <return status="failure"> + <parameter name="error-code" value="1590" /> + <parameter name="error-message" value="Could not locate plugin" /> + </return> + </outcome> + <outcome value="Other"> + <return status="failure"> + <parameter name="error-code" value="1542" /> + <parameter name="error-message" value="Internal error" /> + </return> + </outcome> +</execute> ++-------------------+ + +* Recording + +** Record node + +*** Description + + A <<record>> node is used to record an event. For example, this might be used + to log provisioning events. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class to handle recording. +*--------------*-------+ + + +*** Parameters + + Parameters will depend on the plugin being used. For the FileRecorder class, + the parameters are as follows + +*------------*-----------+ +| <<file>> | The file to which the record should be written +*------------*-----------+ +| <<field1>> | First field to write. There will be <<field>> parameters for each field to write, from <<field1>> through <<fieldN>>. A special value __TIMESTAMP__ may be assigned to a field to insert the current timestamp +*------------*-----------+ + + +*** Outcomes + +*----------*---------+ +| <<success>> | Record successfully written +*----------*---------+ +| <<failure>> | Record could not be successfully written +*----------*---------+ + +*** Example + ++-------------------+ +<record plugin="org.openecomp.sdnc.sli.recording.FileRecorder"> + <parameter name="file" value="/tmp/sample_r1.log" /> + <parameter name="field1" value="__TIMESTAMP__"/> + <parameter name="field2" value="ACTIVE"/> + <parameter name="field3" value="$uni-circuit-id"/> +</record> ++-------------------+ + +* Resource Management + +** Delete node + +*** Description + + A <<delete>> node is used to delete a resource from the local resource inventory. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Type of resource to delete +*--------------*-------+ +| <<key>> | SQL-like string specifying key to delete +*--------------*-------+ + +*** Parameters + + None + +*** Outcomes + +*-----------*-------+ +| <<success>> | Resource specified deleted successfully. +*-----------*-------+ +| <failure>> | Resource specified was not deleted +*-----------*-------+ + +*** Example + ++-------------------+ +<delete plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + key="uni_circuit_id == $uni-circuit-id"> + <outcome value="true"> + <return status="success"/> + </outcome> + <outcome value="false"> + <return status="failure"/> + </outcome> +</delete> ++-------------------+ + + +** Exists node + +*** Description + + An <<exists>> node is used to determine whether a particular + instance of a resource exists. For example, this might be + used to test whether a particular switch CLLI is provisioned. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Type of resource to check +*--------------*-------+ +| <<key>> | SQL-like string specifying key to check for +*--------------*-------+ + +*** Parameters + + None + +*** Outcomes + +*-----------*-------+ +| <<true>> | Resource specified exists. +*-----------*-------+ +| <<false>> | Resource specified is unknown +*-----------*-------+ + +*** Example + ++-------------------+ +<exists plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + key="uni_circuit_id == $uni-circuit-id"> + <outcome value="true"> + <return status="success"/> + </outcome> + <outcome value="false"> + <return status="failure"/> + </outcome> +</exists> ++-------------------+ + +** Get-resource node + +*** Description + + A <<get-resource>> node is used to retrieve information about a + particular resource and make it available to other nodes in the + service logic tree. For example, this might be used to + retrieve information about a particular uni-port. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Type of resource to retrieve +*--------------*-------+ +| <<key>> | SQL-like string specifying criteria for retrieval +*--------------*-------+ +| <<pfx>> | Prefix to add to context variable names set for data retrieved +*--------------*-------+ +| <<select>> | String to specify, if key matches multiple entries, which entry should take precedence +*--------------*-------+ +| <<order-by>> | Prefix to add to context variable names set for data retrieved +*--------------*-------+ + +*** Parameters + + None + + +*** Outcomes + +*-----------*-------+ +| <<success>> | Resource successfully retrieved +*-----------*-------+ +| <<not-found>> | Resource referenced does not exist +*-----------*-------+ +| <<failure>> | Resource retrieve failed for some other reason +*-----------*-------+ + +*** Example + ++-------------------+ +<get-resource plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + key="uni_circuit_id == $uni-circuit-id" + pfx="current-port"> + <outcome value="success"> + <return status="success"/> + </outcome> + <outcome value="not-found"> + <return status="failure"/> + </outcome> + <outcome value="failure"> + <return status="failure"/> + </outcome> +</get-resource> ++-------------------+ + +** Is-available node + +*** Description + + An <<is-available>> node is used to determine whether a particular + type of resource is available. For example, this might be used to + test whether any ports are available for assignment on a particular switch. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Type of resource to check +*--------------*-------+ +| <<key>> | SQL-like string specifying key to check for +*--------------*-------+ +| <<pfx>> | Prefix to add to context variable names set for data retrieved +*--------------*-------+ + +*** Parameters + + None + +*** Outcomes + +*-----------*-------+ +| <<true>> | Resource requested is available +*-----------*-------+ +| <<false>> | Resource requested is not available +*-----------*-------+ + +*** Example + ++-------------------+ +<is-available plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"> + <outcome value="true"> + <return status="success"/> + </outcome> + <outcome value="false"> + <return status="failure"/> + </outcome> +</is-available> ++-------------------+ + +** Notify node + +*** Description + + A <<notify>> node is used to inform an external application (e.g. A&AI) that a resource was + updated. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Identifies resource that was updated +*--------------*-------+ +| <<action>> | Action that triggered notification to be sent (ADD/UPDATE/DELETE) +*--------------*-------+ + +*** Parameters + + None + +*** Outcomes + +*-----------*-------+ +| <<success>> | Notification was successful +*-----------*-------+ +| <<failure>> | Notification failed is not available +*-----------*-------+ + +*** Example + ++-------------------+ +<notify plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + action="ADD"> + <outcome value="success"> + <return status="success"/> + </outcome> + <outcome value="Other"> + <return status="failure"/> + </outcome> +</notify> ++-------------------+ + +** Release node + +*** Description + + A <<release>> node is used to mark a resource as no longer in use, and thus + available for assignment. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Type of resource to release +*--------------*-------+ +| <<key>> | SQL-like string specifying key to check of resource to release +*--------------*-------+ + +*** Parameters + + None + +*** Outcomes + +*-----------*-------+ +| <<success>> | Resource successfully released +*-----------*-------+ +| <<not-found>> | Resource referenced does not exist +*-----------*-------+ +| <<failure>> | Resource release failed for some other reason +*-----------*-------+ + +*** Example + ++-------------------+ +<release plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + key="uni_circuit_id == $uni-circuit-id"> + <outcome value="success"> + <return status="success"/> + </outcome> + <outcome value="not-found"> + <return status="failure"/> + </outcome> + <outcome value="failure"> + <return status="failure"/> + </outcome> +</release> ++-------------------+ + + +** Reserve node + +*** Description + + A <<reserve>> node is used to reserve a particular + type of resource.. For example, this might be used to + reserve a port on a particular switch. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Type of resource to reserve +*--------------*-------+ +| <<key>> | SQL-like string specifying criteria for reservation +*--------------*-------+ +| <<select>> | String to specify, if <<key>> matches multiple entries, which entry should take precedence +*--------------*-------+ + +*** Parameters + + None + +*** Outcomes + +*-----------*-------+ +| <<success>> | Resource requested was successfully reserved +*-----------*-------+ +| <<failure>> | Resource requested was not successfully reserved +*-----------*-------+ + +*** Example + ++-------------------+ +<reserve plugin="org.openecomp.sdnc.sli.resource.samplesvc.SampleServiceResource" + resource="ase-port" + key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value" + select="min(speed)"> + <outcome value="success"> + <return status="success"/> + </outcome> + <outcome value="failure"> + <return status="failure"/> + </outcome> +</reserve> ++-------------------+ + +** Save node + +*** Description + + A <<save>> node is used to save information about a + particular resource to persistent storage. For example, this might be used to + save information about a particular uni-port. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Type of resource to save +*--------------*-------+ +| <<key>> | SQL-like string specifying criteria for retrieval +*--------------*-------+ +| <<force>> | If "true", save resource even if this resource is already stored in persistent storage +*--------------*-------+ +| <<pfx>> | Prefix to be prepended to variable names, when attributes are set in SvcLogicContext +*--------------*-------+ + +*** Parameters + + Values to save (columns) are specified as parameters, with each name + corresponding to a column name and each value corresponding to the + value to set. + +*** Outcomes + +*-----------*-------+ +| <<success>> | Resource successfully saved +*-----------*-------+ +| <<failure>> | Resource save failed +*-----------*-------+ + +*** Example + ++-------------------+ +<save plugin="`$sample-resource-plugin`" resource="vnf" + key="vnf-name = $requests.vnf.vnf-name" force="true" + pfx="requests.vnf"> + <parameter name="vnf-name" + value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" /> + <parameter name="vnf-type" value="vce" /> + <parameter name="orchestration-status" value="pending-create" /> + <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" /> + <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" /> + <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" /> +</save> ++-------------------+ + +** Update node + +*** Description + + An <<update>> node is used to update information about a + particular resource to persistent storage. + +*** Attributes + +*--------------*-------+ +| <<plugin>> | Fully qualified Java class of resource adaptor to be used +*--------------*-------+ +| <<resource>> | Type of resource to update +*--------------*-------+ +| <<key>> | SQL-like string specifying criteria for retrieval +*--------------*-------+ +| <<pfx>> | Prefix to be prepended to variable names, when attributes are set in SvcLogicContext +*--------------*-------+ + +*** Parameters + + Values to save (columns) are specified as parameters, with each name + corresponding to a column name and each value corresponding to the + value to set. + +*** Outcomes + +*-----------*-------+ +| <<success>> | Resource successfully saved +*-----------*-------+ +| <<failure>> | Resource save failed +*-----------*-------+ + +*** Example + ++-------------------+ +<update plugin="`$sample-resource-plugin`" resource="vnf" + key="vnf-name = $requests.vnf.vnf-name" + pfx="requests.vnf"> + <parameter name="vnf-name" + value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" /> + <parameter name="vnf-type" value="vce" /> + <parameter name="orchestration-status" value="pending-create" /> + <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" /> + <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" /> + <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" /> +</update> ++-------------------+ + |