Migrate sli-core files

Migrate sli-core repo files into new
directory "core".

Signed-off-by: Jessica Wagantall <jwagantall@linuxfoundation.org>

2 files changed, 0 insertions, 984 deletions

diff --git a/src/site/apt/nodes.apt b/src/site/apt/nodes.apt
deleted file mode 100644
index 95a51467c..000000000
--- a/src/site/apt/nodes.apt
+++ /dev/null
@@ -1,953 +0,0 @@
-~~~
-~~ ============LICENSE_START=======================================================
-~~ ONAP : CCSDK
-~~ ================================================================================
-~~ Copyright (C) 2017 AT&T Intellectual Property. All rights
-~~ 						reserved.
-~~ ================================================================================
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~ 
-~~      http://www.apache.org/licenses/LICENSE-2.0
-~~ 
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License.
-~~ ============LICENSE_END=========================================================
-~~~
-
-      ---
-      Service Logic Interpreter
-      ---
-      Dan Timoney
-      ---
-      2014-11-12
-      ---
-
-Supported node types
-
-   The following built-in node types are currently supported:
-
-     *  Flow Control
-
-        *  {{{Block node}<<block>>}}
-
-        *  {{{Call node}<<call>>}}
-
-        *  {{{For node}<<for>>}}
-
-        *  {{{Return node}<<return>>}}
-
-        *  {{{Set node}<<set>>}}
-
-        *  {{{Switch node}<<switch>>}}
-
-     *  Device Management
-
-        *  {{{Configure node}<<configure>>}}
-
-     *  Java Plugin Support
-
-        *  {{{Execute node}<<execute>>}}
-
-     *  Recording
-
-        *  {{{Record node}<<record>>}}
-
-     *  Resource Management
-
-        *  {{{Delete node}<<delete>>}}
-
-        *  {{{Exists node}<<exists>>}}
-
-        *  {{{Get-resource node}<<get-resource>>}}
-
-        *  {{{Is-available node}<<is-available>>}}
-
-        *  {{{Notify node}<<notify>>}}
-
-        *  {{{Release node}<<release>>}}
-
-        *  {{{Reserve node}<<reserve>>}}
-
-        *  {{{Save node}<<save>>}}
-
-        *  {{{Update node}<<update>>}}
-
-
-* Flow Control
-
-** Block node
-
-*** Description
-
-   A <<block>> node is used to executes a set of nodes.
-
-*** Attributes
-
-*--------------*--------------------------------------------+
-| <<atomic>>   | if <true>, then if a node returns failure, subsequent nodes will not be executed and nodes already executed will be backed out.
-*--------------*--------------------------------------------+
-
-*** Parameters
-
-  None
-
-*** Outcomes
-
-  None
-
-*** Example
-
-+-----------------+
-<block>
-  <record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder">
-    <parameter name="file" value="/tmp/sample_r1.log" />
-    <parameter name="field1" value="__TIMESTAMP__"/>
-    <parameter name="field2" value="RESERVED"/>
-    <parameter name="field3" value="$asePort.uni_circuit_id"/>
-  </record>
-  <return status="success">
-    <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
-  </return>
-</block>
-+-----------------+
-
-
-
-**Call node
-
-*** Description
-
-  A <<call>> node is used to call another graph
-
-*** Attributes
-
-*--------------*-------+
-| <<module>>   | Module of directed graph to call.  If unset, defaults to that of calling graph
-*--------------*-------+
-| <<rpc>>      | rpc of directed graph to call.
-*--------------*-------+
-| <<version>>  | version of graph to call,  If unset, uses active version.
-*--------------*-------+
-| <<mode>>     | mode (sync/async) of graph to call.   If unset, defaults to that of calling graph.
-*--------------*-------+
-
-
-
-*** Parameters
-
-  Not applicable
-
-*** Outcomes
-
-*----------*---------+
-| <<success>> | Sub graph returned success
-*----------*---------+
-| <<not-found>> | Graph not found
-*----------*---------+
-| <<failure>> | Subgraph returned success
-*----------*---------+
-   .
-
-*** Example
-
-+-------------------+
-<call rpc="svc-topology-reserve" mode="sync" />
-+-------------------+
-
-**For node
-
-*** Description
-
-  A <<for>> node provides a fixed iteration looping mechanism, similar to the Java for loop
-
-*** Attributes
-
-*--------------*-------+
-| <<index>>   | index variable
-*--------------*-------+
-| <<start>>    | initial value
-*--------------*-------+
-| <<end>>      | maximum value
-*--------------*-------+
-
-
-*** Parameters
-
-  Not applicable.
-
-*** Outcomes
-
-  Not applicable.  The <<status>> node has no outcomes.
-
-*** Example
-
-+-------------------+
-<for index="i" start="0" end="`$service-data.universal-cpe-ft.l2-switch-interfaces_length`">
-   <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
-      <parameter name="logger" value="message-log"/>
-      <parameter name="level" value="info"/>
-      <parameter name="field1" value="`'current l2-switch-interface name is ' + $service-data.universal-cpe-ft.l2-switch-interfaces[$i].name`"/>
-   </record>
-</for>
-+-------------------+
-
-**Return node
-
-*** Description
-
-  A <<return>> node is used to return a status to the invoking MD-SAL application
-
-*** Attributes
-
-*--------------*-------+
-| <<status>>   | Status value to return (<success> or <failure>)
-*--------------*-------+
-
-
-*** Parameters
-
-  The following optional parameters may be passed to convey more
-  detailed status information.
-
-*------------*-----------+
-| <<error-code>> | A brief, usually numeric, code indicating the error condition
-*------------*-----------+
-| <<error-message>> | A more detailed error message
-*------------*-----------+
-
-*** Outcomes
-
-  Not applicable.  The <<status>> node has no outcomes.
-
-*** Example
-
-+-------------------+
-<return status="failure">
-  <parameter name="error-code" value="1542" />
-  <parameter name="error-message" value="Activation failure" />
-</return>
-+-------------------+
-
-**Set node
-
-*** Description
-
-  A <<set>> node is used to set one or more values in the execution context
-
-*** Attributes
-
-*--------------*-------+
-| <<only-if-unset>>   | If true the set node will only execute if the current value of the target is null
-*--------------*-------+
-
-*** Parameters
-
-  Values to be set are passed as parameters
-
-*** Outcomes
-
-  Not applicable.  The <<set>> node has no outcomes.
-
-*** Example
-
-+-------------------+
-<set>
-  <parameter name="vlan" value="$network.provider-segmentation-id" />
-</set>
-+-------------------+
-
-**Switch node
-
-*** Description
-
-  A <<switch>> node is used to make a decision based on its <<test>> attribute.
-
-*** Attributes
-
-*--------------*-------+
-| <<test>>   | Condition to test
-*--------------*-------+
-
-
-*** Parameters
-
-  None
-
-
-*** Outcomes
-
-  Depends on the <<test>> condition
-
-*** Example
-
-+-------------------+
-<switch test="$uni-cir-units">
-  <outcome value="Mbps">
-    <reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
-             resource="ase-port"
-             key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"
-             pfx="asePort">
-
-      <outcome value="success">
-        <return status="success">
-          <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
-        </return>
-      </outcome>
-      <outcome value="Other">
-        <return status="failure">
-          <parameter name="error-code" value="1010" />
-          <parameter name="error-message" value="No ports found that match criteria" />
-        </return>
-      </outcome>
-    </reserve>
-  </outcome>
-  <outcome value="Gbps">
-    <reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
-             resource="ase-port"
-             key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value*1000"
-             pfx="asePort">
-
-      <outcome value="success">
-        <return status="success">
-          <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
-        </return>
-      </outcome>
-      <outcome value="Other">
-        <return status="failure">
-          <parameter name="error-code" value="1010" />
-          <parameter name="error-message" value="No ports found that match criteria" />
-        </return>
-      </outcome>
-    </reserve>
-  </outcome>
-</switch>
-+-------------------+
-
-* Device Management
-
-**Configure node
-
-*** Description
-
-  A <<configure>> node is used to configure a device.
-
-*** Attributes
-
-*--------------*-------+
-| <<adaptor>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<activate>> | Activate device/interface, for devices that support a separate activation step.
-*--------------*-------+
-| <<key>>      | SQL-like string specifying criteria for item to configure
-*--------------*-------+
-
-*** Parameters
-
-  Specific to device adaptor.
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Device successfully configured
-*-----------*-------+
-| <<not-found>> | Element to be configured does not exist.
-*-----------*--------+
-| <<not-ready>> | Element is not in a state where it can be configured/activated
-*-----------*-------+
-| <<already-active>> | Attempt to activate element that is already active
-*-----------*-------+
-| <<failure>> | Configure failed for some other reason
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<configure adaptor="org.onap.ccsdk.sli.adaptors.emt.EmtAdaptor"
-           key="$uni-circuit-id" activate="true">
-  <parameter name="circuit.id" value="$uni-circuit-id" />
-  <parameter name="subscriber.name" value="$subscriber-name" />
-  <parameter name="emt.clli" value="$edge-device-clli" />
-  <parameter name="port.tagging" value="$port-tagging" />
-  <parameter name="port.mediaSpeed" value="$media-speed" />
-  <parameter name="location.state" value="$uni-location-state" />
-  <parameter name="location.city" value="$uni-location-city" />
-  <parameter name="cosCategory" value="$cos-category" />
-  <parameter name="gosProfile" value="$gos-profile" />
-  <parameter name="lldp" value="$asePort.resource-lldp" />
-  <parameter name="mtu" value="$asePort.resource-mtu" />
-  <outcome value="success">
-    <block>
-      <record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder">
-        <parameter name="file" value="/tmp/sample_r1.log" />
-        <parameter name="field1" value="__TIMESTAMP__"/>
-        <parameter name="field2" value="ACTIVE"/>
-        <parameter name="field3" value="$uni-circuit-id"/>
-      </record>
-      <return status="success">
-        <parameter name="edge-device-clli" value="$asePort.resource-emt-clli" />
-      </return>
-    </block>
-  </outcome>
-  <outcome value="already-active">
-    <return status="failure">
-      <parameter name="error-code" value="1590" />
-      <parameter name="error-message" value="Port already active" />
-    </return>
-  </outcome>
-  <outcome value="Other">
-    <return status="failure">
-      <parameter name="error-code" value="1542" />
-      <parameter name="error-message" value="Activation failure" />
-    </return>
-  </outcome>
-</configure>
-+-------------------+
-
-* Java Plugin Support
-
-**Execute node
-
-*** Description
-
-  An <<execute>> node is used to execute Java code supplied as a plugin
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of plugin to be used
-*--------------*-------+
-| <<method>> | Name of method in the plugin class to execute.  Method must return void, and take 2 arguments: a Map (for parameters) and a SvcLogicContext (to allow plugin read/write access to context memory)
-*--------------*-------+
-
-*** Parameters
-
-  Specific to plugin / method
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Device successfully configured
-*-----------*-------+
-| <<not-found>> | Plugin class could not be loaded
-*-----------*--------+
-| <<unsupported-method>> | Named method taking (Map, SvcLogicContext) could not be found
-*-----------*-------+
-| <<failure>> | Configure failed for some other reason
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<execute plugin="org.onap.ccsdk.sli.plugins.HelloWorld"
-           method="log">
-  <parameter name="message" value="Hello, world!" />
-  <outcome value="success">
-      <return status="success"/>
-  </outcome>
-  <outcome value="not-found">
-    <return status="failure">
-      <parameter name="error-code" value="1590" />
-      <parameter name="error-message" value="Could not locate plugin" />
-    </return>
-  </outcome>
-  <outcome value="Other">
-    <return status="failure">
-      <parameter name="error-code" value="1542" />
-      <parameter name="error-message" value="Internal error" />
-    </return>
-  </outcome>
-</execute>
-+-------------------+
-
-* Recording
-
-** Record node
-
-*** Description
-
-  A <<record>> node is used to record an event.  For example, this might be used
-  to log provisioning events.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class to handle recording.
-*--------------*-------+
-
-
-*** Parameters
-
- Parameters will depend on the plugin being used.  For the FileRecorder class,
- the parameters are as follows
-
-*------------*-----------+
-| <<file>> | The file to which the record should be written
-*------------*-----------+
-| <<field1>> | First field to write.  There will be <<field>> parameters for each field to write, from <<field1>> through <<fieldN>>.  A special value __TIMESTAMP__ may be assigned to a field to insert the current timestamp
-*------------*-----------+
-
-
-*** Outcomes
-
-*----------*---------+
-| <<success>> | Record successfully written
-*----------*---------+
-| <<failure>> | Record could not be successfully written
-*----------*---------+
-
-*** Example
-
-+-------------------+
-<record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder">
-  <parameter name="file" value="/tmp/sample_r1.log" />
-  <parameter name="field1" value="__TIMESTAMP__"/>
-  <parameter name="field2" value="ACTIVE"/>
-  <parameter name="field3" value="$uni-circuit-id"/>
-</record>
-+-------------------+
-
-* Resource Management
-
-** Delete node
-
-*** Description
-
-  A <<delete>> node is used to delete a resource from the local resource inventory.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Type of resource to delete
-*--------------*-------+
-| <<key>>      | SQL-like string specifying key to delete
-*--------------*-------+
-
-*** Parameters
-
-  None
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Resource specified deleted successfully.
-*-----------*-------+
-| <failure>> | Resource specified was not deleted
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<delete plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
-        resource="ase-port"
-        key="uni_circuit_id == $uni-circuit-id">
-  <outcome value="true">
-    <return status="success"/>
-  </outcome>
-  <outcome value="false">
-    <return status="failure"/>
-  </outcome>
-</delete>
-+-------------------+
-
-
-** Exists node
-
-*** Description
-
-  An <<exists>> node is used to determine whether a particular
-  instance of a resource exists.  For example, this might be
-  used to test whether a particular switch CLLI is provisioned.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Type of resource to check
-*--------------*-------+
-| <<key>>      | SQL-like string specifying key to check for
-*--------------*-------+
-
-*** Parameters
-
-  None
-
-*** Outcomes
-
-*-----------*-------+
-| <<true>>  | Resource specified exists.
-*-----------*-------+
-| <<false>> | Resource specified is unknown
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<exists plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
-        resource="ase-port"
-        key="uni_circuit_id == $uni-circuit-id">
-  <outcome value="true">
-    <return status="success"/>
-  </outcome>
-  <outcome value="false">
-    <return status="failure"/>
-  </outcome>
-</exists>
-+-------------------+
-
-** Get-resource node
-
-*** Description
-
-  A <<get-resource>> node is used to retrieve information about a
-  particular resource and make it available to other nodes in the
-  service logic tree.  For example, this might be used to
-  retrieve information about a particular uni-port.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Type of resource to retrieve
-*--------------*-------+
-| <<key>>      | SQL-like string specifying criteria for retrieval
-*--------------*-------+
-| <<pfx>>      | Prefix to add to context variable names set for data retrieved
-*--------------*-------+
-| <<select>>      | String to specify, if key matches multiple entries, which entry should take precedence
-*--------------*-------+
-| <<order-by>>      | Prefix to add to context variable names set for data retrieved
-*--------------*-------+
-
-*** Parameters
-
-  None
-
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Resource successfully retrieved
-*-----------*-------+
-| <<not-found>> | Resource referenced does not exist
-*-----------*-------+
-| <<failure>> | Resource retrieve failed for some other reason
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<get-resource plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
-              resource="ase-port"
-              key="uni_circuit_id == $uni-circuit-id"
-              pfx="current-port">
-  <outcome value="success">
-    <return status="success"/>
-  </outcome>
-  <outcome value="not-found">
-    <return status="failure"/>
-  </outcome>
-  <outcome value="failure">
-    <return status="failure"/>
-  </outcome>
-</get-resource>
-+-------------------+
-
-** Is-available node
-
-*** Description
-
-  An <<is-available>> node is used to determine whether a particular
-  type of resource is available.  For example, this might be used to
-  test whether any ports are available for assignment on a particular switch.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Type of resource to check
-*--------------*-------+
-| <<key>>      | SQL-like string specifying key to check for
-*--------------*-------+
-| <<pfx>>      | Prefix to add to context variable names set for data retrieved
-*--------------*-------+
-
-*** Parameters
-
-  None
-
-*** Outcomes
-
-*-----------*-------+
-| <<true>>  | Resource requested is available
-*-----------*-------+
-| <<false>> | Resource requested is not available
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<is-available plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
-              resource="ase-port"
-              key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value">
-  <outcome value="true">
-    <return status="success"/>
-  </outcome>
-  <outcome value="false">
-    <return status="failure"/>
-  </outcome>
-</is-available>
-+-------------------+
-
-** Notify node
-
-*** Description
-
-  A <<notify>> node is used to inform an external application (e.g. A&AI) that a resource was
-  updated.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Identifies resource that was updated
-*--------------*-------+
-| <<action>>      | Action that triggered notification to be sent (ADD/UPDATE/DELETE)
-*--------------*-------+
-
-*** Parameters
-
-  None
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Notification was successful
-*-----------*-------+
-| <<failure>> | Notification failed is not available
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<notify plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
-              resource="ase-port"
-              action="ADD">
-  <outcome value="success">
-    <return status="success"/>
-  </outcome>
-  <outcome value="Other">
-    <return status="failure"/>
-  </outcome>
-</notify>
-+-------------------+
-
-** Release node
-
-*** Description
-
-  A <<release>> node is used to mark a resource as no longer in use, and thus
-  available for assignment.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Type of resource to release
-*--------------*-------+
-| <<key>>      | SQL-like string specifying key to check of resource to release
-*--------------*-------+
-
-*** Parameters
-
-  None
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Resource successfully released
-*-----------*-------+
-| <<not-found>> | Resource referenced does not exist
-*-----------*-------+
-| <<failure>> | Resource release failed for some other reason
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<release plugin="org.onap.ccsdk.sli.adaptors.SampleServiceResource"
-         resource="ase-port"
-         key="uni_circuit_id == $uni-circuit-id">
-  <outcome value="success">
-    <return status="success"/>
-  </outcome>
-  <outcome value="not-found">
-    <return status="failure"/>
-  </outcome>
-  <outcome value="failure">
-    <return status="failure"/>
-  </outcome>
-</release>
-+-------------------+
-
-
-** Reserve node
-
-*** Description
-
-  A <<reserve>> node is used to reserve a particular
-  type of resource..  For example, this might be used to
-  reserve a port on a particular switch.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Type of resource to reserve
-*--------------*-------+
-| <<key>>      | SQL-like string specifying criteria for reservation
-*--------------*-------+
-| <<select>>   | String to specify, if <<key>> matches multiple entries, which entry should take precedence
-*--------------*-------+
-
-*** Parameters
-
-  None
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Resource requested was successfully reserved
-*-----------*-------+
-| <<failure>> | Resource requested was not successfully reserved
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
-         resource="ase-port"
-         key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"
-         select="min(speed)">
-  <outcome value="success">
-    <return status="success"/>
-  </outcome>
-  <outcome value="failure">
-    <return status="failure"/>
-  </outcome>
-</reserve>
-+-------------------+
-
-** Save node
-
-*** Description
-
-  A <<save>> node is used to save information about a
-  particular resource to persistent storage.  For example, this might be used to
-  save information about a particular uni-port.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Type of resource to save
-*--------------*-------+
-| <<key>>      | SQL-like string specifying criteria for retrieval
-*--------------*-------+
-| <<force>>    | If "true", save resource even if this resource is already stored in persistent storage
-*--------------*-------+
-| <<pfx>>      | Prefix to be prepended to variable names, when attributes are set in SvcLogicContext
-*--------------*-------+
-
-*** Parameters
-
-  Values to save (columns) are specified as parameters, with each name
-  corresponding to a column name and each value corresponding to the
-  value to set.
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Resource successfully saved
-*-----------*-------+
-| <<failure>> | Resource save failed
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<save plugin="`$sample-resource-plugin`" resource="vnf"
-    key="vnf-name = $requests.vnf.vnf-name" force="true"
-    pfx="requests.vnf">
-    <parameter name="vnf-name"
-        value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" />
-    <parameter name="vnf-type" value="vce" />
-    <parameter name="orchestration-status" value="pending-create" />
-    <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" />
-    <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" />
-    <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" />
-</save>
-+-------------------+
-
-** Update node
-
-*** Description
-
-  An <<update>> node is used to update information about a
-  particular resource to persistent storage.
-
-*** Attributes
-
-*--------------*-------+
-| <<plugin>>   | Fully qualified Java class of resource adaptor to be used
-*--------------*-------+
-| <<resource>> | Type of resource to update
-*--------------*-------+
-| <<key>>      | SQL-like string specifying criteria for retrieval
-*--------------*-------+
-| <<pfx>>      | Prefix to be prepended to variable names, when attributes are set in SvcLogicContext
-*--------------*-------+
-
-*** Parameters
-
-  Values to save (columns) are specified as parameters, with each name
-  corresponding to a column name and each value corresponding to the
-  value to set.
-
-*** Outcomes
-
-*-----------*-------+
-| <<success>>  | Resource successfully saved
-*-----------*-------+
-| <<failure>> | Resource save failed
-*-----------*-------+
-
-*** Example
-
-+-------------------+
-<update plugin="`$sample-resource-plugin`" resource="vnf"
-    key="vnf-name = $requests.vnf.vnf-name"
-    pfx="requests.vnf">
-    <parameter name="vnf-name"
-        value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" />
-    <parameter name="vnf-type" value="vce" />
-    <parameter name="orchestration-status" value="pending-create" />
-    <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" />
-    <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" />
-    <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" />
-</update>
-+-------------------+
-
diff --git a/src/site/site.xml b/src/site/site.xml
deleted file mode 100644
index af081b167..000000000
--- a/src/site/site.xml
+++ /dev/null
@@ -1,31 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!--
-  ============LICENSE_START=======================================================
-  ONAP : CCSDK
-  ================================================================================
-  Copyright (C) 2017 AT&T Intellectual Property. All rights
-  						reserved.
-  ================================================================================
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-       http://www.apache.org/licenses/LICENSE-2.0
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-  ============LICENSE_END=========================================================
-  -->
-
-<project>
-  <body>
-    <links>
-      <item name="Built-in Nodes" href="nodes.html" />
-    </links>
-    <menu ref="modules"/>
-
-    <menu ref="reports"/>
-
-  </body>
-</project>