Migrate sli-adaptor files

Migrate sli-adaptor repo files into
a new "adaptors" directory.

Signed-off-by: Jessica Wagantall <jwagantall@linuxfoundation.org>

1 files changed, 0 insertions, 180 deletions

diff --git a/resource-assignment/provider/src/test/resources/sql/data.sql b/resource-assignment/provider/src/test/resources/sql/data.sql
deleted file mode 100644
index 236a16d18..000000000
--- a/resource-assignment/provider/src/test/resources/sql/data.sql
+++ /dev/null
@@ -1,180 +0,0 @@
----
--- ============LICENSE_START=======================================================
--- openECOMP : SDN-C
--- ================================================================================
--- Copyright (C) 2017 AT&T Intellectual Property. All rights
---                         reserved.
--- ================================================================================
--- Licensed under the Apache License, Version 2.0 (the "License");
--- you may not use this file except in compliance with the License.
--- You may obtain a copy of the License at
--- 
---      http://www.apache.org/licenses/LICENSE-2.0
--- 
--- Unless required by applicable law or agreed to in writing, software
--- distributed under the License is distributed on an "AS IS" BASIS,
--- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
--- See the License for the specific language governing permissions and
--- limitations under the License.
--- ============LICENSE_END=========================================================
----
-
-INSERT INTO RESOURCE_RULE (
-    resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
-    allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-    'Bandwidth', 'L3SDN', 'IPAG-TOA', 'true', 'Port', 'true',
-    'service-speed-kbps', '0.5 * max-port-speed', '0.9 * max-port-speed');
-
-INSERT INTO RESOURCE_RULE (
-    resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
-    allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-    'Bandwidth', 'L3SDN', 'VCE-Cust', 'true', 'Server', 'true',
-    'service-speed-kbps', '0.6 * max-server-speed * number-primary-servers', 'max-server-speed * number-primary-servers');
-
-INSERT INTO RESOURCE_RULE (
-  resource_name, service_model, end_point_position, service_expression, equipment_level,
-    equipment_expression, allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-  'Connection', 'L3SDN', 'VCE-Cust', 'true', 'Server',
-    'true', '1', '40', '40');
-
-INSERT INTO RESOURCE_RULE (
-     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
-    allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-     'Bandwidth', 'L3SDN', 'VPE-Cust', 'true', 'Port', 'true',
-    'service-speed-kbps', '0.5 * max-port-speed', '0.9 * max-port-speed');
-
-INSERT INTO RESOURCE_RULE (
-  resource_name, service_model, end_point_position, service_expression,
-    equipment_level, equipment_expression, allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-  'Bandwidth', 'L3AVPN-EVC', 'VPE-Cust', 'true', 'Port', 'true', 'service-speed-kbps', '8000000', '8000000');
-
-INSERT INTO RESOURCE_RULE (
-  resource_name, service_model, end_point_position, service_expression,
-    equipment_level, equipment_expression, allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-  'Connection', 'L3AVPN-EVC', 'VPE-Cust', 'true', 'Port', 'true', '1', '200', '200');
-
-INSERT INTO RESOURCE_RULE (
-  resource_name, service_model, end_point_position, service_expression,
-    equipment_level, equipment_expression, allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-  'Bandwidth', 'L3AVPN-PORT', 'VPE-Cust', 'true', 'Port', 'true', 'service-speed-kbps', '8000000', '8000000');
-
-insert into RESOURCE_THRESHOLD (
-  resource_rule_id, threshold_expression, threshold_message)
-values (
-  (select resource_rule_id from RESOURCE_RULE where resource_name = 'Bandwidth' and equipment_level = 'Server'),
-    '0.5 * max-server-speed * number-primary-servers',
-    'The provisioned access bandwidth is at or exceeds 50% of the total server capacity.');
-
-insert into RESOURCE_THRESHOLD (
-  resource_rule_id, threshold_expression, threshold_message)
-values (
-  (select resource_rule_id from RESOURCE_RULE where resource_name = 'Bandwidth' and equipment_level = 'Server'),
-    '0.7 * max-server-speed * number-primary-servers',
-    'The provisioned access bandwidth is at or exceeds 70% of the total server capacity.');
-
-INSERT INTO RANGE_RULE (
-  range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-  'subinterface-id', 'L3AVPN-EVC', 'VPE-Cust', 'Port', 'true', '100-3999');
-
-INSERT INTO RANGE_RULE (
-  range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-  'vlan-id-inner', 'L3AVPN-EVC', 'VPE-Cust', 'Port', 'true', '2-4091');
-
-INSERT INTO RANGE_RULE (
-  range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-  'bundle-id', 'L3AVPN-PORT', 'VPE-Cust', 'Port', 'true', '1-99999');
-
-INSERT INTO MAX_PORT_SPEED (
-     image_file_name, end_point_position, interface_name, max_speed, unit)
-VALUES (
-     'JUNIPER_VPE_IMAGE_FILENAME', 'VPE-Cust', 'ae0', 5000, 'Mpbs');
-
-INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
-VALUES ('ALL', 5, 1600, 'Mbps', 'Max speed, when there are <=5 EVC on server');
-
-INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
-VALUES ('ALL', 10, 1400, 'Mbps', 'Max speed, when there are 6 to 10 (including 10) EVC on server');
-
-INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
-VALUES ('ALL', 15, 1000, 'Mbps', 'Max speed, when there are 11 to 15 (including 15) EVC on server');
-
-INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
-VALUES ('ALL', 20, 700, 'Mbps', 'Max speed, when there are 16 to 20 (including 20) EVC on server');
-
-INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
-VALUES ('ALL', 10000, 500, 'Mbps', 'Max speed, when there are 21 or more EVC on server');
-
-INSERT INTO PARAMETERS (name, value, category, memo)
-VALUES ('homing.pserver.sparing.ratio', '1:1', 'homing',
-  'Ratio of primary to backup servers within any of the AIC sites. Used in RA to calculate the max allowed bw in an AIC site.');
-
-INSERT INTO RESOURCE_RULE (
-     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
-    allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-     'PortBandwidth', 'ADIG', 'VPE', 'true', 'Port', 'true',
-    'service-speed-mbps', 'service-speed-mbps', 'service-speed-mbps');
-    
-INSERT INTO RESOURCE_RULE (
-     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
-    allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-     'Bandwidth', 'ADIG', 'VPE', 'true', 'VNF', 'vnf-type = "VPE"',
-    'service-speed-mbps', '0.5 * max-vpe-bandwidth-mbps', '0.9 * max-vpe-bandwidth-mbps');
-	
-	
-INSERT INTO RESOURCE_RULE (
-     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
-    allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-     'Bandwidth', 'ADIG', 'VPE', 'true', 'AffinityLink', 'true',
-    'service-speed-mbps', '9999999999', '9999999999');
-	
-INSERT INTO RESOURCE_RULE (
-     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
-    allocation_expression, soft_limit_expression, hard_limit_expression)
-VALUES (
-     'Connection', 'ADIG', 'VPE', 'true', 'VNF', 'true',
-    '1', '200', '200');	
-    
-INSERT INTO RANGE_RULE (
-     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-     'cust-vlan-id', 'ADIG', 'VPE', 'VNF', 'true', '2-1000');
-	
-INSERT INTO RANGE_RULE (
-     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-     'vlan-id-inner', 'ADIG', 'VPE', 'VNF', 'true', '1002-2000');	    
-
-     
-INSERT INTO RANGE_RULE (
-     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-     'vlan-id-outer', 'MY-SERV-MODEL', 'VPE-Cust', 'Site', 'true', '2-1000');
-	
-INSERT INTO RANGE_RULE (
-     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-     'vlan-id-filter', 'MY-SERV-MODEL', 'VPE-Core1', 'Site', 'true', '1002-2000');	 
-     
-INSERT INTO RANGE_RULE (
-     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-     'vlan-id-filter', 'MY-SERV-MODEL', 'VPE-Core2', 'Site', 'true', '1002-2000,2200-4000');
-     
-INSERT INTO RANGE_RULE (
-     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
-VALUES (
-     'vlan-id-filter', 'MY-SERV-MODEL', 'VPE-Core3', 'Site', 'true', '400-600');     
-     
\ No newline at end of file