Migrate sli-adaptor files

Migrate sli-adaptor repo files into
a new "adaptors" directory.

Signed-off-by: Jessica Wagantall <jwagantall@linuxfoundation.org>

4 files changed, 560 insertions, 0 deletions

diff --git a/adaptors/resource-assignment/provider/src/test/resources/log4j.properties b/adaptors/resource-assignment/provider/src/test/resources/log4j.properties
new file mode 100644
index 000000000..34dcdfb68
--- /dev/null
+++ b/adaptors/resource-assignment/provider/src/test/resources/log4j.properties
@@ -0,0 +1,26 @@
+###
+# ============LICENSE_START=======================================================
+# openECOMP : SDN-C
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+#                         reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+log4j.rootLogger=INFO, A1
+log4j.appender.A1=org.apache.log4j.ConsoleAppender
+log4j.appender.A1.layout=org.apache.log4j.PatternLayout
+log4j.appender.A1.layout.ConversionPattern=%d{ISO8601} %5p %t %X{UUID} %c{3}:%L - %m%n
+log4j.logger.org.hibernate=INFO
diff --git a/adaptors/resource-assignment/provider/src/test/resources/sql/data.sql b/adaptors/resource-assignment/provider/src/test/resources/sql/data.sql
new file mode 100644
index 000000000..236a16d18
--- /dev/null
+++ b/adaptors/resource-assignment/provider/src/test/resources/sql/data.sql
@@ -0,0 +1,180 @@
+---
+-- ============LICENSE_START=======================================================
+-- openECOMP : SDN-C
+-- ================================================================================
+-- Copyright (C) 2017 AT&T Intellectual Property. All rights
+--                         reserved.
+-- ================================================================================
+-- Licensed under the Apache License, Version 2.0 (the "License");
+-- you may not use this file except in compliance with the License.
+-- You may obtain a copy of the License at
+-- 
+--      http://www.apache.org/licenses/LICENSE-2.0
+-- 
+-- Unless required by applicable law or agreed to in writing, software
+-- distributed under the License is distributed on an "AS IS" BASIS,
+-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+-- See the License for the specific language governing permissions and
+-- limitations under the License.
+-- ============LICENSE_END=========================================================
+---
+
+INSERT INTO RESOURCE_RULE (
+    resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
+    allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+    'Bandwidth', 'L3SDN', 'IPAG-TOA', 'true', 'Port', 'true',
+    'service-speed-kbps', '0.5 * max-port-speed', '0.9 * max-port-speed');
+
+INSERT INTO RESOURCE_RULE (
+    resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
+    allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+    'Bandwidth', 'L3SDN', 'VCE-Cust', 'true', 'Server', 'true',
+    'service-speed-kbps', '0.6 * max-server-speed * number-primary-servers', 'max-server-speed * number-primary-servers');
+
+INSERT INTO RESOURCE_RULE (
+  resource_name, service_model, end_point_position, service_expression, equipment_level,
+    equipment_expression, allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+  'Connection', 'L3SDN', 'VCE-Cust', 'true', 'Server',
+    'true', '1', '40', '40');
+
+INSERT INTO RESOURCE_RULE (
+     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
+    allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+     'Bandwidth', 'L3SDN', 'VPE-Cust', 'true', 'Port', 'true',
+    'service-speed-kbps', '0.5 * max-port-speed', '0.9 * max-port-speed');
+
+INSERT INTO RESOURCE_RULE (
+  resource_name, service_model, end_point_position, service_expression,
+    equipment_level, equipment_expression, allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+  'Bandwidth', 'L3AVPN-EVC', 'VPE-Cust', 'true', 'Port', 'true', 'service-speed-kbps', '8000000', '8000000');
+
+INSERT INTO RESOURCE_RULE (
+  resource_name, service_model, end_point_position, service_expression,
+    equipment_level, equipment_expression, allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+  'Connection', 'L3AVPN-EVC', 'VPE-Cust', 'true', 'Port', 'true', '1', '200', '200');
+
+INSERT INTO RESOURCE_RULE (
+  resource_name, service_model, end_point_position, service_expression,
+    equipment_level, equipment_expression, allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+  'Bandwidth', 'L3AVPN-PORT', 'VPE-Cust', 'true', 'Port', 'true', 'service-speed-kbps', '8000000', '8000000');
+
+insert into RESOURCE_THRESHOLD (
+  resource_rule_id, threshold_expression, threshold_message)
+values (
+  (select resource_rule_id from RESOURCE_RULE where resource_name = 'Bandwidth' and equipment_level = 'Server'),
+    '0.5 * max-server-speed * number-primary-servers',
+    'The provisioned access bandwidth is at or exceeds 50% of the total server capacity.');
+
+insert into RESOURCE_THRESHOLD (
+  resource_rule_id, threshold_expression, threshold_message)
+values (
+  (select resource_rule_id from RESOURCE_RULE where resource_name = 'Bandwidth' and equipment_level = 'Server'),
+    '0.7 * max-server-speed * number-primary-servers',
+    'The provisioned access bandwidth is at or exceeds 70% of the total server capacity.');
+
+INSERT INTO RANGE_RULE (
+  range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+  'subinterface-id', 'L3AVPN-EVC', 'VPE-Cust', 'Port', 'true', '100-3999');
+
+INSERT INTO RANGE_RULE (
+  range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+  'vlan-id-inner', 'L3AVPN-EVC', 'VPE-Cust', 'Port', 'true', '2-4091');
+
+INSERT INTO RANGE_RULE (
+  range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+  'bundle-id', 'L3AVPN-PORT', 'VPE-Cust', 'Port', 'true', '1-99999');
+
+INSERT INTO MAX_PORT_SPEED (
+     image_file_name, end_point_position, interface_name, max_speed, unit)
+VALUES (
+     'JUNIPER_VPE_IMAGE_FILENAME', 'VPE-Cust', 'ae0', 5000, 'Mpbs');
+
+INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
+VALUES ('ALL', 5, 1600, 'Mbps', 'Max speed, when there are <=5 EVC on server');
+
+INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
+VALUES ('ALL', 10, 1400, 'Mbps', 'Max speed, when there are 6 to 10 (including 10) EVC on server');
+
+INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
+VALUES ('ALL', 15, 1000, 'Mbps', 'Max speed, when there are 11 to 15 (including 15) EVC on server');
+
+INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
+VALUES ('ALL', 20, 700, 'Mbps', 'Max speed, when there are 16 to 20 (including 20) EVC on server');
+
+INSERT INTO MAX_SERVER_SPEED (server_model, evc_count, max_speed, unit, description)
+VALUES ('ALL', 10000, 500, 'Mbps', 'Max speed, when there are 21 or more EVC on server');
+
+INSERT INTO PARAMETERS (name, value, category, memo)
+VALUES ('homing.pserver.sparing.ratio', '1:1', 'homing',
+  'Ratio of primary to backup servers within any of the AIC sites. Used in RA to calculate the max allowed bw in an AIC site.');
+
+INSERT INTO RESOURCE_RULE (
+     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
+    allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+     'PortBandwidth', 'ADIG', 'VPE', 'true', 'Port', 'true',
+    'service-speed-mbps', 'service-speed-mbps', 'service-speed-mbps');
+    
+INSERT INTO RESOURCE_RULE (
+     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
+    allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+     'Bandwidth', 'ADIG', 'VPE', 'true', 'VNF', 'vnf-type = "VPE"',
+    'service-speed-mbps', '0.5 * max-vpe-bandwidth-mbps', '0.9 * max-vpe-bandwidth-mbps');
+	
+	
+INSERT INTO RESOURCE_RULE (
+     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
+    allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+     'Bandwidth', 'ADIG', 'VPE', 'true', 'AffinityLink', 'true',
+    'service-speed-mbps', '9999999999', '9999999999');
+	
+INSERT INTO RESOURCE_RULE (
+     resource_name, service_model, end_point_position, service_expression, equipment_level, equipment_expression,
+    allocation_expression, soft_limit_expression, hard_limit_expression)
+VALUES (
+     'Connection', 'ADIG', 'VPE', 'true', 'VNF', 'true',
+    '1', '200', '200');	
+    
+INSERT INTO RANGE_RULE (
+     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+     'cust-vlan-id', 'ADIG', 'VPE', 'VNF', 'true', '2-1000');
+	
+INSERT INTO RANGE_RULE (
+     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+     'vlan-id-inner', 'ADIG', 'VPE', 'VNF', 'true', '1002-2000');	    
+
+     
+INSERT INTO RANGE_RULE (
+     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+     'vlan-id-outer', 'MY-SERV-MODEL', 'VPE-Cust', 'Site', 'true', '2-1000');
+	
+INSERT INTO RANGE_RULE (
+     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+     'vlan-id-filter', 'MY-SERV-MODEL', 'VPE-Core1', 'Site', 'true', '1002-2000');	 
+     
+INSERT INTO RANGE_RULE (
+     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+     'vlan-id-filter', 'MY-SERV-MODEL', 'VPE-Core2', 'Site', 'true', '1002-2000,2200-4000');
+     
+INSERT INTO RANGE_RULE (
+     range_name, service_model, end_point_position, equipment_level, equipment_expression, ranges)
+VALUES (
+     'vlan-id-filter', 'MY-SERV-MODEL', 'VPE-Core3', 'Site', 'true', '400-600');     
+     
\ No newline at end of file
diff --git a/adaptors/resource-assignment/provider/src/test/resources/sql/schema.sql b/adaptors/resource-assignment/provider/src/test/resources/sql/schema.sql
new file mode 100644
index 000000000..275337e44
--- /dev/null
+++ b/adaptors/resource-assignment/provider/src/test/resources/sql/schema.sql
@@ -0,0 +1,201 @@
+---
+-- ============LICENSE_START=======================================================
+-- openECOMP : SDN-C
+-- ================================================================================
+-- Copyright (C) 2017 AT&T Intellectual Property. All rights
+--                         reserved.
+-- ================================================================================
+-- Licensed under the Apache License, Version 2.0 (the "License");
+-- you may not use this file except in compliance with the License.
+-- You may obtain a copy of the License at
+-- 
+--      http://www.apache.org/licenses/LICENSE-2.0
+-- 
+-- Unless required by applicable law or agreed to in writing, software
+-- distributed under the License is distributed on an "AS IS" BASIS,
+-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+-- See the License for the specific language governing permissions and
+-- limitations under the License.
+-- ============LICENSE_END=========================================================
+---
+
+CREATE TABLE RESOURCE_LOCK (
+  resource_lock_id SERIAL PRIMARY KEY,
+  resource_name VARCHAR(50) NOT NULL UNIQUE,
+  lock_holder VARCHAR(100) NOT NULL,
+  lock_count SMALLINT NOT NULL,
+  lock_time DATETIME NOT NULL,
+  expiration_time DATETIME NOT NULL
+);
+
+CREATE TABLE RESOURCE (
+    resource_id SERIAL PRIMARY KEY,
+    asset_id VARCHAR(50) NOT NULL,
+    resource_name VARCHAR(50) NOT NULL,
+    resource_type VARCHAR(10) NOT NULL,
+    lt_used BIGINT,
+    ll_label VARCHAR(50),
+    ll_reference_count SMALLINT,
+    rr_used VARCHAR(4000)
+);
+
+ALTER TABLE RESOURCE ADD CONSTRAINT c1_resource CHECK (resource_type IN ('Limit', 'Label', 'Range'));
+CREATE UNIQUE INDEX ak1_resource ON RESOURCE (asset_id, resource_name);
+
+CREATE TABLE RESOURCE_LOAD (
+    resource_load_id SERIAL PRIMARY KEY,
+    resource_id BIGINT NOT NULL REFERENCES resource (resource_id),
+    application_id VARCHAR(20) NOT NULL,
+    resource_load_time DATETIME NOT NULL,
+    resource_expiration_time DATETIME
+);
+
+CREATE INDEX i1_resource_load ON RESOURCE_LOAD (resource_id);
+CREATE UNIQUE INDEX ak1_resource_load ON RESOURCE_LOAD (resource_id, application_id);
+
+CREATE TABLE ALLOCATION_ITEM (
+    allocation_item_id SERIAL PRIMARY KEY,
+    resource_id BIGINT NOT NULL REFERENCES resource (resource_id),
+    application_id VARCHAR(50) NOT NULL,
+    resource_set_id VARCHAR(50) NOT NULL,
+    resource_union_id VARCHAR(50) NOT NULL,
+    resource_share_group_list VARCHAR(200),
+    lt_used BIGINT,
+    ll_label VARCHAR(50),
+    rr_used VARCHAR(200),
+    allocation_time DATETIME NOT NULL
+);
+
+CREATE INDEX i1_allocation_item ON allocation_item (resource_id);
+CREATE UNIQUE INDEX ak1_allocation_item ON allocation_item (resource_id, resource_set_id);
+
+CREATE TABLE RESOURCE_RULE (
+  resource_rule_id SERIAL PRIMARY KEY,
+  resource_name VARCHAR(50) NOT NULL,
+  service_model VARCHAR(50) NOT NULL,
+  end_point_position VARCHAR(50) NOT NULL,
+  service_expression VARCHAR(2000) NOT NULL,
+  equipment_level VARCHAR(50) NOT NULL,
+  equipment_expression VARCHAR(2000) NOT NULL,
+  allocation_expression VARCHAR(2000) NOT NULL,
+  soft_limit_expression VARCHAR(2000) NOT NULL,
+  hard_limit_expression VARCHAR(2000) NOT NULL
+);
+
+CREATE TABLE RESOURCE_THRESHOLD (
+  resource_threshold_id bigint(20) unsigned NOT NULL AUTO_INCREMENT,
+  resource_rule_id bigint(20) NOT NULL,
+  threshold_expression varchar(2000) NOT NULL,
+  threshold_message varchar(2000) NOT NULL,
+  PRIMARY KEY (resource_threshold_id)
+);
+
+CREATE TABLE RANGE_RULE (
+  range_rule_id SERIAL PRIMARY KEY,
+  range_name VARCHAR(50) NOT NULL,
+  service_model VARCHAR(50) NOT NULL,
+  end_point_position VARCHAR(50) NOT NULL,
+  equipment_level VARCHAR(50) NOT NULL,
+  equipment_expression VARCHAR(2000) NOT NULL,
+  ranges VARCHAR(100) NOT NULL
+);
+
+CREATE TABLE MAX_PORT_SPEED (
+  max_port_speed_id SERIAL PRIMARY KEY,
+  image_file_name VARCHAR(50) NOT NULL,
+  end_point_position VARCHAR(50) NOT NULL,
+  interface_name VARCHAR(100) NOT NULL,
+  max_speed BIGINT NOT NULL,
+  unit VARCHAR(10) NOT NULL
+);
+
+CREATE TABLE MAX_SERVER_SPEED (
+  max_server_speed_id SERIAL PRIMARY KEY,
+  server_model VARCHAR(50) NOT NULL,
+  evc_count SMALLINT NOT NULL,
+  max_speed BIGINT NOT NULL,
+  unit VARCHAR(10) NOT NULL,
+  description VARCHAR(500)
+);
+
+CREATE TABLE SERVICE_RESOURCE (
+  service_resource_id SERIAL PRIMARY KEY,
+  service_instance_id VARCHAR(80) NOT NULL,
+  service_status VARCHAR(10) NOT NULL,
+  service_change_number SMALLINT NOT NULL,
+    resource_set_id VARCHAR(100) NOT NULL,
+    resource_union_id VARCHAR(100) NOT NULL
+);
+
+ALTER TABLE SERVICE_RESOURCE ADD CONSTRAINT C1_SERVICE_RESOURCE CHECK (service_status IN ('Active', 'Pending'));
+CREATE INDEX i1_service_resource ON SERVICE_RESOURCE (service_instance_id);
+CREATE UNIQUE INDEX ak1_service_resource ON SERVICE_RESOURCE (service_instance_id, service_change_number);
+
+CREATE TABLE VPE_POOL (
+  vpe_name VARCHAR(20) NOT NULL,
+  ipv4_oam_address VARCHAR(20) NOT NULL,
+  loopback0_ipv4_address VARCHAR(20) NOT NULL,
+  provisioning_status VARCHAR(10) NOT NULL,
+  aic_site_id VARCHAR(100) NOT NULL,
+  availability_zone VARCHAR(100) NOT NULL,
+  vlan_id_outer VARCHAR(20) NOT NULL,
+  vendor VARCHAR(20) NOT NULL,
+  physical_intf_name VARCHAR(40) NOT NULL,
+  physical_intf_speed VARCHAR(20) NOT NULL,
+  physical_intf_units VARCHAR(20) NOT NULL,
+  vpe_uuid VARCHAR(80) DEFAULT NULL,
+  vpe_id VARCHAR(80) DEFAULT NULL,
+  image_filename VARCHAR(100) DEFAULT NULL,
+  PRIMARY KEY (aic_site_id, vpe_name, availability_zone)
+);
+
+CREATE TABLE VPLSPE_POOL (
+  vplspe_name varchar(20) NOT NULL,
+  aic_site_id varchar(100) NOT NULL,
+  availability_zone varchar(100) NOT NULL,
+  physical_intf_name varchar(40) NOT NULL,
+  physical_intf_speed varchar(20) NOT NULL,
+  physical_intf_units varchar(20) NOT NULL,
+  loopback0_ipv4_address varchar(20) NOT NULL,
+  vlan_id_outer varchar(20) NOT NULL,
+  vplspe_uuid varchar(80) DEFAULT NULL,
+  image_filename varchar(100) DEFAULT NULL,
+  provisioning_status varchar(10) DEFAULT NULL,
+  vendor varchar(20) DEFAULT NULL,
+  PRIMARY KEY (vplspe_name, aic_site_id, availability_zone, physical_intf_name)
+);
+
+CREATE TABLE VPE_LOCK (
+  vpe_name varchar(20) NOT NULL,
+  vpn_lock varchar(20) NOT NULL,
+  PRIMARY KEY (vpe_name)
+);
+
+CREATE TABLE PARAMETERS (
+  name varchar(100) PRIMARY KEY,
+  value varchar(24) NOT NULL,
+  category varchar(24) NOT NULL,
+  memo varchar(128)
+);
+
+CREATE TABLE PSERVER (
+  hostname varchar(255) NOT NULL,
+  ptnii_equip_name varchar(255),
+  number_of_cpus varchar(255),
+  disk_in_gigabytes varchar(255),
+  ram_in_megabytes varchar(255),
+  equip_type varchar(255),
+  equip_vendor varchar(255),
+  equip_model varchar(255),
+  fqdn varchar(255),
+  pserver_selflink varchar(255),
+  ipv4_oam_address varchar(15),
+  serial_number varchar(255),
+  pserver_id varchar(255),
+  internet_topology varchar(40),
+  aic_site_id varchar(100),
+  in_maint varchar(5),
+  pserver_name2 varchar(255),
+  purpose varchar(255),
+  PRIMARY KEY (hostname)
+);
diff --git a/adaptors/resource-assignment/provider/src/test/resources/test-context.xml b/adaptors/resource-assignment/provider/src/test/resources/test-context.xml
new file mode 100644
index 000000000..ecebec723
--- /dev/null
+++ b/adaptors/resource-assignment/provider/src/test/resources/test-context.xml
@@ -0,0 +1,153 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ============LICENSE_START=======================================================
+  openECOMP : SDN-C
+  ================================================================================
+  Copyright (C) 2017 AT&T Intellectual Property. All rights
+  						reserved.
+  ================================================================================
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+  
+       http://www.apache.org/licenses/LICENSE-2.0
+  
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+  ============LICENSE_END=========================================================
+  -->
+
+<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+    xmlns:jdbc="http://www.springframework.org/schema/jdbc"
+    xmlns:context="http://www.springframework.org/schema/context"
+    xsi:schemaLocation="http://www.springframework.org/schema/beans
+	http://www.springframework.org/schema/beans/spring-beans-3.1.xsd
+	http://www.springframework.org/schema/jdbc
+ 	http://www.springframework.org/schema/jdbc/spring-jdbc-3.1.xsd
+ 	http://www.springframework.org/schema/context
+ 	http://www.springframework.org/schema/context/spring-context-3.1.xsd
+ 					">
+
+    <context:annotation-config />
+
+	<!-- JDBC setup -->
+
+    <bean id="test.dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource"
+        lazy-init="false" primary="true">
+        <property name="driverClassName" value="org.h2.Driver" />
+        <property name="url" value="jdbc:h2:mem:test;DB_CLOSE_DELAY=-1;MODE=MySQL" />
+    </bean>
+
+    <jdbc:initialize-database data-source="test.dataSource">
+        <jdbc:script location="sql/schema.sql" />
+        <jdbc:script location="sql/data.sql" />
+    </jdbc:initialize-database>
+
+    <bean id="lock.dataSource" class="org.onap.ccsdk.sli.adaptors.util.db.CachedDataSourceWrap">
+        <property name="dataSource" ref="test.dataSource" />
+    </bean>
+
+    <bean id="rm.jdbcTemplate" class="org.springframework.jdbc.core.JdbcTemplate" primary="true">
+        <property name="dataSource" ref="test.dataSource" />
+    </bean>
+
+    <bean id="lock.jdbcTemplate" class="org.springframework.jdbc.core.JdbcTemplate">
+        <property name="dataSource" ref="lock.dataSource" />
+    </bean>
+
+    <bean id="testDb" class="jtest.util.org.onap.ccsdk.sli.adaptors.ra.TestDb">
+        <property name="jdbcTemplate" ref="rm.jdbcTemplate" />
+    </bean>
+
+    <bean id="dataSetup" class="jtest.org.onap.ccsdk.sli.adaptors.ra.DataSetup">
+        <property name="testDb" ref="testDb" />
+    </bean>
+
+	<!-- Resource Lock Configuration -->
+
+    <bean id="resourceLockDao" class="org.onap.ccsdk.sli.adaptors.lock.dao.ResourceLockDaoImpl">
+        <property name="jdbcTemplate" ref="lock.jdbcTemplate" />
+    </bean>
+
+    <bean id="lockHelper" class="org.onap.ccsdk.sli.adaptors.lock.comp.LockHelperImpl">
+        <property name="resourceLockDao" ref="resourceLockDao" />
+        <property name="retryCount" value="10" />
+        <property name="lockWait" value="5" /> <!-- Seconds -->
+    </bean>
+
+	<!-- RM Configuration -->
+
+    <bean id="resourceJdbcDao" class="org.onap.ccsdk.sli.adaptors.rm.dao.jdbc.ResourceJdbcDaoImpl">
+        <property name="jdbcTemplate" ref="rm.jdbcTemplate" />
+    </bean>
+
+    <bean id="allocationItemJdbcDao" class="org.onap.ccsdk.sli.adaptors.rm.dao.jdbc.AllocationItemJdbcDaoImpl">
+        <property name="jdbcTemplate" ref="rm.jdbcTemplate" />
+    </bean>
+
+    <bean id="resourceLoadJdbcDao" class="org.onap.ccsdk.sli.adaptors.rm.dao.jdbc.ResourceLoadJdbcDaoImpl">
+        <property name="jdbcTemplate" ref="rm.jdbcTemplate" />
+    </bean>
+
+    <bean id="resourceDao" class="org.onap.ccsdk.sli.adaptors.rm.dao.jdbc.ResourceDaoImpl">
+        <property name="resourceJdbcDao" ref="resourceJdbcDao" />
+        <property name="allocationItemJdbcDao" ref="allocationItemJdbcDao" />
+        <property name="resourceLoadJdbcDao" ref="resourceLoadJdbcDao" />
+    </bean>
+
+    <bean id="resourceManager" class="org.onap.ccsdk.sli.adaptors.rm.comp.ResourceManagerImpl">
+        <property name="lockHelper" ref="lockHelper" />
+        <property name="resourceDao" ref="resourceDao" />
+        <property name="lockTimeout" value="600" /> <!-- Seconds -->
+    </bean>
+
+	<!-- Rule DAO Configuration -->
+
+    <bean id="resourceRuleDao" class="org.onap.ccsdk.sli.adaptors.ra.rule.dao.ResourceRuleDaoImpl">
+        <property name="jdbcTemplate" ref="rm.jdbcTemplate" />
+    </bean>
+
+    <bean id="rangeRuleDao" class="org.onap.ccsdk.sli.adaptors.ra.rule.dao.RangeRuleDaoImpl">
+        <property name="jdbcTemplate" ref="rm.jdbcTemplate" />
+    </bean>
+
+	<!-- ResourceAllocator Configuration -->
+
+    <bean id="resourceAllocator" class="org.onap.ccsdk.sli.adaptors.ra.ResourceAllocator">
+        <property name="resourceManager" ref="resourceManager" />
+        <property name="endPointAllocator" ref="endPointAllocator" />
+        <property name="speedUtil" ref="speedUtil" />
+    </bean>
+
+	<bean id="resourceLockNode" class="org.onap.ccsdk.sli.adaptors.ra.ResourceLockNode">
+		<property name="lockHelper" ref="lockHelper" />
+	</bean>
+
+    <bean id="speedUtil" class="org.onap.ccsdk.sli.adaptors.util.speed.SpeedUtil" />
+
+	<!-- EndPointAllocator Configuration -->
+
+    <bean id="endPointAllocator" class="org.onap.ccsdk.sli.adaptors.ra.comp.EndPointAllocatorImpl">
+        <property name="resourceManager" ref="resourceManager" />
+        <property name="allocationRuleMap">
+            <map>
+                <entry key="DEFAULT">
+                    <list>
+                        <ref bean="dbAllocationRule" />
+                    </list>
+                </entry>
+            </map>
+        </property>
+    </bean>
+
+	<!-- Resource Allocation Rule Configuration -->
+
+    <bean id="dbAllocationRule" class="org.onap.ccsdk.sli.adaptors.ra.alloc.DbAllocationRule">
+        <property name="resourceRuleDao" ref="resourceRuleDao" />
+        <property name="rangeRuleDao" ref="rangeRuleDao" />
+    </bean>
+
+</beans>