Merge "Remove unmaintained ansible-example-server"

8 files changed, 0 insertions, 1874 deletions

diff --git a/ansible-adapter/ansible-example-server/AnsibleModule.py b/ansible-adapter/ansible-example-server/AnsibleModule.py
deleted file mode 100644
index 3458c28b..00000000
--- a/ansible-adapter/ansible-example-server/AnsibleModule.py
+++ /dev/null
@@ -1,170 +0,0 @@
-'''
-/*-
-* ============LICENSE_START=======================================================
-* ONAP : APPC
-* ================================================================================
-* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
-* ================================================================================
-* Copyright (C) 2017 Amdocs
-* =============================================================================
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*      http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-* 
-* ECOMP is a trademark and service mark of AT&T Intellectual Property.
-* ============LICENSE_END=========================================================
-*/
-'''
-
-import os, subprocess
-import sys
-from collections import namedtuple
-import json
-
-import uuid
-
-def ansibleSysCall (inventory_path, playbook_path, nodelist, mandatory,
-                    envparameters, localparameters, lcm, timeout):
-
-    print "***> in AnsibleModule.ansibleSysCall"
-    print "   EnvParameters:  ", envparameters
-    print "   LocalParameters:", localparameters
-    print "   Inventory:      ", inventory_path
-    print "   Playbook:       ", playbook_path
-    print "   NodeList:       ", nodelist
-    print "   Mandatory:      ", mandatory
-    print "   Timeout:        ", timeout
-    log = []
-
-    str_parameters = ''
-                
-    if not envparameters == {}:
-        for key in envparameters:
-            if str_parameters == '':
-                str_parameters = '"'  + str(key) + '=\'' + str(envparameters[key])  + '\''
-            else:
-                str_parameters += ' '  + str(key) + '=\'' + str(envparameters[key])  + '\''
-        str_parameters += '"'
-                        
-    if len(str_parameters) > 0:
-        cmd = 'timeout --signal=KILL ' + str(timeout) + \
-              ' ansible-playbook -v --extra-vars ' + str_parameters + ' -i ' + \
-              inventory_path + ' ' + playbook_path
-    else:
-        cmd = 'timeout --signal=KILL ' + str(timeout) + \
-              ' ansible-playbook -v -i ' + inventory_path + ' ' + playbook_path
-
-    print "   CMD:            ", cmd
-
-    print "\n =================ANSIBLE STDOUT BEGIN============================================\n"
-    p = subprocess.Popen(cmd, shell=True,
-                         stdout=subprocess.PIPE,
-                         stderr=subprocess.STDOUT) 
-    # p.wait()
-    (stdout_value, err) = p.communicate()
-    
-    stdout_value_cleanup = ''
-    for line in stdout_value:
-        stdout_value_cleanup += line.replace('  ', ' ')
-    stdout_value = stdout_value_cleanup.splitlines() 
-
-    ParseFlag = False
-    retval = {}
-    returncode = p.returncode
-
-    if returncode == 137:
-        
-        print "   ansible-playbook system call timed out"
-        # ansible-playbook system call timed out
-        for line in stdout_value: # p.stdout.readlines():
-            log.append (line)
-            
-            
-    elif 'ping' in lcm:
-
-        targetnode = envparameters['TargetNode'].split(' ')
-        str_json = None
-        for line in stdout_value: # p.stdout.readlines():
-            print line # line,
-            if "PLAY RECAP" in line:
-                ParseFlag = False
-            if ParseFlag and len(line.strip())>0:
-                str_json += line.strip()
-            if "TASK [debug]" in line:
-                ParseFlag = True
-                str_json = ''
-            log.append (line)
-
-        if str_json:
-            if '=>' in str_json:
-                out_json =eval(str_json.split('=>')[1].replace('true','True').replace('false','False'))
-
-                if 'ping.stdout_lines' in out_json:
-                    for node in targetnode:
-                        ip_address = node
-                        ok_flag = '0'
-                        changed_flag = '0'
-                        unreachable_flag = '0'
-                        failed_flag = '1'
-                        for rec in out_json['ping.stdout_lines']:
-                            if node in rec and "is alive" in rec:
-                                ok_flag = '1'
-                                changed_flag = '1'
-                                unreachable_flag = '0'
-                                failed_flag = '0'
-                        for rec in out_json['ping.stdout_lines']:
-                            if node in rec and "address not found" in rec:
-                                ok_flag = '0'
-                                changed_flag = '0'
-                                unreachable_flag = '1'
-                                failed_flag = '0'
-                        retval[ip_address]=[ok_flag, changed_flag, unreachable_flag,
-                                            failed_flag]
-    else:
-            
-        for line in stdout_value: # p.stdout.readlines():
-            print line # line,
-            if ParseFlag and len(line.strip())>0:
-                ip_address = line.split(':')[0].strip()
-                ok_flag = line.split(':')[1].strip().split('=')[1].split('changed')[0].strip()
-                changed_flag = line.split(':')[1].strip().split('=')[2].split('unreachable')[0].strip()
-                unreachable_flag = line.split(':')[1].strip().split('=')[3].split('failed')[0].strip()
-                failed_flag = line.split(':')[1].strip().split('=')[4].strip()
-                retval[ip_address]=[ok_flag, changed_flag, unreachable_flag, failed_flag]
-            if "PLAY RECAP" in line:
-                ParseFlag = True
-            log.append (line)
-        
-    # retval['p'] = p.wait()
-
-    print " =================ANSIBLE STDOUT END==============================================\n"
-
-    return retval, log, returncode
-
-if __name__ == '__main__':
-
-    from multiprocessing import Process, Value, Array, Manager
-    import time
-
-    nodelist = 'host'
-
-    playbook_file = 'ansible_sleep@0.00.yml'
-
-
-    d = Manager().dict()
-    
-    p = Process(nodelist=ansible_call, args=('ansible_module_config', playbook_file, nodelist,d, ))
-    p.start()
-
-    print "Process running"
-    print d
-    p.join()
-    print d
diff --git a/ansible-adapter/ansible-example-server/AnsibleSql.py b/ansible-adapter/ansible-example-server/AnsibleSql.py
deleted file mode 100644
index ab58a96c..00000000
--- a/ansible-adapter/ansible-example-server/AnsibleSql.py
+++ /dev/null
@@ -1,322 +0,0 @@
-'''
-/*-
-* ============LICENSE_START=======================================================
-* ONAP : APPC
-* ================================================================================
-* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
-* ================================================================================
-* Copyright (C) 2017 Amdocs
-* =============================================================================
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*      http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-* 
-* ECOMP is a trademark and service mark of AT&T Intellectual Property.
-* ============LICENSE_END=========================================================
-*/
-'''
-
-import pymysql, sys
-from os import listdir
-from os.path import isfile, join
-
-class mySql():
-    
-    def __init__(self, myhost, myuser, mypasswd, mydb):
-        self.con = True
-        self.error = ''
-        self.db = None
-        try:
-            self.db = pymysql.connect(host=myhost,
-                                      user=myuser,
-                                      passwd=mypasswd,
-                                      db=mydb)
-            self.cur = self.db.cursor()
-        except Exception as e:
-            self.error = e[1]
-            self.con = False
-
-    def Query (self, myquery, val = None):
-        results = None
-        try:
-            if val:
-                self.cur.execute(myquery, val)
-            else:
-                self.cur.execute(myquery)
-            self.db.commit()
-            results = self.cur.fetchall()
-        except Exception, e:
-            results = repr(e)
-        return results
-    
-    def Close (self):
-        if self.db:
-            self.db.close()
-
-def loadPlaybook (sqlintf, value, version, ext = '.yml'):
-
-    errorCode = 0
-    diag = ''
-    
-    # Test if primary key already defined
-    query = "SELECT name FROM playbook WHERE name='" + value +"'"
-    results = sqlintf.Query (query)
-    if len(results) > 0:
-        pass
-    else:
-        query = "INSERT INTO playbook (name) VALUES ('" + value + "')"
-        results = sqlintf.Query (query)
-        if len(results) > 0:
-            errorCode = 1
-            diag = results
-
-    # Load playbook
-    file = open(playbook_path + value + ext, 'r')
-    load_file = file.read()
-        
-    if not errorCode:
-        sql = "UPDATE playbook SET value=%s, version=%s, type=%s WHERE name=%s"
-
-        results = sqlintf.Query(sql, (load_file, version, ext, value))
-
-        if len (results) > 0:
-            # Error loading playbook
-            errorCode = 1
-            diag = results
-
-    return errorCode, diag
-
-def loadCredentials (sqlintf, hostgroup, hostname, cred):
-    errorCode = 0
-    diag = ''
-    
-    # Load credentials
-
-    query = "SELECT hostname,hostgroup FROM inventory WHERE hostname='" + hostname +"'"
-    results = sqlintf.Query (query)
-
-    if hostname in str (results):
-
-        results_hostgroups = results[0][1]
-        
-        if hostgroup in results_hostgroups.split(','):
-            query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\
-                    cred +\
-                    "' WHERE hostname='" + hostname + "'"
-        else:
-
-            results_hostgroups = results_hostgroups + ',' + hostgroup
-            
-            query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\
-                    cred + "',hostgroup='" + results_hostgroups + \
-                    "' WHERE hostname='" + hostname + "'"
-                        
-        results = sqlintf.Query (query)
-        
-    else:
-        
-        query = "INSERT INTO inventory (hostgroup, hostname, credentials) VALUES ('" + \
-                hostgroup + "','" + hostname + "','" + cred + "')"
-        results = sqlintf.Query (query)
-
-    if len (results) > 0:
-        # Error loading playbook
-        errorCode = 1
-        diag = results
-
-    return errorCode, diag
-    
-
-def readPlaybook (sqlintf, value, version=None):
-
-    errorCode = 0
-    diag = ''
-
-    print "***> in AnsibleSql.readPlaybook"
-    
-    if not version:
-        query = "SELECT MAX(version) FROM playbook WHERE name like'" + value + "%'"
-        print "   Query:", query
-        results = sqlintf.Query (query)
-        version = results[0][0]
-
-    print "   Provided playbook name:", value 
-    print "   Used version:", version
-
-    results = []
-    if version:
-        query = "SELECT value,type FROM playbook WHERE name='" + value + "@" + version + "'"
-        results = sqlintf.Query (query)
-
-        print "Query:", query
-        print "Results:", results
-    
-    if len(results) == 0:
-        errorCode = 1
-    else:
-        if len(results[0]) == 0:
-            errorCode = 1
-            diag = results[0]
-        else:
-            diag = results[0]
-
-    return value, version, errorCode, diag
-
-def readCredentials (sqlintf, tag):
-    errorCode = []
-    diag = []
-
-    print "***> in AnsibleSql.readCredential"
-    
-    # Load credentials
-
-    for rec in tag:
-
-        # Try hostgroup
-        query = "SELECT hostgroup, hostname, credentials FROM inventory WHERE hostgroup LIKE '%" + \
-                rec +"%'"
-        query_results = sqlintf.Query (query)
-
-        results = ()
-        for q in query_results:
-            if rec in q[0].split(','):
-                l = list(q)
-                l[0] = rec
-                q = tuple(l)
-                results = (q,) + results
-
-        if len(results) == 0:
-            # Try hostname
-            query = "SELECT hostgroup, hostname, credentials FROM inventory WHERE hostname='" + \
-                    rec +"'"
-            results = sqlintf.Query (query)
-
-        print "   Query:", query
-        print "   Results:", len(results), results
-
-        if len(results) == 0:
-            errorCode = 1
-            hostgroup = rec
-            hostname = rec
-            credentials = 'ansible_connection=ssh ansible_ssh_user=na ansible_ssh_private_key_file=na\n'
-            diag.append([hostgroup, hostname, credentials])
-        else:
-            errorCode = 0
-            for i in range(len (results)):
-                for h in results[i][0].split(','):
-                    hostgroup = h
-                    hostname = results[i][1]
-                    credentials = results[i][2]
-                    diag.append([hostgroup, hostname, credentials])
-
-    return errorCode, diag
-    
-
-if __name__ == '__main__':
-
-    ################################################################
-    # Change below
-    ################################################################
-    host="localhost"                    # your host, usually localhost
-    user="mysql_user_id"                # your username
-    passwd="password_4_mysql_user_id"   # your password
-    db="ansible"                        # name of the data base
-
-    playbook_path = "/home/ubuntu/RestServerOpenSource/"
-    inventory = "/home/ubuntu/RestServerOpenSource/Ansible_inventory"
-    ################################################################
-
-    onlyfiles = [f for f in listdir(playbook_path)
-                 if isfile(join(playbook_path, f))]
-
-    sqlintf = mySql (host, user, passwd, db)
-
-    # Load playbooks
-
-    print "Loading playbooks"
-    for file in onlyfiles:
-        if "yml" in file:
-
-            name = file.split (".yml")[0]
-            print "  Loading:", name
-            version = name.split("@")[1]
-            errorCode, diag = loadPlaybook (sqlintf, name, version, '.yml')
-            if errorCode:
-                print "  Results: Failed - ", diag
-            else:
-                print "  Results: Success"
-
-    print "\nLoading inventory"
-    
-    # Load inventory
-
-    hostgroup = None
-    inv = {}
-    file = open(inventory, 'r')
-
-    for line in file:
-
-        if '[' in line and ']' in line:
-            hostgroup = line.strip().replace('[','').replace(']','')
-            inv[hostgroup] = {}
-        elif hostgroup and len(line.strip())>0:
-            host = line.strip().split(" ")[0]
-            credentials = line.replace(host,"")
-            inv[hostgroup][host] = credentials
-                               
-    file.close()
-
-    for hostgroup in inv:
-        print "  Loading:", hostgroup
-        hostfqdn = ''
-        cred = ''
-        for hostname in inv[hostgroup]:
-            cred = inv[hostgroup][hostname]
-            errorCode, diag = loadCredentials (sqlintf, hostgroup, hostname, cred)
-            if errorCode:
-                print "  Results: Failed - ", diag
-            else:
-                print "  Results: Success"
-                
-    print "\nReading playbook"
-    
-    # Read playbook
-
-    if not sqlintf.con:
-        print "Cannot connect to MySql:", sqlintf.error
-        sys.exit()
-        
-    name = "ansible_sleep"
-    print "Reading playbook:", name
-    value, version, errorCode, diag = readPlaybook (sqlintf, name)
-    if errorCode:
-        print "Results: Failed - ", diag
-    else:
-        print "Results: Success"
-        print value
-        print version
-        print diag
-
-    print "\nReading inventory"
-
-    # Read inventory
-
-    tag = ["your_inventory_test_group_name"]
-    print "Reading inventory tag:", tag
-    errorCode, diag = readCredentials (sqlintf, tag)
-    if errorCode:
-        print "Results: Failed - ", diag
-    else:
-        print "Results: Success"
-        print diag
-                
-    sqlintf.Close()
-
diff --git a/ansible-adapter/ansible-example-server/Ansible_inventory b/ansible-adapter/ansible-example-server/Ansible_inventory
deleted file mode 100644
index 69df84ff..00000000
--- a/ansible-adapter/ansible-example-server/Ansible_inventory
+++ /dev/null
@@ -1,27 +0,0 @@
-# /*-
-# * ============LICENSE_START=======================================================
-# * ONAP : APPC
-# * ================================================================================
-# * Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
-# * ================================================================================
-# * Copyright (C) 2017 Amdocs
-# * =============================================================================
-# * Licensed under the Apache License, Version 2.0 (the "License");
-# * you may not use this file except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.apache.org/licenses/LICENSE-2.0
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# * 
-# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
-# * ============LICENSE_END=========================================================
-# */
-
-[host]
-localhost   ansible_connection=local
-
diff --git a/ansible-adapter/ansible-example-server/LoadAnsibleMySql.py b/ansible-adapter/ansible-example-server/LoadAnsibleMySql.py
deleted file mode 100644
index 0a1c78a6..00000000
--- a/ansible-adapter/ansible-example-server/LoadAnsibleMySql.py
+++ /dev/null
@@ -1,207 +0,0 @@
-'''
-/*-
-* ============LICENSE_START=======================================================
-* ONAP : APPC
-* ================================================================================
-* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
-* ================================================================================
-* Copyright (C) 2017 Amdocs
-* =============================================================================
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*      http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-* 
-* ECOMP is a trademark and service mark of AT&T Intellectual Property.
-* ============LICENSE_END=========================================================
-*/
-'''
-
-#!/usr/bin/python
-import pymysql
-from os import listdir
-from os.path import isfile, join
-
-class mySql():
-    
-    def __init__(self, myhost, myuser, mypasswd, mydb):
-        self.db = pymysql.connect(host=myhost,
-                                  user=myuser,
-                                  passwd=mypasswd,
-                                  db=mydb)
-        self.cur = self.db.cursor()
-
-    def Query (self, myquery, val = None):
-        results = None
-        error = None
-        try:
-            if val:
-                self.cur.execute(myquery, val)
-            else:
-                self.cur.execute(myquery)
-            self.db.commit()
-            results = self.cur.fetchall()
-        except Exception, e:
-            error = str (e)
-        return results, error
-
-    def Close (self):
-        self.db.close()
-
-def loadPlaybook (value, version, ext = '.yml'):
-
-    errorCode = 0
-    diag = ''
-    
-    # Test if primary key already defined
-    query = "SELECT name FROM playbook WHERE name='" + value +"'"
-    results, error = sqlintf.Query (query)
-    if results:
-        # print "Primary key already defined: Updating playbook"
-        pass
-    else:
-        # print "Primary key not defined: Insert new playbook"
-        query = "INSERT INTO playbook (name) VALUES ('" + value + "')"
-        results, error = sqlintf.Query (query)
-        if error:
-            errorCode = 1
-            diag = error
-
-    # Load playbook
-    file = open(playbook_path + value + ext, 'r')
-    load_file = file.read()
-        
-    # Load playbook
-
-    if not errorCode:
-        sql = "UPDATE playbook SET value=%s, version=%s, type=%s WHERE name=%s"
-
-        results, error = sqlintf.Query(sql, (load_file, version, ext, value))
-
-        if error:
-            # Error loading playbook
-            errorCode = 1
-            diag = error
-            
-    return errorCode, diag
-
-def loadCredentials (hostgroup, hostname, cred):
-    errorCode = 0
-    diag = ''
-    
-    # Load credentials
-
-    query = "SELECT hostname,hostgroup FROM inventory WHERE hostname='" + hostname +"'"
-    results = sqlintf.Query (query)
-
-    print '==>', results
-    
-    if hostname in str(results):
-
-        results_hostgroups = results[0][0][1]
-
-        # print "Record already defined: Updating inventory"
-        if hostgroup in results_hostgroups.split(','):
-            query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\
-                    cred +\
-                    "' WHERE hostname='" + hostname + "'"
-        else:
-            
-            results_hostgroups = results_hostgroups + ',' + hostgroup
-
-            query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\
-                    cred + "',hostgroup='" + results_hostgroups + \
-                    "' WHERE hostname='" + hostname + "'"
-
-        results, error = sqlintf.Query (query)
-        
-    else:
-        
-        query = "INSERT INTO inventory (hostgroup, hostname, credentials) VALUES ('" + \
-                hostgroup + "','" + hostname + "','" + cred + "')"
-        results, error = sqlintf.Query (query)
-
-    if error:
-        # Error loading credentials
-        errorCode = 1
-        diag = results
-
-    return errorCode, diag
-    
-
-if __name__ == '__main__':
-
-    ################################################################
-    # Change below
-    ################################################################
-    host="localhost"                    # your host, usually localhost
-    user="mysql_user_id"                # your username
-    passwd="password_4_mysql_user_id"   # your password
-    db="ansible"                        # name of the data base
-
-    playbook_path = "/home/ubuntu/RestServerOpenSource/"
-    inventory = "/home/ubuntu/RestServerOpenSource/Ansible_inventory"
-    ################################################################
-    
-    onlyfiles = [f for f in listdir(playbook_path)
-                 if isfile(join(playbook_path, f))]
-
-    sqlintf = mySql (host, user, passwd, db)
-
-    # Load playbooks
-    print "Loading playbooks"
-    for file in onlyfiles:
-        if "yml" in file:
-            name = file.split (".yml")[0]
-            print "  Loading:", name
-            version = name.split("@")[1]
-            errorCode, diag = loadPlaybook (name, version)
-            if errorCode:
-                print "  Results: Failed - ", diag
-            else:
-                print "  Results: Success"
-        if "tar.gz" in file:
-            name = file.split (".tar.gz")[0]
-            print "  Loading:", name
-            version = name.split("@")[1]
-            errorCode, diag = loadPlaybook (name, version, ".tar.gz")
-
-    print "\nLoading inventory"
-    
-    # Load inventory
-    hostgroup = None
-    inv = {}
-    file = open(inventory, 'r')
-
-    for line in file:
-
-        if '[' in line and ']' in line:
-            hostgroup = line.strip().replace('[','').replace(']','')
-            inv[hostgroup] = {}
-        elif hostgroup and len(line.strip())>0:
-            host = line.strip().split(" ")[0]
-            credentials = line.replace(host,"")
-            inv[hostgroup][host] = credentials
-                               
-    file.close()
-
-    for hostgroup in inv:
-        print "  Loading:", hostgroup
-        hostfqdn = ''
-        cred = ''
-        for hostname in inv[hostgroup]:
-            cred = inv[hostgroup][hostname]
-            errorCode, diag = loadCredentials (hostgroup, hostname, cred)
-            if errorCode:
-                print "  Results: Failed - ", diag
-            else:
-                print "  Results: Success"
-                
-    sqlintf.Close()
diff --git a/ansible-adapter/ansible-example-server/README b/ansible-adapter/ansible-example-server/README
deleted file mode 100644
index c858361e..00000000
--- a/ansible-adapter/ansible-example-server/README
+++ /dev/null
@@ -1,103 +0,0 @@
-'''
-/*-
-* ============LICENSE_START=======================================================
-* ONAP : APPC
-* ================================================================================
-* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
-* ================================================================================
-* Copyright (C) 2017 Amdocs
-* =============================================================================
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*      http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-* 
-* ECOMP is a trademark and service mark of AT&T Intellectual Property.
-* ============LICENSE_END=========================================================
-*/
-'''
-
-============
-INSTALLATION:
-============
-
-Python:
--------
-sudo apt-get install python2.7
-sudo apt-get install python-pip
-pip install PyMySQL
-pip install requests
-
-Ansible:
---------
-sudo apt-get install software-properties-common
-sudo apt-add-repository ppa:ansible/ansible
-sudo apt-get update
-sudo apt-get install ansible
-
-SQL db:
--------
-
-sudo apt-get install mysql-server
-
-Set root passwd during installation (i.e. password_4_mysql_user_id)
-
-sudo service mysql restart
-
-Setup mysql:
-------------
-
-mysql -u [username]-p
-mysql -uroot -p
-
-Create user (i.e. id=mysql_user_id psswd=password_4_mysql_user_id)
-  CREATE USER 'appc'@'%' IDENTIFIED BY 'password_4_mysql_user_id';
-  GRANT ALL PRIVILEGES ON *.* TO 'mysql_user_id'@'%';
-  SET PASSWORD FOR 'mysql_user_id'@'%'=PASSWORD('password_4_mysql_user_id');
-
-Create schema
-  CREATE SCHEMA ansible;
-  show databases;
-  use ansible;
-  CREATE TABLE playbook (name VARCHAR(45) NOT NULL, value BLOB, type VARCHAR(60), version VARCHAR(60), PRIMARY KEY (name));
-  show tables;
-  CREATE TABLE inventory (hostname VARCHAR(45) NOT NULL, hostgroup VARCHAR(45), credentials VARCHAR(500), PRIMARY KEY (hostname));
-  SHOW COLUMNS FROM playbook;
-  SHOW COLUMNS FROM inventory;
-  GRANT ALL PRIVILEGES ON *.* TO 'mysql_user_id'@'%' IDENTIFIED BY 'password_4_mysql_user_id' WITH GRANT OPTION;
-  GRANT ALL PRIVILEGES ON *.* TO 'ansible'@'%' IDENTIFIED BY 'ansible_agent' WITH GRANT OPTION;
-  FLUSH PRIVILEGES;
-
-Load db:
---------
-
-python LoadAnsibleMySql.py
-
-=============
-CODE TESTING:
-=============
-1. Start RestServer: python RestServer.py
-
-2. Try curl commands (case no secured REST: http & no authentication):
-
-- Request to execute playbook:
-curl -H "Content-type: application/json" -X POST -d '{"Id": "10", "PlaybookName": "ansible_sleep", "NodeList": ["host"], "Timeout": "60", "EnvParameters": {"Sleep": "10"}}' http://0.0.0.0:8000/Dispatch
-
-response: {"ExpectedDuration": "60sec", "StatusMessage": "PENDING", "StatusCode": 100}
-
-- Get results (blocked until test finished):
-curl --cacert ~/SshKey/fusion_eric-vm_cert.pem --user "appc:abc123" -H "Content-type: application/json" -X GET  "http://0.0.0.0:8000/Dispatch/?Id=10&Type=GetResult"
-
-response: {"Results": {"localhost": {"GroupName": "host", "StatusMessage": "SUCCESS", "StatusCode": 200}}, "PlaybookName": "ansible_sleep", "Version": "0.00", "Duration": "11.261794", "StatusMessage": "FINISHED", "StatusCode": 200}
-
-- Delete playbook execution information
-curl --cacert ~/SshKey/fusion_eric-vm_cert.pem --user "appc:abc123" -H "Content-type: application/json" -X DELETE  http://0.0.0.0:8000/Dispatch/?Id=10
-
-response: {"StatusMessage": "PLAYBOOK EXECUTION RECORDS DELETED", "StatusCode": 200}
diff --git a/ansible-adapter/ansible-example-server/RestServer.py b/ansible-adapter/ansible-example-server/RestServer.py
deleted file mode 100644
index 4758a9b9..00000000
--- a/ansible-adapter/ansible-example-server/RestServer.py
+++ /dev/null
@@ -1,948 +0,0 @@
-'''
-/*-
-* ============LICENSE_START=======================================================
-* ONAP : APPC
-* ================================================================================
-* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
-* ================================================================================
-* Copyright (C) 2017 Amdocs
-* =============================================================================
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*      http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-* 
-* ECOMP is a trademark and service mark of AT&T Intellectual Property.
-* ============LICENSE_END=========================================================
-*/
-'''
-
-import time, datetime, json, os, sys, subprocess, re
-import uuid
-import tarfile
-import shutil
-
-import requests
-
-import cherrypy
-from cherrypy.lib.httputil import parse_query_string
-from cherrypy.lib import auth_basic
-
-from multiprocessing import Process, Manager
-
-from AnsibleModule import ansibleSysCall
-
-import AnsibleSql
-from AnsibleSql import readPlaybook, readCredentials
-
-from os import listdir
-from os.path import isfile, join
-
-TestRecord = Manager().dict()
-ActiveProcess = {}
-
-def sys_call (cmd):
-    p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
-    output = p.stdout.readlines()
-    retval = p.wait()
-    if len (output) > 0:
-        for i in range(len(output)):
-            output[i] = output[i].strip()
-    return retval, output
-
-def callback (Id, Result, Output, Log, returncode):
-    
-    print "***> in RestServer.callback"
-
-    if Id in TestRecord:
-        time_now = datetime.datetime.utcnow()
-        delta_time = (time_now - TestRecord[Id]['Time']).total_seconds()
-        Result['PlaybookName'] = TestRecord[Id]['PlaybookName']
-        Result['Version'] = TestRecord[Id]['Version']
-        if returncode == 137:
-            Result['StatusCode'] = 500
-            Result['StatusMessage'] = "TERMINATED"
-        else:
-            Result['StatusCode'] = 200
-            Result['StatusMessage'] = "FINISHED"
-
-        # Need to update the whole data structure for key=Id otherwise Manager is not updated
-        TestRecord[Id] = {'PlaybookName': TestRecord[Id]['PlaybookName'],
-                          'LCM': TestRecord[Id]['LCM'],
-                          'Version': TestRecord[Id]['Version'],
-                          'NodeList': TestRecord[Id]['NodeList'],
-                          'HostGroupList': TestRecord[Id]['HostGroupList'],
-                          'HostNameList': TestRecord[Id]['HostNameList'],
-                          'Time': TestRecord[Id]['Time'],
-                          'Timeout': TestRecord[Id]['Timeout'],
-                          'Duration': str(delta_time),
-                          'EnvParameters': TestRecord[Id]['EnvParameters'],
-                          'LocalParameters': TestRecord[Id]['LocalParameters'],
-                          'FileParameters': TestRecord[Id]['FileParameters'],
-                          'CallBack': TestRecord[Id]['CallBack'],
-                          'Result': Result,
-                          'Log': Log, 
-                          'Output': Output, 
-                          'Path': TestRecord[Id]['Path'],
-                          'Mandatory': TestRecord[Id]['Path']}
-
-        if not TestRecord[Id]['CallBack'] == None:
-            
-            # Posting results to callback server
-
-            data = {"StatusCode": 200,
-                    "StatusMessage": "FINISHED",
-                    "PlaybookName": TestRecord[Id]["PlaybookName"],
-                    "Version": TestRecord[Id]["Version"],
-                    "Duration": TestRecord[Id]["Duration"],
-                    "Results": TestRecord[Id]['Result']['Results']}
-
-            if not TestRecord[Id]['Output']['Output'] == {}:
-                for key in data["Results"]:
-                    if key in TestRecord[Id]['Output']['Output']:
-                        data["Results"][key]["Output"] = TestRecord[Id]['Output']['Output'][key]
-
-            print "     Posting to", TestRecord[Id]['CallBack']
-            
-            s = requests.Session()
-            r = s.post(TestRecord[Id]['CallBack'], data = json.dumps(data),
-                       headers = {'content-type': 'application/json'})
-            print  "     Response", r.status_code, r.text
-
-def RunAnsible_Playbook (callback, Id, Inventory, Playbook, NodeList, TestRecord,
-                         Path, ArchiveFlag):
-
-    print "***> in RestServer.RunAnsible_Playbook"
-
-    # Run test in playbook for given target
-    Result = ''
-
-    retval, log, returncode = ansibleSysCall (Inventory, Playbook, NodeList,
-                                              TestRecord[Id]['Mandatory'],
-                                              TestRecord[Id]['EnvParameters'],
-                                              TestRecord[Id]['LocalParameters'],
-                                              TestRecord[Id]['LCM'],
-                                              TestRecord[Id]['Timeout'])
-
-
-    print "   returncode:", returncode
-    print "   retval:    ", retval
-    print "   log:       ", log
-    
-    Log = ''.join(log)
-    Output = {'Output': {}}
-    
-    onlyfiles = [f for f in listdir(Path)
-                 if isfile(join(Path, f))]
-
-    for file in onlyfiles:
-        if "results.txt" in file:
-            f = open(Path + "/" + file, "r")
-            key = file.split("_")[0]
-            Output['Output'][key] = f.read()
-            f.close()
-
-    Result = {'Results': {}}
-    if 'could not be found' in Log:
-        Result['Results'] = {"StatusCode": 101,
-                             "StatusMessage": "PLAYBOOK NOT FOUND"}
-    if returncode == 137:
-        Result['Results'] = {"StatusCode": 500,
-                             "StatusMessage": "TERMINATED"}
-
-    elif TestRecord[Id]['NodeList'] == []:
-        
-        host_index = None
-        
-        if 'TargetNode' in TestRecord[Id]['EnvParameters']:
-            targetlist = TestRecord[Id]['EnvParameters']['TargetNode'].split(' ')
-        else:
-            targetlist = ["localhost"]
-            
-        for key in retval:
-            for i in range (len(targetlist)):
-                if key in targetlist[i]:
-                    host_index = i
-    
-            if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \
-                   int(retval[key][3]) == 0:
-
-                if host_index:
-                    Result['Results'][targetlist[host_index]] = \
-                             {"GroupName": 'na', "StatusCode": 200, \
-                              "StatusMessage": "SUCCESS"}
-                else:
-                    Result['Results'][key] = \
-                             {"GroupName": 'na', "StatusCode": 200, \
-                              "StatusMessage": "SUCCESS"}                    
-            elif int(retval[key][2]) > 0:
-                if host_index:
-                    Result['Results'][targetlist[host_index]] = \
-                       {"GroupName": 'na', "StatusCode": 400, \
-                        "StatusMessage": "NOT REACHABLE"}
-                else:
-                    Result['Results'][key] = \
-                       {"GroupName": 'na', "StatusCode": 400, \
-                        "StatusMessage": "NOT REACHABLE"}                    
-            elif int(retval[key][3]) > 0:
-                if host_index:                
-                    Result['Results'][targetlist[host_index]] = \
-                       {"GroupName": 'na', "StatusCode": 400, \
-                        "StatusMessage": "FAILURE"}
-                else:
-                    Result['Results'][key] = \
-                       {"GroupName": 'na', "StatusCode": 400, \
-                        "StatusMessage": "FAILURE"}                    
-    else:
-        
-        for key in retval:
-
-            if len(TestRecord[Id]['HostNameList']) > 0:
-
-                host_index = []
-                for i in range (len(TestRecord[Id]['HostNameList'])):
-                    if key in TestRecord[Id]['HostNameList'][i]:
-                        host_index.append(i)
-
-                if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \
-                       int(retval[key][3]) == 0:
-
-                    if len(host_index) > 0:
-                        Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \
-                          {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]],
-                           "StatusCode": 200, "StatusMessage": "SUCCESS"}
-                    
-                        for i in range (1, len(host_index)):
-                            Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\
-                             "," + TestRecord[Id]['HostGroupList'][host_index[i]]
-                    else:
-                       Result['Results'][key] = \
-                          {"GroupName": key,
-                           "StatusCode": 200, "StatusMessage": "SUCCESS"}  
-
-                elif int(retval[key][2]) > 0:
-
-                    if len(host_index) > 0:
-                        Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \
-                          {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]],
-                           "StatusCode": 400, "StatusMessage": "NOT REACHABLE"}
-                    
-                        for i in range (1, len(host_index)):
-                            Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\
-                             "," + TestRecord[Id]['HostGroupList'][host_index[i]]
-                    else:
-                       Result['Results'][key] = \
-                          {"GroupName": key,
-                           "StatusCode": 200, "StatusMessage": "NOT REACHABLE"}  
-                    
-                elif int(retval[key][3]) > 0:
-
-                    if len(host_index) > 0:
-                        Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \
-                          {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]],
-                           "StatusCode": 400, "StatusMessage": "FAILURE"}
-                    
-                        for i in range (1, len(host_index)):
-                            Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\
-                             "," + TestRecord[Id]['HostGroupList'][host_index[i]]
-                    else:
-                       Result['Results'][key] = \
-                          {"GroupName": key,
-                           "StatusCode": 200, "StatusMessage": "FAILURE"}                          
-            else:
-                host_index = None
-                for i in range (len(TestRecord[Id]['NodeList'])):
-                    if key in TestRecord[Id]['NodeList'][i]:
-                        host_index = i
-    
-                if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \
-                       int(retval[key][3]) == 0:
-                    Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \
-                             {"GroupName": 'na', "StatusCode": 200, \
-                             "StatusMessage": "SUCCESS"}
-                elif int(retval[key][2]) > 0:
-                    Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \
-                       {"GroupName": 'na', "StatusCode": 400, "StatusMessage": "NOT REACHABLE"}
-                elif int(retval[key][3]) > 0:
-                    Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \
-                       {"GroupName": 'na', "StatusCode": 400, "StatusMessage": "FAILURE"}
-    
-    callback (Id, Result, Output, Log, returncode)
-
-class TestManager (object):
-
-    @cherrypy.expose
-    @cherrypy.tools.json_out()
-    @cherrypy.tools.json_in()
-    @cherrypy.tools.allow(methods=['POST', 'GET', 'DELETE'])
-
-    def Dispatch(self, **kwargs):
-
-        # Let cherrypy error handler deal with malformed requests
-        # No need for explicit error handler, we use default ones
-
-        time_now = datetime.datetime.utcnow()
-
-        # Erase old test results (2x timeout)
-        if TestRecord:
-            for key in TestRecord.copy():
-                delta_time = (time_now - TestRecord[key]['Time']).seconds
-                if delta_time > 2*TestRecord[key]['Timeout']:
-                    print "Deleted history for test", key
-                    if os.path.exists(TestRecord[key]['Path']):
-                        shutil.rmtree (TestRecord[key]['Path'])
-                    del TestRecord[key]
-                    
-        print "***> in RestServer.Dispatch:", cherrypy.request.method
-
-        HomeDir = os.path.dirname(os.path.realpath("~/"))
-
-        if 'POST' in cherrypy.request.method:
-            
-            input_json = cherrypy.request.json
-            print "   Payload:      ", input_json
-
-            if 'Id' in input_json and 'PlaybookName' in input_json:
-
-                if True:
-
-                    if not input_json['Id'] in TestRecord:
-                    
-                        Id = input_json['Id']
-                        PlaybookName = input_json['PlaybookName']
-
-                        version = None
-                        if 'Version' in input_json:
-                            version = input_json['Version']
-                    
-                        AnsibleInvFail = True
-                        AnsiblePlaybookFail = True
-
-                        MySqlConFail = True
-                        MySqlCause = ''
-
-                        LocalNodeList = None
-
-                        str_uuid = str (uuid.uuid4())
-                        
-                        LCM = PlaybookName.split(".")[0].split('_')[-1]
-                        PlaybookDir = HomeDir + "/" + ansible_temp + "/" + \
-                                      PlaybookName.split(".")[0] + "_" + str_uuid
-                        AnsibleInv = LCM + "_" + "inventory"
-                        ArchiveFlag = False
-
-                        print "   LCM:          ", LCM
-                        print "   PlaybookDir:  ", ansible_temp + PlaybookDir.split(ansible_temp)[1]
-                        print "   AnsibleInv:   ", AnsibleInv
-                        print "   ansible_temp: ", ansible_temp
-
-                        if not os.path.exists(HomeDir + "/" + ansible_temp):
-                            os.makedirs(HomeDir + "/" + ansible_temp)
-
-                        os.mkdir(PlaybookDir)
-
-                        # Process inventory file for target
-                    
-                        hostgrouplist = []
-                        hostnamelist = []
-
-                        NodeList = []
-                        if 'NodeList' in input_json:
-                            NodeList = input_json['NodeList']
-
-                        print "   NodeList:     ", NodeList
-
-                        if NodeList == []:
-                                # By default set to local host
-                                AnsibleInvFail = False
-
-                                LocalNodeList = "host"
-                                LocalCredentials = "localhost   ansible_connection=local"
-                                f = open(PlaybookDir + "/" + AnsibleInv, "w")
-                                f.write("[" + LocalNodeList + "]\n")
-                                f.write(LocalCredentials)
-                                f.close()
-
-                        else:
-
-                                if from_files:
-                                    
-                                    # Get credentials from file
-
-                                    data_inventory_orig = {}
-                                    data_inventory_target = {}
-                                    curr_group = None
-
-                                    print "***>", ansible_path + "/" + ansible_inv
-                                    f = open(ansible_path + "/" + ansible_inv, "r")
-                                    for line in f:
-                                        line = line.rstrip()
-                                        
-                                        if len(line)> 0:
-                                            if '#' not in line:
-                                                if "[" in line and "]" in line:
-                                                    data_inventory_orig[line] = []
-                                                    curr_group = line
-                                                else:
-                                                    data_inventory_orig[curr_group].append(line)
-                                    f.close()
-
-                                    for node in NodeList:
-                                        Fail = True
-                                        if "[" + node + "]" in data_inventory_orig:
-                                            if not "[" + node + "]" in data_inventory_target:
-
-                                                print "RESET", "[" + node + "]"
-                                                data_inventory_target["[" + node + "]"] = []
-                                            else:
-                                                print "OK", "[" + node + "]"
-                                            Fail = False
-                                            for cred in data_inventory_orig["[" + node + "]"]:
-                                                data_inventory_target["[" + node + "]"].append(cred)
-                                                
-                                        else:
-                                            for key in data_inventory_orig:
-                                                if node in " ".join(data_inventory_orig[key]):
-                                                    if not key in data_inventory_target:
-                                                        data_inventory_target[key] = []
-                                                    for cred in data_inventory_orig[key]:
-                                                        if node in cred:
-                                                            data_inventory_target[key].append(cred)
-                                                            Fail = False
-
-                                        if Fail:
-                                            data_inventory_target["["+node+"]"] = \
-                                                   [node + " ansible_connection=ssh ansible_ssh_user=na ansible_ssh_private_key_file=na"]
-                                    
-                                    AnsibleInvFail = False
-
-                                    f = open(PlaybookDir + "/" + AnsibleInv, "w")
-                                    for key in data_inventory_target:
-                                        f.write(key + "\n")
-                                        for rec in data_inventory_target[key]:
-                                            hostgrouplist.append(key.replace("[", '').replace("]", ''))
-                                            hostnamelist.append(rec.split(' ')[0])
-                                            f.write(rec + "\n")
-                                    f.close()
-
-                                else:
-                                    
-                                    # Get credentials from mySQL
-                            
-                                    sqlintf = AnsibleSql.mySql (host, user, passwd,
-                                                                db)
-                                    if sqlintf.con:
-                                        MySqlConFail = False
-                                        errorCode, diag = readCredentials (sqlintf,
-                                                                           NodeList)
-                                    
-                                        print errorCode, diag 
-                                        if len (diag) > 0:
-                                            f = open(PlaybookDir + "/" + AnsibleInv,
-                                                     "w")
-                                            AnsibleInvFail = False
-                                            # [hostgroup, hostname, credentials]
-                                            for i in range(len(diag)):
-                                                f.write('[' +  diag[i][0] + ']' + "\n")
-                                                f.write(diag[i][1]+ " " +  diag[i][2] + "\n\n")
-                                                hostgrouplist.append(diag[i][0])
-                                                hostnamelist.append(diag[i][1])
-                                            f.close()
-                                        else:
-                                            MySqlConFailCause = sqlintf.error
-                                    sqlintf.Close()
-
-                        timeout = timeout_seconds
-                        if 'Timeout' in input_json:
-                            timeout = int (input_json['Timeout'])
-
-                        EnvParam = {}
-                        if 'EnvParameters' in input_json:
-                            EnvParam = input_json['EnvParameters']
-
-                        LocalParam = {}
-                        if 'LocalParameters' in input_json:
-                            LocalParam = input_json['LocalParameters']
-
-                        FileParam = {}
-                        if 'FileParameters' in input_json:
-                            FileParam = input_json['FileParameters']
-                    
-                        callback_flag = None
-                        if 'CallBack' in input_json:
-                            callback_flag = input_json['CallBack']
-
-                        TestRecord[Id] = {'PlaybookName': PlaybookName,
-                                          'LCM': LCM,
-                                          'Version': version,
-                                          'NodeList': NodeList,
-                                          'HostGroupList': hostgrouplist,
-                                          'HostNameList': hostnamelist,
-                                          'Time': time_now,
-                                          'Duration': timeout,
-                                          'Timeout': timeout,
-                                          'EnvParameters': EnvParam,
-                                          'LocalParameters': LocalParam,
-                                          'FileParameters': FileParam,
-                                          'CallBack': callback_flag,
-                                          'Result': {"StatusCode": 100,
-                                                     "StatusMessage": 'PENDING',
-                                                     "ExpectedDuration": str(timeout) + "sec"},
-                                          'Log': '',
-                                          'Output': {},
-                                          'Path': PlaybookDir,
-                                          'Mandatory': None}
-
-                        # Write files
-                        
-                        if not TestRecord[Id]['FileParameters'] == {}:
-                            for key in TestRecord[Id]['FileParameters']:
-                                filename = key
-                                filecontent = TestRecord[Id]['FileParameters'][key]
-                                f = open(PlaybookDir + "/" + filename, "w")
-                                f.write(filecontent)
-                                f.close()
-                                
-                        
-                        # Process playbook
-
-                        if from_files:
-                            
-                            # Get playbooks from files
-
-                            MySqlConFail = False
-                            
-                            version = None
-                            target_PlaybookName = None
-                            
-                            if '@' in PlaybookName:
-                                version = PlaybookName.split("@")[1]
-                                version = version.replace('.yml','')
-                                version = version.replace('.tar.gz','')
-
-                            onlyfiles = [f for f in listdir(ansible_path)
-                                         if isfile(join(ansible_path, f))]
-
-                            version_max = '0.00'
-                            version_target = ''
-                            
-                            for file in onlyfiles:
-                                if LCM in file:
-                                    temp_version = file.split("@")[1]
-                                    temp_version = temp_version.replace('.yml','')
-                                    temp_version = temp_version.replace('.tar.gz','')
-                                    if version_max < temp_version:
-                                        version_max = temp_version
-                                    
-                                    if not version == None:
-                                        if version in PlaybookName:
-                                            version_target = version
-                                            target_PlaybookName = file
-                                            
-                            if target_PlaybookName == None:
-                                for file in onlyfiles:
-                                    if LCM in file and version_max in file:
-                                        target_PlaybookName = file
-                                        version_target = version_max
-                                        
-                            if target_PlaybookName:
-                                AnsiblePlaybookFail = False
-                                readversion = version_target
-                                src  = ansible_path + "/" + target_PlaybookName
-                                if ".tar.gz" in target_PlaybookName:
-                                    dest = PlaybookDir + "/" + LCM + ".tar.gz"
-                                    shutil.copy2(src, dest)
-                                    retcode = subprocess.call(['tar', '-xvzf',
-                                                   dest, "-C", PlaybookDir])
-                                    ArchiveFlag = True
-                                else:
-                                    dest = PlaybookDir + "/" + LCM + ".yml"
-                                    shutil.copy2(src, dest)
-                            
-                        else:
-                            # Get playbooks from mySQL
-
-                            sqlintf = AnsibleSql.mySql (host, user, passwd, db)
-                            if sqlintf.con:
-                                MySqlConFail = False
-                                
-                                name, readversion, AnsiblePlaybookFail, diag = \
-                                  readPlaybook (sqlintf, PlaybookName.split(".")[0],
-                                                version)
-                                
-                                if not AnsiblePlaybookFail:
-
-                                    f = open(PlaybookDir + "/" + LCM + diag[1], "w")
-                                    f.write(diag[0])
-                                    f.close()
-                                    
-                                    if ".tar.gz" in diag[1]:
-                                        retcode = subprocess.call(['tar', '-xvzf',
-                                         PlaybookDir + "/" + LCM + diag[1], "-C", PlaybookDir])
-                                        f.close()
-                                        ArchiveFlag = True
-                            else:
-                                MySqlConFailCause = sqlintf.error
-                            sqlintf.Close()
-
-                        if MySqlConFail:
-                            if os.path.exists(PlaybookDir):
-                                shutil.rmtree (PlaybookDir)
-                            del TestRecord[Id]
-                            return {"StatusCode": 101,
-                                    "StatusMessage": "CANNOT CONNECT TO MYSQL: " \
-                                    + MySqlConFailCause}
-                        elif AnsiblePlaybookFail:
-                            if os.path.exists(PlaybookDir):
-                                shutil.rmtree (PlaybookDir)
-                            del TestRecord[Id]
-                            return {"StatusCode": 101,
-                                    "StatusMessage": "PLAYBOOK NOT FOUND"}
-                        elif AnsibleInvFail:
-                            if os.path.exists(PlaybookDir):
-                                shutil.rmtree (PlaybookDir)
-                            del TestRecord[Id]
-                            return {"StatusCode": 101,
-                                    "StatusMessage": "NODE LIST CREDENTIALS NOT FOUND"}
-                        else:
-
-                            # Test EnvParameters
-                            playbook_path = None
-                            if ArchiveFlag:
-                                for dName, sdName, fList in os.walk(PlaybookDir):
-                                    if LCM+".yml" in fList:
-                                        playbook_path = dName
-                            else:
-                                playbook_path = PlaybookDir
-
-                            # Store local vars
-                            if not os.path.exists(playbook_path + "/vars"):
-                                os.mkdir(playbook_path + "/vars")
-                            if not os.path.isfile(playbook_path + "/vars/defaults.yml"):
-                                os.mknod(playbook_path + "/vars/defaults.yml")
-
-                            for key in TestRecord[Id]['LocalParameters']:
-                                host_index = []
-                                for i in range(len(TestRecord[Id]['HostNameList'])):
-                                    if key in TestRecord[Id]['HostNameList'][i]:
-                                        host_index.append(i)
-                                if len(host_index) == 0:
-                                    for i in range(len(TestRecord[Id]['HostGroupList'])):
-                                        if key in TestRecord[Id]['HostGroupList'][i]:
-                                            host_index.append(i)
-                                if len(host_index) > 0:
-                                    for i in range(len(host_index)):
-                                        f = open(playbook_path + "/vars/" +
-                                                 TestRecord[Id]['HostNameList'][host_index[i]] +
-                                                 ".yml", "a")
-                                        for param in TestRecord[Id]['LocalParameters'][key]:
-                                            f.write(param + ": " +
-                                             str (TestRecord[Id]['LocalParameters'][key][param]) +
-                                                  "\n")
-                                        f.close()
-
-                            # Get mandatory parameters from playbook
-                            Mandatory = []
-                            with open(playbook_path + "/" + LCM + ".yml") as origin_file:
-                                for line in origin_file:
-                                    if "Mandatory" in line:
-                                        temp = line.split(":")[1].strip().replace(' ', '')
-                                        if len(temp) > 0:
-                                            Mandatory = temp.split(",")
-
-                            TestRecord[Id] = {'PlaybookName': TestRecord[Id]['PlaybookName'],
-                                              'LCM': TestRecord[Id]['LCM'],
-                                              'Version': readversion,
-                                              'NodeList': TestRecord[Id]['NodeList'],
-                                              'HostGroupList': TestRecord[Id]['HostGroupList'],
-                                              'HostNameList': TestRecord[Id]['HostNameList'],
-                                              'Time': TestRecord[Id]['Time'],
-                                              'Timeout': TestRecord[Id]['Timeout'],
-                                              'Duration': TestRecord[Id]['Duration'],
-                                              'EnvParameters': TestRecord[Id]['EnvParameters'],
-                                              'LocalParameters': TestRecord[Id]['LocalParameters'],
-                                              'FileParameters': TestRecord[Id]['FileParameters'],
-                                              'CallBack': TestRecord[Id]['CallBack'],
-                                              'Result': TestRecord[Id]['Result'],
-                                              'Log': TestRecord[Id]['Log'],
-                                              'Output': TestRecord[Id]['Output'],
-                                              'Path': TestRecord[Id]['Path'],
-                                              'Mandatory': Mandatory}
-
-                            TestKey = False
-
-                            if Mandatory:
-                                for val in Mandatory:
-                                    if EnvParam:
-                                        if val in EnvParam:
-                                            TestKey = True
-                                        else:
-                                            if LocalParam:
-                                                for key in TestRecord[Id]['NodeList']:
-                                                    if key in LocalParam:
-                                                        if val in LocalParam[key]:
-                                                            TestKey = True
-                                    else:
-                                        if LocalParam:
-                                            for key in TestRecord[Id]['NodeList']:
-                                                if key in LocalParam:
-                                                    if val in LocalParam[key]:
-                                                        TestKey = True
-                                                
-                                if not TestKey:
-                                    if os.path.exists(PlaybookDir):
-                                        shutil.rmtree (PlaybookDir)
-                                    del TestRecord[Id]
-                                    return {"StatusCode": 101,
-                                            "StatusMessage": "MISSING MANDATORY PARAMETER: " + \
-                                            " ".join(str(x) for x in Mandatory)}
-                            
-    
-                            # Cannot use thread because ansible module uses
-                            # signals which are only supported in main thread.
-                            # So use multiprocess with shared object
-
-                            p = Process(target = RunAnsible_Playbook,
-                                        args = (callback, Id,  PlaybookDir + "/" + AnsibleInv,
-                                                playbook_path + "/" + LCM + ".yml",
-                                                NodeList, TestRecord, PlaybookDir,
-                                                ArchiveFlag))
-                            p.start()
-                            ActiveProcess[Id] = p
-                            return TestRecord[Id]['Result']
-                    else:
-                        return {"StatusCode": 101, "StatusMessage": "TEST ID ALREADY DEFINED"}
-
-                else:
-                    return {"StatusCode": 500, "StatusMessage": "REQUEST MUST INCLUDE: NODELIST"}
-                
-            else:
-                return {"StatusCode": 500, "StatusMessage": "JSON OBJECT MUST INCLUDE: ID, PLAYBOOKNAME"}
-
-        elif 'GET' in cherrypy.request.method:
-            
-            input_data = parse_query_string(cherrypy.request.query_string)
-            
-            print "***> in RestServer.GET"
-            print "   Payload: ", input_data, input_data['Type']
-            
-            if 'Id' in input_data and 'Type' in input_data:
-                if not ('GetResult' in input_data['Type'] or 'GetOutput' in input_data['Type'] or 'GetLog' in input_data['Type']):
-                    return {"StatusCode": 500, "StatusMessage": "RESULTS TYPE UNDEFINED"}
-                if input_data['Id'] in TestRecord:
-                    
-                    if 'GetResult' in input_data['Type']:
-                        
-                        print "Result:", TestRecord[input_data['Id']]['Result']
-
-                        if 'StatusMessage' in TestRecord[input_data['Id']]['Result'] and getresults_block:
-
-                            print "*** Request blocked", input_data['Id']
-
-                            while ActiveProcess[input_data['Id']].is_alive():
-                                time.sleep(5)
-
-                            print "*** Request released ", input_data['Id']
-
-                        print TestRecord[input_data['Id']]['Result']
-                        if TestRecord[input_data['Id']]['Result']['StatusCode'] == 500:
-                            out_obj = TestRecord[input_data['Id']]['Result']['Results']
-                        else:
-                            out_obj = {"StatusCode": 200,
-                                   "StatusMessage": "FINISHED",
-                                   "PlaybookName": TestRecord[input_data['Id']]["PlaybookName"],
-                                   "Version": TestRecord[input_data['Id']]["Version"],
-                                   "Duration": TestRecord[input_data['Id']]["Duration"],
-                                   "Results": TestRecord[input_data['Id']]['Result']['Results']}
-                        if not TestRecord[input_data['Id']]['Output']['Output'] == {}:
-                            for key in out_obj["Results"]:
-                                if key in TestRecord[input_data['Id']]['Output']['Output']:
-                                    out_obj["Results"][key]["Output"] = TestRecord[input_data['Id']]['Output']['Output'][key]
-
-                        return out_obj
-
-                    elif 'GetOutput' in input_data['Type']:
-
-                        if TestRecord[input_data['Id']]['Output'] == {} and \
-                               getresults_block:
-
-                            print "*** Request blocked", input_data['Id']
-                            
-                            while TestRecord[input_data['Id']]['Output'] == {} \
-                                      or 'StatusMessage' in TestRecord[input_data['Id']]['Result']:
-                                time.sleep(5)
-
-                            print "*** Request released ", input_data['Id']
-                        
-                        print "Output:", TestRecord[input_data['Id']]['Output']
-                        return {"Output": TestRecord[input_data['Id']]['Output']['Output']}
-                    else:
-                        # GetLog
-
-                        if TestRecord[input_data['Id']]['Log'] == '' and \
-                               getresults_block:
-
-                            print "*** Request blocked", input_data['Id']
-                            
-                            while TestRecord[input_data['Id']]['Log'] == '' \
-                                      or 'StatusMessage' in TestRecord[input_data['Id']]['Result']:
-                                time.sleep(5)
-
-                            print "*** Request released ", input_data['Id']
-                            
-                        print "Log:", TestRecord[input_data['Id']]['Log']
-                        return {"Log": TestRecord[input_data['Id']]['Log']}
-                else:
-                    return {"StatusCode": 500, "StatusMessage": "TEST ID UNDEFINED"}
-            else:
-                return {"StatusCode": 500, "StatusMessage": "MALFORMED REQUEST"}
-        elif 'DELETE' in cherrypy.request.method:
-            input_data = parse_query_string(cherrypy.request.query_string)
-            
-            print "***> in RestServer.DELETE"
-            print "   Payload: ", input_data
-            
-            if input_data['Id'] in TestRecord:
-                if not 'PENDING' in TestRecord[input_data['Id']]['Result']:
-                    print "   Path:", TestRecord[input_data['Id']]['Path']
-                    if os.path.exists(TestRecord[input_data['Id']]['Path']):
-                        shutil.rmtree (TestRecord[input_data['Id']]['Path'])
-                    TestRecord.pop (input_data['Id'])
-                    if input_data['Id'] in ActiveProcess:
-                        ActiveProcess.pop (input_data['Id'])
-
-                    return {"StatusCode": 200, "StatusMessage": "PLAYBOOK EXECUTION RECORDS DELETED"}
-                else:
-                    return {"StatusCode": 200, "StatusMessage": "PENDING"}
-            else:
-                return {"StatusCode": 500, "StatusMessage": "TEST ID UNDEFINED"}
-
-
-if __name__ == '__main__':
-
-    # Read configuration
-
-    config_file_path = "RestServer_config"
-
-    if not os.path.exists(config_file_path):
-        print '[INFO] The config file does not exist'
-        sys.exit(0)
-
-    ip = 'na'
-    port = 'na'
-    tls = False
-    auth = False
-    pub = 'na'
-    id = 'na'
-    priv = 'na'
-    psswd = 'na'
-    timeout_seconds = 'na'
-    ansible_path = 'na'
-    ansible_inv = 'na'
-    ansible_temp = 'na'    
-    host = 'na'
-    user = 'na'
-    passwd = 'na'
-    db = 'na'
-    getresults_block = False
-    from_files = False
-    
-    file = open(config_file_path, 'r')
-    for line in file.readlines():
-        if '#' not in line:
-            if 'ip:' in line:
-                ip = line.split(':')[1].strip()
-            elif 'port:' in line:
-                port = line.split(':')[1].strip()
-            elif 'tls:' in line:
-                tls = 'YES' in line.split(':')[1].strip().upper()
-            elif 'auth:' in line:
-                auth = 'YES' in line.split(':')[1].strip().upper()
-            if tls and 'priv:' in line:
-                priv = line.split(':')[1].strip()
-            if tls and 'pub:' in line:
-                pub = line.split(':')[1].strip()
-            if auth and 'id:' in line:
-                id = line.split(':')[1].strip()
-            if auth and 'psswd:' in line:
-                psswd = line.split(':')[1].strip()
-            if 'timeout_seconds' in line:
-                timeout_seconds = int (line.split(':')[1].strip())
-            if 'ansible_path' in line:
-                ansible_path = line.split(':')[1].strip()
-            if 'ansible_inv' in line:
-                ansible_inv = line.split(':')[1].strip()
-                if not os.path.exists(ansible_path + "/" + ansible_inv):
-                    print '[INFO] The ansible_inv file does not exist'
-                    sys.exit(0)
-            if 'ansible_temp' in line:
-                ansible_temp = line.split(':')[1].strip()
-            if 'host' in line:
-                host = line.split(':')[1].strip()
-            if 'user' in line:
-                user = line.split(':')[1].strip()
-            if 'passwd' in line:
-                passwd = line.split(':')[1].strip()
-            if 'db' in line:
-                db = line.split(':')[1].strip()
-            if 'getresults_block' in line:
-                getresults_block = 'YES' in line.split(':')[1].strip().upper()
-            if 'from_files' in line:
-                from_files = 'YES' in line.split(':')[1].strip().upper()
-    file.close()
-
-    # Initialization
-    
-    global_conf = {
-        'global': {
-            'server.socket_host': ip,
-            'server.socket_port': int(port),
-            'server.protocol_version': 'HTTP/1.1'
-            }
-        }
-
-    if tls:
-        # Use pythons built-in SSL
-        cherrypy.server.ssl_module = 'builtin'
-
-        # Point to certificate files
-
-        if not os.path.exists(pub):
-            print '[INFO] The public certificate does not exist'
-            sys.exit(0)
-
-        if not os.path.exists(priv):
-            print '[INFO] The private key does not exist'
-            sys.exit(0)            
-        
-        cherrypy.server.ssl_certificate = pub
-        cherrypy.server.ssl_private_key = priv
-
-    if auth:
-        userpassdict = {id: psswd}
-        checkpassword = cherrypy.lib.auth_basic.checkpassword_dict(userpassdict)
-
-        app_conf = {'/':
-                    {'tools.auth_basic.on': True,
-                     'tools.auth_basic.realm': 'earth',
-                     'tools.auth_basic.checkpassword': checkpassword,
-                     }
-                    }
-
-        cherrypy.tree.mount(TestManager(), '/', app_conf)
-    else:
-        cherrypy.tree.mount(TestManager(), '/')
-        
-    cherrypy.config.update(global_conf)
-
-    # Start server
-    
-    cherrypy.engine.start()
-    cherrypy.engine.block()
diff --git a/ansible-adapter/ansible-example-server/RestServer_config b/ansible-adapter/ansible-example-server/RestServer_config
deleted file mode 100644
index dc28581c..00000000
--- a/ansible-adapter/ansible-example-server/RestServer_config
+++ /dev/null
@@ -1,55 +0,0 @@
-# /*-
-# * ============LICENSE_START=======================================================
-# * ONAP : APPC
-# * ================================================================================
-# * Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
-# * ================================================================================
-# * Copyright (C) 2017 Amdocs
-# * =============================================================================
-# * Licensed under the Apache License, Version 2.0 (the "License");
-# * you may not use this file except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.apache.org/licenses/LICENSE-2.0
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# * 
-# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
-# * ============LICENSE_END=========================================================
-# */
-
-# Host definition
-ip:	0.0.0.0 
-port:	8000
-
-# Security (controls use of TLS encrypton and RestServer authentication)
-tls:	no
-auth:	no
-
-# TLS certificates (must be built on application host)
-priv:	provide_privated_key.pem
-pub:	provide_public_key.pem
-
-# RestServer authentication
-id:	provide_RestServer_id
-psswd:	provide_password_4_RestServer_id
-
-# Mysql
-host:	localhost
-user:	mysql_user_id
-passwd:	password_4_mysql_user_id
-db:	ansible
-
-# Playbooks
-from_files:		yes
-ansible_path:		/home/ubuntu/RestServerOpenSource
-ansible_inv:		Ansible_inventory
-ansible_temp:		PlaybooksTemp
-timeout_seconds:	60
-
-# Blocking on GetResults
-getresults_block:	yes
diff --git a/ansible-adapter/ansible-example-server/ansible_sleep@0.00.yml b/ansible-adapter/ansible-example-server/ansible_sleep@0.00.yml
deleted file mode 100644
index aba2919e..00000000
--- a/ansible-adapter/ansible-example-server/ansible_sleep@0.00.yml
+++ /dev/null
@@ -1,42 +0,0 @@
-# /*-
-# * ============LICENSE_START=======================================================
-# * ONAP : APPC
-# * ================================================================================
-# * Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
-# * ================================================================================
-# * Copyright (C) 2017 Amdocs
-# * =============================================================================
-# * Licensed under the Apache License, Version 2.0 (the "License");
-# * you may not use this file except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.apache.org/licenses/LICENSE-2.0
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# * 
-# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
-# * ============LICENSE_END=========================================================
-# */
-
-- hosts: all
-
-  # Mandatory: 
-  vars:
-      sleep_time: "{{Sleep|default(10)}}"
-
-  tasks:
-
-    - debug:
-        msg: "Sleep time: {{ sleep_time }}"
-
-    - name: sleep
-      shell: sleep {{ sleep_time }}
-
-
-    - debug:
-        msg: "Done"
-