diff options
Diffstat (limited to 'sdnr/wt/devicemanager-onap/onf14/provider/src/test/resources/currentRevision/ietf-microwave-radio-link@2019-06-19.yang')
| -rw-r--r-- | sdnr/wt/devicemanager-onap/onf14/provider/src/test/resources/currentRevision/ietf-microwave-radio-link@2019-06-19.yang | 861 |
1 files changed, 861 insertions, 0 deletions
diff --git a/sdnr/wt/devicemanager-onap/onf14/provider/src/test/resources/currentRevision/ietf-microwave-radio-link@2019-06-19.yang b/sdnr/wt/devicemanager-onap/onf14/provider/src/test/resources/currentRevision/ietf-microwave-radio-link@2019-06-19.yang new file mode 100644 index 000000000..66f6ade0d --- /dev/null +++ b/sdnr/wt/devicemanager-onap/onf14/provider/src/test/resources/currentRevision/ietf-microwave-radio-link@2019-06-19.yang @@ -0,0 +1,861 @@ +module ietf-microwave-radio-link { + yang-version 1.1; + namespace "urn:ietf:params:xml:ns:yang:ietf-microwave-radio-link"; + prefix mrl; + + import ietf-yang-types { + prefix yang; + reference + "RFC 6991"; + } + import iana-if-type { + prefix ianaift; + } + import ietf-interfaces { + prefix if; + reference + "RFC 8343"; + } + import ietf-interface-protection { + prefix ifprot; + reference + "RFC 8561"; + } + import ietf-microwave-types { + prefix mw-types; + reference + "RFC 8561"; + } + + organization + "Internet Engineering Task Force (IETF) CCAMP WG"; + contact + "WG List: <mailto:ccamp@ietf.org> + + Editors: + Jonas Ahlberg (jonas.ahlberg@ericsson.com) + Min Ye (amy.yemin@huawei.com) + Xi Li (Xi.Li@neclab.eu) + Daniela Spreafico (daniela.spreafico@nokia.com) + Marko Vaupotic (Marko.Vaupotic@aviatnet.com)"; + description + "This is a module for the entities in + a generic microwave system. + + Copyright (c) 2019 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + This version of this YANG module is part of RFC 8561; see + the RFC itself for full legal notices."; + + revision 2019-06-19 { + description + "Initial revision."; + reference + "RFC 8561: A YANG Data Model for Microwave Radio Link"; + } + + feature xpic { + description + "Indicates that the device supports XPIC."; + reference + "ETSI TR 102 311"; + } + + feature mimo { + description + "Indicates that the device supports MIMO."; + reference + "ETSI TR 102 311"; + } + + feature tdm { + description + "Indicates that the device supports TDM."; + } + + typedef power { + type decimal64 { + fraction-digits 1; + } + description + "Type used for the power values in the data nodes + for configuration or status."; + } + + container radio-link-protection-groups { + description + "Configuration of radio link protected groups of + carrier terminations in a radio link. More than one + protected group per radio link terminal is allowed."; + uses ifprot:protection-groups { + refine "protection-group/members" { + must "derived-from-or-self(/if:interfaces/if:interface[if:name = current()]/if:type, 'ianaift:microwaveCarrierTermination')" { + description + "The type of a protection member must be + 'microwaveCarrierTermination'."; + } + } + refine "protection-group/working-entity" { + must "derived-from-or-self(/if:interfaces/if:interface[if:name = current()]/if:type, 'ianaift:microwaveCarrierTermination')" { + description + "The type of a working-entity must be + 'microwaveCarrierTermination'."; + } + } + } + } + container xpic-pairs { + if-feature "xpic"; + description + "Configuration of carrier termination pairs + for operation in XPIC mode."; + reference + "ETSI TR 102 311"; + list xpic-pair { + key "name"; + description + "List of carrier termination pairs in XPIC mode."; + leaf name { + type string; + description + "Name used for identification of the XPIC pair."; + } + leaf enabled { + type boolean; + default "false"; + description + "Enable(true)/disable(false) XPIC"; + } + leaf-list members { + type if:interface-ref; + must "derived-from-or-self(/if:interfaces/if:interface[if:name = current()]/if:type, 'ianaift:microwaveCarrierTermination')" { + description + "The type of a member must be + 'microwaveCarrierTermination'."; + } + min-elements 2; + max-elements 2; + description + "Association to XPIC pairs used in the radio link + terminal."; + } + } + } + container mimo-groups { + if-feature "mimo"; + description + "Configuration of carrier terminations + for operation in MIMO mode."; + reference + "ETSI TR 102 311"; + list mimo-group { + key "name"; + description + "List of carrier terminations in MIMO mode."; + leaf name { + type string; + description + "Name used for identification of the MIMO group."; + } + leaf enabled { + type boolean; + default "false"; + description + "Enable(true)/disable(false) MIMO."; + } + leaf-list members { + type if:interface-ref; + must "derived-from-or-self(/if:interfaces/if:interface[if:name = current()]/if:type, 'ianaift:microwaveCarrierTermination')" { + description + "The type of a member must be + 'microwaveCarrierTermination'."; + } + min-elements 2; + description + "Association to a MIMO group if used in the radio + link terminal."; + } + } + } + + augment "/if:interfaces/if:interface" { + when "derived-from-or-self(if:type,'ianaift:microwaveRadioLinkTerminal')"; + description + "Addition of data nodes for the radio link terminal to + the standard Interface data model, for interfaces of + the type 'microwaveRadioLinkTerminal'."; + leaf id { + type string; + description + "Descriptive identity of the radio link terminal used by + far-end RLT to check that it's connected to the correct + near-end RLT. Does not need to be configured if this + check is not used."; + } + leaf mode { + type identityref { + base mw-types:rlt-mode; + } + mandatory true; + description + "A description of the mode in which the radio link + terminal is configured. The format is X plus Y. + X represents the number of bonded carrier terminations. + Y represents the number of protecting carrier + terminations."; + } + leaf-list carrier-terminations { + type if:interface-ref; + must "derived-from-or-self(/if:interfaces/if:interface[if:name = current()]/if:type, 'ianaift:microwaveCarrierTermination')" { + description + "The type of interface must be + 'microwaveCarrierTermination'."; + } + min-elements 1; + description + "A list of references to carrier terminations + included in the radio link terminal."; + } + leaf-list rlp-groups { + type leafref { + path "/mrl:radio-link-protection-groups/mrl:protection-group/mrl:name"; + } + description + "A list of references to the carrier termination + groups configured for radio link protection in this + radio link terminal."; + } + leaf-list xpic-pairs { + if-feature "xpic"; + type leafref { + path "/mrl:xpic-pairs/mrl:xpic-pair/mrl:name"; + } + description + "A list of references to the XPIC pairs used in this + radio link terminal. One pair can be used by two + terminals."; + reference + "ETSI TR 102 311"; + } + leaf-list mimo-groups { + if-feature "mimo"; + type leafref { + path "/mrl:mimo-groups/mrl:mimo-group/mrl:name"; + } + description + "A reference to the MIMO group used in this + radio link terminal. One group can be used by more + than one terminal."; + reference + "ETSI TR 102 311"; + } + list tdm-connections { + if-feature "tdm"; + key "tdm-type"; + description + "A list stating the number of active TDM connections + of a specified tdm-type that is configured to be + supported by the RLT."; + leaf tdm-type { + type identityref { + base mw-types:tdm-type; + } + description + "The type of TDM connection, which also indicates + the supported capacity."; + } + leaf tdm-connections { + type uint16; + mandatory true; + description + "Number of connections of the specified type."; + } + } + } + augment "/if:interfaces/if:interface" { + when "derived-from-or-self(if:type,'ianaift:microwaveCarrierTermination')"; + description + "Addition of data nodes for carrier termination to + the standard Interface data model, for interfaces + of the type 'microwaveCarrierTermination'."; + leaf carrier-id { + type string; + default "A"; + description + "ID of the carrier (e.g., A, B, C, or D). + Used in XPIC and MIMO configurations to check that + the carrier termination is connected to the correct + far-end carrier termination. Should be the same + carrier ID on both sides of the hop. Left as + default value when MIMO and XPIC are not in use."; + } + leaf tx-enabled { + type boolean; + default "false"; + description + "Disables (false) or enables (true) the transmitter. + Only applicable when the interface is enabled + (interface:enabled = true); otherwise, it's always + disabled."; + } + leaf tx-oper-status { + type enumeration { + enum "off" { + description + "Transmitter is off."; + } + enum "on" { + description + "Transmitter is on."; + } + enum "standby" { + description + "Transmitter is in standby."; + } + } + config false; + description + "Shows the operative status of the transmitter."; + } + leaf tx-frequency { + type uint32; + units "kHz"; + mandatory true; + description + "Selected transmitter frequency."; + } + choice freq-or-distance { + mandatory true; + description + "A choice to configure rx-frequency directly or compute + it as duplex-distance subtracted from tx-frequency."; + leaf rx-frequency { + type uint32; + units "kHz"; + description + "Selected receiver frequency."; + } + leaf duplex-distance { + type int32; + units "kHz"; + description + "Distance between transmitter and receiver frequencies."; + } + } + leaf actual-rx-frequency { + type uint32; + units "kHz"; + config false; + description + "Computed receiver frequency."; + } + leaf actual-duplex-distance { + type uint32; + units "kHz"; + config false; + description + "Computed distance between Tx and Rx frequencies."; + } + leaf channel-separation { + type uint32; + units "kHz"; + mandatory true; + description + "The amount of bandwidth allocated to a carrier. The + distance between adjacent channels in a radio + frequency channels arrangement"; + reference + "ETSI EN 302 217-1"; + } + leaf polarization { + type enumeration { + enum "horizontal" { + description + "Horizontal polarization."; + } + enum "vertical" { + description + "Vertical polarization."; + } + enum "not-specified" { + description + "Polarization not specified."; + } + } + default "not-specified"; + description + "Polarization - a textual description for info only."; + } + choice power-mode { + mandatory true; + description + "A choice of RTPC or ATPC."; + container rtpc { + description + "Remote Transmit Power Control (RTPC)."; + reference + "ETSI EN 302 217-1"; + leaf maximum-nominal-power { + type power { + range "-99..99"; + } + units "dBm"; + mandatory true; + description + "Selected output power."; + reference + "ETSI EN 302 217-1"; + } + } + container atpc { + description + "Automatic Transmitter Power Control (ATPC)."; + reference + "ETSI EN 302 217-1"; + leaf maximum-nominal-power { + type power { + range "-99..99"; + } + units "dBm"; + mandatory true; + description + "Selected maximum output power. Minimum output + power is the same as the system capability, + minimum-power."; + reference + "ETSI EN 302 217-1"; + } + leaf atpc-lower-threshold { + type power { + range "-99..-20"; + } + units "dBm"; + must "current() <= ../atpc-upper-threshold"; + mandatory true; + description + "The lower threshold for the input power at the + far end, which is used in the ATPC mode."; + reference + "ETSI EN 302 217-1"; + } + leaf atpc-upper-threshold { + type power { + range "-99..-20"; + } + units "dBm"; + mandatory true; + description + "The upper threshold for the input power at the + far end, which is used in the ATPC mode."; + reference + "ETSI EN 302 217-1"; + } + } + } + leaf actual-transmitted-level { + type power { + range "-99..99"; + } + units "dBm"; + config false; + description + "Actual transmitted power level (0.1 dBm resolution)."; + reference + "ETSI EN 301 129"; + } + leaf actual-received-level { + type power { + range "-99..-20"; + } + units "dBm"; + config false; + description + "Actual received power level (0.1 dBm resolution)."; + reference + "ETSI EN 301 129"; + } + choice coding-modulation-mode { + mandatory true; + description + "A selection of single or + adaptive coding/modulation mode."; + container single { + description + "A single modulation order only."; + reference + "ETSI EN 302 217-1"; + leaf selected-cm { + type identityref { + base mw-types:coding-modulation; + } + mandatory true; + description + "Selected the single coding/modulation."; + } + } + container adaptive { + description + "Adaptive coding/modulation."; + reference + "ETSI EN 302 217-1"; + leaf selected-min-acm { + type identityref { + base mw-types:coding-modulation; + } + mandatory true; + description + "Selected minimum coding/modulation. + Adaptive coding/modulation shall not go + below this value."; + } + leaf selected-max-acm { + type identityref { + base mw-types:coding-modulation; + } + mandatory true; + description + "Selected maximum coding/modulation. + Adaptive coding/modulation shall not go + above this value."; + } + } + } + leaf actual-tx-cm { + type identityref { + base mw-types:coding-modulation; + } + config false; + description + "Actual coding/modulation in transmitting direction."; + } + leaf actual-snir { + type decimal64 { + range "0..99"; + fraction-digits 1; + } + units "dB"; + config false; + description + "Actual signal to noise plus the interference ratio + (0.1 dB resolution)."; + } + leaf actual-xpi { + if-feature "xpic"; + type decimal64 { + range "0..99"; + fraction-digits 1; + } + units "dB"; + config false; + description + "The actual carrier to cross-polar interference. + Only valid if XPIC is enabled (0.1 dB resolution)."; + reference + "ETSI TR 102 311"; + } + container ct-performance-thresholds { + description + "Specification of thresholds for when alarms should + be sent and cleared for various performance counters."; + leaf received-level-alarm-threshold { + type power { + range "-99..-20"; + } + units "dBm"; + default "-99"; + description + "An alarm is sent when the received power level is + below the specified threshold."; + reference + "ETSI EN 301 129"; + } + leaf transmitted-level-alarm-threshold { + type power { + range "-99..99"; + } + units "dBm"; + default "-99"; + description + "An alarm is sent when the transmitted power level + is below the specified threshold."; + reference + "ETSI EN 301 129"; + } + leaf ber-alarm-threshold { + type enumeration { + enum "1e-9" { + description + "Threshold at 1e-9 (10^-9)."; + } + enum "1e-8" { + description + "Threshold at 1e-8 (10^-8)."; + } + enum "1e-7" { + description + "Threshold at 1e-7 (10^-7)."; + } + enum "1e-6" { + description + "Threshold at 1e-6 (10^-6)."; + } + enum "1e-5" { + description + "Threshold at 1e-5 (10^-5)."; + } + enum "1e-4" { + description + "Threshold at 1e-4 (10^-4)."; + } + enum "1e-3" { + description + "Threshold at 1e-3 (10^-3)."; + } + enum "1e-2" { + description + "Threshold at 1e-2 (10^-2)."; + } + enum "1e-1" { + description + "Threshold at 1e-1 (10^-1)."; + } + } + default "1e-6"; + description + "Specification of at which BER an alarm should + be raised."; + reference + "ETSI EN 302 217-1"; + } + } + leaf if-loop { + type enumeration { + enum "disabled" { + description + "Disables the IF Loop."; + } + enum "client" { + description + "Loops the signal back to the client side."; + } + enum "radio" { + description + "Loops the signal back to the radio side."; + } + } + default "disabled"; + description + "Enable (client/radio) or disable (disabled) + the IF Loop, which loops the signal back to + the client side or the radio side."; + } + leaf rf-loop { + type enumeration { + enum "disabled" { + description + "Disables the RF Loop."; + } + enum "client" { + description + "Loops the signal back to the client side."; + } + enum "radio" { + description + "Loops the signal back to the radio side."; + } + } + default "disabled"; + description + "Enable (client/radio) or disable (disabled) + the RF loop, which loops the signal back to + the client side or the radio side."; + } + container capabilities { + config false; + description + "Capabilities of the installed equipment and + some selected configurations."; + leaf min-tx-frequency { + type uint32; + units "kHz"; + description + "Minimum Tx frequency possible to use."; + } + leaf max-tx-frequency { + type uint32; + units "kHz"; + description + "Maximum Tx frequency possible to use."; + } + leaf min-rx-frequency { + type uint32; + units "kHz"; + description + "Minimum Rx frequency possible to use."; + } + leaf max-rx-frequency { + type uint32; + units "kHz"; + description + "Maximum Tx frequency possible to use."; + } + leaf minimum-power { + type power; + units "dBm"; + description + "The minimum output power supported."; + reference + "ETSI EN 302 217-1"; + } + leaf maximum-available-power { + type power; + units "dBm"; + description + "The maximum output power supported."; + reference + "ETSI EN 302 217-1"; + } + leaf available-min-acm { + type identityref { + base mw-types:coding-modulation; + } + description + "Minimum coding-modulation possible to use."; + } + leaf available-max-acm { + type identityref { + base mw-types:coding-modulation; + } + description + "Maximum coding-modulation possible to use."; + } + } + container error-performance-statistics { + config false; + description + "ITU-T G.826 error performance statistics relevant for + a microwave/millimeter wave carrier."; + leaf bbe { + type yang:counter32; + units "number of block errors"; + description + "Number of Background Block Errors (BBEs). A BBE is an + errored block not occurring as part of Severely Errored + Seconds (SES). Discontinuities in the value of this + counter can occur at re-initialization of the management + system and at other times as indicated by the value of + 'discontinuity-time' in ietf-interfaces."; + reference + "ITU-T G.826"; + } + leaf es { + type yang:counter32; + units "seconds"; + description + "Number of Errored Seconds (ES). An ES is a one-second + period with one or more errored blocks or at least one + defect. Discontinuities in the value of this counter + can occur at re-initialization of the management system + and at other times as indicated by the value of + 'discontinuity-time' in ietf-interfaces."; + reference + "ITU-T G.826"; + } + leaf ses { + type yang:counter32; + units "seconds"; + description + "Number of SES. SES is a one-second period that contains + equal or more than 30% errored blocks or at least + one defect. SES is a subset of ES. Discontinuities in + the value of this counter can occur at re-initialization + of the management system and at other times as indicated + by the value of 'discontinuity-time' in ietf-interfaces."; + reference + "ITU-T G.826"; + } + leaf uas { + type yang:counter32; + units "seconds"; + description + "Number of Unavailable Seconds (UAS); that is, the + total time that the node has been unavailable. + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time' in ietf-interfaces."; + reference + "ITU-T G.826"; + } + } + container radio-performance-statistics { + config false; + description + "ETSI EN 301 129 radio physical interface statistics relevant + for a carrier termination."; + leaf min-rltm { + type power { + range "-99..-20"; + } + units "dBm"; + description + "Minimum received power level. Discontinuities in the + value of this counter can occur at re-initialization + of the management system and at other times as + indicated by the value of 'discontinuity-time' in + ietf-interfaces."; + reference + "ETSI EN 301 129"; + } + leaf max-rltm { + type power { + range "-99..-20"; + } + units "dBm"; + description + "Maximum received power level. Discontinuities in the + value of this counter can occur at re-initialization + of the management system and at other times as + indicated by the value of 'discontinuity-time' in + ietf-interfaces."; + reference + "ETSI EN 301 129"; + } + leaf min-tltm { + type power { + range "-99..99"; + } + units "dBm"; + description + "Minimum transmitted power level. Discontinuities + in the value of this counter can occur at + re-initialization of the management system and + at other times as indicated by the value of + 'discontinuity-time' in ietf-interfaces."; + reference + "ETSI EN 301 129"; + } + leaf max-tltm { + type power { + range "-99..99"; + } + units "dBm"; + description + "Maximum transmitted power level. Discontinuities + in the value of this counter can occur at + re-initialization of the management system and + at other times as indicated by the value of + 'discontinuity-time' in ietf-interfaces."; + reference + "ETSI EN 301 129"; + } + } + } +}
\ No newline at end of file |