Upgrade parents to 2.5.4-SNAPSHOT

Code changes as a result of changes induced by ODL Chlorine SR1

Issue-ID: CCSDK-3856
Signed-off-by: Ravi Pendurty <ravi.pendurty@highstreet-technologies.com>
Change-Id: Ic08786f050e58bdb8371c8f8c25fb0db9f258cd4
Signed-off-by: Ravi Pendurty <ravi.pendurty@highstreet-technologies.com>

7 files changed, 0 insertions, 1687 deletions

diff --git a/sdnr/wt/common-yang/ietf-alarms/pom.xml b/sdnr/wt/common-yang/ietf-alarms/pom.xml
deleted file mode 100755
index 1f2740450..000000000
--- a/sdnr/wt/common-yang/ietf-alarms/pom.xml
+++ /dev/null
@@ -1,46 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ~ ============LICENSE_START=======================================================
-  ~ ONAP : ccsdk features
-  ~ ================================================================================
-  ~ Copyright (C) 2020 highstreet technologies GmbH Intellectual Property.
-  ~ All rights reserved.
-  ~ ================================================================================
-  ~ Licensed under the Apache License, Version 2.0 (the "License");
-  ~ you may not use this file except in compliance with the License.
-  ~ You may obtain a copy of the License at
-  ~
-  ~     http://www.apache.org/licenses/LICENSE-2.0
-  ~
-  ~ Unless required by applicable law or agreed to in writing, software
-  ~ distributed under the License is distributed on an "AS IS" BASIS,
-  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  ~ See the License for the specific language governing permissions and
-  ~ limitations under the License.
-  ~ ============LICENSE_END=======================================================
-  ~
-  -->
-<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
-    <modelVersion>4.0.0</modelVersion>
-
-    <parent>
-        <groupId>org.onap.ccsdk.parent</groupId>
-        <artifactId>binding-parent</artifactId>
-        <version>2.5.3</version>
-        <relativePath/>
-    </parent>
-
-    <groupId>org.onap.ccsdk.features.sdnr.wt</groupId>
-    <artifactId>ietf-alarms</artifactId>
-    <version>1.5.1-SNAPSHOT</version>
-    <packaging>bundle</packaging>
-
-    <name>ccsdk-features :: ${project.artifactId}</name>
-
-    <dependencies>
-	    <dependency>
-            <groupId>org.opendaylight.mdsal.binding.model.ietf</groupId>
-            <artifactId>rfc6991-ietf-yang-types</artifactId>
-    </dependency>
-    </dependencies>
-</project>
diff --git a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/OperatorStateBuilder.java b/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/OperatorStateBuilder.java
deleted file mode 100644
index 7e8327a09..000000000
--- a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/OperatorStateBuilder.java
+++ /dev/null
@@ -1,23 +0,0 @@
-package org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.alarms.rev190911;
-import java.lang.String;
-import java.lang.UnsupportedOperationException;
-
-/**
- * The purpose of generated class in src/main/java for Union types is to create new instances of unions from a string representation.
- * In some cases it is very difficult to automate it since there can be unions such as (uint32 - uint16), or (string - uint32).
- *
- * The reason behind putting it under src/main/java is:
- * This class is generated in form of a stub and needs to be finished by the user. This class is generated only once to prevent
- * loss of user code.
- *
- */
-public class OperatorStateBuilder {
-    private OperatorStateBuilder() {
-        //Exists only to defeat instantiation.
-    }
-
-    public static OperatorState getDefaultInstance(String defaultValue) {
-        throw new UnsupportedOperationException("Not yet implemented");
-    }
-
-}
diff --git a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/ResourceBuilder.java b/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/ResourceBuilder.java
deleted file mode 100644
index 7c4a63d2b..000000000
--- a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/ResourceBuilder.java
+++ /dev/null
@@ -1,23 +0,0 @@
-package org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.alarms.rev190911;
-import java.lang.String;
-import java.lang.UnsupportedOperationException;
-
-/**
- * The purpose of generated class in src/main/java for Union types is to create new instances of unions from a string representation.
- * In some cases it is very difficult to automate it since there can be unions such as (uint32 - uint16), or (string - uint32).
- *
- * The reason behind putting it under src/main/java is:
- * This class is generated in form of a stub and needs to be finished by the user. This class is generated only once to prevent
- * loss of user code.
- *
- */
-public class ResourceBuilder {
-    private ResourceBuilder() {
-        //Exists only to defeat instantiation.
-    }
-
-    public static Resource getDefaultInstance(String defaultValue) {
-        throw new UnsupportedOperationException("Not yet implemented");
-    }
-
-}
diff --git a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/ResourceMatchBuilder.java b/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/ResourceMatchBuilder.java
deleted file mode 100644
index 282a6a26d..000000000
--- a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/ResourceMatchBuilder.java
+++ /dev/null
@@ -1,23 +0,0 @@
-package org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.alarms.rev190911;
-import java.lang.String;
-import java.lang.UnsupportedOperationException;
-
-/**
- * The purpose of generated class in src/main/java for Union types is to create new instances of unions from a string representation.
- * In some cases it is very difficult to automate it since there can be unions such as (uint32 - uint16), or (string - uint32).
- *
- * The reason behind putting it under src/main/java is:
- * This class is generated in form of a stub and needs to be finished by the user. This class is generated only once to prevent
- * loss of user code.
- *
- */
-public class ResourceMatchBuilder {
-    private ResourceMatchBuilder() {
-        //Exists only to defeat instantiation.
-    }
-
-    public static ResourceMatch getDefaultInstance(String defaultValue) {
-        throw new UnsupportedOperationException("Not yet implemented");
-    }
-
-}
diff --git a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/SeverityWithClearBuilder.java b/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/SeverityWithClearBuilder.java
deleted file mode 100644
index 81391922d..000000000
--- a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/SeverityWithClearBuilder.java
+++ /dev/null
@@ -1,23 +0,0 @@
-package org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.alarms.rev190911;
-import java.lang.String;
-import java.lang.UnsupportedOperationException;
-
-/**
- * The purpose of generated class in src/main/java for Union types is to create new instances of unions from a string representation.
- * In some cases it is very difficult to automate it since there can be unions such as (uint32 - uint16), or (string - uint32).
- *
- * The reason behind putting it under src/main/java is:
- * This class is generated in form of a stub and needs to be finished by the user. This class is generated only once to prevent
- * loss of user code.
- *
- */
-public class SeverityWithClearBuilder {
-    private SeverityWithClearBuilder() {
-        //Exists only to defeat instantiation.
-    }
-
-    public static SeverityWithClear getDefaultInstance(String defaultValue) {
-        throw new UnsupportedOperationException("Not yet implemented");
-    }
-
-}
diff --git a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/alarms/ControlMaxAlarmStatusChangesBuilder.java b/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/alarms/ControlMaxAlarmStatusChangesBuilder.java
deleted file mode 100644
index 9f10ae87f..000000000
--- a/sdnr/wt/common-yang/ietf-alarms/src/main/java/org/opendaylight/yang/gen/v1/urn/ietf/params/xml/ns/yang/ietf/alarms/rev190911/alarms/ControlMaxAlarmStatusChangesBuilder.java
+++ /dev/null
@@ -1,23 +0,0 @@
-package org.opendaylight.yang.gen.v1.urn.ietf.params.xml.ns.yang.ietf.alarms.rev190911.alarms;
-import java.lang.String;
-import java.lang.UnsupportedOperationException;
-
-/**
- * The purpose of generated class in src/main/java for Union types is to create new instances of unions from a string representation.
- * In some cases it is very difficult to automate it since there can be unions such as (uint32 - uint16), or (string - uint32).
- *
- * The reason behind putting it under src/main/java is:
- * This class is generated in form of a stub and needs to be finished by the user. This class is generated only once to prevent
- * loss of user code.
- *
- */
-public class ControlMaxAlarmStatusChangesBuilder {
-    private ControlMaxAlarmStatusChangesBuilder() {
-        //Exists only to defeat instantiation.
-    }
-
-    public static Control.MaxAlarmStatusChanges getDefaultInstance(String defaultValue) {
-        throw new UnsupportedOperationException("Not yet implemented");
-    }
-
-}
diff --git a/sdnr/wt/common-yang/ietf-alarms/src/main/yang/ietf-alarms@2019-09-11.yang b/sdnr/wt/common-yang/ietf-alarms/src/main/yang/ietf-alarms@2019-09-11.yang
deleted file mode 100644
index a1c195faf..000000000
--- a/sdnr/wt/common-yang/ietf-alarms/src/main/yang/ietf-alarms@2019-09-11.yang
+++ /dev/null
@@ -1,1526 +0,0 @@
-module ietf-alarms {
-  yang-version 1.1;
-  namespace "urn:ietf:params:xml:ns:yang:ietf-alarms";
-  prefix al;
-
-  import ietf-yang-types {
-    prefix yang;
-    reference
-      "RFC 6991: Common YANG Data Types.";
-  }
-
-  organization
-    "IETF CCAMP Working Group";
-  contact
-    "WG Web:   <https://trac.ietf.org/trac/ccamp>
-     WG List:  <mailto:ccamp@ietf.org>
-
-     Editor:   Stefan Vallin
-               <mailto:stefan@wallan.se>
-
-     Editor:   Martin Bjorklund
-               <mailto:mbj@tail-f.com>";
-  description
-    "This module defines an interface for managing alarms.  Main
-     inputs to the module design are the 3GPP Alarm Integration
-     Reference Point (IRP), ITU-T X.733, and ANSI/ISA-18.2 alarm
-     standards.
-     Main features of this module include:
-
-       * Alarm list:
-                 A list of all alarms.  Cleared alarms stay in
-                 the list until explicitly purged.
-
-       * Operator actions on alarms:
-                 Acknowledging and closing alarms.
-
-       * Administrative actions on alarms:
-                 Purging alarms from the list according to specific
-                 criteria.
-
-       * Alarm inventory:
-                 A management application can read all
-                 alarm types implemented by the system.
-
-       * Alarm shelving:
-                 Shelving (blocking) alarms according
-                 to specific criteria.
-
-       * Alarm profiles:
-                 A management system can attach further
-                 information to alarm types, for example,
-                 overriding system-default severity
-                 levels.
-
-     This module uses a stateful view on alarms.  An alarm is a state
-     for a specific resource (note that an alarm is not a
-     notification).  An alarm type is a possible alarm state for a
-     resource.  For example, the tuple:
-
-       ('link-alarm', 'GigabitEthernet0/25')
-
-     is an alarm of type 'link-alarm' on the resource
-     'GigabitEthernet0/25'.
-
-     Alarm types are identified using YANG identities and an optional
-     string-based qualifier.  The string-based qualifier allows for
-     dynamic extension of the statically defined alarm types.  Alarm
-     types identify a possible alarm state and not the individual
-     notifications.  For example, the traditional 'link-down' and
-     'link-up' notifications are two notifications referring to the
-     same alarm type 'link-alarm'.
-
-     With this design, there is no ambiguity about how alarm and
-     alarm clear correlation should be performed; notifications that
-     report the same resource and alarm type are considered updates
-     of the same alarm, e.g., clearing an active alarm or changing
-     the severity of an alarm.  The instrumentation can update the
-     severity and alarm text on an existing alarm.  The above alarm
-     example can therefore look like the following:
-
-       (('link-alarm', 'GigabitEthernet0/25'),
-        warning,
-        'interface down while interface admin state is up')
-
-     There is a clear separation between updates on the alarm from
-     the underlying resource, like clear, and updates from an
-     operator, like acknowledging or closing an alarm:
-
-       (('link-alarm', 'GigabitEthernet0/25'),
-        warning,
-        'interface down while interface admin state is up',
-        cleared,
-        closed)
-
-     Administrative actions like removing closed alarms older than a
-     given time is supported.
-
-     This YANG module does not define how the underlying
-     instrumentation detects and clears the specific alarms.  That
-     belongs to the Standards Development Organization (SDO) or
-     enterprise that owns that specific technology.
-
-     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
-     NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED',
-     'MAY', and 'OPTIONAL' in this document are to be interpreted as
-     described in BCP 14 (RFC 2119) (RFC 8174) when, and only when,
-     they appear in all capitals, as shown here.
-
-     Copyright (c) 2019 IETF Trust and the persons identified as
-     authors of the code.  All rights reserved.
-
-     Redistribution and use in source and binary forms, with or
-     without modification, is permitted pursuant to, and subject to
-     the license terms contained in, the Simplified BSD License set
-     forth in Section 4.c of the IETF Trust's Legal Provisions
-     Relating to IETF Documents
-     (https://trustee.ietf.org/license-info).
-
-     This version of this YANG module is part of RFC 8632; see
-     the RFC itself for full legal notices.";
-
-  revision 2019-09-11 {
-    description
-      "Initial revision.";
-    reference
-      "RFC 8632: A YANG Data Model for Alarm Management";
-  }
-
-  /*
-   * Features
-   */
-
-  feature operator-actions {
-    description
-      "This feature indicates that the system supports operator
-       states on alarms.";
-  }
-
-  feature alarm-shelving {
-    description
-      "This feature indicates that the system supports shelving
-       (blocking) alarms.
-
-       Alarm shelving may have an impact on server processing
-       resources in order to match alarms against shelf
-       criteria.";
-  }
-
-  feature alarm-history {
-    description
-      "This feature indicates that the server maintains a history
-       of state changes for each alarm.  For example, if an alarm
-       toggles between cleared and active 10 times, these state
-       changes are present in a separate list in the alarm.
-
-       Keeping the alarm history may have an impact on server
-       memory resources.";
-  }
-
-  feature alarm-summary {
-    description
-      "This feature indicates that the server summarizes the number
-       of alarms per severity and operator state.";
-  }
-
-  feature alarm-profile {
-    description
-      "The system enables clients to configure further information
-       to each alarm type.";
-  }
-
-  feature severity-assignment {
-    description
-      "The system supports configurable alarm severity levels.";
-    reference
-      "ITU-T Recommendation M.3100:
-         Generic network information model
-       ITU-T Recommendation M.3160:
-         Generic, protocol-neutral management information model";
-  }
-
-  feature root-cause-analysis {
-    description
-      "The system supports identifying candidate root-cause
-       resources for an alarm, for example, a disk partition
-       root cause for a logger failure alarm.";
-  }
-
-  feature service-impact-analysis {
-    description
-      "The system supports identifying candidate-impacted
-       resources for an alarm, for example, an interface state change
-       resulting in a link alarm, which can refer to a link as being
-       impacted.";
-  }
-
-  feature alarm-correlation {
-    description
-      "The system supports correlating/grouping alarms
-       that belong together.";
-  }
-
-  /*
-   * Identities
-   */
-
-  identity alarm-type-id {
-    description
-      "Base identity for alarm types.  A unique identification of
-       the alarm, not including the resource.  Different resources
-       can share alarm types.  If the resource reports the same
-       alarm type, it is considered to be the same alarm.  The alarm
-       type is a simplification of the different X.733 and 3GPP Alarm
-       IRP correlation mechanisms, and it allows for
-       hierarchical extensions.
-
-       A string-based qualifier can be used in addition to the
-       identity in order to have different alarm types based on
-       information not known at design time, such as values in
-       textual SNMP Notification varbinds.
-
-       Standards and vendors can define sub-identities to clearly
-       identify specific alarm types.
-
-       This identity is abstract and MUST NOT be used for alarms.";
-  }
-
-  /*
-   * Common types
-   */
-
-  typedef resource {
-    type union {
-      type instance-identifier {
-        require-instance false;
-      }
-      type yang:object-identifier;
-      type string;
-      type yang:uuid;
-    }
-    description
-      "This is an identification of the alarming resource, such as an
-       interface.  It should be as fine-grained as possible to both
-       guide the operator and guarantee uniqueness of the alarms.
-
-       If the alarming resource is modeled in YANG, this type will
-       be an instance-identifier.
-
-       If the resource is an SNMP object, the type will be an
-       'object-identifier'.
-
-       If the resource is anything else, for example, a distinguished
-       name or a Common Information Model (CIM) path, this type will
-       be a string.
-
-       If the alarming object is identified by a Universally Unique
-       Identifier (UUID), use the uuid type.  Be cautious when using
-       this type, since a UUID is hard to use for an operator.
-
-       If the server supports several models, the precedence should
-       be in the order as given in the union definition.";
-  }
-
-  typedef resource-match {
-    type union {
-      type yang:xpath1.0;
-      type yang:object-identifier;
-      type string;
-    }
-    description
-      "This type is used to match resources of type 'resource'.
-       Since the type 'resource' is a union of different types, the
-       'resource-match' type is also a union of corresponding types.
-
-       If the type is given as an XPath 1.0 expression, a resource
-       of type 'instance-identifier' matches if the instance is part
-       of the node set that is the result of evaluating the XPath 1.0
-       expression.  For example, the XPath 1.0 expression:
-
-        /ietf-interfaces:interfaces/ietf-interfaces:interface
-            [ietf-interfaces:type='ianaift:ethernetCsmacd']
-
-       would match the resource instance-identifier:
-
-        /if:interfaces/if:interface[if:name='eth1'],
-
-       assuming that the interface 'eth1' is of type
-       'ianaift:ethernetCsmacd'.
-
-       If the type is given as an object identifier, a resource of
-       type 'object-identifier' matches if the match object
-       identifier is a prefix of the resource's object identifier.
-       For example, the value:
-
-        1.3.6.1.2.1.2.2
-
-       would match the resource object identifier:
-
-        1.3.6.1.2.1.2.2.1.1.5
-
-       If the type is given as an UUID or a string, it is interpreted
-       as an XML Schema regular expression, which matches a resource
-       of type 'yang:uuid' or 'string' if the given regular
-       expression matches the resource string.
-
-       If the type is given as an XPath expression, it is evaluated
-       in the following XPath context:
-
-         o  The set of namespace declarations is the set of prefix
-            and namespace pairs for all YANG modules implemented by
-            the server, where the prefix is the YANG module name and
-            the namespace is as defined by the 'namespace' statement
-            in the YANG module.
-
-            If a leaf of this type is encoded in XML, all namespace
-            declarations in scope on the leaf element are added to
-            the set of namespace declarations.  If a prefix found in
-            the XML is already present in the set of namespace
-            declarations, the namespace in the XML is used.
-
-         o  The set of variable bindings is empty.
-
-         o  The function library is the core function library, and
-            the functions are defined in Section 10 of RFC 7950.
-
-         o  The context node is the root node in the data tree.";
-    reference
-      "XML Schema Part 2: Datatypes Second Edition,
-         World Wide Web Consortium Recommendation
-         REC-xmlschema-2-20041028";
-  }
-
-  typedef alarm-text {
-    type string;
-    description
-      "The string used to inform operators about the alarm.  This
-       MUST contain enough information for an operator to be able to
-       understand the problem and how to resolve it.  If this string
-       contains structure, this format should be clearly documented
-       for programs to be able to parse that information.";
-  }
-
-  typedef severity {
-    type enumeration {
-      enum indeterminate {
-        value 2;
-        description
-          "Indicates that the severity level could not be
-           determined.  This level SHOULD be avoided.";
-      }
-      enum warning {
-        value 3;
-        description
-          "The 'warning' severity level indicates the detection of a
-           potential or impending service-affecting fault, before any
-           significant effects have been felt.  Action should be
-           taken to further diagnose (if necessary) and correct the
-           problem in order to prevent it from becoming a more
-           serious service-affecting fault.";
-      }
-      enum minor {
-        value 4;
-        description
-          "The 'minor' severity level indicates the existence of a
-           non-service-affecting fault condition and that corrective
-           action should be taken in order to prevent a more serious
-           (for example, service-affecting) fault.  Such a severity
-           can be reported, for example, when the detected alarm
-           condition is not currently degrading the capacity of the
-           resource.";
-      }
-      enum major {
-        value 5;
-        description
-          "The 'major' severity level indicates that a service-
-           affecting condition has developed and an urgent corrective
-           action is required.  Such a severity can be reported, for
-           example, when there is a severe degradation in the
-           capability of the resource and its full capability must be
-           restored.";
-      }
-      enum critical {
-        value 6;
-        description
-          "The 'critical' severity level indicates that a service-
-           affecting condition has occurred and an immediate
-           corrective action is required.  Such a severity can be
-           reported, for example, when a resource becomes totally out
-           of service and its capability must be restored.";
-      }
-    }
-    description
-      "The severity level of the alarm.  Note well that the value
-       'clear' is not included.  Whether or not an alarm is cleared
-       is a separate boolean flag.";
-    reference
-      "ITU-T Recommendation X.733: Information Technology
-         - Open Systems Interconnection
-         - System Management: Alarm Reporting Function";
-  }
-
-  typedef severity-with-clear {
-    type union {
-      type enumeration {
-        enum cleared {
-          value 1;
-          description
-            "The alarm is cleared by the instrumentation.";
-        }
-      }
-      type severity;
-    }
-    description
-      "The severity level of the alarm including clear.  This is used
-       only in notifications reporting state changes for an alarm.";
-  }
-
-  typedef writable-operator-state {
-    type enumeration {
-      enum none {
-        value 1;
-        description
-          "The alarm is not being taken care of.";
-      }
-      enum ack {
-        value 2;
-        description
-          "The alarm is being taken care of.  Corrective action not
-           taken yet or has failed";
-      }
-      enum closed {
-        value 3;
-        description
-          "Corrective action taken successfully.";
-      }
-    }
-    description
-      "Operator states on an alarm.  The 'closed' state indicates
-       that an operator considers the alarm being resolved.  This is
-       separate from the alarm's 'is-cleared' leaf.";
-  }
-
-  typedef operator-state {
-    type union {
-      type writable-operator-state;
-      type enumeration {
-        enum shelved {
-          value 4;
-          description
-            "The alarm is shelved.  Alarms in /alarms/shelved-alarms/
-             MUST be assigned this operator state by the server as
-             the last entry in the 'operator-state-change' list.  The
-             text for that entry SHOULD include the shelf name.";
-        }
-        enum un-shelved {
-          value 5;
-          description
-            "The alarm is moved back to 'alarm-list' from a shelf.
-             Alarms that are moved from /alarms/shelved-alarms/ to
-             /alarms/alarm-list MUST be assigned this state by the
-             server as the last entry in the 'operator-state-change'
-             list.  The text for that entry SHOULD include the shelf
-             name.";
-        }
-      }
-    }
-    description
-      "Operator states on an alarm.  The 'closed' state indicates
-       that an operator considers the alarm being resolved.  This is
-       separate from the alarm's 'is-cleared' leaf.";
-  }
-
-  /* Alarm type */
-
-  typedef alarm-type-id {
-    type identityref {
-      base alarm-type-id;
-    }
-    description
-      "Identifies an alarm type.  The description of the alarm type
-       id MUST indicate whether or not the alarm type is abstract.
-       An abstract alarm type is used as a base for other alarm type
-       ids and will not be used as a value for an alarm or be present
-       in the alarm inventory.";
-  }
-
-  typedef alarm-type-qualifier {
-    type string;
-    description
-      "If an alarm type cannot be fully specified at design time by
-       'alarm-type-id', this string qualifier is used in addition to
-       fully define a unique alarm type.
-
-       The definition of alarm qualifiers is considered to be part of
-       the instrumentation and is out of scope for this module.  An
-       empty string is used when this is part of a key.";
-  }
-
-  /*
-   * Groupings
-   */
-
-  grouping common-alarm-parameters {
-    description
-      "Common parameters for an alarm.
-
-       This grouping is used both in the alarm list and in the
-       notification representing an alarm-state change.";
-    leaf resource {
-      type resource;
-      mandatory true;
-      description
-        "The alarming resource.  See also 'alt-resource'.  This could
-         be, for example, a reference to the alarming interface";
-    }
-    leaf alarm-type-id {
-      type alarm-type-id;
-      mandatory true;
-      description
-        "This leaf and the leaf 'alarm-type-qualifier' together
-         provide a unique identification of the alarm type.";
-    }
-    leaf alarm-type-qualifier {
-      type alarm-type-qualifier;
-      description
-        "This leaf is used when the 'alarm-type-id' leaf cannot
-         uniquely identify the alarm type.  Normally, this is not the
-         case, and this leaf is the empty string.";
-    }
-    leaf-list alt-resource {
-      type resource;
-      description
-        "Used if the alarming resource is available over other
-         interfaces.  This field can contain SNMP OIDs, CIM paths, or
-         3GPP distinguished names, for example.";
-    }
-    list related-alarm {
-      if-feature "alarm-correlation";
-      key "resource alarm-type-id alarm-type-qualifier";
-      description
-        "References to related alarms.  Note that the related alarm
-         might have been purged from the alarm list.";
-      leaf resource {
-        type leafref {
-          path "/alarms/alarm-list/alarm/resource";
-          require-instance false;
-        }
-        description
-          "The alarming resource for the related alarm.";
-      }
-      leaf alarm-type-id {
-        type leafref {
-          path "/alarms/alarm-list/alarm"
-             + "[resource=current()/../resource]"
-             + "/alarm-type-id";
-          require-instance false;
-        }
-        description
-          "The alarm type identifier for the related alarm.";
-      }
-      leaf alarm-type-qualifier {
-        type leafref {
-          path "/alarms/alarm-list/alarm"
-             + "[resource=current()/../resource]"
-             + "[alarm-type-id=current()/../alarm-type-id]"
-             + "/alarm-type-qualifier";
-          require-instance false;
-        }
-        description
-          "The alarm qualifier for the related alarm.";
-      }
-    }
-    leaf-list impacted-resource {
-      if-feature "service-impact-analysis";
-      type resource;
-      description
-        "Resources that might be affected by this alarm.  If the
-         system creates an alarm on a resource and also has a mapping
-         to other resources that might be impacted, these resources
-         can be listed in this leaf-list.  In this way, the system
-         can create one alarm instead of several.  For example, if an
-         interface has an alarm, the 'impacted-resource' can
-         reference the aggregated port channels.";
-    }
-    leaf-list root-cause-resource {
-      if-feature "root-cause-analysis";
-      type resource;
-      description
-        "Resources that are candidates for causing the alarm.  If the
-         system has a mechanism to understand the candidate root
-         causes of an alarm, this leaf-list can be used to list the
-         root-cause candidate resources.  In this way, the system can
-         create one alarm instead of several.  An example might be a
-         logging system (alarm resource) that fails; the alarm can
-         reference the file system in the 'root-cause-resource'
-         leaf-list.  Note that the intended use is not to also send
-         an alarm with the 'root-cause-resource' as an alarming
-         resource.  The 'root-cause-resource' leaf-list is a hint and
-         should not also generate an alarm for the same problem.";
-    }
-  }
-
-  grouping alarm-state-change-parameters {
-    description
-      "Parameters for an alarm-state change.
-
-       This grouping is used both in the alarm list's status-change
-       list and in the notification representing an alarm-state
-       change.";
-    leaf time {
-      type yang:date-and-time;
-      mandatory true;
-      description
-        "The time the status of the alarm changed.  The value
-         represents the time the real alarm-state change appeared in
-         the resource and not when it was added to the alarm
-         list.  The /alarm-list/alarm/last-changed MUST be set to the
-         same value.";
-    }
-    leaf perceived-severity {
-      type severity-with-clear;
-      mandatory true;
-      description
-        "The severity of the alarm as defined by X.733.  Note that
-         this may not be the original severity since the alarm may
-         have changed severity.";
-      reference
-        "ITU-T Recommendation X.733: Information Technology
-           - Open Systems Interconnection
-           - System Management: Alarm Reporting Function";
-    }
-    leaf alarm-text {
-      type alarm-text;
-      mandatory true;
-      description
-        "A user-friendly text describing the alarm-state change.";
-      reference
-        "ITU-T Recommendation X.733: Information Technology
-           - Open Systems Interconnection
-           - System Management: Alarm Reporting Function";
-    }
-  }
-
-  grouping operator-parameters {
-    description
-      "This grouping defines parameters that can be changed by an
-       operator.";
-    leaf time {
-      type yang:date-and-time;
-      mandatory true;
-      description
-        "Timestamp for operator action on the alarm.";
-    }
-    leaf operator {
-      type string;
-      mandatory true;
-      description
-        "The name of the operator that has acted on this alarm.";
-    }
-    leaf state {
-      type operator-state;
-      mandatory true;
-      description
-        "The operator's view of the alarm state.";
-    }
-    leaf text {
-      type string;
-      description
-        "Additional optional textual information provided by the
-         operator.";
-    }
-  }
-
-  grouping resource-alarm-parameters {
-    description
-      "Alarm parameters that originate from the resource view.";
-    leaf is-cleared {
-      type boolean;
-      mandatory true;
-      description
-        "Indicates the current clearance state of the alarm.  An
-         alarm might toggle from active alarm to cleared alarm and
-         back to active again.";
-    }
-    leaf last-raised {
-      type yang:date-and-time;
-      mandatory true;
-      description
-        "An alarm may change severity level and toggle between
-         active and cleared during its lifetime.  This leaf indicates
-         the last time it was raised ('is-cleared' = 'false').";
-    }
-    leaf last-changed {
-      type yang:date-and-time;
-      mandatory true;
-      description
-        "A timestamp when the 'status-change' or
-         'operator-state-change' list was last changed.";
-    }
-    leaf perceived-severity {
-      type severity;
-      mandatory true;
-      description
-        "The last severity of the alarm.
-
-         If an alarm was raised with severity 'warning' but later
-         changed to 'major', this leaf will show 'major'.";
-    }
-    leaf alarm-text {
-      type alarm-text;
-      mandatory true;
-      description
-        "The last reported alarm text.  This text should contain
-         information for an operator to be able to understand the
-         problem and how to resolve it.";
-    }
-    list status-change {
-      if-feature "alarm-history";
-      key "time";
-      min-elements 1;
-      description
-        "A list of status-change events for this alarm.
-
-         The entry with latest timestamp in this list MUST
-         correspond to the leafs 'is-cleared', 'perceived-severity',
-         and 'alarm-text' for the alarm.
-
-         This list is ordered according to the timestamps of alarm
-         state changes.  The first item corresponds to the latest
-         state change.
-
-         The following state changes create an entry in this
-         list:
-         - changed severity (warning, minor, major, critical)
-         - clearance status; this also updates the 'is-cleared'
-           leaf
-         - alarm-text update";
-      uses alarm-state-change-parameters;
-    }
-  }
-
-  grouping filter-input {
-    description
-      "Grouping to specify a filter construct on alarm information.";
-    leaf alarm-clearance-status {
-      type enumeration {
-        enum any {
-          description
-            "Ignore alarm-clearance status.";
-        }
-        enum cleared {
-          description
-            "Filter cleared alarms.";
-        }
-        enum not-cleared {
-          description
-            "Filter not-cleared alarms.";
-        }
-      }
-      mandatory true;
-      description
-        "The clearance status of the alarm.";
-    }
-    container older-than {
-      presence "Age specification";
-      description
-        "Matches the 'last-status-change' leaf in the alarm.";
-      choice age-spec {
-        description
-          "Filter using date and time age.";
-        case seconds {
-          leaf seconds {
-            type uint16;
-            description
-              "Age expressed in seconds.";
-          }
-        }
-        case minutes {
-          leaf minutes {
-            type uint16;
-            description
-              "Age expressed in minutes.";
-          }
-        }
-        case hours {
-          leaf hours {
-            type uint16;
-            description
-              "Age expressed in hours.";
-          }
-        }
-        case days {
-          leaf days {
-            type uint16;
-            description
-              "Age expressed in days.";
-          }
-        }
-        case weeks {
-          leaf weeks {
-            type uint16;
-            description
-              "Age expressed in weeks.";
-          }
-        }
-      }
-    }
-    container severity {
-      presence "Severity filter";
-      choice sev-spec {
-        description
-          "Filter based on severity level.";
-        leaf below {
-          type severity;
-          description
-            "Severity less than this leaf.";
-        }
-        leaf is {
-          type severity;
-          description
-            "Severity level equal to this leaf.";
-        }
-        leaf above {
-          type severity;
-          description
-            "Severity level higher than this leaf.";
-        }
-      }
-      description
-        "Filter based on severity.";
-    }
-    container operator-state-filter {
-      if-feature "operator-actions";
-      presence "Operator state filter";
-      leaf state {
-        type operator-state;
-        description
-          "Filter on operator state.";
-      }
-      leaf user {
-        type string;
-        description
-          "Filter based on which operator.";
-      }
-      description
-        "Filter based on operator state.";
-    }
-  }
-
-  /*
-   * The /alarms data tree
-   */
-
-  container alarms {
-    description
-      "The top container for this module.";
-    container control {
-      description
-        "Configuration to control the alarm behavior.";
-      leaf max-alarm-status-changes {
-        type union {
-          type uint16;
-          type enumeration {
-            enum infinite {
-              description
-                "The status-change entries are accumulated
-                 infinitely.";
-            }
-          }
-        }
-        default "32";
-        description
-          "The 'status-change' entries are kept in a circular list
-           per alarm.  When this number is exceeded, the oldest
-           status change entry is automatically removed.  If the
-           value is 'infinite', the status-change entries are
-           accumulated infinitely.";
-      }
-      leaf notify-status-changes {
-        type enumeration {
-          enum all-state-changes {
-            description
-              "Send notifications for all status changes.";
-          }
-          enum raise-and-clear {
-            description
-              "Send notifications only for raise, clear, and
-               re-raise.  Notifications for severity-level changes or
-               alarm-text changes are not sent.";
-          }
-          enum severity-level {
-            description
-              "Only send notifications for alarm-state changes
-               crossing the level specified in
-               'notify-severity-level'.  Always send clear
-               notifications.";
-          }
-        }
-        must '. != "severity-level" or ../notify-severity-level' {
-          description
-            "When notify-status-changes is 'severity-level', a value
-             must be given for 'notify-severity-level'.";
-        }
-        default "all-state-changes";
-        description
-          "This leaf controls the notifications sent for alarm status
-           updates.  There are three options:
-
-           1.  Notifications are sent for all updates, severity-level
-               changes, and alarm-text changes.
-
-           2.  Notifications are only sent for alarm raise and clear.
-
-           3.  Notifications are sent for status changes equal to or
-               above the specified severity level.  Clear
-               notifications shall always be sent.  Notifications
-               shall also be sent for state changes that make an
-               alarm less severe than the specified level.
-
-           For example, in option 3, assume that the severity level
-           is set to major and that the alarm has the following state
-           changes:
-
-           [(Time, severity, clear)]:
-           [(T1, major, -), (T2, minor, -), (T3, warning, -),
-            (T4, minor, -), (T5, major, -), (T6, critical, -),
-            (T7, major.  -), (T8, major, clear)]
-
-           In that case, notifications will be sent at times
-           T1, T2, T5, T6, T7, and T8.";
-      }
-      leaf notify-severity-level {
-        when '../notify-status-changes = "severity-level"';
-        type severity;
-        description
-          "Only send notifications for alarm-state changes crossing
-           the specified level.  Always send clear notifications.";
-      }
-      container alarm-shelving {
-        if-feature "alarm-shelving";
-        description
-          "The 'alarm-shelving/shelf' list is used to shelve
-           (block/filter) alarms.  The conditions in the shelf
-           criteria are logically ANDed.  The first matching shelf is
-           used, and an alarm is shelved only for this first match.
-           Matching alarms MUST appear in the
-           /alarms/shelved-alarms/shelved-alarm list, and
-           non-matching /alarms MUST appear in the
-           /alarms/alarm-list/alarm list.  The server does not send
-           any notifications for shelved alarms.
-
-           The server MUST maintain states (e.g., severity
-           changes) for the shelved alarms.
-
-           Alarms that match the criteria shall have an
-           operator state 'shelved'.  When the shelf
-           configuration removes an alarm from the shelf, the server
-           shall add the operator state 'un-shelved'.";
-        list shelf {
-          key "name";
-          ordered-by user;
-          leaf name {
-            type string;
-            description
-              "An arbitrary name for the alarm shelf.";
-          }
-          description
-            "Each entry defines the criteria for shelving alarms.
-             Criteria are ANDed.  If no criteria are specified,
-             all alarms will be shelved.";
-          leaf-list resource {
-            type resource-match;
-            description
-              "Shelve alarms for matching resources.";
-          }
-          list alarm-type {
-            key "alarm-type-id alarm-type-qualifier-match";
-            description
-              "Any alarm matching the combined criteria of
-               'alarm-type-id' and 'alarm-type-qualifier-match'
-               MUST be matched.";
-            leaf alarm-type-id {
-              type alarm-type-id;
-              description
-                "Shelve all alarms that have an 'alarm-type-id' that
-                 is equal to or derived from the given
-                 'alarm-type-id'.";
-            }
-            leaf alarm-type-qualifier-match {
-              type string;
-              description
-                "An XML Schema regular expression that is used to
-                 match an alarm type qualifier.  Shelve all alarms
-                 that match this regular expression for the alarm
-                 type qualifier.";
-              reference
-                "XML Schema Part 2: Datatypes Second Edition,
-                   World Wide Web Consortium Recommendation
-                   REC-xmlschema-2-20041028";
-            }
-          }
-          leaf description {
-            type string;
-            description
-              "An optional textual description of the shelf.  This
-               description should include the reason for shelving
-               these alarms.";
-          }
-        }
-      }
-    }
-    container alarm-inventory {
-      config false;
-      description
-        "The 'alarm-inventory/alarm-type' list contains all possible
-         alarm types for the system.
-
-         If the system knows for which resources a specific alarm
-         type can appear, it is also identified in the inventory.
-         The list also tells if each alarm type has a corresponding
-         clear state.  The inventory shall only contain concrete
-         alarm types.
-
-         The alarm inventory MUST be updated by the system when new
-         alarms can appear.  This can be the case when installing new
-         software modules or inserting new card types.  A
-         notification 'alarm-inventory-changed' is sent when the
-         inventory is changed.";
-      list alarm-type {
-        key "alarm-type-id alarm-type-qualifier";
-        description
-          "An entry in this list defines a possible alarm.";
-        leaf alarm-type-id {
-          type alarm-type-id;
-          description
-            "The statically defined alarm type identifier for this
-             possible alarm.";
-        }
-        leaf alarm-type-qualifier {
-          type alarm-type-qualifier;
-          description
-            "The optionally dynamically defined alarm type identifier
-             for this possible alarm.";
-        }
-        leaf-list resource {
-          type resource-match;
-          description
-            "Optionally, specifies for which resources the alarm type
-             is valid.";
-        }
-        leaf will-clear {
-          type boolean;
-          mandatory true;
-          description
-            "This leaf tells the operator if the alarm will be
-             cleared when the correct corrective action has been
-             taken.  Implementations SHOULD strive for detecting the
-             cleared state for all alarm types.
-
-             If this leaf is 'true', the operator can monitor the
-             alarm until it becomes cleared after the corrective
-             action has been taken.
-
-             If this leaf is 'false', the operator needs to validate
-             that the alarm is no longer active using other
-             mechanisms.  Alarms can lack a corresponding clear due
-             to missing instrumentation or no logical
-             corresponding clear state.";
-        }
-        leaf-list severity-level {
-          type severity;
-          description
-            "This leaf-list indicates the possible severity levels of
-             this alarm type.  Note well that 'clear' is not part of
-             the severity type.  In general, the severity level
-             should be defined by the instrumentation based on the
-             dynamic state, rather than being defined statically by
-             the alarm type, in order to provide a relevant severity
-             level based on dynamic state and context.  However, most
-             alarm types have a defined set of possible severity
-             levels, and this should be provided here.";
-        }
-        leaf description {
-          type string;
-          mandatory true;
-          description
-            "A description of the possible alarm.  It SHOULD include
-             information on possible underlying root causes and
-             corrective actions.";
-        }
-      }
-    }
-    container summary {
-      if-feature "alarm-summary";
-      config false;
-      description
-        "This container gives a summary of the number of alarms.";
-      list alarm-summary {
-        key "severity";
-        description
-          "A global summary of all alarms in the system.  The summary
-           does not include shelved alarms.";
-        leaf severity {
-          type severity;
-          description
-            "Alarm summary for this severity level.";
-        }
-        leaf total {
-          type yang:gauge32;
-          description
-            "Total number of alarms of this severity level.";
-        }
-        leaf not-cleared {
-          type yang:gauge32;
-          description
-            "Total number of alarms of this severity level
-             that are not cleared.";
-        }
-        leaf cleared {
-          type yang:gauge32;
-          description
-            "For this severity level, the number of alarms that are
-             cleared.";
-        }
-        leaf cleared-not-closed {
-          if-feature "operator-actions";
-          type yang:gauge32;
-          description
-            "For this severity level, the number of alarms that are
-             cleared but not closed.";
-        }
-        leaf cleared-closed {
-          if-feature "operator-actions";
-          type yang:gauge32;
-          description
-            "For this severity level, the number of alarms that are
-             cleared and closed.";
-        }
-        leaf not-cleared-closed {
-          if-feature "operator-actions";
-          type yang:gauge32;
-          description
-            "For this severity level, the number of alarms that are
-             not cleared but closed.";
-        }
-        leaf not-cleared-not-closed {
-          if-feature "operator-actions";
-          type yang:gauge32;
-          description
-            "For this severity level, the number of alarms that are
-             not cleared and not closed.";
-        }
-      }
-      leaf shelves-active {
-        if-feature "alarm-shelving";
-        type empty;
-        description
-          "This is a hint to the operator that there are active
-           alarm shelves.  This leaf MUST exist if the
-           /alarms/shelved-alarms/number-of-shelved-alarms is > 0.";
-      }
-    }
-    container alarm-list {
-      config false;
-      description
-        "The alarms in the system.";
-      leaf number-of-alarms {
-        type yang:gauge32;
-        description
-          "This object shows the total number of
-           alarms in the system, i.e., the total number
-           of entries in the alarm list.";
-      }
-      leaf last-changed {
-        type yang:date-and-time;
-        description
-          "A timestamp when the alarm list was last
-           changed.  The value can be used by a manager to
-           initiate an alarm resynchronization procedure.";
-      }
-      list alarm {
-        key "resource alarm-type-id alarm-type-qualifier";
-        description
-          "The list of alarms.  Each entry in the list holds one
-           alarm for a given alarm type and resource.  An alarm can
-           be updated from the underlying resource or by the user.
-           The following leafs are maintained by the resource:
-           'is-cleared', 'last-change', 'perceived-severity', and
-           'alarm-text'.  An operator can change 'operator-state' and
-           'operator-text'.
-
-           Entries appear in the alarm list the first time an alarm
-           becomes active for a given alarm type and resource.
-           Entries do not get deleted when the alarm is cleared.
-           Clear status is represented as a boolean flag.
-
-           Alarm entries are removed, i.e., purged, from the list by
-           an explicit purge action.  For example, purge all alarms
-           that are cleared and in closed operator state that are
-           older than 24 hours.  Purged alarms are removed from the
-           alarm list.  If the alarm resource state changes after a
-           purge, the alarm will reappear in the alarm list.
-
-           Systems may also remove alarms based on locally configured
-           policies; this is out of scope for this module.";
-        uses common-alarm-parameters;
-        leaf time-created {
-          type yang:date-and-time;
-          mandatory true;
-          description
-            "The timestamp when this alarm entry was created.  This
-             represents the first time the alarm appeared; it can
-             also represent that the alarm reappeared after a purge.
-             Further state changes of the same alarm do not change
-             this leaf; these changes will update the 'last-changed'
-             leaf.";
-        }
-        uses resource-alarm-parameters;
-        list operator-state-change {
-          if-feature "operator-actions";
-          key "time";
-          description
-            "This list is used by operators to indicate the state of
-             human intervention on an alarm.  For example, if an
-             operator has seen an alarm, the operator can add a new
-             item to this list indicating that the alarm is
-             acknowledged.";
-          uses operator-parameters;
-        }
-        action set-operator-state {
-          if-feature "operator-actions";
-          description
-            "This is a means for the operator to indicate the level
-             of human intervention on an alarm.";
-          input {
-            leaf state {
-              type writable-operator-state;
-              mandatory true;
-              description
-                "Set this operator state.";
-            }
-            leaf text {
-              type string;
-              description
-                "Additional optional textual information.";
-            }
-          }
-        }
-        notification operator-action {
-          if-feature "operator-actions";
-          description
-            "This notification is used to report that an operator
-             acted upon an alarm.";
-          uses operator-parameters;
-        }
-      }
-      action purge-alarms {
-        description
-          "This operation requests that the server delete entries
-           from the alarm list according to the supplied criteria.
-
-           Typically, this operation is used to delete alarms that
-           are in closed operator state and older than a specified
-           time.
-
-           The number of purged alarms is returned as an output
-           parameter.";
-        input {
-          uses filter-input;
-        }
-        output {
-          leaf purged-alarms {
-            type uint32;
-            description
-              "Number of purged alarms.";
-          }
-        }
-      }
-      action compress-alarms {
-        if-feature "alarm-history";
-        description
-          "This operation requests that the server compress
-           entries in the alarm list by removing all but the
-           latest 'status-change' entry for all matching alarms.
-           Conditions in the input are logically ANDed.  If no
-           input condition is given, all alarms are compressed.";
-        input {
-          leaf resource {
-            type resource-match;
-            description
-              "Compress the alarms matching this resource.";
-          }
-          leaf alarm-type-id {
-            type leafref {
-              path "/alarms/alarm-list/alarm/alarm-type-id";
-              require-instance false;
-            }
-            description
-              "Compress alarms with this 'alarm-type-id'.";
-          }
-          leaf alarm-type-qualifier {
-            type leafref {
-              path "/alarms/alarm-list/alarm/alarm-type-qualifier";
-              require-instance false;
-            }
-            description
-              "Compress the alarms with this
-               'alarm-type-qualifier'.";
-          }
-        }
-        output {
-          leaf compressed-alarms {
-            type uint32;
-            description
-              "Number of compressed alarm entries.";
-          }
-        }
-      }
-    }
-    container shelved-alarms {
-      if-feature "alarm-shelving";
-      config false;
-      description
-        "The shelved alarms.  Alarms appear here if they match the
-         criteria in /alarms/control/alarm-shelving.  This list does
-         not generate any notifications.  The list represents alarms
-         that are considered not relevant by the operator.  Alarms in
-         this list have an 'operator-state' of 'shelved'.  This
-         cannot be changed.";
-      leaf number-of-shelved-alarms {
-        type yang:gauge32;
-        description
-          "This object shows the total number of current
-           alarms, i.e., the total number of entries
-           in the alarm list.";
-      }
-      leaf shelved-alarms-last-changed {
-        type yang:date-and-time;
-        description
-          "A timestamp when the shelved-alarm list was last changed.
-           The value can be used by a manager to initiate an alarm
-           resynchronization procedure.";
-      }
-      list shelved-alarm {
-        key "resource alarm-type-id alarm-type-qualifier";
-        description
-          "The list of shelved alarms.  Shelved alarms can only be
-           updated from the underlying resource; no operator actions
-           are supported.";
-        uses common-alarm-parameters;
-        leaf shelf-name {
-          type leafref {
-            path "/alarms/control/alarm-shelving/shelf/name";
-            require-instance false;
-          }
-          description
-            "The name of the shelf.";
-        }
-        uses resource-alarm-parameters;
-        list operator-state-change {
-          if-feature "operator-actions";
-          key "time";
-          description
-            "This list is used by operators to indicate the state of
-             human intervention on an alarm.  For shelved alarms, the
-             system has set the list item in the list to 'shelved'.";
-          uses operator-parameters;
-        }
-      }
-      action purge-shelved-alarms {
-        description
-          "This operation requests that the server delete entries from
-           the shelved-alarm list according to the supplied criteria.
-           In the shelved-alarm list, it makes sense to delete alarms
-           that are not relevant anymore.
-
-           The number of purged alarms is returned as an output
-           parameter.";
-        input {
-          uses filter-input;
-        }
-        output {
-          leaf purged-alarms {
-            type uint32;
-            description
-              "Number of purged alarms.";
-          }
-        }
-      }
-      action compress-shelved-alarms {
-        if-feature "alarm-history";
-        description
-          "This operation requests that the server compress entries
-           in the shelved-alarm list by removing all but the latest
-           'status-change' entry for all matching shelved alarms.
-           Conditions in the input are logically ANDed.  If no input
-           condition is given, all alarms are compressed.";
-        input {
-          leaf resource {
-            type leafref {
-              path "/alarms/shelved-alarms/shelved-alarm/resource";
-              require-instance false;
-            }
-            description
-              "Compress the alarms with this resource.";
-          }
-          leaf alarm-type-id {
-            type leafref {
-              path "/alarms/shelved-alarms/shelved-alarm"
-                 + "/alarm-type-id";
-              require-instance false;
-            }
-            description
-              "Compress alarms with this 'alarm-type-id'.";
-          }
-          leaf alarm-type-qualifier {
-            type leafref {
-              path "/alarms/shelved-alarms/shelved-alarm"
-                 + "/alarm-type-qualifier";
-              require-instance false;
-            }
-            description
-              "Compress the alarms with this
-               'alarm-type-qualifier'.";
-          }
-        }
-        output {
-          leaf compressed-alarms {
-            type uint32;
-            description
-              "Number of compressed alarm entries.";
-          }
-        }
-      }
-    }
-    list alarm-profile {
-      if-feature "alarm-profile";
-      key "alarm-type-id alarm-type-qualifier-match resource";
-      ordered-by user;
-      description
-        "This list is used to assign further information or
-         configuration for each alarm type.  This module supports a
-         mechanism where the client can override the system-default
-         alarm severity levels.  The 'alarm-profile' is also a useful
-         augmentation point for specific additions to alarm types.";
-      leaf alarm-type-id {
-        type alarm-type-id;
-        description
-          "The alarm type identifier to match.";
-      }
-      leaf alarm-type-qualifier-match {
-        type string;
-        description
-          "An XML Schema regular expression that is used to match the
-           alarm type qualifier.";
-        reference
-          "XML Schema Part 2: Datatypes Second Edition,
-             World Wide Web Consortium Recommendation
-             REC-xmlschema-2-20041028";
-      }
-      leaf resource {
-        type resource-match;
-        description
-          "Specifies which resources to match.";
-      }
-      leaf description {
-        type string;
-        mandatory true;
-        description
-          "A description of the alarm profile.";
-      }
-      container alarm-severity-assignment-profile {
-        if-feature "severity-assignment";
-        description
-          "The client can override the system-default severity
-           level.";
-        reference
-          "ITU-T Recommendation M.3100:
-             Generic network information model
-           ITU-T Recommendation M.3160:
-             Generic, protocol-neutral management information model";
-        leaf-list severity-level {
-          type severity;
-          ordered-by user;
-          description
-            "Specifies the configured severity level(s) for the
-             matching alarm.  If the alarm has several severity
-             levels, the leaf-list shall be given in rising severity
-             order.  The original M3100/M3160 ASAP function only
-             allows for a one-to-one mapping between alarm type and
-             severity, but since YANG module supports stateful
-             alarms, the mapping must allow for several severity
-             levels.
-
-             Assume a high-utilization alarm type with two thresholds
-             with the system-default severity levels of threshold1 =
-             warning and threshold2 = minor.  Setting this leaf-list
-             to (minor, major) will assign the severity levels as
-             threshold1 = minor and threshold2 = major";
-        }
-      }
-    }
-  }
-
-  /*
-   * Notifications
-   */
-
-  notification alarm-notification {
-    description
-      "This notification is used to report a state change for an
-       alarm.  The same notification is used for reporting a newly
-       raised alarm, a cleared alarm, or changing the text and/or
-       severity of an existing alarm.";
-    uses common-alarm-parameters;
-    uses alarm-state-change-parameters;
-  }
-
-  notification alarm-inventory-changed {
-    description
-      "This notification is used to report that the list of possible
-       alarms has changed.  This can happen when, for example, a new
-       software module is installed or a new physical card is
-       inserted.";
-  }
-}