diff options
| author |   Timoney, Dan (dt5972) <dt5972@att.com> | 2018-06-13 11:11:29 -0400 |
|---|---|---|
| committer | Timoney, Dan (dt5972) <dt5972@att.com> | 2018-06-13 11:11:29 -0400 |
| commit | 056e82aa242f7df59c72dc967f38d479c51f7509 (patch) | |
| tree | 3131114c65277c3d991feed0e82e60909caeac84 | |
| parent | 85947fd27e2c0cee9cbc237cfd2c8a440b913832 (diff) | |
Restructure CCSDK documentation
Remove empty repo-specific documents in favor of meaningful
project-level documentation.
Change-Id: I18f2db7f68895df2d71450eee7e56723d74f7f5a
Issue-ID: CCSDK-300
Signed-off-by: Timoney, Dan (dt5972) <dt5972@att.com>
38 files changed, 69 insertions, 1608 deletions
diff --git a/docs/index.rst b/docs/index.rst index b53fd396..14a0026e 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -6,9 +6,6 @@ Common Controller Software Development Kit :maxdepth: 1 platform/plugins/index.rst - sli/core/index.rst - sli/adaptors/index.rst - sli/northbound/index.rst - sli/plugins/index.rst + sli/index.rst release-notes.rst diff --git a/docs/sli/adaptors/architecture.rst b/docs/sli/adaptors/architecture.rst deleted file mode 100644 index 8daa0d3b..00000000 --- a/docs/sli/adaptors/architecture.rst +++ /dev/null @@ -1,27 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Architecture -============ - -.. note:: - * This section is used to describe a software component from a high level - view of capability, common usage scenarios, and interactions with other - components required in the usage scenarios. - - * The architecture section is typically: provided in a platform-component - and sdk collections; and referenced from developer and user guides. - - * This note must be removed after content has been added. - - -Capabilities ------------- - - -Usage Scenarios ---------------- - - -Interactions ------------- diff --git a/docs/sli/adaptors/build.rst b/docs/sli/adaptors/build.rst deleted file mode 100644 index 0a4c308e..00000000 --- a/docs/sli/adaptors/build.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Build -===== - - -Environment ------------ -Requires maven release 3.3 or greater - -Steps ------ -To compile this code: - -1. Make sure your local Maven settings file ($HOME/.m2/settings.xml) contains references to the ONAP repositories and OpenDaylight repositories. - -2. To compile, run "mvn clean install".
\ No newline at end of file diff --git a/docs/sli/adaptors/index.rst b/docs/sli/adaptors/index.rst deleted file mode 100644 index 3156c8ab..00000000 --- a/docs/sli/adaptors/index.rst +++ /dev/null @@ -1,12 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -CCSDK Service Logic Interpretor Adaptors ----------------------------------------- -.. toctree:: - :maxdepth: 1 - - architecture.rst - offeredapis.rst - logging.rst - build.rst - release-notes.rst diff --git a/docs/sli/adaptors/offeredapis.rst b/docs/sli/adaptors/offeredapis.rst deleted file mode 100644 index e20c786c..00000000 --- a/docs/sli/adaptors/offeredapis.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Offered APIs -============ - diff --git a/docs/sli/adaptors/release-notes.rst b/docs/sli/adaptors/release-notes.rst deleted file mode 100644 index b4516570..00000000 --- a/docs/sli/adaptors/release-notes.rst +++ /dev/null @@ -1,46 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -Release Notes -============= - -.. note:: - * This Release Notes must be updated each time the team decides to Release new artifacts. - * The scope of this Release Notes is for this particular component. In other words, each ONAP component has its Release Notes. - * This Release Notes is cumulative, the most recently Released artifact is made visible in the top of this Release Notes. - * Except the date and the version number, all the other sections are optional but there must be at least one section describing the purpose of this new release. - * This note must be removed after content has been added. - - -Version: x.y.z --------------- - - -:Release Date: yyyy-mm-dd - - - -**New Features** - -One or two sentences explaining the purpose of this Release. - -**Bug Fixes** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and a sentence explaining what this defect is addressing. -**Known Issues** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and two, three sentences. - One sentences explaining what is the issue. - - Another sentence explaining the impact of the issue. - - And an optional sentence providing a workaround. - -**Security Issues** - You may want to include a reference to CVE (Common Vulnerabilities and Exposures) `CVE <https://cve.mitre.org>`_ - - -**Upgrade Notes** - -**Deprecation Notes** - -**Other** - -===========
\ No newline at end of file diff --git a/docs/sli/northbound/apis/asdcApi.rst b/docs/sli/apis/asdcApi.rst index c9091401..c9091401 100644 --- a/docs/sli/northbound/apis/asdcApi.rst +++ b/docs/sli/apis/asdcApi.rst diff --git a/docs/sli/northbound/apis/dataChange.rst b/docs/sli/apis/dataChange.rst index 9a9dc044..9a9dc044 100644 --- a/docs/sli/northbound/apis/dataChange.rst +++ b/docs/sli/apis/dataChange.rst diff --git a/docs/sli/core/apis/sliapi.rst b/docs/sli/apis/sliapi.rst index 13cdcbd5..13cdcbd5 100644 --- a/docs/sli/core/apis/sliapi.rst +++ b/docs/sli/apis/sliapi.rst diff --git a/docs/sli/architecture.rst b/docs/sli/architecture.rst new file mode 100644 index 00000000..a211cc6f --- /dev/null +++ b/docs/sli/architecture.rst @@ -0,0 +1,29 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 + +Architecture +============ + +Repositories +------------ +CCSDK contains the following repositories to support service logic (aka directed graph) +development: + +- ccsdk/parent : contains parent poms, which contain common properties, plugin settings, etc +- ccsdk/sli/core : contains the core components needed to compile and execute directed graphs +- ccsdk/sli/adaptors : contains adaptors to provide access to resources from within directed graphs +- ccsdk/sli/northbound : contains code for northbound interfaces that maybe used by CCSDK clients +- ccsdk/sli/plugins : contains code to be called from directed graph "execute" nodes + +Capabilities +------------ +Provides the core Service Logic Interpreter (SLI) functionality, used to execute directed graphs (DGs). Directed graphs allow service designers to define the +logic to be executed within the SDN controller in a graphical format which can be +updated in real time, without a need to restart the controller. + +.. toctree:: + :maxdepth: 1 + + nodes.rst + + diff --git a/docs/sli/build.rst b/docs/sli/build.rst new file mode 100644 index 00000000..3d9ccdb9 --- /dev/null +++ b/docs/sli/build.rst @@ -0,0 +1,30 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 + +Build +===== + + +Environment +----------- +Requires maven release 3.3 or greater + +Steps +----- +To compile this code: + +1. Make sure your local Maven settings file ($HOME/.m2/settings.xml) contains references to the ONAP repositories and OpenDaylight repositories. + +2. To compile all of CCSDK SLI code + - git clone http://gerrit.onap.org/r/ccsdk/parent + - cd parent ; mvn clean install ; cd .. + - mkdir sli ; cd sli + - git clone http://gerrit.onap.org/r/ccsdk/sli/core + - git clone http://gerrit.onap.org/r/ccsdk/sli/adaptors + - git clone http://gerrit.onap.org/r/ccsdk/sli/northbound + - git clone http://gerrit.onap.org/r/ccsdk/sli/plugins + - cd core ; mvn clean install + - cd ../adaptors ; mvn clean install + - cd ../northbound ; mvn clean install + - cd ../plugins ; mvn clean install +
\ No newline at end of file diff --git a/docs/sli/core/architecture.rst b/docs/sli/core/architecture.rst deleted file mode 100644 index f6101a11..00000000 --- a/docs/sli/core/architecture.rst +++ /dev/null @@ -1,20 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Architecture -============ - - - -Capabilities ------------- -Provides the core Service Logic Interpreter (SLI) functionality, used to execute directed graphs (DGs). Directed graphs allow service designers to define the -logic to be executed within the SDN controller in a graphical format which can be -updated in real time, without a need to restart the controller. - -.. toctree:: - :maxdepth: 1 - - nodes.rst - - diff --git a/docs/sli/core/build.rst b/docs/sli/core/build.rst deleted file mode 100644 index 0a4c308e..00000000 --- a/docs/sli/core/build.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Build -===== - - -Environment ------------ -Requires maven release 3.3 or greater - -Steps ------ -To compile this code: - -1. Make sure your local Maven settings file ($HOME/.m2/settings.xml) contains references to the ONAP repositories and OpenDaylight repositories. - -2. To compile, run "mvn clean install".
\ No newline at end of file diff --git a/docs/sli/core/logging.rst b/docs/sli/core/logging.rst deleted file mode 100644 index 187eb03b..00000000 --- a/docs/sli/core/logging.rst +++ /dev/null @@ -1,14 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Logging -======= -CCSDK uses slf4j to log messages to the standard OpenDaylight karaf.log -log file. - -Where to Access Information ---------------------------- -Logs are found within the SDNC docker container, in the directory -/opt/opendaylight/current/data/logs. - - diff --git a/docs/sli/core/offeredapis.rst b/docs/sli/core/offeredapis.rst deleted file mode 100644 index 42eafdd4..00000000 --- a/docs/sli/core/offeredapis.rst +++ /dev/null @@ -1,12 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Offered APIs -============ - -.. toctree:: - :maxdepth: 1 - :titlesonly: - - apis/sliapi.rst - diff --git a/docs/sli/core/release-notes.rst b/docs/sli/core/release-notes.rst deleted file mode 100644 index b4516570..00000000 --- a/docs/sli/core/release-notes.rst +++ /dev/null @@ -1,46 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -Release Notes -============= - -.. note:: - * This Release Notes must be updated each time the team decides to Release new artifacts. - * The scope of this Release Notes is for this particular component. In other words, each ONAP component has its Release Notes. - * This Release Notes is cumulative, the most recently Released artifact is made visible in the top of this Release Notes. - * Except the date and the version number, all the other sections are optional but there must be at least one section describing the purpose of this new release. - * This note must be removed after content has been added. - - -Version: x.y.z --------------- - - -:Release Date: yyyy-mm-dd - - - -**New Features** - -One or two sentences explaining the purpose of this Release. - -**Bug Fixes** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and a sentence explaining what this defect is addressing. -**Known Issues** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and two, three sentences. - One sentences explaining what is the issue. - - Another sentence explaining the impact of the issue. - - And an optional sentence providing a workaround. - -**Security Issues** - You may want to include a reference to CVE (Common Vulnerabilities and Exposures) `CVE <https://cve.mitre.org>`_ - - -**Upgrade Notes** - -**Deprecation Notes** - -**Other** - -===========
\ No newline at end of file diff --git a/docs/sli/core/index.rst b/docs/sli/index.rst index 2055f178..7b864583 100644 --- a/docs/sli/core/index.rst +++ b/docs/sli/index.rst @@ -1,13 +1,14 @@ .. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 + + +Directed Graph Support (Service Logic Interpreter) +================================================== -CCSDK Service Logic Interpreter -------------------------------- .. toctree:: :maxdepth: 1 architecture.rst - offeredapis.rst - logging.rst build.rst - release-notes.rst - + logging.rst + offeredapis.rst diff --git a/docs/sli/adaptors/logging.rst b/docs/sli/logging.rst index 187eb03b..187eb03b 100644 --- a/docs/sli/adaptors/logging.rst +++ b/docs/sli/logging.rst diff --git a/docs/sli/core/nodes.rst b/docs/sli/nodes.rst index 3bdeabcf..3bdeabcf 100644 --- a/docs/sli/core/nodes.rst +++ b/docs/sli/nodes.rst diff --git a/docs/sli/northbound/architecture.rst b/docs/sli/northbound/architecture.rst deleted file mode 100644 index f2648df3..00000000 --- a/docs/sli/northbound/architecture.rst +++ /dev/null @@ -1,12 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Architecture -============ - - -Capabilities ------------- -This repository contains source code and Yang models for the northbound interfaces -used to process updates from SDC (ASDC-API) and for processing data change notifications -from A&AI (dataChange). diff --git a/docs/sli/northbound/build.rst b/docs/sli/northbound/build.rst deleted file mode 100644 index 0a4c308e..00000000 --- a/docs/sli/northbound/build.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Build -===== - - -Environment ------------ -Requires maven release 3.3 or greater - -Steps ------ -To compile this code: - -1. Make sure your local Maven settings file ($HOME/.m2/settings.xml) contains references to the ONAP repositories and OpenDaylight repositories. - -2. To compile, run "mvn clean install".
\ No newline at end of file diff --git a/docs/sli/northbound/index.rst b/docs/sli/northbound/index.rst deleted file mode 100644 index 9be06c84..00000000 --- a/docs/sli/northbound/index.rst +++ /dev/null @@ -1,13 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -CCSDK SLI Northbound API ------------------------- -.. toctree:: - :maxdepth: 1 - - architecture.rst - offeredapis.rst - logging.rst - build.rst - release-notes.rst - diff --git a/docs/sli/northbound/logging.rst b/docs/sli/northbound/logging.rst deleted file mode 100644 index 187eb03b..00000000 --- a/docs/sli/northbound/logging.rst +++ /dev/null @@ -1,14 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Logging -======= -CCSDK uses slf4j to log messages to the standard OpenDaylight karaf.log -log file. - -Where to Access Information ---------------------------- -Logs are found within the SDNC docker container, in the directory -/opt/opendaylight/current/data/logs. - - diff --git a/docs/sli/northbound/nodes.rst b/docs/sli/northbound/nodes.rst deleted file mode 100644 index 3bdeabcf..00000000 --- a/docs/sli/northbound/nodes.rst +++ /dev/null @@ -1,1031 +0,0 @@ ---- Service Logic Interpreter --- Dan Timoney --- 2014-11-12 --- - -Supported node types -==================== - -The following built-in node types are currently supported: - -- Flow Control - - - `**block** <#Block_node>`__ - - - `**call** <#Call_node>`__ - - - `**for** <#For_node>`__ - - - `**return** <#Return_node>`__ - - - `**set** <#Set_node>`__ - - - `**switch** <#Switch_node>`__ - -- Device Management - - - `**configure** <#Configure_node>`__ - -- Java Plugin Support - - - `**execute** <#Execute_node>`__ - -- Recording - - - `**record** <#Record_node>`__ - -- Resource Management - - - `**delete** <#Delete_node>`__ - - - `**exists** <#Exists_node>`__ - - - `**get-resource** <#Get-resource_node>`__ - - - `**is-available** <#Is-available_node>`__ - - - `**notify** <#Notify_node>`__ - - - `**release** <#Release_node>`__ - - - `**reserve** <#Reserve_node>`__ - - - `**save** <#Save_node>`__ - - - `**update** <#Update_node>`__ - -Flow Control ------------- - -Block node -~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **block** node is used to executes a set of nodes. - -Attributes -^^^^^^^^^^ - -+--------------+-----------------------------------------------------------------------------------------------------------------------------------+ -| **atomic** | if *true*, then if a node returns failure, subsequent nodes will not be executed and nodes already executed will be backed out. | -+--------------+-----------------------------------------------------------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -None - -Example -^^^^^^^ - -:: - - <block> - <record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder"> - <parameter name="file" value="/tmp/sample_r1.log" /> - <parameter name="field1" value="__TIMESTAMP__"/> - <parameter name="field2" value="RESERVED"/> - <parameter name="field3" value="$asePort.uni_circuit_id"/> - </record> - <return status="success"> - <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" /> - </return> - </block> - -Call node -~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **call** node is used to call another graph - -Attributes -^^^^^^^^^^ - -+---------------+------------------------------------------------------------------------------------+ -| **module** | Module of directed graph to call. If unset, defaults to that of calling graph | -+---------------+------------------------------------------------------------------------------------+ -| **rpc** | rpc of directed graph to call. | -+---------------+------------------------------------------------------------------------------------+ -| **version** | version of graph to call, If unset, uses active version. | -+---------------+------------------------------------------------------------------------------------+ -| **mode** | mode (sync/async) of graph to call. If unset, defaults to that of calling graph. | -+---------------+------------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -Not applicable - -Outcomes -^^^^^^^^ - -+-----------------+------------------------------+ -| **success** | Sub graph returned success | -+-----------------+------------------------------+ -| **not-found** | Graph not found | -+-----------------+------------------------------+ -| **failure** | Subgraph returned success | -+-----------------+------------------------------+ - -Table: . - -Example -^^^^^^^ - -:: - - <call rpc="svc-topology-reserve" mode="sync" /> - -For node -~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **for** node provides a fixed iteration looping mechanism, similar to -the Java for loop - -Attributes -^^^^^^^^^^ - -+-------------+------------------+ -| **index** | index variable | -+-------------+------------------+ -| **start** | initial value | -+-------------+------------------+ -| **end** | maximum value | -+-------------+------------------+ - -Parameters -^^^^^^^^^^ - -Not applicable. - -Outcomes -^^^^^^^^ - -Not applicable. The **status** node has no outcomes. - -Example -^^^^^^^ - -:: - - <for index="i" start="0" end="`$service-data.universal-cpe-ft.l2-switch-interfaces_length`"> - <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder"> - <parameter name="logger" value="message-log"/> - <parameter name="level" value="info"/> - <parameter name="field1" value="`'current l2-switch-interface name is ' + $service-data.universal-cpe-ft.l2-switch-interfaces[$i].name`"/> - </record> - </for> - -Return node -~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **return** node is used to return a status to the invoking MD-SAL -application - -Attributes -^^^^^^^^^^ - -+--------------+---------------------------------------------------+ -| **status** | Status value to return (*success* or *failure*) | -+--------------+---------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -The following optional parameters may be passed to convey more detailed -status information. - -+---------------------+-----------------------------------------------------------------+ -| **error-code** | A brief, usually numeric, code indicating the error condition | -+---------------------+-----------------------------------------------------------------+ -| **error-message** | A more detailed error message | -+---------------------+-----------------------------------------------------------------+ - -Outcomes -^^^^^^^^ - -Not applicable. The **status** node has no outcomes. - -Example -^^^^^^^ - -:: - - <return status="failure"> - <parameter name="error-code" value="1542" /> - <parameter name="error-message" value="Activation failure" /> - </return> - -Set node -~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **set** node is used to set one or more values in the execution -context - -Attributes -^^^^^^^^^^ - -+---------------------+-------------------------------------------------------------------------------------+ -| **only-if-unset** | If true the set node will only execute if the current value of the target is null | -+---------------------+-------------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -Values to be set are passed as parameters - -Outcomes -^^^^^^^^ - -Not applicable. The **set** node has no outcomes. - -Example -^^^^^^^ - -:: - - <set> - <parameter name="vlan" value="$network.provider-segmentation-id" /> - </set> - -Switch node -~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **switch** node is used to make a decision based on its **test** -attribute. - -Attributes -^^^^^^^^^^ - -+------------+---------------------+ -| **test** | Condition to test | -+------------+---------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -Depends on the **test** condition - -Example -^^^^^^^ - -:: - - <switch test="$uni-cir-units"> - <outcome value="Mbps"> - <reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource" - resource="ase-port" - key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value" - pfx="asePort"> - - <outcome value="success"> - <return status="success"> - <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" /> - </return> - </outcome> - <outcome value="Other"> - <return status="failure"> - <parameter name="error-code" value="1010" /> - <parameter name="error-message" value="No ports found that match criteria" /> - </return> - </outcome> - </reserve> - </outcome> - <outcome value="Gbps"> - <reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource" - resource="ase-port" - key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value*1000" - pfx="asePort"> - - <outcome value="success"> - <return status="success"> - <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" /> - </return> - </outcome> - <outcome value="Other"> - <return status="failure"> - <parameter name="error-code" value="1010" /> - <parameter name="error-message" value="No ports found that match criteria" /> - </return> - </outcome> - </reserve> - </outcome> - </switch> - -Device Management ------------------ - -Configure node -~~~~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **configure** node is used to configure a device. - -Attributes -^^^^^^^^^^ - -+----------------+-----------------------------------------------------------------------------------+ -| **adaptor** | Fully qualified Java class of resource adaptor to be used | -+----------------+-----------------------------------------------------------------------------------+ -| **activate** | Activate device/interface, for devices that support a separate activation step. | -+----------------+-----------------------------------------------------------------------------------+ -| **key** | SQL-like string specifying criteria for item to configure | -+----------------+-----------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -Specific to device adaptor. - -Outcomes -^^^^^^^^ - -+----------------------+------------------------------------------------------------------+ -| **success** | Device successfully configured | -+----------------------+------------------------------------------------------------------+ -| **not-found** | Element to be configured does not exist. | -+----------------------+------------------------------------------------------------------+ -| **not-ready** | Element is not in a state where it can be configured/activated | -+----------------------+------------------------------------------------------------------+ -| **already-active** | Attempt to activate element that is already active | -+----------------------+------------------------------------------------------------------+ -| **failure** | Configure failed for some other reason | -+----------------------+------------------------------------------------------------------+ - -Example -^^^^^^^ - -:: - - <configure adaptor="org.onap.ccsdk.sli.adaptors.emt.EmtAdaptor" - key="$uni-circuit-id" activate="true"> - <parameter name="circuit.id" value="$uni-circuit-id" /> - <parameter name="subscriber.name" value="$subscriber-name" /> - <parameter name="emt.clli" value="$edge-device-clli" /> - <parameter name="port.tagging" value="$port-tagging" /> - <parameter name="port.mediaSpeed" value="$media-speed" /> - <parameter name="location.state" value="$uni-location-state" /> - <parameter name="location.city" value="$uni-location-city" /> - <parameter name="cosCategory" value="$cos-category" /> - <parameter name="gosProfile" value="$gos-profile" /> - <parameter name="lldp" value="$asePort.resource-lldp" /> - <parameter name="mtu" value="$asePort.resource-mtu" /> - <outcome value="success"> - <block> - <record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder"> - <parameter name="file" value="/tmp/sample_r1.log" /> - <parameter name="field1" value="__TIMESTAMP__"/> - <parameter name="field2" value="ACTIVE"/> - <parameter name="field3" value="$uni-circuit-id"/> - </record> - <return status="success"> - <parameter name="edge-device-clli" value="$asePort.resource-emt-clli" /> - </return> - </block> - </outcome> - <outcome value="already-active"> - <return status="failure"> - <parameter name="error-code" value="1590" /> - <parameter name="error-message" value="Port already active" /> - </return> - </outcome> - <outcome value="Other"> - <return status="failure"> - <parameter name="error-code" value="1542" /> - <parameter name="error-message" value="Activation failure" /> - </return> - </outcome> - </configure> - -Java Plugin Support -------------------- - -Execute node -~~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -An **execute** node is used to execute Java code supplied as a plugin - -Attributes -^^^^^^^^^^ - -+--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of plugin to be used | -+--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ -| **method** | Name of method in the plugin class to execute. Method must return void, and take 2 arguments: a Map (for parameters) and a SvcLogicContext (to allow plugin read/write access to context memory) | -+--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -Specific to plugin / method - -Outcomes -^^^^^^^^ - -+--------------------------+-----------------------------------------------------------------+ -| **success** | Device successfully configured | -+--------------------------+-----------------------------------------------------------------+ -| **not-found** | Plugin class could not be loaded | -+--------------------------+-----------------------------------------------------------------+ -| **unsupported-method** | Named method taking (Map, SvcLogicContext) could not be found | -+--------------------------+-----------------------------------------------------------------+ -| **failure** | Configure failed for some other reason | -+--------------------------+-----------------------------------------------------------------+ - -Example -^^^^^^^ - -:: - - <execute plugin="org.onap.ccsdk.sli.plugins.HelloWorld" - method="log"> - <parameter name="message" value="Hello, world!" /> - <outcome value="success"> - <return status="success"/> - </outcome> - <outcome value="not-found"> - <return status="failure"> - <parameter name="error-code" value="1590" /> - <parameter name="error-message" value="Could not locate plugin" /> - </return> - </outcome> - <outcome value="Other"> - <return status="failure"> - <parameter name="error-code" value="1542" /> - <parameter name="error-message" value="Internal error" /> - </return> - </outcome> - </execute> - -Recording ---------- - -Record node -~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **record** node is used to record an event. For example, this might be -used to log provisioning events. - -Attributes -^^^^^^^^^^ - -+--------------+---------------------------------------------------+ -| **plugin** | Fully qualified Java class to handle recording. | -+--------------+---------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -Parameters will depend on the plugin being used. For the FileRecorder -class, the parameters are as follows - -+--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ -| **file** | The file to which the record should be written | -+--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ -| **field1** | First field to write. There will be **field** parameters for each field to write, from **field1** through **fieldN**. A special value \_\_TIMESTAMP\_\_ may be assigned to a field to insert the current timestamp | -+--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ - -Outcomes -^^^^^^^^ - -+---------------+--------------------------------------------+ -| **success** | Record successfully written | -+---------------+--------------------------------------------+ -| **failure** | Record could not be successfully written | -+---------------+--------------------------------------------+ - -Example -^^^^^^^ - -:: - - <record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder"> - <parameter name="file" value="/tmp/sample_r1.log" /> - <parameter name="field1" value="__TIMESTAMP__"/> - <parameter name="field2" value="ACTIVE"/> - <parameter name="field3" value="$uni-circuit-id"/> - </record> - -Resource Management -------------------- - -Delete node -~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **delete** node is used to delete a resource from the local resource -inventory. - -Attributes -^^^^^^^^^^ - -+----------------+-------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+-------------------------------------------------------------+ -| **resource** | Type of resource to delete | -+----------------+-------------------------------------------------------------+ -| **key** | SQL-like string specifying key to delete | -+----------------+-------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -+---------------+--------------------------------------------+ -| **success** | Resource specified deleted successfully. | -+---------------+--------------------------------------------+ -| *failure*> | Resource specified was not deleted | -+---------------+--------------------------------------------+ - -Example -^^^^^^^ - -:: - - <delete plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource" - resource="ase-port" - key="uni_circuit_id == $uni-circuit-id"> - <outcome value="true"> - <return status="success"/> - </outcome> - <outcome value="false"> - <return status="failure"/> - </outcome> - </delete> - -Exists node -~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -An **exists** node is used to determine whether a particular instance of -a resource exists. For example, this might be used to test whether a -particular switch CLLI is provisioned. - -Attributes -^^^^^^^^^^ - -+----------------+-------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+-------------------------------------------------------------+ -| **resource** | Type of resource to check | -+----------------+-------------------------------------------------------------+ -| **key** | SQL-like string specifying key to check for | -+----------------+-------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -+-------------+---------------------------------+ -| **true** | Resource specified exists. | -+-------------+---------------------------------+ -| **false** | Resource specified is unknown | -+-------------+---------------------------------+ - -Example -^^^^^^^ - -:: - - <exists plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource" - resource="ase-port" - key="uni_circuit_id == $uni-circuit-id"> - <outcome value="true"> - <return status="success"/> - </outcome> - <outcome value="false"> - <return status="failure"/> - </outcome> - </exists> - -Get-resource node -~~~~~~~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **get-resource** node is used to retrieve information about a -particular resource and make it available to other nodes in the service -logic tree. For example, this might be used to retrieve information -about a particular uni-port. - -Attributes -^^^^^^^^^^ - -+----------------+------------------------------------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+------------------------------------------------------------------------------------------+ -| **resource** | Type of resource to retrieve | -+----------------+------------------------------------------------------------------------------------------+ -| **key** | SQL-like string specifying criteria for retrieval | -+----------------+------------------------------------------------------------------------------------------+ -| **pfx** | Prefix to add to context variable names set for data retrieved | -+----------------+------------------------------------------------------------------------------------------+ -| **select** | String to specify, if key matches multiple entries, which entry should take precedence | -+----------------+------------------------------------------------------------------------------------------+ -| **order-by** | Prefix to add to context variable names set for data retrieved | -+----------------+------------------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -+-----------------+--------------------------------------------------+ -| **success** | Resource successfully retrieved | -+-----------------+--------------------------------------------------+ -| **not-found** | Resource referenced does not exist | -+-----------------+--------------------------------------------------+ -| **failure** | Resource retrieve failed for some other reason | -+-----------------+--------------------------------------------------+ - -Example -^^^^^^^ - -:: - - <get-resource plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource" - resource="ase-port" - key="uni_circuit_id == $uni-circuit-id" - pfx="current-port"> - <outcome value="success"> - <return status="success"/> - </outcome> - <outcome value="not-found"> - <return status="failure"/> - </outcome> - <outcome value="failure"> - <return status="failure"/> - </outcome> - </get-resource> - -Is-available node -~~~~~~~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -An **is-available** node is used to determine whether a particular type -of resource is available. For example, this might be used to test -whether any ports are available for assignment on a particular switch. - -Attributes -^^^^^^^^^^ - -+----------------+------------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+------------------------------------------------------------------+ -| **resource** | Type of resource to check | -+----------------+------------------------------------------------------------------+ -| **key** | SQL-like string specifying key to check for | -+----------------+------------------------------------------------------------------+ -| **pfx** | Prefix to add to context variable names set for data retrieved | -+----------------+------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -+-------------+---------------------------------------+ -| **true** | Resource requested is available | -+-------------+---------------------------------------+ -| **false** | Resource requested is not available | -+-------------+---------------------------------------+ - -Example -^^^^^^^ - -:: - - <is-available plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource" - resource="ase-port" - key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"> - <outcome value="true"> - <return status="success"/> - </outcome> - <outcome value="false"> - <return status="failure"/> - </outcome> - </is-available> - -Notify node -~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **notify** node is used to inform an external application (e.g. A&AI) -that a resource was updated. - -Attributes -^^^^^^^^^^ - -+----------------+---------------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+---------------------------------------------------------------------+ -| **resource** | Identifies resource that was updated | -+----------------+---------------------------------------------------------------------+ -| **action** | Action that triggered notification to be sent (ADD/UPDATE/DELETE) | -+----------------+---------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -+---------------+----------------------------------------+ -| **success** | Notification was successful | -+---------------+----------------------------------------+ -| **failure** | Notification failed is not available | -+---------------+----------------------------------------+ - -Example -^^^^^^^ - -:: - - <notify plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource" - resource="ase-port" - action="ADD"> - <outcome value="success"> - <return status="success"/> - </outcome> - <outcome value="Other"> - <return status="failure"/> - </outcome> - </notify> - -Release node -~~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **release** node is used to mark a resource as no longer in use, and -thus available for assignment. - -Attributes -^^^^^^^^^^ - -+----------------+------------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+------------------------------------------------------------------+ -| **resource** | Type of resource to release | -+----------------+------------------------------------------------------------------+ -| **key** | SQL-like string specifying key to check of resource to release | -+----------------+------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -+-----------------+-------------------------------------------------+ -| **success** | Resource successfully released | -+-----------------+-------------------------------------------------+ -| **not-found** | Resource referenced does not exist | -+-----------------+-------------------------------------------------+ -| **failure** | Resource release failed for some other reason | -+-----------------+-------------------------------------------------+ - -Example -^^^^^^^ - -:: - - <release plugin="org.onap.ccsdk.sli.adaptors.SampleServiceResource" - resource="ase-port" - key="uni_circuit_id == $uni-circuit-id"> - <outcome value="success"> - <return status="success"/> - </outcome> - <outcome value="not-found"> - <return status="failure"/> - </outcome> - <outcome value="failure"> - <return status="failure"/> - </outcome> - </release> - -Reserve node -~~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **reserve** node is used to reserve a particular type of resource.. -For example, this might be used to reserve a port on a particular -switch. - -Attributes -^^^^^^^^^^ - -+----------------+----------------------------------------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+----------------------------------------------------------------------------------------------+ -| **resource** | Type of resource to reserve | -+----------------+----------------------------------------------------------------------------------------------+ -| **key** | SQL-like string specifying criteria for reservation | -+----------------+----------------------------------------------------------------------------------------------+ -| **select** | String to specify, if **key** matches multiple entries, which entry should take precedence | -+----------------+----------------------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -None - -Outcomes -^^^^^^^^ - -+---------------+----------------------------------------------------+ -| **success** | Resource requested was successfully reserved | -+---------------+----------------------------------------------------+ -| **failure** | Resource requested was not successfully reserved | -+---------------+----------------------------------------------------+ - -Example -^^^^^^^ - -:: - - <reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource" - resource="ase-port" - key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value" - select="min(speed)"> - <outcome value="success"> - <return status="success"/> - </outcome> - <outcome value="failure"> - <return status="failure"/> - </outcome> - </reserve> - -Save node -~~~~~~~~~ - -Description -^^^^^^^^^^^ - -A **save** node is used to save information about a particular resource -to persistent storage. For example, this might be used to save -information about a particular uni-port. - -Attributes -^^^^^^^^^^ - -+----------------+------------------------------------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+------------------------------------------------------------------------------------------+ -| **resource** | Type of resource to save | -+----------------+------------------------------------------------------------------------------------------+ -| **key** | SQL-like string specifying criteria for retrieval | -+----------------+------------------------------------------------------------------------------------------+ -| **force** | If "true", save resource even if this resource is already stored in persistent storage | -+----------------+------------------------------------------------------------------------------------------+ -| **pfx** | Prefix to be prepended to variable names, when attributes are set in SvcLogicContext | -+----------------+------------------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -Values to save (columns) are specified as parameters, with each name -corresponding to a column name and each value corresponding to the value -to set. - -Outcomes -^^^^^^^^ - -+---------------+-------------------------------+ -| **success** | Resource successfully saved | -+---------------+-------------------------------+ -| **failure** | Resource save failed | -+---------------+-------------------------------+ - -Example -^^^^^^^ - -:: - - <save plugin="`$sample-resource-plugin`" resource="vnf" - key="vnf-name = $requests.vnf.vnf-name" force="true" - pfx="requests.vnf"> - <parameter name="vnf-name" - value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" /> - <parameter name="vnf-type" value="vce" /> - <parameter name="orchestration-status" value="pending-create" /> - <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" /> - <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" /> - <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" /> - </save> - -Update node -~~~~~~~~~~~ - -Description -^^^^^^^^^^^ - -An **update** node is used to update information about a particular -resource to persistent storage. - -Attributes -^^^^^^^^^^ - -+----------------+----------------------------------------------------------------------------------------+ -| **plugin** | Fully qualified Java class of resource adaptor to be used | -+----------------+----------------------------------------------------------------------------------------+ -| **resource** | Type of resource to update | -+----------------+----------------------------------------------------------------------------------------+ -| **key** | SQL-like string specifying criteria for retrieval | -+----------------+----------------------------------------------------------------------------------------+ -| **pfx** | Prefix to be prepended to variable names, when attributes are set in SvcLogicContext | -+----------------+----------------------------------------------------------------------------------------+ - -Parameters -^^^^^^^^^^ - -Values to save (columns) are specified as parameters, with each name -corresponding to a column name and each value corresponding to the value -to set. - -Outcomes -^^^^^^^^ - -+---------------+-------------------------------+ -| **success** | Resource successfully saved | -+---------------+-------------------------------+ -| **failure** | Resource save failed | -+---------------+-------------------------------+ - -Example -^^^^^^^ - -:: - - <update plugin="`$sample-resource-plugin`" resource="vnf" - key="vnf-name = $requests.vnf.vnf-name" - pfx="requests.vnf"> - <parameter name="vnf-name" - value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" /> - <parameter name="vnf-type" value="vce" /> - <parameter name="orchestration-status" value="pending-create" /> - <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" /> - <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" /> - <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" /> - </update> diff --git a/docs/sli/northbound/release-notes.rst b/docs/sli/northbound/release-notes.rst deleted file mode 100644 index 21ff338c..00000000 --- a/docs/sli/northbound/release-notes.rst +++ /dev/null @@ -1,45 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -Release Notes -============= - -.. note:: - * This Release Notes must be updated each time the team decides to Release new artifacts. - * The scope of this Release Notes is for this particular component. In other words, each ONAP component has its Release Notes. - * This Release Notes is cumulative, the most recently Released artifact is made visible in the top of this Release Notes. - * Except the date and the version number, all the other sections are optional but there must be at least one section describing the purpose of this new release. - * This note must be removed after content has been added. - - -Version: x.y.z --------------- - - -:Release Date: yyyy-mm-dd - - - -**New Features** - -One or two sentences explaining the purpose of this Release. - -**Bug Fixes** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and a sentence explaining what this defect is addressing. -**Known Issues** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and two, three sentences. - One sentences explaining what is the issue. - - Another sentence explaining the impact of the issue. - - And an optional sentence providing a workaround. - -**Security Issues** - You may want to include a reference to CVE (Common Vulnerabilities and Exposures) `CVE <https://cve.mitre.org>`_ - - -**Upgrade Notes** - -**Deprecation Notes** - -**Other** - diff --git a/docs/sli/northbound/offeredapis.rst b/docs/sli/offeredapis.rst index 2eebdec9..7a75245b 100644 --- a/docs/sli/northbound/offeredapis.rst +++ b/docs/sli/offeredapis.rst @@ -10,4 +10,6 @@ Offered APIs apis/asdcApi.rst apis/dataChange.rst + apis/sliapi.rst + diff --git a/docs/sli/plugins/architecture.rst b/docs/sli/plugins/architecture.rst deleted file mode 100644 index 8daa0d3b..00000000 --- a/docs/sli/plugins/architecture.rst +++ /dev/null @@ -1,27 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Architecture -============ - -.. note:: - * This section is used to describe a software component from a high level - view of capability, common usage scenarios, and interactions with other - components required in the usage scenarios. - - * The architecture section is typically: provided in a platform-component - and sdk collections; and referenced from developer and user guides. - - * This note must be removed after content has been added. - - -Capabilities ------------- - - -Usage Scenarios ---------------- - - -Interactions ------------- diff --git a/docs/sli/plugins/build.rst b/docs/sli/plugins/build.rst deleted file mode 100644 index 0a4c308e..00000000 --- a/docs/sli/plugins/build.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Build -===== - - -Environment ------------ -Requires maven release 3.3 or greater - -Steps ------ -To compile this code: - -1. Make sure your local Maven settings file ($HOME/.m2/settings.xml) contains references to the ONAP repositories and OpenDaylight repositories. - -2. To compile, run "mvn clean install".
\ No newline at end of file diff --git a/docs/sli/plugins/docs/architecture.rst b/docs/sli/plugins/docs/architecture.rst deleted file mode 100644 index 8daa0d3b..00000000 --- a/docs/sli/plugins/docs/architecture.rst +++ /dev/null @@ -1,27 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Architecture -============ - -.. note:: - * This section is used to describe a software component from a high level - view of capability, common usage scenarios, and interactions with other - components required in the usage scenarios. - - * The architecture section is typically: provided in a platform-component - and sdk collections; and referenced from developer and user guides. - - * This note must be removed after content has been added. - - -Capabilities ------------- - - -Usage Scenarios ---------------- - - -Interactions ------------- diff --git a/docs/sli/plugins/docs/build.rst b/docs/sli/plugins/docs/build.rst deleted file mode 100644 index 0a4c308e..00000000 --- a/docs/sli/plugins/docs/build.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Build -===== - - -Environment ------------ -Requires maven release 3.3 or greater - -Steps ------ -To compile this code: - -1. Make sure your local Maven settings file ($HOME/.m2/settings.xml) contains references to the ONAP repositories and OpenDaylight repositories. - -2. To compile, run "mvn clean install".
\ No newline at end of file diff --git a/docs/sli/plugins/docs/index.rst b/docs/sli/plugins/docs/index.rst deleted file mode 100644 index 83bb78a8..00000000 --- a/docs/sli/plugins/docs/index.rst +++ /dev/null @@ -1,12 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -CCSDK Service Logic Interpretor Plugins ----------------------------------------- -.. toctree:: - :maxdepth: 1 - - architecture.rst - offeredapis.rst - logging.rst - build.rst - release-notes.rst diff --git a/docs/sli/plugins/docs/logging.rst b/docs/sli/plugins/docs/logging.rst deleted file mode 100644 index 187eb03b..00000000 --- a/docs/sli/plugins/docs/logging.rst +++ /dev/null @@ -1,14 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Logging -======= -CCSDK uses slf4j to log messages to the standard OpenDaylight karaf.log -log file. - -Where to Access Information ---------------------------- -Logs are found within the SDNC docker container, in the directory -/opt/opendaylight/current/data/logs. - - diff --git a/docs/sli/plugins/docs/offeredapis.rst b/docs/sli/plugins/docs/offeredapis.rst deleted file mode 100644 index e20c786c..00000000 --- a/docs/sli/plugins/docs/offeredapis.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Offered APIs -============ - diff --git a/docs/sli/plugins/docs/release-notes.rst b/docs/sli/plugins/docs/release-notes.rst deleted file mode 100644 index b4516570..00000000 --- a/docs/sli/plugins/docs/release-notes.rst +++ /dev/null @@ -1,46 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -Release Notes -============= - -.. note:: - * This Release Notes must be updated each time the team decides to Release new artifacts. - * The scope of this Release Notes is for this particular component. In other words, each ONAP component has its Release Notes. - * This Release Notes is cumulative, the most recently Released artifact is made visible in the top of this Release Notes. - * Except the date and the version number, all the other sections are optional but there must be at least one section describing the purpose of this new release. - * This note must be removed after content has been added. - - -Version: x.y.z --------------- - - -:Release Date: yyyy-mm-dd - - - -**New Features** - -One or two sentences explaining the purpose of this Release. - -**Bug Fixes** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and a sentence explaining what this defect is addressing. -**Known Issues** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and two, three sentences. - One sentences explaining what is the issue. - - Another sentence explaining the impact of the issue. - - And an optional sentence providing a workaround. - -**Security Issues** - You may want to include a reference to CVE (Common Vulnerabilities and Exposures) `CVE <https://cve.mitre.org>`_ - - -**Upgrade Notes** - -**Deprecation Notes** - -**Other** - -===========
\ No newline at end of file diff --git a/docs/sli/plugins/index.rst b/docs/sli/plugins/index.rst deleted file mode 100644 index 83bb78a8..00000000 --- a/docs/sli/plugins/index.rst +++ /dev/null @@ -1,12 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -CCSDK Service Logic Interpretor Plugins ----------------------------------------- -.. toctree:: - :maxdepth: 1 - - architecture.rst - offeredapis.rst - logging.rst - build.rst - release-notes.rst diff --git a/docs/sli/plugins/logging.rst b/docs/sli/plugins/logging.rst deleted file mode 100644 index 187eb03b..00000000 --- a/docs/sli/plugins/logging.rst +++ /dev/null @@ -1,14 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Logging -======= -CCSDK uses slf4j to log messages to the standard OpenDaylight karaf.log -log file. - -Where to Access Information ---------------------------- -Logs are found within the SDNC docker container, in the directory -/opt/opendaylight/current/data/logs. - - diff --git a/docs/sli/plugins/offeredapis.rst b/docs/sli/plugins/offeredapis.rst deleted file mode 100644 index e20c786c..00000000 --- a/docs/sli/plugins/offeredapis.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -Offered APIs -============ - diff --git a/docs/sli/plugins/release-notes.rst b/docs/sli/plugins/release-notes.rst deleted file mode 100644 index b4516570..00000000 --- a/docs/sli/plugins/release-notes.rst +++ /dev/null @@ -1,46 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -Release Notes -============= - -.. note:: - * This Release Notes must be updated each time the team decides to Release new artifacts. - * The scope of this Release Notes is for this particular component. In other words, each ONAP component has its Release Notes. - * This Release Notes is cumulative, the most recently Released artifact is made visible in the top of this Release Notes. - * Except the date and the version number, all the other sections are optional but there must be at least one section describing the purpose of this new release. - * This note must be removed after content has been added. - - -Version: x.y.z --------------- - - -:Release Date: yyyy-mm-dd - - - -**New Features** - -One or two sentences explaining the purpose of this Release. - -**Bug Fixes** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and a sentence explaining what this defect is addressing. -**Known Issues** - - `CIMAN-65 <https://jira.onap.org/browse/CIMAN-65>`_ and two, three sentences. - One sentences explaining what is the issue. - - Another sentence explaining the impact of the issue. - - And an optional sentence providing a workaround. - -**Security Issues** - You may want to include a reference to CVE (Common Vulnerabilities and Exposures) `CVE <https://cve.mitre.org>`_ - - -**Upgrade Notes** - -**Deprecation Notes** - -**Other** - -===========
\ No newline at end of file |