diff options
Diffstat (limited to 'ecd-app-overlay/src/main/webapp/app/ecdapp/cloudify/blueprint-controllers.js')
| -rw-r--r-- | ecd-app-overlay/src/main/webapp/app/ecdapp/cloudify/blueprint-controllers.js | 467 |
1 files changed, 467 insertions, 0 deletions
diff --git a/ecd-app-overlay/src/main/webapp/app/ecdapp/cloudify/blueprint-controllers.js b/ecd-app-overlay/src/main/webapp/app/ecdapp/cloudify/blueprint-controllers.js new file mode 100644 index 0000000..2845782 --- /dev/null +++ b/ecd-app-overlay/src/main/webapp/app/ecdapp/cloudify/blueprint-controllers.js @@ -0,0 +1,467 @@ +/******************************************************************************* + * =============LICENSE_START========================================================= + * + * ================================================================================= + * Copyright (c) 2017 AT&T Intellectual Property. All rights reserved. + * ================================================================================ + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * ============LICENSE_END========================================================= + * + * ECOMP is a trademark and service mark of AT&T Intellectual Property. + *******************************************************************************/ +appDS2.controller('blueprintTableController', function( + $rootScope, $scope, $log, $modal, modalService, BlueprintService) { + + 'use strict'; + + // Controls logging in this controller + var debug = false; + + // this object holds all app data and functions + $scope.ecdapp = {}; + // models for controls on screen + $scope.ecdapp.tableData = []; + $scope.ecdapp.currentPageNum = 1; + $scope.ecdapp.viewPerPage = 10; + // other + $scope.ecdapp.errMsg = null; + $scope.ecdapp.isDataLoading = true; + $scope.ecdapp.isRequestFailed = false; + + /** + * Loads the table. Interprets the remote controller's response and copies + * to scope variables. The response is either list to be assigned to + * tableData, or an error to be shown. + */ + $scope.ecdapp.loadTable = function() { + $scope.ecdapp.isDataLoading = true; + BlueprintService.getBlueprints($scope.ecdapp.currentPageNum, $scope.ecdapp.viewPerPage) + .then(function(jsonObj) { + if (jsonObj.error) { + $log.error("blueprintController.loadTable failed: " + jsonObj.error); + $scope.ecdapp.isRequestFailed = true; + $scope.ecdapp.errMsg = jsonObj.error; + $scope.ecdapp.tableData = []; + } else { + if (debug) + $log.debug("bluePrintController.loadTable succeeded, size " + jsonObj.data.length); + $scope.ecdapp.isRequestFailed = false; + $scope.ecdapp.errMsg = null; + $scope.ecdapp.totalPages = jsonObj.totalPages; + $scope.ecdapp.tableData = jsonObj.items; + } + $scope.ecdapp.isDataLoading = false; + }, function(error) { + $log.error("blueprintController.loadTable failed: " + error); + $scope.ecdapp.isRequestFailed = true; + $scope.ecdapp.errMsg = error; + $scope.ecdapp.tableData = []; + $scope.ecdapp.isDataLoading = false; + }); + }; + + /** + * Invoked at first page load AND when + * user clicks on the B2B pagination control. + */ + $scope.pageChangeHandler = function(page) { + // console.log('pageChangeHandler: current is ' + $scope.ecdapp.currentPageNum + ' new is ' + page); + $scope.ecdapp.currentPageNum = page; + $scope.ecdapp.loadTable(); + } + + /** + * Shows a modal pop-up with blueprint content. + * Passes data in via an object named "message". + */ + $scope.ecdapp.viewBlueprintModalPopup = function(blueprint) { + $scope.ecdapp.editBlueprint = null; + var modalInstance = $modal.open({ + templateUrl : 'blueprint_view_popup.html', + controller : 'blueprintViewCtrl', + windowClass: 'modal-docked', + sizeClass: 'modal-medium', + resolve : { + message : function() { + var dataForPopup = { + blueprint : blueprint + }; + return dataForPopup; + } + } + }); + modalInstance.result.then(function(response) { + // No response. + }); + }; + + /** + * Shows a modal pop-up to upload a blueprint. + * Passes data in via an object named "message". + * On success, updates the table. + */ + $scope.ecdapp.uploadBlueprintModalPopup = function() { + $scope.ecdapp.editBlueprint = null; + var modalInstance = $modal.open({ + templateUrl : 'blueprint_upload_popup.html', + controller : 'blueprintUploadCtrl', + windowClass: 'modal-docked', + sizeClass: 'modal-small', + resolve : { + message : function() { + var dataForPopup = { + blueprint : $scope.ecdapp.editBlueprint, + blueprintList : $scope.ecdapp.tableData, + }; + return dataForPopup; + } + } + }); + modalInstance.result.then(function(response) { + if (debug) + $log.debug('uploadBlueprintModalPopup: response: ' + JSON.stringify(response)); + if (response == null) { + // $log.debug('user closed dialog'); + } + else { + if (response.error != null) { + $log.error('uploadBlueprintModalPopup failed: ' + response.error); + alert('Failed to upload blueprint:\n' + response.error); + } + else { + // success, get the updated list. + $scope.ecdapp.loadTable() + } + } + }); + }; + + /** + * Shows a modal pop-up to create a deployment from a blueprint. + * Passes data in via an object named "message". + */ + $scope.ecdapp.deployBlueprintModalPopup = function(blueprint) { + var modalInstance = $modal.open({ + templateUrl : 'blueprint_deploy_popup.html', + controller : 'blueprintDeployCtrl', + windowClass: 'modal-docked', + sizeClass: 'modal-medium', + resolve : { + message : function() { + var dataForPopup = { + blueprint : blueprint, + }; + return dataForPopup; + } + } + }); + modalInstance.result.then(function(response) { + if (debug) + $log.debug('deployBlueprintModalPopup: response: ' + JSON.stringify(response)); + if (response == null) { + if (debug) + $log.debug('user closed dialog'); + } + else { + if (response.error != null) { + $log.error('deployBlueprintModalPopup failed: ' + response.error); + alert('Failed to deploy blueprint:\n' + response.error); + // No need to update THIS table. + // Must switch to deployments page to see result? Awkward. + } + } + }); + }; + + /** + * Shows a modal pop-up to confirm deletion. + * On successful completion, updates the table. + */ + $scope.ecdapp.deleteBlueprintModalPopup = function(blueprint) { + modalService.popupConfirmWin("Confirm", "Delete blueprint with ID '" + + blueprint.id + "'?", function() { + BlueprintService.deleteBlueprint(blueprint.id).then( + function(response) { + if (debug) + $log.debug('deleteBlueprintModalPopup: response: ' + JSON.stringify(response)); + if (response && response.error) { + // $log.error('deleteBlueprint failed: ' + response.error); + alert('Failed to delete blueprint:\n' + response.error); + } + else { + // No response body on success. + $scope.ecdapp.loadTable(); + } + }, + function(error) { + $log.error('BlueprintService.deleteBlueprint failed: ' + error); + alert('Service failed to delete blueprint:\n' + error); + }); + }) + }; + + // Populate the table on load. Note that the b2b selector code + // sets the page-number value, and the change event calls load table. + // Do not call this here to avoid double load: + // $scope.ecdapp.loadTable(); + +}); + +/*************************************************************************/ + +appDS2.controller('blueprintUploadCtrl', function( + $scope, $log, $modalInstance, message, BlueprintService) { + + 'use strict'; + + // this object holds all app data and functions + $scope.ecdapp = {}; + + $scope.ecdapp.label = 'Upload Blueprint'; + $scope.ecdapp.uploadRequest = + { + blueprint_id : '', + blueprint_filename : '', + zip_url : '' + }; + + /** + * Validates content of user-editable fields. + * Uses the list in message.feedList + * Returns null if all is well, + * a descriptive error message otherwise. + */ + $scope.ecdapp.validateRequest = function(uploadRequest) { + if (uploadRequest == null) + return "No data found.\nPlease enter some values."; + if (uploadRequest.blueprint_id == null || uploadRequest.blueprint_id.trim() == '') + return "ID is required.\nPlease enter a value."; + if (uploadRequest.blueprint_filename == null || uploadRequest.blueprint_filename.trim() == '') + return "File name is required.\nPlease enter a value."; + if (uploadRequest.blueprint_filename.toLowerCase().substr(-4) != 'yaml') + return "File name must end with YAML.\nPlease use that suffix."; + if (uploadRequest.zip_url == null || uploadRequest.zip_url.trim() == '') + return "Zip file URL is required.\nPlease enter a value."; + return null; + } + + $scope.ecdapp.uploadBlueprint = function(uploadRequest) { + var validateMsg = $scope.ecdapp.validateRequest(uploadRequest); + if (validateMsg != null) { + alert('Invalid upload request:\n' + validateMsg); + return; + } + BlueprintService.uploadBlueprint(uploadRequest) + .then(function(response) { + // $log.debug('blueprintPopupCtrl: response: ' + response); + if (response.error) + alert('Failed to upload blueprint:\n' + response.error); + else + $modalInstance.close(response); + }, + function (error) { + $log.error('blueprintUploadCtrl: error while uploading: ' + error); + alert('Server rejected upload request:\n' + error); + } + ); + + }; + +}); + +/*************************************************************************/ + +appDS2.controller('blueprintViewCtrl', function( + $scope, $log, message, BlueprintService) { + + 'use strict'; + + var debug = false; + + if (debug) + $log.debug("blueprintViewCtrl.message: " + JSON.stringify(message)); + + // this object holds all app data and functions + $scope.ecdapp = {}; + $scope.ecdapp.blueprintId = message.blueprint.id; + + $scope.ecdapp.label = 'View Blueprint ' + message.blueprint.id; + + // Fetch the blueprint + $scope.ecdapp.isDataLoading = true; + BlueprintService.viewBlueprint(message.blueprint.id).then(function(jsonObj) { + if (debug) + $log.debug("blueprintViewCtrl.viewBlueprint response: " + JSON.stringify(jsonObj)); + if (jsonObj.error) { + $scope.ecdapp.errMsg = 'Request Failed'; + } + else { + $scope.ecdapp.blueprint = jsonObj.content; + } + $scope.ecdapp.isDataLoading = false; + }, function(error) { + $scope.ecdapp.isDataLoading = false; + alert('Failed to get blueprint. Please retry.'); + $log.error("blueprintViewCtrl failed: " + error); + }); + +}); + + +/*************************************************************************/ + +appDS2.controller('blueprintDeployCtrl', function( + $scope, $log, $modalInstance, message, DeploymentService) { + + 'use strict'; + + // Controls logging in this controller + var debug = false; + + // this object holds all app data and functions + $scope.ecdapp = {}; + $scope.ecdapp.label = 'Deploy Blueprint'; + + // Cache the input parameter names for validation + if (debug) + $log.debug('blueprintDeployCtrl: inputs: ' + JSON.stringify(message.blueprint.plan.inputs)); + $scope.ecdapp.inputsDict = message.blueprint.plan.inputs; + + // Copy the input parameter names and default values + let inputsAndDefaults = {}; + for (var pkey in message.blueprint.plan.inputs) { + if (debug) + $log.debug('blueprintDeployCtrl: checking key ' + pkey); + let dval = message.blueprint.plan.inputs[pkey].default; + if (! dval) + dval = ''; + inputsAndDefaults[pkey] = dval; + } + if (debug) + $log.debug('blueprintDeployCtrl: inputsAndDefaults: ' + JSON.stringify(inputsAndDefaults)); + + // Create an object for edit + $scope.ecdapp.editRequest = { + deployment_id : '', + blueprint_id : message.blueprint.id, + fileModel : null, + parmFileDict : inputsAndDefaults + }; + + /** + * Handler for file-read event reads file, parses YAML, validates content. + */ + var fileReader = new FileReader(); + fileReader.onload = function(event) { + let yamlString = fileReader.result; + if (debug) + $log.debug('fileReader.onload: read: ' + yamlString); + let ydict = {}; + try { + ydict = YAML.parse(yamlString); + } + catch (ex) { + alert('Failed to parse file as YAML:\n' + ex); + } + // Process the file + for (var ykey in ydict) { + let yval = ydict[ykey]; + if (debug) + $log.debug('fileReader.onload: typeof ' + ykey + ' is ' + typeof ykey); + // Allow only expected keys with scalar values + if (! (ykey in $scope.ecdapp.editRequest.parmFileDict)) + alert('Unexpected file content:\nKey not defined by blueprint:\n' + ykey); + else if (typeof yval !== 'string' && typeof yval !== 'number') + alert('Unexpected file content:\nNot a simple key-value pair:\n' + ykey); + else + $scope.ecdapp.editRequest.parmFileDict[ykey] = yval; + } + if (debug) + $log.debug('fileReader.onload: parmFileDict: ' + JSON.stringify($scope.ecdapp.editRequest.parmFileDict)); + + // Update table in all cases + $scope.$apply(); + } + + // Handler for file-select event + $scope.handleFileSelect = function() { + if (debug) + $log.debug('handleFileSelect: $scope.ecdapp.fileModel.name is ' + $scope.ecdapp.editRequest.fileModel.name); + fileReader.readAsText($scope.ecdapp.editRequest.fileModel); + }; + + /** + * Validates content of user-editable fields. + * Returns null if all is well, + * a descriptive error message otherwise. + */ + $scope.ecdapp.validateRequest = function(editRequest) { + if (editRequest == null) + return 'No data found.\nPlease enter some values.'; + if (editRequest.deployment_id == null || editRequest.deployment_id.trim() == '') + return 'Deployment ID is required.\nPlease enter a value.'; + if (editRequest.blueprint_id == null || editRequest.blueprint_id.trim() == '') + return 'Blueprint ID is required.\nPlease enter a value.'; + // Check that every file parameter is defined by blueprint + for (var pkey in $scope.ecdapp.editRequest.parmFileDict) { + // Defined in blueprint? + if (! $scope.ecdapp.inputsDict[pkey]) + return 'Unexpected input parameter\n' + pkey; + // Populated? + let parmVal = $scope.ecdapp.editRequest.parmFileDict[pkey]; + if (parmVal == null || (typeof (parmVal) === 'string' && parmVal.trim().length == 0)) + return 'Missing value for parameter\n' + pkey; + } + // Check that a value is supplied for every expected input + for (var bkey in $scope.ecdapp.inputsDict) { + if (! $scope.ecdapp.editRequest.parmFileDict[bkey]) + return 'Missing input parameter\n' + bkey; + } + return null; + } + + $scope.ecdapp.deployBlueprint = function(editRequest) { + if (debug) + $log.debug('deployBlueprint: editRequest is ' + JSON.stringify($scope.ecdapp.editRequest)); + var validateMsg = $scope.ecdapp.validateRequest(editRequest); + if (validateMsg != null) { + alert('Invalid Request:\n' + validateMsg); + return; + } + // Create request with key:value parameters dictionary + let deployRequest = { + deployment_id : editRequest.deployment_id, + blueprint_id : editRequest.blueprint_id, + parameters : {} + }; + for (var pkey in $scope.ecdapp.editRequest.parmFileDict) + deployRequest.parameters[pkey] = $scope.ecdapp.editRequest.parmFileDict[pkey]; + if (debug) + $log.debug('deployBlueprint: deployRequest is ' + JSON.stringify(deployRequest)); + + DeploymentService.deployBlueprint(deployRequest) + .then(function(response) { + if (response.error) + alert('Failed to deploy blueprint:\n' + response.error); + else + $modalInstance.close(response); + }, + function (error) { + $log.error('blueprintDeployCtrl: error while deploying: ' + error); + alert('Server rejected deployment request:\n' + error); + } + ); + + }; + +}); |