diff options
Diffstat (limited to 'docs/userguide')
17 files changed, 0 insertions, 673 deletions
diff --git a/docs/userguide/designtime.rst b/docs/userguide/designtime.rst deleted file mode 100644 index 805cfa89c..000000000 --- a/docs/userguide/designtime.rst +++ /dev/null @@ -1,50 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. Copyright (C) 2019 IBM. - -Design Time Tools Guide -======================= - -Below are the requirements to enable automation for a service within ONAP. - -For instantiation, the goal is to be able to automatically resolve all the HEAT/Helm variables, called cloud parameters. - -For post-instantiation, the goal is to configure the VNF with initial configuration. - -Prerequisite ------------- - -* Gather the cloud parameters: - -Instantiation: -~~~~~~~~~~~~~~ - -Have the HEAT template along with the HEAT environment file (or) Have the Helm chart along with the Values.yaml file - -(CDS supports, but whether SO → Multicloud support for Helm/K8S is different story) - - -Post-instantiation: -~~~~~~~~~~~~~~~~~~~ - -Have the configuration template to apply on the VNF. - -* XML for NETCONF -* JSON / XML for RESTCONF -* not supported yet - CLI -* JSON for Ansible [not supported yet] -* Identify which template parameters are static and dynamic -* Create and fill-in the a table for all the dynamic values - -While doing so, identify the resources using the same process to be resolved; for instance, if two IPs has to be resolved through the same IPAM, the process the resolve the IP is the same. - - -Services: ---------- - -.. toctree:: - :maxdepth: 2 - - ../cba/index - ../resourcedefinition/index - resourceassignment diff --git a/docs/userguide/developer-guide.rst b/docs/userguide/developer-guide.rst deleted file mode 100644 index be73f59c7..000000000 --- a/docs/userguide/developer-guide.rst +++ /dev/null @@ -1,34 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 -.. International License. http://creativecommons.org/licenses/by/4.0 -.. Copyright (C) 2020 Deutsche Telekom AG. - -Developer Guide -================= - -Blueprints Processor Microservice: ----------------------------------- - -Micro service to Manage Controller Blueprint Models, such as Resource Dictionary, Service Models, Velocity Templates etc, which will serve service for Controller Design Studio and Controller runtimes. - -This microservice is used to deploy Controller Blueprint Archive file in Run time database. This also helps to test the Valid CBA. - -.. toctree:: - :maxdepth: 1 - - running-bp-processor-in-ide - -Architecture: -~~~~~~~~~~~~~ - -|image0| - -.. |image0| image:: media/blueprintprocessor.jpg - :width: 400pt - - -Testing in local environment: ------------------------------ - -Point your browser to http://localhost:8000/api/v1/execution-service/ping (please note that the port is 8000, not 8080) - -To authenticate, use ccsdkapps/ccsdkapps login user id and password.
\ No newline at end of file diff --git a/docs/userguide/installation.rst b/docs/userguide/installation.rst deleted file mode 100644 index 10997294c..000000000 --- a/docs/userguide/installation.rst +++ /dev/null @@ -1,91 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. Copyright (C) 2019 IBM. - - -Installation Guide -================== - -Installation ------------- - -ONAP is meant to be deployed within a Kubernetes environment. Hence, the de-facto way to deploy CDS is through Kubernetes. - -ONAP also package Kubernetes manifest as Chart, using Helm. - -Prerequisite ------------- - -https://docs.onap.org/en/latest/guides/onap-developer/settingup/index.html - -Setup local Helm ----------------- - -helm repo - -* helm serve & -* helm repo add local http://127.0.0.1:8879 - -Get the chart -------------- - -Make sure to checkout the release to use, by replacing $release-tag in bellow command - -git clone https://gerrit.onap.org/r/oom -git checkout tags/$release-tag -cd oom/kubernetes -make cds - -Install CDS ------------ - -helm install --name cds cds - -Result ------- - -.. code-block:: bash - :linenos: - - $ kubectl get all --selector=release=cds - NAME READY STATUS RESTARTS AGE - pod/cds-blueprints-processor-54f758d69f-p98c2 0/1 Running 1 2m - pod/cds-cds-6bd674dc77-4gtdf 1/1 Running 0 2m - pod/cds-cds-db-0 1/1 Running 0 2m - pod/cds-controller-blueprints-545bbf98cf-zwjfc 1/1 Running 0 2m - - NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE - service/blueprints-processor ClusterIP 10.43.139.9 <none> 8080/TCP,9111/TCP 2m - service/cds NodePort 10.43.254.69 <none> 3000:30397/TCP 2m - service/cds-db ClusterIP None <none> 3306/TCP 2m - service/controller-blueprints ClusterIP 10.43.207.152 <none> 8080/TCP 2m - - NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE - deployment.apps/cds-blueprints-processor 1 1 1 0 2m - deployment.apps/cds-cds 1 1 1 1 2m - deployment.apps/cds-controller-blueprints 1 1 1 1 2m - - NAME DESIRED CURRENT READY AGE - replicaset.apps/cds-blueprints-processor-54f758d69f 1 1 0 2m - replicaset.apps/cds-cds-6bd674dc77 1 1 1 2m - replicaset.apps/cds-controller-blueprints-545bbf98cf 1 1 1 2m - - NAME DESIRED CURRENT AGE - statefulset.apps/cds-cds-db 1 1 2m - - - -Running CDS UI: ---------------- - -Client: -~~~~~~~ -Install Node.js and angularCLI. Refer https://angular.io/guide/quickstart -npm install in the directory cds/cds-ui/client -npm run build - to build UI module - -Loopback Server: -~~~~~~~~~~~~~~~~ - -npm install in the directory cds/cds-ui/server -npm start should bring you the CDS UI page in your local machine with the link https://127.0.0.1:3000/ diff --git a/docs/userguide/media/blueprintprocessor.jpg b/docs/userguide/media/blueprintprocessor.jpg Binary files differdeleted file mode 100644 index 429876a13..000000000 --- a/docs/userguide/media/blueprintprocessor.jpg +++ /dev/null diff --git a/docs/userguide/media/build_logs.png b/docs/userguide/media/build_logs.png Binary files differdeleted file mode 100644 index 558fd60a8..000000000 --- a/docs/userguide/media/build_logs.png +++ /dev/null diff --git a/docs/userguide/media/create_run_config_java.png b/docs/userguide/media/create_run_config_java.png Binary files differdeleted file mode 100644 index 5d006e2ac..000000000 --- a/docs/userguide/media/create_run_config_java.png +++ /dev/null diff --git a/docs/userguide/media/create_run_config_kt.png b/docs/userguide/media/create_run_config_kt.png Binary files differdeleted file mode 100644 index 566ff609c..000000000 --- a/docs/userguide/media/create_run_config_kt.png +++ /dev/null diff --git a/docs/userguide/media/expand_vm_options.PNG b/docs/userguide/media/expand_vm_options.PNG Binary files differdeleted file mode 100644 index 9cb98d3f9..000000000 --- a/docs/userguide/media/expand_vm_options.PNG +++ /dev/null diff --git a/docs/userguide/media/import_project.png b/docs/userguide/media/import_project.png Binary files differdeleted file mode 100644 index ce7eb3ac5..000000000 --- a/docs/userguide/media/import_project.png +++ /dev/null diff --git a/docs/userguide/media/reimport_maven.png b/docs/userguide/media/reimport_maven.png Binary files differdeleted file mode 100644 index bc49b3dc8..000000000 --- a/docs/userguide/media/reimport_maven.png +++ /dev/null diff --git a/docs/userguide/media/run-config-set-up.png b/docs/userguide/media/run-config-set-up.png Binary files differdeleted file mode 100644 index 3c2e5fb4f..000000000 --- a/docs/userguide/media/run-config-set-up.png +++ /dev/null diff --git a/docs/userguide/media/run_config_java.png b/docs/userguide/media/run_config_java.png Binary files differdeleted file mode 100644 index 4da5d7f34..000000000 --- a/docs/userguide/media/run_config_java.png +++ /dev/null diff --git a/docs/userguide/media/run_config_kt.png b/docs/userguide/media/run_config_kt.png Binary files differdeleted file mode 100644 index 4e88d2d0a..000000000 --- a/docs/userguide/media/run_config_kt.png +++ /dev/null diff --git a/docs/userguide/media/run_debug.png b/docs/userguide/media/run_debug.png Binary files differdeleted file mode 100644 index 3aa90577f..000000000 --- a/docs/userguide/media/run_debug.png +++ /dev/null diff --git a/docs/userguide/media/vsc_logs.png b/docs/userguide/media/vsc_logs.png Binary files differdeleted file mode 100644 index 886d1b3c5..000000000 --- a/docs/userguide/media/vsc_logs.png +++ /dev/null diff --git a/docs/userguide/resourceassignment.rst b/docs/userguide/resourceassignment.rst deleted file mode 100644 index aa4f6b559..000000000 --- a/docs/userguide/resourceassignment.rst +++ /dev/null @@ -1,74 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. Copyright (C) 2019 IBM. - -Resource Assignment -=================== -.. toctree:: - :maxdepth: 1 - - -Component executor: -------------------- -Workflow: -~~~~~~~~~ - -A workflow defines an overall action to be taken for the service; it can be composed of a set of sub-actions to execute. Currently, workflows are backed by Directed Graph engine. - -A CBA can have as many workflow as needed. - -Template: -~~~~~~~~~ - -A template is an artifact. - -A template is parameterized and each parameter must be defined in a corresponding mapping file. - -In order to know which mapping correlate to which template, the file name must start with an artifact-prefix, serving as identifier to the overall template + mapping. - -The requirement is as follow: - -${artifact-prefix}-template -${artifact-prefix}-mapping - -A template can represent anything, such as device config, payload to interact with 3rd party systems, resource-accumulator template, etc... - -Mapping: -~~~~~~~~ -Defines the contract of each resource to be resolved. Each placeholder in the template must have a corresponding mapping definition. - -A mapping is comprised of: - -- name -- required / optional -- type (support complex type) -- dictionary-name -- dictionary-source - -Dependencies: -~~~~~~~~~~~~~ - -This allows to make sure given resources get resolved prior the resolution of the resources defining the dependency. -The dictionary fields reference to a specific data dictionary. - - -Resource accumulator: ---------------------- - -In order to resolve HEAT environment variables, resource accumulator templates are being in used for Dublin. - -These templates are specific to the pre-instantiation scenario, and relies on GR-API within SDNC. - -It is composed of the following sections: - -resource-accumulator-resolved-data: defines all the resources that can be resolved directly from the context. It expresses a direct mapping between the name of the resource and its value. - -capability-data: defines what capability to use to create a specific resource, along with the ingredients required to invoke the capability and the output mapping. - -- Scripts -- Library -- NetconfClient - -In order to facilitate NETCONF interaction within scripts, a python NetconfClient binded to our Kotlin implementation is made available. This NetconfClient can be used when using the netconf-component-executor. - -The client can be find here: https://github.com/onap/ccsdk-apps/blob/master/components/scripts/python/ccsdk_netconf/netconfclient.py
\ No newline at end of file diff --git a/docs/userguide/running-bp-processor-in-ide.rst b/docs/userguide/running-bp-processor-in-ide.rst deleted file mode 100644 index 3cbcc18b1..000000000 --- a/docs/userguide/running-bp-processor-in-ide.rst +++ /dev/null @@ -1,424 +0,0 @@ -.. This work is a derivative of https://wiki.onap.org/display/DW/Running+Blueprints+Processor+Microservice+in+an+IDE -.. This work is licensed under a Creative Commons Attribution 4.0 -.. International License. http://creativecommons.org/licenses/by/4.0 -.. Copyright (C) 2020 Deutsche Telekom AG. - -Running Blueprints Processor Microservice in an IDE -==================================================== - -Objective -~~~~~~~~~~~~ - -Run the blueprint processor locally in an IDE, while having the database running in a container. -This way, code changes can be conveniently tested and debugged. - -Check out the code -~~~~~~~~~~~~~~~~~~~ - -Check out the code from Gerrit: https://gerrit.onap.org/r/#/admin/projects/ccsdk/cds - -Build it locally -~~~~~~~~~~~~~~~~~~ - -In the checked out directory, type - -.. code-block:: bash - - mvn clean install -Pq -Dadditionalparam=-Xdoclint:none - -Wait for the maven install command to finish until you go further. - -Spin up a Docker container with the database -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The Blueprints Processor project uses a database to store information about the blueprints -and therefore it needs to be online before attempting to run it. - -One way to create the database is by using the :file:`docker-compose.yaml` file. -This database will require a local directory to mount a volume, therefore before running docker-compose create following directory: - -.. code-block:: bash - - mkdir -p -m 755 /opt/app/cds/mysql/data - -Navigate to the docker-compose file in the distribution module: - -.. tabs:: - - .. group-tab:: Frankfurt - Latest - - .. code-block:: bash - - cd ms/blueprintsprocessor/application/src/main/dc - - .. group-tab:: El Alto - Dublin - - .. code-block:: bash - - ms/blueprintsprocessor/distribution/src/main/dc - -And run docker-composer: - -.. code-block:: bash - - docker-compose up -d db - -This should spin up a container of the MariaDB image in the background. -To check if it has worked, this command can be used: - -.. code-block:: bash - - docker-compose logs -f - -The phrase ``mysqld: ready for connections`` indicates that the database was started correctly. - -From now on, the Docker container will be available on the computer; if it ever gets stopped, -it can be started again by the command: - -.. code-block:: bash - - docker start <id of mariadb container> - -Set permissions on the local file system -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Blueprints processor uses the local file system for some operations and, therefore, -need some existing and accessible paths to run properly. - -Execute the following commands to create the needed directories, and grant access to the current user to modify them: - -.. code-block:: bash - - mkdir -p -m 755 /opt/app/onap/blueprints/archive - mkdir -p -m 755 /opt/app/onap/blueprints/deploy - mkdir -p -m 755 /opt/app/onap/scripts - sudo chown -R $(id -u):$(id -g) /opt/app/onap/ - -Import the project into the IDE -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -.. tabs:: - - .. tab:: IntelliJ IDEA - - .. note:: - This is the recommended IDE for running CDS blueprint processor. - - Go to *File | Open* and choose the :file:`pom.xml` file of the cds/ms/blueprintprocessor directory: - - |imageImportProject| - - Import as a project. Sometimes it may be necessary to reimport Maven project, e.g. if some dependencies can't be found: - - |imageReimportMaven| - - **Override some application properties:** - - Next steps will create a run configuration profile overriding some application properties with custom values, - to reflect the local environment characteristics. - - .. tabs:: - - .. group-tab:: Frankfurt - Latest - - Navigate to the main class of the Blueprints Processor, the BlueprintProcessorApplication class: - - ``ms/blueprintsprocessor/application/src/main/kotlin/org/onap/ccsdk/cds/blueprintsprocessor/BlueprintProcessorApplication.kt``. - - After dependencies are imported and indexes are set up you will see a green arrow - next to main function of BlueprintProcessorApplication class, indicating that the run configuration can now be - created. Right-click inside the class at any point to load the context menu and select create - a run configuration from context: - - |imageCreateRunConfigKt| - - **The following window will open:** - - |imageRunConfigKt| - - **Add the following in the field `VM Options`:** - - .. code-block:: bash - :caption: **Custom values for properties** - - -Dspring.profiles.active=dev - - Optional: You can override any value from **application-dev.properties** file here. In this case use the following pattern: - - .. code-block:: java - - -D<application-dev.properties key>=<application-dev.properties value> - - .. group-tab:: El Alto - - Navigate to the main class of the Blueprints Processor, the BlueprintProcessorApplication class: - - ``ms/blueprintsprocessor/application/src/main/java/org/onap/ccsdk/cds/blueprintsprocessor/BlueprintProcessorApplication.java.`` - - After dependencies are imported and indexes are set up you will see a green arrow - next to main function of BlueprintProcessorApplication class, indicating that the run configuration can now be - created. Right-click inside the class at any point to load the context menu and select create - a run configuration from context: - - |imageCreateRunConfigJava| - - **The following window will open:** - - |imageRunConfigJava| - - **Add the following in the field `VM Options`:** - - .. code-block:: bash - :caption: **Custom values for properties** - - -Dspring.profiles.active=dev - - Optional: You can override any value from **application-dev.properties** file here. In this case use the following pattern: - - .. code-block:: java - - -D<application-dev.properties key>=<application-dev.properties value> - - .. group-tab:: Dublin - - Navigate to the main class of the Blueprints Processor, the BlueprintProcessorApplication class: - - ``ms/blueprintsprocessor/application/src/main/java/org/onap/ccsdk/cds/blueprintsprocessor/BlueprintProcessorApplication.java``. - - After dependencies are imported and indexes are set up you will see a green arrow - next to main function of BlueprintProcessorApplication class, indicating that the run configuration can now be - created. Right-click inside the class at any point to load the context menu and select create - a run configuration from context: - - |imageCreateRunConfigJava| - - **The following window will open:** - - |imageRunConfigJava| - - **Add the following in the field `VM Options`** - - .. code-block:: java - :caption: **Custom values for properties** - - -DappName=ControllerBluePrints - -Dms_name=org.onap.ccsdk.apps.controllerblueprints - -DappVersion=1.0.0 - -Dspring.config.location=opt/app/onap/config/ - -Dspring.datasource.url=jdbc:mysql://127.0.0.1:3306/sdnctl - -Dspring.datasource.username=sdnctl - -Dspring.datasource.password=sdnctl - -Dcontrollerblueprints.loadInitialData=true - -Dblueprintsprocessor.restclient.sdncodl.url=http://localhost:8282/ - -Dblueprintsprocessor.db.primary.url=jdbc:mysql://localhost:3306/sdnctl - -Dblueprintsprocessor.db.primary.username=sdnctl - -Dblueprintsprocessor.db.primary.password=sdnctl - -Dblueprintsprocessor.db.primary.driverClassName=org.mariadb.jdbc.Driver - -Dblueprintsprocessor.db.primary.hibernateHbm2ddlAuto=update - -Dblueprintsprocessor.db.primary.hibernateDDLAuto=none - -Dblueprintsprocessor.db.primary.hibernateNamingStrategy=org.hibernate.cfg.ImprovedNamingStrategy - -Dblueprintsprocessor.db.primary.hibernateDialect=org.hibernate.dialect.MySQL5InnoDBDialect - -Dblueprints.processor.functions.python.executor.executionPath=./components/scripts/python/ccsdk_blueprints - -Dblueprints.processor.functions.python.executor.modulePaths=./components/scripts/python/ccsdk_blueprints,./components/scripts/python/ccsdk_netconf,./components/scripts/python/ccsdk_restconf - -Dblueprintsprocessor.restconfEnabled=true - -Dblueprintsprocessor.restclient.sdncodl.type=basic-auth - -Dblueprintsprocessor.restclient.sdncodl.url=http://localhost:8282/ - -Dblueprintsprocessor.restclient.sdncodl.username=admin - -Dblueprintsprocessor.restclient.sdncodl.password=Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U - -Dblueprintsprocessor.grpcEnable=false - -Dblueprintsprocessor.grpcPort=9111 - -Dblueprintsprocessor.blueprintDeployPath=/opt/app/onap/blueprints/deploy - -Dblueprintsprocessor.blueprintArchivePath=/opt/app/onap/blueprints/archive - -Dblueprintsprocessor.blueprintWorkingPath=/opt/app/onap/blueprints/work - -Dsecurity.user.password={bcrypt}$2a$10$duaUzVUVW0YPQCSIbGEkQOXwafZGwQ/b32/Ys4R1iwSSawFgz7QNu - -Dsecurity.user.name=ccsdkapps - -Dblueprintsprocessor.messageclient.self-service-api.kafkaEnable=false - -Dblueprintsprocessor.messageclient.self-service-api.topic=producer.t - -Dblueprintsprocessor.messageclient.self-service-api.type=kafka-basic-auth - -Dblueprintsprocessor.messageclient.self-service-api.bootstrapServers=127.0.0.1:9092 - -Dblueprintsprocessor.messageclient.self-service-api.consumerTopic=receiver.t - -Dblueprintsprocessor.messageclient.self-service-api.groupId=receiver-id - -Dblueprintsprocessor.messageclient.self-service-api.clientId=default-client-id - -Dspring.profiles.active=dev - -Dblueprintsprocessor.httpPort=8080 - -Dserver.port=55555 - - - **In the field 'Working Directory' browse to your application path** ``.../cds/ms/blueprintsprocessor/application`` - **if path is not already specified correctly.** - - Run configuration should now look something like this: - - |imageRunConfigSetUp| - - **Add/replace the following in Blueprint's application-dev.properties file.** - - .. code-block:: java - - blueprintsprocessor.grpcclient.remote-python.type=token-auth - blueprintsprocessor.grpcclient.remote-python.host=localhost - blueprintsprocessor.grpcclient.remote-python.port=50051 - blueprintsprocessor.grpcclient.remote-python.token=Basic Y2NzZGthcHBzOmNjc2RrYXBwcw== - - blueprintprocessor.remoteScriptCommand.enabled=true - - Take care that if a parameter already exist you need to change the value of the existing parameter to avoid duplicates. - - - **Run the application:** - - Before running Blueprint Processor check that you use the correct Java version in IntelliJ. - Select either run or debug for the created Run Configuration to start the Blueprints Processor: - - |imageRunDebug| - - |imageBuildLogs| - - .. tab:: Visual Studio Code - - .. tabs:: - - .. group-tab:: Frankfurt - Latest - - * **Step #1** - Make sure your installation of Visual Studio Code is up to date. This guide was writen using version 1.48 - * **Step #2** - Install `Kotlin extension from the Visual Studio Code Marketplace <https://marketplace.visualstudio.com/items?itemName=fwcd.kotlin>`_ - * **Step #3** - On the top menu click *Run | Open Configurations* - - .. warning:: This should open the file called `launch.json` but in some cases you'll need to wait for the Kotlin Language Server to be installed before you can do anything. - Please watch the bottom bar in Visual Studio Code for messages about things getting installed. - - * **Step #4** - add configuration shown below to your configurations list. - - .. code-block:: json - - { - "type": "kotlin", - "request": "launch", - "name": "Blueprint Processor", - "projectRoot": "${workspaceFolder}/ms/blueprintsprocessor/application", - "mainClass": "-Dspring.profiles.active=dev org.onap.ccsdk.cds.blueprintsprocessor.BlueprintProcessorApplicationKt" - } - - .. warning:: The `projectRoot` path assumes that you created your Workspace in the main CDS repository folder. If not - please change the path accordingly - - .. note:: The `mainClass` contains a spring profile param before the full class name. This is done because `args` is not supported by Kotlin launch.json configuration. - If you have a cleaner idea how to solve this - please let us know. - - **Add/replace the following in Blueprint's application-dev.properties file:** - - .. code-block:: java - - blueprintsprocessor.grpcclient.remote-python.type=token-auth - blueprintsprocessor.grpcclient.remote-python.host=localhost - blueprintsprocessor.grpcclient.remote-python.port=50051 - blueprintsprocessor.grpcclient.remote-python.token=Basic Y2NzZGthcHBzOmNjc2RrYXBwcw== - - blueprintprocessor.remoteScriptCommand.enabled=true - - **Currently the following entries need to be added in VSC too:** - - .. code-block:: java - - logging.level.web=DEBUG - logging.level.org.springframework.web: DEBUG - - #Encrypted username and password for health check service - endpoints.user.name=eHbVUbJAj4AG2522cSbrOQ== - endpoints.user.password=eHbVUbJAj4AG2522cSbrOQ== - - #BaseUrls for health check blueprint processor services - blueprintprocessor.healthcheck.baseUrl=http://localhost:8080/ - blueprintprocessor.healthcheck.mapping-service-name-with-service-link=[Execution service,/api/v1/execution-service/health-check],[Resources service,/api/v1/resources/health-check],[Template service,/api/v1/template/health-check] - - #BaseUrls for health check Cds Listener services - cdslistener.healthcheck.baseUrl=http://cds-sdc-listener:8080/ - cdslistener.healthcheck.mapping-service-name-with-service-link=[SDC Listener service,/api/v1/sdclistener/healthcheck] - - #Actuator properties - management.endpoints.web.exposure.include=* - management.endpoint.health.show-details=always - management.info.git.mode=full - - In VSC the properties are read from target folder, thats why the following maven command needs to be rerun: - - .. code-block:: bash - - mvn clean install -DskipTests=true -Dmaven.test.skip=true -Dmaven.javadoc.skip=true -Dadditionalparam=-Xdoclint:none - - Click Run in Menu bar. - - |imageLogsVSC| - - -Testing the application -~~~~~~~~~~~~~~~~~~~~~~~ - -There are two main features of the Blueprints Processor that can be of interest of a developer: -blueprint publish and blueprint process. - -To upload custom blueprints, the endpoint ``api/v1/execution-service/publish`` is used. - -To process, the endpoint is ``api/v1/execution-service/process``. - -Postman is a software that can be used to send these request, and an example of -them is present on https://www.getpostman.com/collections/b99863b0cde7565a32fc. - -A detailed description of the usage of different APIs of CDS will follow. - - -Possible Fixes -~~~~~~~~~~~~~~ - -Imported packages or annotiations are not found, Run Config not available? -***************************************************************************** - -1. Rebuild with ``maven install ...`` (see above) -2. Potentially change Maven home directory in Settings -3. Maven reimport in IDE - -Compilation error? -******************* -* Change Java Version to 11 - - -.. image alignment inside tabs doesn't work - -.. |imageRunConfigJava| image:: media/run_config_java.png - :width: 500pt - :align: middle - -.. |imageRunConfigKt| image:: media/run_config_kt.png - :width: 500pt - :align: middle - -.. |imageCreateRunConfigJava| image:: media/create_run_config_java.png - :width: 500pt - :align: middle - -.. |imageCreateRunConfigKt| image:: media/create_run_config_kt.png - :width: 500pt - :align: middle - -.. |imageImportProject| image:: media/import_project.png - :width: 300pt - :align: middle - -.. |imageReimportMaven| image:: media/reimport_maven.png - :width: 400pt - :align: middle - -.. |imageRunDebug| image:: media/run_debug.png - :width: 500pt - :align: middle - -.. |imageBuildLogs| image:: media/build_logs.png - :width: 500pt - :align: middle - -.. |imageLogsVSC| image:: media/vsc_logs.png - :width: 500pt - :align: middle - -.. |imageRunConfigSetUp| image:: media/run-config-set-up.png - :width: 500pt - :align: middle |
