aboutsummaryrefslogtreecommitdiffstats
path: root/docs/usecases/pnf-simulator.rst
diff options
context:
space:
mode:
authorJakobKrieg <jakob.krieg@bcmsolutions.de>2020-11-06 19:17:56 +0100
committerJakob Krieg <jakob.krieg@bcmsolutions.de>2020-11-06 18:57:07 +0000
commitfac42ccc0046183b5cab827caf05f0b540839965 (patch)
treef0b117238fc09b507772ee86cd873b01e4259b2b /docs/usecases/pnf-simulator.rst
parent600f1281c534f01037e8b9be32b46fd36c84085a (diff)
PNF Simulator guide remove scripts and CBAs from guide.
Remove all steps (dd, enrichment, publish) which are executed automatically by bootstrap now. Issue-ID: CCSDK-2848 Change-Id: I4de4b7f4dd4da78b7b04f2292d8e9ebffeb541bf Signed-off-by: JakobKrieg <jakob.krieg@bcmsolutions.de>
Diffstat (limited to 'docs/usecases/pnf-simulator.rst')
-rw-r--r--docs/usecases/pnf-simulator.rst774
1 files changed, 185 insertions, 589 deletions
diff --git a/docs/usecases/pnf-simulator.rst b/docs/usecases/pnf-simulator.rst
index 5e44967c4..4be95113a 100644
--- a/docs/usecases/pnf-simulator.rst
+++ b/docs/usecases/pnf-simulator.rst
@@ -9,13 +9,13 @@ PNF Simulator Day-N config-assign/deploy
Overview
~~~~~~~~~~
-This use case shows in a very simple way how a blueprint model of a PNF is created in CDS and how the day-n configuration is
-assigned and deployed through CDS. A Netconf server (docker image `sysrepo/sysrepo-netopeer2`) is used for simulating the PNF.
+This use case shows in a very simple how the day-n configuration is assigned and deployed to a PNF through CDS.
+A Netconf server (docker image `sysrepo/sysrepo-netopeer2`) is used for simulating the PNF.
This use case (POC) solely requires a running CDS and the PNF Simulator running on a VM (Ubuntu is used by the author).
No other module of ONAP is needed.
-There are different ways to run CDS, to run PNF simulator and to do configuration deployment. This guide will show
+There are different ways to run CDS and the PNF simulator. This guide will show
different possible options to allow the greatest possible flexibility.
Run CDS (Blueprint Processor)
@@ -336,591 +336,194 @@ here but they are not tested by the author of this guide.
Config-assign and config-deploy in CDS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-In the following steps the CBA is published in CDS, config-assignment is done and the config is deployed to to the
-Netconf server through CDS in the last step. We will use this CBA: :download:`zip <media/pnf-simulator-demo-cba-unenriched.zip>`.
-If you want to use scripts instead of Postman the CBA also contains all necessary scripts.
+In the following steps config-assignment is done and the config is deployed to the
+Netconf server through CDS. Example requests are in the following Postman collection
+:download:`JSON <media/pnf-simulator.postman_collection.json>`. You can also use bash scripting to call the APIs.
-.. tabs::
-
- .. tab:: Scripts
-
- **There will be different scripts depending on your CDS installation. For running it in an IDE always use scripts with**
- **-ide.sh prefix. For running CDS in Kubernetes use scripts with -k8s.sh ending. In scripts with -ide.sh prefix**
- **host will be localhost and port will be 8081. For K8s host ip adress gets automatically detected, port is 8000.**
-
- **Set up CDS:**
-
- Unzip the downloaded CBA and go to ``/Scripts/`` directory.
-
- The below script will call Bootstrap API of CDS which loads the CDS default model artifacts into CDS DB.
- You should get HTTP status 200 for the below command.
-
- .. code-block:: sh
-
- bash -x ./bootstrap-cds-ide.sh
- # bash -x ./bootstrap-cds-k8s.sh
-
- Call ``bash -x ./get-cds-blueprint-models-ide.sh`` / ``bash -x ./get-cds-blueprint-models-k8s.sh`` to get all blueprint models in the CDS database.
- You will see a default model ``"artifactName": "vFW-CDS"`` which was loaded by calling bootstrap.
-
- Push the PNF CDS blueprint model data dictionary to CDS by calling ``bash -x ./dd-microk8s-ide.sh ./dd.json`` /
- ``bash -x ./dd-microk8s-k8s.sh ./dd.json``.
- This will call the data dictionary endpoint of CDS.
-
- Check CDS database for PNF data dictionaries by entering the DB. You should see 6 rows as shown below.
-
- **For running CDS in an IDE (accessing mariadb container):**
-
- .. code-block:: sh
-
- sudo docker exec -it mariadb_container_id mysql -uroot -psdnctl
- > USE sdnctl;
- > select name, data_type from RESOURCE_DICTIONARY where updated_by='Aarna service <vmuthukrishnan@aarnanetworks.com>';
-
- +---------------------+-----------+
- | name | data_type |
- +---------------------+-----------+
- | netconf-password | string |
- | netconf-server-port | string |
- | netconf-username | string |
- | pnf-id | string |
- | pnf-ipv4-address | string |
- | stream-count | integer |
- +---------------------+-----------+
-
- quit
-
- Replace the container id with your running mariadb container id.
-
-
- **For running CDS in K8s (accessing MariaDB pod):**
-
- .. code-block:: sh
-
- ./connect-cds-mariadb-k8s.sh
-
- select name, data_type from RESOURCE_DICTIONARY where updated_by='Aarna service <vmuthukrishnan@aarnanetworks.com>';
-
- +---------------------+-----------+
- | name | data_type |
- +---------------------+-----------+
- | netconf-password | string |
- | netconf-server-port | string |
- | netconf-username | string |
- | pnf-id | string |
- | pnf-ipv4-address | string |
- | stream-count | integer |
- +---------------------+-----------+
-
- quit
-
- **Enrichment:**
-
- Move to the main folder of the CBA with ``cd ..`` and archive all folders with ``zip -r pnf-demo.zip *``.
-
- .. warning::
- Sometimes there might be issues during enrichment (e.g. some parameters get deleted in the CBA)). If you face problems
- during enrichment or deployment later on use the following CBA, which is already enriched:
- :download:`zip <media/pnf-simulator-demo-cba-enriched.zip>`. If you use the enriched CBA, skip
- this section until Deploy/Save Blueprint.
-
- Enrich the blueprint through calling the following script. Take care to provide the zip file you downloader earlier.
-
- .. code-block:: sh
-
- cd Scripts
- bash -x ./enrich-and-download-cds-blueprint-ide.sh ../pnf-demo.zip
- # bash -x ./enrich-and-download-cds-blueprint-k8s.sh ../pnf-demo.zip
-
- Go to the enriched CBA folder with ``cd /tmp/CBA/`` and unzip with ``unzip pnf-demo.zip``.
-
- **Deploy/Save the Blueprint into CDS database**
-
- Go to Scripts folder with ``cd Scripts``.
-
- Run the following script to save/deploy the Blueprint into the CDS database.
-
- .. code-block:: sh
-
- bash -x ./save-enriched-blueprint-ide.sh ../pnf-demo.zip
- # bash -x ./save-enriched-blueprint-k8s.sh ../pnf-demo.zip
-
- After that you should see the new model "artifactName": "pnf_netconf" by calling ``bash -x ./get-cds-blueprint-models.sh``
-
- **Config-Assign**
-
- The assumption is that we are using the same host to run PNF NETCONF simulator as well as CDS. You will need the
- IP Adress of the Netconf server container which can be found out with
- ``docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' netopeer2``. In the
- following examples we will use 172.17.0.2.
-
- Day-1 configuration:
-
- .. code-block:: sh
-
- bash -x ./create-config-assing-data-ide.sh day-1 172.17.0.2 5
- # bash -x ./create-config-assing-data-k8s.sh day-1 172.17.0.2 5
-
- You can verify the day-1 NETCONF RPC payload looking into CDS DB. You should see the NETCONF RPC with 5
- streams (fw_udp_1 TO fw_udp_5). Connect to the DB like mentioned above and run the below statement. You should
- see the day-1 configuration as an output.
-
- .. code-block:: sh
-
- MariaDB [sdnctl]> select * from TEMPLATE_RESOLUTION where resolution_key='day-1' AND artifact_name='netconfrpc';
-
- <rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
- <edit-config>
- <target>
- <running/>
- </target>
- <config>
- <sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
- <pg-streams>
- <pg-stream>
- <id>fw_udp_1</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_2</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_3</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_4</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_5</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- </pg-streams>
- </sample-plugin>
- </config>
- </edit-config>
- </rpc>
-
- Create PNF configuration for resolution-key = day-2 (stream-count = 10).
- You can verify the CURL command JSON pay load file /tmp/day-n-pnf-config.json
-
- .. code-block:: sh
-
- bash -x ./create-config-assing-data-ide.sh day-2 172.17.0.2 10
- # bash -x ./create-config-assing-data-k8s.sh day-2 172.17.0.2 10
-
- You can verify the day-2 NETCONF RPC payload looking into CDS DB. You should see the NETCONF RPC with 10
- streams (fw_udp_1 TO fw_udp_10). Connect to the DB like mentioned above and run the below statement. You should
- see the day-2 configuration as an output.
-
- .. code-block:: sh
-
- MariaDB [sdnctl]> select * from TEMPLATE_RESOLUTION where resolution_key='day-2' AND artifact_name='netconfrpc';
-
- <rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
- <edit-config>
- <target>
- <running/>
- </target>
- <config>
- <sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
- <pg-streams>
- <pg-stream>
- <id>fw_udp_1</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_2</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_3</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_4</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_5</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_6</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_7</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_8</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_9</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_10</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- </pg-streams>
- </sample-plugin>
- </config>
- </edit-config>
- </rpc>
-
- .. note::
- Until this step CDS did not interact with the PNF simulator or device. We just created the day-1 and day-2
- configurations and stored it in CDS database
-
- **Config-Deploy:**
-
- Now we will make the CDS REST API calls to push the day-1 and day-2 configuration changes to the PNF simulator.
-
- If you run CDS in Kubernetes open a new terminal and keep it running with ``bash -x ./tail-cds-bp-log.sh``,
- we can use this to review the config-deploy actions. If you run CDS in an IDE you can have a look into the IDE terminal.
-
- Following command will deploy day-1 configuration.
- Syntax is ``# bash -x ./process-config-deploy.sh RESOLUTION_KEY PNF_IP_ADDRESS``
-
- .. code-block:: sh
-
- bash -x ./process-config-deploy-ide.sh day-1 127.17.0.2
- # bash -x ./process-config-deploy-k8s.sh day-1 127.17.0.2
-
- Go back to PNF netopeer cli console like mentioned above and verify if you can see 5 streams fw_udp_1 to fw_udp_5 enabled. If the 5 streams
- appear in the output as follows, the day-1 configuration got successfully deployed and the use case is successfully done.
-
- .. code-block:: sh
-
- > get --filter-xpath /sample-plugin:*
- DATA
- <sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
- <pg-streams>
- <pg-stream>
- <id>1</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_1</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_2</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_3</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_4</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_5</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- </pg-streams>
- </sample-plugin>
- >
-
- The same can be done for day-2 config (follow same steps just with day-2 configuration).
-
- .. note::
- Through deployment we did not deploy the PNF, we just modified the PNF. The PNF could also be installed by CDS
- but this is not targeted in this guide.
-
- .. tab:: Postman
-
- Download the Postman collection :download:`json <media/pnf-simulator.postman_collection.json>` and import it into
- your Postman application. Set the collection variables `ip adress` and `port` depending on your CDS installation.
- This can be done by right clicking the collection, click `edit` and then go to variables.
- For running CDS in an IDE host should be localhost and port should be 8081. If you run CDS in Kubernetes you can find
- out ip adress and port number of CDS blueprint processor by executing following command:
-
- .. code-block:: bash
-
- kubectl get svc -n onap | grep 'cds-blueprints-processor-http'
-
- cds-blueprints-processor-http ClusterIP 10.152.183.211 <none> 8080/TCP 3h19m
-
- **Set up CDS:**
-
- First run `Bootstrap` request which will call Bootstrap API of CDS. This loads the CDS default model artifacts into CDS DB.
- You should get HTTP status 200 as a response.
-
- You can execute `Get Blueprints` to get all blueprint models in the CDS database. You will see a default
- model "artifactName": "vFW-CDS" in the response body which was loaded by calling bootstrap.
-
- Push the PNF CDS blueprint model data dictionary to CDS with `Data Dictionary` request. Request body contains the
- data from ``dd.json`` of the CBA. This will call the data dictionary endpoint of CDS.
-
- .. note::
- For every data dictionary entry CDS API needs to be called seperately. The postman collection contains a loop to
- go through all entries of :file:`dd.json` and call data dictionary endpoint seperately. To execute this loop,
- open `Runner` in Postman and run `Data Dictionary` request like it is shown in the picture below.
-
- |imageDDPostmanRunner|
-
- Check CDS database for PNF data dictionaries by entering the DB in a terminal. You should see 6 rows as shown below.
-
- For running CDS in an IDE (accessing mariadb container):
-
- .. code-block:: sh
-
- sudo docker exec -it mariadb_container_id mysql -uroot -psdnctl
- > USE sdnctl;
- > select name, data_type from RESOURCE_DICTIONARY where updated_by='Aarna service <vmuthukrishnan@aarnanetworks.com>';
-
- +---------------------+-----------+
- | name | data_type |
- +---------------------+-----------+
- | netconf-password | string |
- | netconf-server-port | string |
- | netconf-username | string |
- | pnf-id | string |
- | pnf-ipv4-address | string |
- | stream-count | integer |
- +---------------------+-----------+
-
- Replace the container id with your running mariadb container id.
-
-
- For running CDS in K8s (accessing MariaDB pod):
-
- Open a terminal and go to ``/Scripts`` directory of your CBA.
-
- .. code-block:: sh
-
- ./connect-cds-mariadb-k8s.sh
-
- select name, data_type from RESOURCE_DICTIONARY where updated_by='Aarna service <vmuthukrishnan@aarnanetworks.com>';
-
- +---------------------+-----------+
- | name | data_type |
- +---------------------+-----------+
- | netconf-password | string |
- | netconf-server-port | string |
- | netconf-username | string |
- | pnf-id | string |
- | pnf-ipv4-address | string |
- | stream-count | integer |
- +---------------------+-----------+
-
-
- **Enrichment:**
-
- .. warning::
- Sometimes there might be issues during enrichment (e.g. some parameters get deleted in the CBA). If you face problems
- during enrichment or deployment later on use the following CBA, which is already enriched:
- :download:`zip <media/pnf-simulator-demo-cba-enriched.zip>`. If you use the enriched CBA, skip
- this section until Deploy/Save Blueprint.
-
- Enrich the blueprint through executing the `Enrich Blueprint` request. Take care to provide the CBA file which you
- downloaded earlier in the request body. After the request got executed save the response body, this will be the
- enriched CBA file.
-
- |saveResponseImage|
-
-
- **Deploy/Save the Blueprint into CDS database**
-
- Run `Save Blueprint` request to save/deploy the Blueprint into the CDS database. Take care to provide the enriched
- CBA file in the request body.
-
- After that you should see the new model "artifactName": "pnf_netconf" by calling `Get Blueprints` request.
-
- **Config-Assign**
-
- The assumption is that we are using the same host to run PNF NETCONF simulator as well as CDS. You will need the
- IP Adress of the Netconf server container which can be found out in terminal with
- ``docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' netopeer2``. In the provided
- postman collection 172.17.0.2 is set as default.
-
- For creating the day-n config we are using the template file ``day-n-pnf-config.template`` in the folder
- ``Scripts/templates`` of the CBA. ``CONFIG_NAME``, ``PNF_IP_ADDRESS`` and ``STREAM_COUNT`` are replaced with specific values.
-
- Day-1 configuration:
-
- Execute the request `Create Config Assign Day-1`. Replace the values in the reqest body if needed.
-
- You can verify the day-1 NETCONF RPC payload looking into CDS DB. You should see the NETCONF RPC with 5
- streams (fw_udp_1 TO fw_udp_5). Connect to the DB like mentioned above and run the below statement. You should
- see the day-1 configuration as an output.
+.. note::
+ The CBA for this PNF Demo gets loaded, enriched and saved in CDS through calling bootstrap. If not done before, call
+ Bootstrap API
- .. code-block:: sh
-
- MariaDB [sdnctl]> select * from TEMPLATE_RESOLUTION where resolution_key='day-1' AND artifact_name='netconfrpc';
-
- <rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
- <edit-config>
- <target>
- <running/>
- </target>
- <config>
- <sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
- <pg-streams>
- <pg-stream>
- <id>fw_udp_1</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_2</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_3</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_4</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_5</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- </pg-streams>
- </sample-plugin>
- </config>
- </edit-config>
- </rpc>
-
-
- **Day-2 configuration:**
-
- Execute the request `Create Config Assign Day-2`. It will do the same request like in day-1-config just with
- different values (resolution-key = day-2, stream-count = 10).
-
- You can verify the day-2 NETCONF RPC payload looking into CDS DB. You should see the NETCONF RPC with 10
- streams (fw_udp_1 TO fw_udp_10). Connect to the DB like mentioned above and run the below statement. You should
- see the day-2 configuration as an output.
-
- .. code-block:: sh
-
- MariaDB [sdnctl]> select * from TEMPLATE_RESOLUTION where resolution_key='day-2' AND artifact_name='netconfrpc';
-
- <rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
- <edit-config>
- <target>
- <running/>
- </target>
- <config>
- <sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
- <pg-streams>
- <pg-stream>
- <id>fw_udp_1</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_2</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_3</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_4</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_5</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_6</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_7</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_8</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_9</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_10</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- </pg-streams>
- </sample-plugin>
- </config>
- </edit-config>
- </rpc>
-
- .. note::
- Until this step CDS did not interact with the PNF simulator or device. We just created the day-1 and day-2
- configurations and stored it in CDS database
-
- **Config-Deploy:**
-
- Now we will make the CDS REST API calls to push the day-1 and day-2 configuration changes to the PNF simulator.
-
- If you run CDS in Kubernetes open a terminal in `/Scripts` folder and keep it running with ``bash -x ./tail-cds-bp-log.sh``,
- we can use this to review the config-deploy actions. If you run CDS in an IDE you can have a look into the IDE terminal.
-
- Executing `Config Assign Day-1 Deploy` request will deploy day-1 configuration. Take care to provide the right PNF
- IP Adress in the request body.
-
- Go back to PNF netopeer cli console like mentioned above and verify if you can see 5 streams fw_udp_1 to fw_udp_5 enabled. If the 5 streams
- appear in the output as follows, the day-1 configuration got successfully deployed and the use case is successfully done.
+Password and username for API calls will be `ccsdkapps`.
- .. code-block:: sh
-
- > get --filter-xpath /sample-plugin:*
- DATA
- <sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
- <pg-streams>
- <pg-stream>
- <id>1</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_1</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_2</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_3</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_4</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- <pg-stream>
- <id>fw_udp_5</id>
- <is-enabled>true</is-enabled>
- </pg-stream>
- </pg-streams>
- </sample-plugin>
- >
+**Config-Assign:**
- Day-2 configuration can be deployed the same way, just use `day-2` as a resolution key in the `Config Assign Depoy`
- request.
+The assumption is that we are using the same host to run PNF NETCONF simulator as well as CDS. You will need the
+IP Adress of the Netconf server container which can be found out with
+``docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' netopeer2``. In the
+following example payloads we will use 172.17.0.2.
- .. note::
- Through deployment we did not deploy the PNF, we just modified the PNF. The PNF could also be installed by CDS
- but this is not targeted in this guide.
+Call the `process` API (``http://{{host}}:{{port}}/api/v1/execution-service/process``) with POST method to
+create day-1 configuration. Use the following payload:
+.. code-block:: JSON
-.. warning::
- Both CBA file and Postman collection should be integrated into source code of CDS. There is already an approach for that,
- see https://gerrit.onap.org/r/c/ccsdk/cds/+/112288. Updated Scripts and Postman collection needs to be added to this change.
+ {
+ "actionIdentifiers": {
+ "mode": "sync",
+ "blueprintName": "pnf_netconf",
+ "blueprintVersion": "1.0.0",
+ "actionName": "config-assign"
+ },
+ "payload": {
+ "config-assign-request": {
+ "resolution-key": "day-1",
+ "config-assign-properties": {
+ "stream-count": 5
+ }
+ }
+ },
+ "commonHeader": {
+ "subRequestId": "143748f9-3cd5-4910-81c9-a4601ff2ea58",
+ "requestId": "e5eb1f1e-3386-435d-b290-d49d8af8db4c",
+ "originatorId": "SDNC_DG"
+ }
+ }
+
+You can verify the day-1 NETCONF RPC payload looking into CDS DB. You should see the NETCONF RPC with 5
+streams (fw_udp_1 TO fw_udp_5). Connect to the DB and run the below statement. You should
+see the day-1 configuration as an output.
+
+.. code-block:: sh
+
+ MariaDB [sdnctl]> select * from TEMPLATE_RESOLUTION where resolution_key='day-1' AND artifact_name='netconfrpc';
+
+ <rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
+ <edit-config>
+ <target>
+ <running/>
+ </target>
+ <config>
+ <sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
+ <pg-streams>
+ <pg-stream>
+ <id>fw_udp_1</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_2</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_3</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_4</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_5</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ </pg-streams>
+ </sample-plugin>
+ </config>
+ </edit-config>
+ </rpc>
+
+For creating day-2 configuration call the same endpoint and use the following payload:
+
+.. code-block:: JSON
+
+ {
+ "actionIdentifiers": {
+ "mode": "sync",
+ "blueprintName": "pnf_netconf",
+ "blueprintVersion": "1.0.0",
+ "actionName": "config-assign"
+ },
+ "payload": {
+ "config-assign-request": {
+ "resolution-key": "day-2",
+ "config-assign-properties": {
+ "stream-count": 10
+ }
+ }
+ },
+ "commonHeader": {
+ "subRequestId": "143748f9-3cd5-4910-81c9-a4601ff2ea58",
+ "requestId": "e5eb1f1e-3386-435d-b290-d49d8af8db4c",
+ "originatorId": "SDNC_DG"
+ }
+ }
+
+
+.. note::
+ Until this step CDS did not interact with the PNF simulator or device. We just created the day-1 and day-2
+ configurations and stored it in CDS database
+
+**Config-Deploy:**
+
+Now we will make the CDS REST API calls to push the day-1 and day-2 configuration changes to the PNF simulator.
+Call the same `process` endpoint with the following payload:
+
+.. code-block:: JSON
+
+ {
+ "actionIdentifiers": {
+ "mode": "sync",
+ "blueprintName": "pnf_netconf",
+ "blueprintVersion": "1.0.0",
+ "actionName": "config-deploy"
+ },
+ "payload": {
+ "config-deploy-request": {
+ "resolution-key": "day-1",
+ "pnf-ipv4-address": "127.17.0.2",
+ "netconf-username": "netconf",
+ "netconf-password": "netconf"
+ }
+ },
+ "commonHeader": {
+ "subRequestId": "143748f9-3cd5-4910-81c9-a4601ff2ea58",
+ "requestId": "e5eb1f1e-3386-435d-b290-d49d8af8db4c",
+ "originatorId": "SDNC_DG"
+ }
+ }
+
+Go back to PNF netopeer cli console like mentioned above and verify if you can see 5 streams fw_udp_1 to fw_udp_5 enabled. If the 5 streams
+appear in the output as follows, the day-1 configuration got successfully deployed and the use case is successfully done.
+
+.. code-block:: sh
+
+ > get --filter-xpath /sample-plugin:*
+ DATA
+ <sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
+ <pg-streams>
+ <pg-stream>
+ <id>1</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_1</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_2</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_3</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_4</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ <pg-stream>
+ <id>fw_udp_5</id>
+ <is-enabled>true</is-enabled>
+ </pg-stream>
+ </pg-streams>
+ </sample-plugin>
+ >
+
+The same can be done for day-2 config (follow same steps just with day-2 in payload).
+
+.. note::
+ Through deployment we did not deploy the PNF, we just modified the PNF. The PNF could also be installed by CDS
+ but this is not targeted in this guide.
Creators of this guide
@@ -930,11 +533,4 @@ Deutsche Telekom AG
Jakob Krieg (Rocketchat @jakob.Krieg); Eli Halych (Rocketchat @elihalych)
-This guide is a derivate from https://wiki.onap.org/display/DW/PNF+Simulator+Day-N+config-assign+and+config-deploy+use+case.
-
-
-.. |saveResponseImage| image:: media/save-response-postman.png
- :width: 500pt
-
-.. |imageDDPostmanRunner| image:: media/dd-postman-runner.png
- :width: 500pt \ No newline at end of file
+This guide is a derivate from https://wiki.onap.org/display/DW/PNF+Simulator+Day-N+config-assign+and+config-deploy+use+case. \ No newline at end of file