diff options
Diffstat (limited to 'appc-common/src/main/resources')
| -rw-r--r-- | appc-common/src/main/resources/org/openecomp/appc/i18n/MessageResources.properties | 792 | ||||
| -rw-r--r-- | appc-common/src/main/resources/org/openecomp/appc/i18n/auth.properties | 23 |
2 files changed, 815 insertions, 0 deletions
diff --git a/appc-common/src/main/resources/org/openecomp/appc/i18n/MessageResources.properties b/appc-common/src/main/resources/org/openecomp/appc/i18n/MessageResources.properties new file mode 100644 index 000000000..0c571cbae --- /dev/null +++ b/appc-common/src/main/resources/org/openecomp/appc/i18n/MessageResources.properties @@ -0,0 +1,792 @@ +### +# ============LICENSE_START======================================================= +# openECOMP : APP-C +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights +# reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# This property file contains all message definitions used by APPC +# +# Message resources are identified by a key, which is defined in the Msg enumeration. This key is +# assigned a value which consists of 4 parts separated by a pipe (|) symbol. These parts are: +# +# 1. The message identifier +# 2. The Message text to be formatted and issued to the user +# 3. The suggested resolution text, how to fix the problem. +# 4. The description text, what is the problem so the user can understand +# +CONFIGURATION_STARTED=APPC0001I|\ + ECOMP Application Controller (APP-C) initialization started at {0}|\ + No resolution is required, this is an informational message|\ + The APP-C component configuration has been started because the component is being \ + initialized or loaded for the first time, or a new instance of the component is \ + being created. This message indicates that the component is starting. + +CONFIGURATION_CLEARED=APPC0002I|\ + All prior configuration has been cleared|\ + No resolution is required, this is an informational message|\ + The APP-C component is being started or restarted and any prior configuration \ + (if present), is cleared. This is normal. + +LOADING_CONFIGURATION_OVERRIDES=APPC0003I|\ + Loading configuration properties from file "{0}"|\ + No resolution is required, this is an informational message|\ + This message indicates that the configuration of the APP-C component was located \ + and is being loaded from the specified file. + +LOADING_DEFAULTS=APPC0004I|\ + Configuration defaults loaded from resource file "{0}"|\ + No resolution is required, this is an informational message|\ + This is a normal indication that the default configuration settings were loaded \ + from the resource file. The APP-C components load a default configuration first \ + so that all configuration values have valid default settings. Any user configuation \ + that may be specified then overrides these defaults. + +NO_DEFAULTS_FOUND=APPC0005E|\ + No default property resource "{0}" was found!|\ + This is an internal error. Contact support.|\ + This is an internal error that indicates that the default resource property file \ + could not be located. This is likely a packaging error and is indicative of \ + a construction problem. Refer this to development or level 3 support for assistance. + +PROPERTY_VALUE=APPC0006I|\ + Property "{0}" ="{1}"|\ + No resolution is required, this is an informational message|\ + This message is issued to show the value of configuration properties and is used to \ + debug start up of the component. + +NO_OVERRIDE_PROPERTY_FILE_LOADED=APPC0007E|\ + No configuration file named [{0}] was found on the configuration search path [{1}]. \ + If a configuration file should have been loaded, check the file name and search \ + path specified. APPC will proceed using the default values and command-line \ + overrides (if any).|\ + If a configuration file was expected, verify the file name and that it exists on \ + the search path for the configuration properties. The search path defaults to \ + <em>${user.home},/opt/app/appc/etc,etc,../etc,/etc,.</em> and can be overridden \ + by specification of the property <em>org.openecomp.appc.bootstrap.path</em>. The \ + property file name defaults to <em>appc.properties</em> and can also be \ + overridden by the <em>org.openecomp.appc.bootstrap.file</em> property.|\ + This message indicates that the bootstrap path was searched for the bootstrap \ + property file (a file that can be supplied to configure APPC) and that no file \ + with the specified name was found on any of the path elements of the path. + +SEARCHING_CONFIGURATION_OVERRIDES=APPC0008I|\ + Searching path "{0}" for configuration settings "{1}"|\ + No resolution is required|\ + This message indicates that the specified path is being examined for a configuration \ + file of the indicated name. The configuration file defaults to <em>appc.properties</em> \ + but can be overridden by specification of the <em>org.openecomp.appc.bootstrap.file</em> \ + property (using a command-line override, for example). This message is intended to \ + assist in the debugging and analysis of configuration issues where the indicated \ + file may not be processed or found. The path that is searched is a comma-delimited \ + list of directories and defaults to <em>${user.home},/opt/app/appc/etc,etc,../etc,/etc,.</em> \ + but can also be overridden by specification of the <em>org.openecomp.appc.bootstrap.path</em> \ + property. + +LOADING_APPLICATION_OVERRIDES=APPC0009I|\ + Loading application-specific override properties|\ + No resolution required|\ + This message indicates that the APPC component was invoked as an embedded component \ + and that the caller has supplied an override property object. + +NO_APPLICATION_OVERRIDES=APPC0010I|\ + No application-specific override properties were provided!|\ + No resolution required|\ + This message indicates that the APPC component was invoked as an embedded component \ + and that the caller has supplied an override property object, but that object was \ + empty. + +MERGING_SYSTEM_PROPERTIES=APPC0011I|\ + Merging system properties into configuration|\ + No resolution is required|\ + This message indicates that the java virtual machine system properties are being \ + examined and merged into the APP-C component configuration. This allows for command \ + line specification of any APP-C configuration property as a standard java define \ + JVM option (ex: -Dproperty=value). + +SETTING_SPECIAL_PROPERTY=APPC0012I|\ + Setting property "{0}={1}" in system properties|\ + No resolution required.|\ + This message indicates that the specified property loaded from defaults, property \ + file overrides, application overrides, or command-line overrides is being placed \ + in the system (java virtual machine) properties object. Some libraries that may \ + be integrated with APP-C (for example, DME2 or AFT libraries) may only look for \ + their properties in the system properties object. This allows those components \ + to be configured from the APP-C configuration. + +LOADING_RESOURCE_BUNDLE=APPC0013I|\ + Loading resource bundle "{0}"|\ + No resolution required|\ + This message indicates that the specified resource bundle is being loaded. + +LOGGING_ALREADY_INITIALIZED=APPC0014W|\ + Logging has already been initialized, check the container logging definitions to ensure \ + they represent your desired logging configuration.|\ + If logging is configured incorrectly, move the definitions to the container or component \ + that first initialized logging. If they are ok, no resolution is required.|\ + This message indicates that the logging environment already exists and has been configured. + +SEARCHING_LOG_CONFIGURATION=APPC0015I|\ + Searching path "{0}" for log configuration file "{1}"|\ + No resolution is required|\ + This message indicates that the APP-C component configuration file specified a logging \ + configuration file and/or search path and the path is being searched. This is used to \ + assist in debugging the configuration process. + +LOADING_DEFAULT_LOG_CONFIGURATION=APPC0016I|\ + Loading default logging configuration from system resource file "{0}"|\ + No resolution is required|\ + A default logging configuration for the component is loaded from system resources to \ + ensure that a valid logging environment exists. This is a normal message, and will \ + be followed by APPC0019I if a user-specified logging configuration overrides the \ + defaults. + +NO_LOG_CONFIGURATION=APPC0017E|\ + No log configuration could be found or defaulted!|\ + A valid logging configuration cannot be found, and no default configuration resource \ + was loaded. This is likely a packaging issue and should be referred to development \ + or level 3 support for assistance.|\ + This is an internal error. + +UNSUPPORTED_LOGGING_FRAMEWORK=APPC0018E|\ + An unsupported logging framework is bound to SLF4J. Only Logback or Log4J are supported.|\ + This is a compatibility error with logging frameworks used in the application environment \ + and should be referred to development or level 3 support for assistance.|\ + This is an internal error. + +LOADING_LOG_CONFIGURATION=APPC0019I|\ + Loading logging configuration from file "{0}"|\ + No resolution is required|\ + The specified logging configuration is being loaded. + +UNKNOWN_PROVIDER=APPC0020E|\ + Provider {0} cannot be found or cannot be resolved to one of the known providers, [{1}].|\ + Specify the name of a valid provider. The IAAS adapter contains a set of providers \ + that are defined. Each of these providers is assigned a logical name. The call \ + to the IAAS adapter must specify the name of the provider that is desired. This \ + could be the result of an incorrect call, or the IAAS adapter configuration is \ + wrong.|\ + The APP-C IAAS adapter is being called to request a service on a specific provider, but \ + the name of the provider cannot be found in the list of defined providers. This may \ + be an error in the directed graph that contains the call to the IAAS adapter, or it \ + may be an error in the request, or the configuration of the IAAS adapter may need \ + to be updated. + +SERVER_STATE_CHANGE_TIMEOUT=APPC0021E|\ + Server name "{0}" with id "{1}" in tenant "{2}" and region "{3}" did not change state \ + within the alloted time. Current state is "{4}" and the desired state(s) are "{5}"|\ + This is likely a provider issue. If the provider is OpenStack, check the virtual \ + machine on the horizon dashboard. If the machine is in an invalid state, you may \ + need to contact Openstack support. The exact mechanisms for recovery of a machine \ + in an invalid state are varied and will be different from provider to provider.|\ + This message indicates that the IAAS adapter has performed some requested action \ + on the specified server (virtual machine) but the server did not enter a valid \ + state (running, stopped, etc) within the timeout period. The last state (current state) \ + is shown, as well as the state that was expected. The servers name, UUID, containing \ + tenant, and region are shown so that the correct provider can be examined. + +SERVER_DELETED=APPC0022E|\ + Server name "{0}" with id "{1}" in tenant "{2}" has a state of deleted and cannot be {3}.|\ + The specified server has been deleted on the provider. This is likely an incorrect \ + request. Make sure that you are specifying the correct server ID/name, provider, \ + and region. If the self-link URL is used, make sure that the correct server resource \ + is specified. If the machine was correct, recreate or rebuild the machine to make \ + it usable. Correct the request.|\ + This message indicates that the server specified was found to have been deleted in the \ + target provider and that the requested action cannot be performed. This may be caused \ + by several things:\ + <ol>\ + <li>The UUID of the server is wrong and specifies a machine that no longer exists</li>\ + <li>The machine was deleted by a different process or request</li>\ + <li>The wrong provider was requested</li>\ + <li>The request was out-of-order</li>\ + </ol> + +UNKNOWN_SERVER_STATE=APPC0023E|\ + Server name "{0}" with id "{1}" in tenant "{2}" has an unknown state of "{3}".|\ + Check the machine to determine the state of the machine. Correct that state to a valid \ + state if possible. This may also be caused by an internal error in the PAL (Provider \ + Abstraction Layer) used by the IAAS if a new state definition has been added to the \ + provider (such as a new version or the installation of an unknown or unsupported \ + extension). If the machine's state is valid, refer this error to development or \ + level 3 support for assistance.|\ + This message indicates that a request was made to the IAAS adapter to take some action \ + on the specified virtual machine, but the machine was found to be in a state that \ + prevents that action from being performed. + +COMPONENT_INITIALIZING=APPC0024I|\ + {0} component {1} is being initialized...|\ + No resolution needed|\ + The IAAS adapter is being initialized + +COMPONENT_INITIALIZED=APPC0025I|\ + {0} component {1} has completed initialization|\ + No resolution needed|\ + The IAAS adapter has been initialized + +COMPONENT_TERMINATING=APPC0026I|\ + {0} component {1} is terminating...|\ + No resolution needed|\ + The IAAS adapter is being terminated + +COMPONENT_TERMINATED=APPC0027I|\ + {0} component {1} has terminated|\ + No resolution needed|\ + The IAAS adapter has been terminated + +IAAS_ADAPTER_UNSUPPORTED_OPERATION=APPC0028E|\ + Operation {0} is not supported or implemented at this time.|\ + Change the request to a supported operation|\ + The IAAS adapter has been requested to perform some operation that it cannot \ + perform at this time. + +IAAS_ADAPTER_RPC_CALLED=APPC0029I|\ + Operation [{0}] called. Input document:\n{1}|\ + No resolution required|\ + The IAAS adapter operation indicated was called with the requested input \ + parameters. + +NO_SERVICE_FOUND=APPC0030E|\ + Unable to locate the [{0}] service in the OSGi container|\ + Ensure that the feature containing that service is installed and running|\ + This indicates that the required feature could not be located + +CONTEXT_PARAMETERS_DISPLAY=APPC0031I|\ + Dump of context parameters for module [{0}], RPC [{1}], and version [{2}]|\ + No resolution required|\ + The specified RPC is being called and the context properties are being \ + displayed. This is a debugging message and preceeds the display of \ + each context property. + +RESPONSE_PARAMETERS_DISPLAY=APPC0032I|\ + Response properties from execution of module [{0}], RPC [{1}], and version [{2}] are:|\ + No resolution required|\ + The service logic directed graph has been executed and returned the response properties. \ + This message preceeds the dump of the response properties. It is used for debugging \ + of service logic and execution problems. + +NULL_OR_INVALID_ARGUMENT=APPC0033E|\ + Service {0}:{1} was provided a null (empty) or invalid argument, [{2}] = [{3}]|\ + This is likely an internal error, refer to support for assistance|\ + The indicated service was called, but the specified parameter or argument was either \ + null or empty, or it was invalid. If it has a value, the value is shown. If the \ + value is null, the value is shown as 'null'. + +PROCESSING_REQUEST=APPC0034I|\ + Service {0}:{1} is processing service [{2}] with request id [{3}]|\ + No resolution required|\ + The indicated application and RPC is processing the specified service request. + +INVALID_SERVICE_REQUEST=APPC0035E|\ + Service {0}:{1} received request for service [{2}] but that service is invalid or unknown.|\ + Correct the service request, likely a directed graph issue|\ + The RPC was invoked to process a service request, but the service is not valid. + +REGISTERING_SERVICE=APPC0036I|\ + {0} registering service {1} using class {2}|\ + No resolution required|\ + The indicated application service is registering itself with the OSGi container using the \ + indicated java class name. + +UNREGISTERING_SERVICE=APPC0037I|\ + {0} unregistering service {1}|\ + No resolution required|\ + The application service is being unregistered from the OSGi container services list. + +LOADING_PROVIDER_DEFINITIONS=APPC0038I|\ + {0} IAAS Adapter initializing provider {1} as {2}|\ + No resolution is required|\ + The IAAS adapter is loading the definition of the specified provider from its \ + configuration file. + +RESTARTING_SERVER=APPC0039I|\ + {0} IAAS Adapter restart of server requested|\ + No resolution required|\ + A graph has invoked the IAAS adapter and has requested the restart of a server. The \ + properties that govern the request are echoed immediately following this message. + +REBUILDING_SERVER=APPC0040I|\ + {0} IAAS Adapter rebuild of server requested|\ + No resolution required|\ + A graph has invoked the IAAS adapter and has requested the rebuilding of a server. The \ + properties that govern the request are echoed immediately following this message. + +INVALID_SELF_LINK_URL=APPC0041E|\ + {0} IAAS Adapter cannot perform requested service, VM url [{1}] is invalid|\ + Correct the call to the adapter with a valid self-link URL|\ + The IAAS adapter has been called to perform some operation on a virtual machine \ + but the vm_id of the virtual machine is not valid. + +SERVER_FOUND=APPC0042I|\ + Located server {0} on tenant [{1}] and in state [{2}]|\ + No resolution required|\ + This message indicates that a service request was made to perform some action on the server \ + and the indicated server was located on the specified tenant.\ + + +STACK_FOUND=APPC0042I|\ + Located stack {0} on tenant [{1}] and in state [{2}]|\ + No resolution required|\ + This message indicates that a service request was made to perform some action on the server \ + and the indicated server was located on the specified tenant. + + + +SERVER_NOT_FOUND=APPC0043E|\ + No server found in provider with self-link URL [{0}]|\ + Correct the server URL|\ + The requested server, identified by its self link URL, could not be found in the provider + +SERVER_OPERATION_EXCEPTION=APPC0044E|\ + Exception {0} was caught attempting {1} of server [{2}] on tenant [{3}]|\ + Contact support for assistance|\ + An exception was caught while trying to perform the indicated operation on the server. The \ + exception may yield more information about the cause of the error. This may be because \ + of access security, or the server is in an invalid state, or any number of reasons. This \ + message should be referred to support for assistance. + + +STACK_NOT_FOUND=APPC0043E|\ + No stack found in provider with self-link URL [{0}]|\ + Correct the server URL|\ + The requested stack, identified by its self link URL, could not be found in the provider + +STACK_OPERATION_EXCEPTION=APPC0044E|\ + Exception {0} was caught attempting {1} of server [{2}] on tenant [{3}]|\ + Contact support for assistance|\ + An exception was caught while trying to perform the indicated operation on the stack. The \ + exception may yield more information about the cause of the error. This may be because \ + of access security, or the stack is in an invalid state, or any number of reasons. This \ + message should be referred to support for assistance. + +MISSING_REQUIRED_PROPERTIES=APPC0045E|\ + One or more properties for [{0}] are missing, null, or empty. They are:|\ + A request to execute the adapter indicated was made from a directed graph, but the properties \ + of the request that are required by the adapter are missing or do not have a value. Correct \ + the directed graph to supply the missing properties.|\ + The specified properties for the indicated adapter operation are invalid or missing. + +SERVER_ERROR_STATE=APPC0046E|\ + The server [{0}] (id={1}) in tenant {2} is in error state, {3} is not allowed|\ + Destroy and recreate the instance|\ + A request to restart or rebuild a server in an error state was received, but those operations \ + are not allowed on a server in this state. OpenStack only allows a deletion of a server \ + that is in the error state. + +IMAGE_NOT_FOUND=APPC0047E|\ + The image {0} could not be located for {1}.|\ + The image indicated could not be found. If the operation being requested is a rebuild of \ + a server, then there is no action that can be taken other than to destroy the server and \ + rebuild it using an image that exists.|\ + This is likely caused by an image being deleted after it was used to build a server. If the \ + request is for a server rebuild, then the image used to create the server was later deleted \ + and no longer exists. The server cannot be rebuilt, because the image doesnt exist. \ + The server must be deleted and reconstructed using a valid, existing image. + +STATE_CHANGE_TIMEOUT=APPC0048E|\ + Time out waiting for {0} with name {1} (and id {2}) to reach one of {3} states, current state is {4}|\ + Recover the resource in whatever means is appropriate|\ + The resource indicated (by name and id) was expected to change it's state (status) to one of the \ + indicated expected states within a specified timeout but the resource did not complete the \ + state change. It's current state is also shown. This can be caused by any number of factors \ + but is normally a problem or conflict within the IaaS provider (OpenStack). + +STATE_CHANGE_EXCEPTION=APPC0049E|\ + Exception {0} waiting for {1} with name {2} (and id {3}) to reach one of {4} states, current state is {5}\n\ + cause={6}|\ + Recover the resource in whatever means is appropriate|\ + The resource indicated (by name and id) was expected to change it's state (status) to one of the \ + indicated expected states within a specified timeout but the resource did not complete the \ + state change. It's current state is also shown. This can be caused by any number of factors \ + but is normally a problem or conflict within the IaaS provider (OpenStack). + +STOP_SERVER=APPC0050I|\ + Server {0} is being stopped...|\ + No recovery required|\ + The processing being performed by APPC requires that the indicated server be stopped. + +START_SERVER=APPC0051I|\ + Server {0} is being started...|\ + No recovery required|\ + The processing being performed by APPC requires that the indicated server be started. + +RESUME_SERVER=APPC0052I|\ + Server {0} is being resumed...|\ + No recovery required|\ + The processing being performed by APPC requires that the indicated server be resumed from a suspended state. + +UNPAUSE_SERVER=APPC0053I|\ + Server {0} is being unpaused...|\ + No recovery required|\ + The processing being performed by APPC requires that the indicated server be unpaused from a paused state. + +CONNECTION_FAILED_RETRY=APPC0054E|\ + Connection to provider {0} at identity {1} using tenant name {2} (id {3}) failed, reason={4}, \ + retrying in {5} seconds, attempt {6} of {7}.|\ + The connection to the provider could not be obtained for the indicated reason. The application \ + controller will retry the attempt to connect to the provider a maximum number of times. The \ + message contains the amount of time the system will wait to retry the connection, and the \ + current attempt and the maximum number of attempts.|\ + Correct the cause of the connection failure as indicated by the reason. + +CONNECTION_FAILED=APPC0055E|\ + Connection to provider {0} at service {1} failed after all retry attempts.|\ + The connection to the named provider at the indicated service URL cannot be opened. All \ + retries have been exhausted. The application controller is giving up on the connection and will \ + fail the request.|\ + Correct the cause of the connection failure as indicated by the reason(s) in previous APPC0054E \ + messages. + +STOPPING_SERVER=APPC0056I|\ + {0} IAAS Adapter stop server requested|\ + No resolution required|\ + A graph has invoked the IAAS adapter and has requested the server to be stopped. The \ + properties that govern the request are echoed immediately following this message. + +REBUILD_SERVER_FAILED=APPC0057E|\ + Server {0} (id {1}) failed to rebuild, reason {2}|\ + The server rebuild failed for the indicated reason. Correct the cause of the failure and \ + rerun, if applicable.|\ + The adapter has attempted to rebuild the indicated server but the rebuild request has \ + been failed by the provider for some reason. The reason returned by the provider is \ + included in the message. + +PARAMETER_IS_MISSING=APPC0058E|\ + Application {0} graph {1} response did not set the {2} parameter. This parameter is \ + required for synchronization with the controller. Absence of this parameter is assumed \ + to be a failure. Please correct the DG.|\ + The indicated directed graph was called from the application controller but when the \ + graph returned the indicated property was not defined in the return parameters. The \ + controller requires that property to be defined and set to a value that is used to \ + inform the controller of the outcome of operations in the graph. Failure to set \ + the required parameter is assumed to be a failure regardless if the graph actually \ + succeeded or not.|\ + Correct the DG to set the specified parameter to a value that is expected and understood \ + by the controller. + +PARAMETER_NOT_NUMERIC=APPC0059E|\ + Application {0} graph {1} did not set parameter {2} to a valid numeric value ({3}). \ + Please correct the DG.|\ + The indicated directed graph was called by the application controller and the graph \ + did set the specified property, however the property is not a valid numeric \ + value. The parameter is used to convey a numeric quantity and the controller \ + cannot convert the value specified to a number. |\ + Correct the DG. + +DG_FAILED_RESPONSE=APPC0060E|\ + Application {0} graph {1} completed with failure: error code = {2}, message = {3}|\ + The directed graph indicated was called by the application controller and when \ + the graph returned, an error code was set indicating that the graph failed. This \ + is a message that echoes the results of the graph, and shows the returned error \ + code and message.|\ + Correct the cause of the error. + +EXCEPTION_CALLING_DG=APPC0061E|\ + Application {0} received exception {1} attempting to call graph {2}, exception \ + message = {3}|\ + The application controller attempted to call the service logic interpreter (SLI) \ + to execute the indicated graph, but an exception was caught. The class of the \ + exception is shown, as is the message associated with the exception. An \ + abbreviated stack trace is also displayed to provide information as to the \ + state of the thread at the time of the exception.|\ + Correct the cause of the exception and rerun. + +GRAPH_NOT_FOUND=APPC0062E|\ + Application {0} was unable to locate graph {1}|\ + The application controller attempted to call the service logic interpreter (SLI) \ + to execute the specified graph but the graph does not exist in the SLI database.|\ + Correct the database and install the correct graph. + +DEBUG_GRAPH_RESPONSE_HEADER=APPC0063D|\ + Application {0} graph {1} responded with {2} properties|\ + This is a debugging message that is output immediately after the call to the \ + directed graph and before any processing is performed to determine the success \ + or failure of that call. The heading is output prior to dumping all the parameters \ + that were returned by the graph.|\ + No recovery action is required. + +DEBUG_GRAPH_RESPONSE_DETAIL=APPC0064D|\ + {0}:{1} - {2} = {3}|\ + This is a debugging message that is output immediately after the call to the \ + directed graph and before any processing is performed to determine the success \ + or failure of that call. This message is repeated for each parameter that \ + exists in the return context from the graph.|\ + No recovery action is required. + +INVALID_REQUIRED_PROPERTY=APPC0065E|\ + Application {0} request "{1}" was supplied a property "{2}" with the value "{3}" \ + that does not meet the required form(s):|\ + This message indicates that the specified requested operation was passed the \ + specific property named and the property value did not meet the expected \ + format requirements. For example, if the property is expected to be a \ + numeric quantity and it contains alphabetic characters, or if it is expected \ + to be a URL and it is not valid. The message also contains a list of one \ + or more regular expressions that were used to validate the input, and which \ + supply the syntax required for the property.|\ + Correct the property and retry. + +MIGRATING_SERVER=APPC066I|\ + {0} IAAS Adapter migrate of server requested|\ + No resolution required|\ + A graph has invoked the IAAS adapter and has requested the migration of a server. The \ + properties that govern the request are echoed immediately following this message. + +EVACUATING_SERVER=APPC0067I|\ + {0} IAAS Adapter evacuate of server requested|\ + No resolution required|\ + A graph has invoked the IAAS adapter and has requested the evacuation of a server. The \ + properties that govern the request are echoed immediately following this message. + +MIGRATE_SERVER_FAILED=APPC0068E|\ + Server {0} (id {1}) failed to migrate during {2} phase, reason {3}|\ + The server migration failed for the indicated reason. Correct the cause of the failure and \ + rerun, if applicable.|\ + The adapter has attempted to migrate the indicated server but the migration request has \ + been failed by the provider for some reason. The reason returned by the provider is \ + included in the message. + +EVACUATE_SERVER_FAILED=APPC0069E|\ + Server {0} (id {1}) failed to evacuate, reason {2}|\ + The server evacuation failed for the indicated reason. Correct the cause of the failure and \ + rerun, if applicable.|\ + The adapter has attempted to evacuate the indicated server but the evacuation request has \ + been failed by the provider for some reason. The reason returned by the provider is \ + included in the message. + +APPC_TOO_BUSY=APPC0080E|\ + APP-C instance is too busy|\ + The APP-C instance handles too many requests and cannot accept new ones as its internal \ + execution queue is full. The problem can appear when the APP-C instance gets more requests \ + than it can handle simultaneously.|\ + Check the server KPIs for possible performance issues (e.g. insufficient memory, \ + high network latency, slow responsiveness of southbound systems and so on) which can affect \ + the system throughput. + +VF_SERVER_BUSY=APPC0081E|\ + Concurrent access to server "{0}"|\ + APP-C currently executes a command on the specified server and cannot accept yet another request \ + for the same one.|\ + Try to resubmit the request at later time. + +VF_ILLEGAL_COMMAND=APPC0082E|\ + Server "{0}" does not support command "{1}" in the current state "{2}"|\ + APP-C cannot perform the requested command on the server in the current state as no state transition \ + is defined for that.|\ + Contact support for assistance. + +VF_UNDEFINED_STATE=APPC0083E|\ + Server "{0}" cannot handle command "{1}" because of its doubtful state|\ + The resource has undefined working state as result of abnormal termination of a previous command.|\ + Recover the resource in whatever means is appropriate. + +APPC_NO_RESOURCE_FOUND=APPC0084E|\ + No resource found with ID "{0}" in A&AI system.|\ + APP-C is unable to resolve the VF details given the instance ID.|\ + Check whether the resource has been deleted (terminated) before. + +APPC_EXPIRED_REQUEST=APPC0085E|\ + The request "{0}" for server "{1}" has exceeded its TTL limit of "{2}" seconds|\ + The received expired event won't be handled by APP-C instance. Normally the problem might be \ + related to asynchronous requests arriving to APP-C instance via DMaaP channel.|\ + Try to submit a new request if still relevant. + +APPC_WORKFLOW_NOT_FOUND=APPC0086E|\ + Workflow for vnfType = "{0}" and command = "{1}" not found.|\ + Unable to retrive Workflow related to mention VNF type and command.|\ + Check provided VNF and Command details are correct. + +APPC_INVALID_INPUT=APPC0087E|\ + Null vnfId and command provided|\ + Request contains Null vnfId and command|\ + Provided non-null VNF and Command details. + +APPC_AUDIT_MSG=APPC0090A|\ + Operation "{0}" for VNF type "{1}" from Source "{2}" with RequestID "{3}" \ + was started at "{4}" and ended at "{5}" with status code "{6}"|\ + Audit detailed msg|\ + Audit detailed msg. + +AAI_CONNECTION_FAILED=APPC0106E|\ + APP-C is unable to communicate with A&AI|\ + Connection to A&AI at service {0} failed after all retry attempts.|\ + The connection to the A&AI at the indicated service URL cannot be opened. \ + All retries have been exhausted. APP-C is giving up on the connection and will?\ + reject the operation request.|\ + . + +AAI_UPDATE_FAILED=APPC0107E|\ + APP-C is unable to update COMPONENT_ID {0} to {1} for reason {2}|\ + The update at the end of the operation wasn't performed as a result of \ + A&AI communication failure or its internal error.|\ + . + +AAI_GET_DATA_FAILED=APPC0108E|\ + APP-C is unable to retrieve VF/VFC {0} data for Transaction ID?{1}?as a \ + result of A&AI communication failure or its internal error.|\ + Operation request will be rejected by APP-C|\ + . + +AAI_CONNECTION_FAILED_RETRY=APPC0105W|\ + A&AI at identity {0} using VNF_ID {1} failed, reason={2}, retrying in {3} seconds, attempt {4} of {5}.|\ + The connection to the A&AI could not be obtained for the indicated reason. APP-C will retry to connect \ + to the A&AI. The?message contains the retry delay, the current attempt and the maximum number of attempts.|\ + Correct the cause of the connection failure as indicated by the reason.? + +AAI_DELETE_FAILED=APPC0114E|\ + APP-C is unable to delete COMPONENT_ID {0} for reason {1}|\ + The deletion at the end of the operation wasn't performed as a result of \ + A&AI communication failure or its internal error.|\ + . + +VNF_CONFIGURED=APPC0118I|\ + VNF {0} is configured|\ + No resolution is required, this is an informational message|\ + The VNF configuration has been completed. + +VNF_CONFIGURATION_STARTED=APPC0116I|\ + VNF {0} is being configured|\ + No resolution is required, this is an informational message|\ + The VNF configuration has been started + +VNF_CONFIGURATION_FAILED=APPC0119E|\ + VNF {0} configuration failed for reason {1}|\ + The configuration operation wasn't performed as a result of VNF communication failure or its internal error.|\ + . + +VNF_TEST_STARTED=APPC0120I|\ + VNF {0} is being tested|\ + No resolution is required, this is an informational message|\ + The VNF test has been started + +VNF_TESTED=APPC0121I|\ + VNF {0} was tested|\ + No resolution is required, this is an informational message|\ + The VNF test has been completed + +VNF_TEST_FAILED=APPC0122E|\ + VNF {0} test failed for reason {1}|\ + The test operation wasn't performed as a result of VNF communication failure or its internal error.|\ + . + +STOP_SERVER_FAILED=APPC0112E|\ + Server {0} (id {1}) failed to stop during {2} phase, reason {3}|\ + The server stop failed for the indicated reason. Correct the cause of the failure and \ + rerun, if applicable.|\ + The adapter has attempted to stop the indicated server but the stop request has \ + been failed by the provider for some reason. The reason returned by the provider is \ + included in the message. + +TERMINATE_SERVER_FAILED=APPC0113E|\ + Server {0} (id {1}) failed to terminate during {2} phase, reason {3}|\ + The server termination failed for the indicated reason. Correct the cause of the failure and \ + rerun, if applicable.|\ + The adapter has attempted to terminate the indicated server but the migration request has \ + been failed by the provider for some reason. The reason returned by the provider is \ + included in the message. + +TERMINATE_STACK_FAILED=APPC0113E|\ + Server {0} (id {1}) failed to terminate during {2} phase, reason {3}|\ + The server termination failed for the indicated reason. Correct the cause of the failure and \ + rerun, if applicable.|\ + The adapter has attempted to terminate the indicated server but the migration request has \ + been failed by the provider for some reason. The reason returned by the provider is \ + included in the message. + +TERMINATING_SERVER=APPC0114I|\ + {0} IAAS Adapter?terminate server requested|\ + No resolution required|\ + A graph has invoked the IAAS adapter and has requested the server to be terminated. The \ + properties that govern the request are echoed immediately following this message. + + +TERMINATING_STACK=APPC0115I|\ + {0} IAAS Adapter?terminate stack requested|\ + No resolution required|\ + A graph has invoked the IAAS adapter and has requested the server to be terminated. The \ + properties that govern the request are echoed immediately following this message. + +TERMINATE_SERVER=APPC0116I|\ + Server {0} is being?terminated...|\ + No recovery required|\ + The processing being performed by APPC requires that the indicated server be terminated. + +TERMINATE_STACK=APPC0117I|\ + Stack {0} is being?terminated...|\ + No recovery required|\ + The processing being performed by APPC requires that the indicated server be terminated. + +MIGRATE_COMPLETE=APPC0118I|\ + Migrate {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\ + No resolution is required, this is an informational message|\ + APP-C Migrate Operation has completed. + +RESTART_COMPLETE=APPC0119I|\ + Restart {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\ + No resolution is required, this is an informational message|\ + APP-C Restart Operation has completed. + +REBUILD_COMPLETE=APPC0120I|\ + Rebuild {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\ + No resolution is required, this is an informational message|\ + APP-C Rebuild Operation has completed. + +CLOSE_CONTEXT_FAILED=APPC0121E|\ + Exception {0} was caught attempting to close provider context for {1}.|\ + Contact support for assistance|\ + An exception was caught while trying to close the provider context. The \ + exception may yield more information about the cause of the error. This may be because \ + of access security, or the server is in an invalid state, or any number of reasons. This \ + message should be referred to support for assistance. + +SNAPSHOTING_STACK=APPC0122I|\ + Stack {0} is being?snapshoted...|\ + No resolution is required|\ + Stack snapshot. + +STACK_SNAPSHOTED==APPC0123I|\ + Stack {0} snapshoted, snapshot ID = [{1}].|\ + No resolution is required|\ + Stack snapshoted successfully. + + +RESTORING_STACK=APPC0124I|\ + Stack {0} is being?restored to snapshot {1}...|\ + No resolution is required|\ + Stack restore. + +STACK_RESTORED=APPC0125I|\ + Stack {0} is restored to snapshot {1}.|\ + No resolution is required|\ + Stack restored successfully. + +MISSING_PARAMETER_IN_REQUEST=APPC0126E|\ + Parameter {0} is missing in svc request of {1}.|\ + Check DG node definition to pass missing parameter's value.|\ + Node definition in DG missing indicated parameter value or value is incorrect, \ + check the graph definition. + +CANNOT_ESTABLISH_CONNECTION=APPC0127E|\ + Cannot establish connection to server {0} port {1} with user {2}.|\ + Check server IP, port and user credentials.|\ + Wrong data sent in request's payload. + + +APPC_METRIC_MSG=APPC0128I|\ + Operation "{0}" for VNF type "{1}" from Source "{2}" with RequestID "{3}" on "{4}" with action "{5}" \ + ended in {6} ms with result "{7}"|\ + No resolution is required, this is an informational message|\ + This message indicates that the APPC logged some operation to metric diff --git a/appc-common/src/main/resources/org/openecomp/appc/i18n/auth.properties b/appc-common/src/main/resources/org/openecomp/appc/i18n/auth.properties new file mode 100644 index 000000000..bdb5af244 --- /dev/null +++ b/appc-common/src/main/resources/org/openecomp/appc/i18n/auth.properties @@ -0,0 +1,23 @@ +### +# ============LICENSE_START======================================================= +# openECOMP : APP-C +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights +# reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +username=admin +password=admin |