diff options
Diffstat (limited to 'appc-adapters')
8 files changed, 2 insertions, 1845 deletions
diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleModule.py b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleModule.py deleted file mode 100644 index 3458c28bc..000000000 --- a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleModule.py +++ /dev/null @@ -1,170 +0,0 @@ -''' -/*- -* ============LICENSE_START======================================================= -* ONAP : APPC -* ================================================================================ -* Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -* ================================================================================ -* Copyright (C) 2017 Amdocs -* ============================================================================= -* Licensed under the Apache License, Version 2.0 (the "License"); -* you may not use this file except in compliance with the License. -* You may obtain a copy of the License at -* -* http://www.apache.org/licenses/LICENSE-2.0 -* -* Unless required by applicable law or agreed to in writing, software -* distributed under the License is distributed on an "AS IS" BASIS, -* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -* See the License for the specific language governing permissions and -* limitations under the License. -* -* ECOMP is a trademark and service mark of AT&T Intellectual Property. -* ============LICENSE_END========================================================= -*/ -''' - -import os, subprocess -import sys -from collections import namedtuple -import json - -import uuid - -def ansibleSysCall (inventory_path, playbook_path, nodelist, mandatory, - envparameters, localparameters, lcm, timeout): - - print "***> in AnsibleModule.ansibleSysCall" - print " EnvParameters: ", envparameters - print " LocalParameters:", localparameters - print " Inventory: ", inventory_path - print " Playbook: ", playbook_path - print " NodeList: ", nodelist - print " Mandatory: ", mandatory - print " Timeout: ", timeout - log = [] - - str_parameters = '' - - if not envparameters == {}: - for key in envparameters: - if str_parameters == '': - str_parameters = '"' + str(key) + '=\'' + str(envparameters[key]) + '\'' - else: - str_parameters += ' ' + str(key) + '=\'' + str(envparameters[key]) + '\'' - str_parameters += '"' - - if len(str_parameters) > 0: - cmd = 'timeout --signal=KILL ' + str(timeout) + \ - ' ansible-playbook -v --extra-vars ' + str_parameters + ' -i ' + \ - inventory_path + ' ' + playbook_path - else: - cmd = 'timeout --signal=KILL ' + str(timeout) + \ - ' ansible-playbook -v -i ' + inventory_path + ' ' + playbook_path - - print " CMD: ", cmd - - print "\n =================ANSIBLE STDOUT BEGIN============================================\n" - p = subprocess.Popen(cmd, shell=True, - stdout=subprocess.PIPE, - stderr=subprocess.STDOUT) - # p.wait() - (stdout_value, err) = p.communicate() - - stdout_value_cleanup = '' - for line in stdout_value: - stdout_value_cleanup += line.replace(' ', ' ') - stdout_value = stdout_value_cleanup.splitlines() - - ParseFlag = False - retval = {} - returncode = p.returncode - - if returncode == 137: - - print " ansible-playbook system call timed out" - # ansible-playbook system call timed out - for line in stdout_value: # p.stdout.readlines(): - log.append (line) - - - elif 'ping' in lcm: - - targetnode = envparameters['TargetNode'].split(' ') - str_json = None - for line in stdout_value: # p.stdout.readlines(): - print line # line, - if "PLAY RECAP" in line: - ParseFlag = False - if ParseFlag and len(line.strip())>0: - str_json += line.strip() - if "TASK [debug]" in line: - ParseFlag = True - str_json = '' - log.append (line) - - if str_json: - if '=>' in str_json: - out_json =eval(str_json.split('=>')[1].replace('true','True').replace('false','False')) - - if 'ping.stdout_lines' in out_json: - for node in targetnode: - ip_address = node - ok_flag = '0' - changed_flag = '0' - unreachable_flag = '0' - failed_flag = '1' - for rec in out_json['ping.stdout_lines']: - if node in rec and "is alive" in rec: - ok_flag = '1' - changed_flag = '1' - unreachable_flag = '0' - failed_flag = '0' - for rec in out_json['ping.stdout_lines']: - if node in rec and "address not found" in rec: - ok_flag = '0' - changed_flag = '0' - unreachable_flag = '1' - failed_flag = '0' - retval[ip_address]=[ok_flag, changed_flag, unreachable_flag, - failed_flag] - else: - - for line in stdout_value: # p.stdout.readlines(): - print line # line, - if ParseFlag and len(line.strip())>0: - ip_address = line.split(':')[0].strip() - ok_flag = line.split(':')[1].strip().split('=')[1].split('changed')[0].strip() - changed_flag = line.split(':')[1].strip().split('=')[2].split('unreachable')[0].strip() - unreachable_flag = line.split(':')[1].strip().split('=')[3].split('failed')[0].strip() - failed_flag = line.split(':')[1].strip().split('=')[4].strip() - retval[ip_address]=[ok_flag, changed_flag, unreachable_flag, failed_flag] - if "PLAY RECAP" in line: - ParseFlag = True - log.append (line) - - # retval['p'] = p.wait() - - print " =================ANSIBLE STDOUT END==============================================\n" - - return retval, log, returncode - -if __name__ == '__main__': - - from multiprocessing import Process, Value, Array, Manager - import time - - nodelist = 'host' - - playbook_file = 'ansible_sleep@0.00.yml' - - - d = Manager().dict() - - p = Process(nodelist=ansible_call, args=('ansible_module_config', playbook_file, nodelist,d, )) - p.start() - - print "Process running" - print d - p.join() - print d diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleSql.py b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleSql.py deleted file mode 100644 index ab58a96c7..000000000 --- a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleSql.py +++ /dev/null @@ -1,322 +0,0 @@ -''' -/*- -* ============LICENSE_START======================================================= -* ONAP : APPC -* ================================================================================ -* Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -* ================================================================================ -* Copyright (C) 2017 Amdocs -* ============================================================================= -* Licensed under the Apache License, Version 2.0 (the "License"); -* you may not use this file except in compliance with the License. -* You may obtain a copy of the License at -* -* http://www.apache.org/licenses/LICENSE-2.0 -* -* Unless required by applicable law or agreed to in writing, software -* distributed under the License is distributed on an "AS IS" BASIS, -* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -* See the License for the specific language governing permissions and -* limitations under the License. -* -* ECOMP is a trademark and service mark of AT&T Intellectual Property. -* ============LICENSE_END========================================================= -*/ -''' - -import pymysql, sys -from os import listdir -from os.path import isfile, join - -class mySql(): - - def __init__(self, myhost, myuser, mypasswd, mydb): - self.con = True - self.error = '' - self.db = None - try: - self.db = pymysql.connect(host=myhost, - user=myuser, - passwd=mypasswd, - db=mydb) - self.cur = self.db.cursor() - except Exception as e: - self.error = e[1] - self.con = False - - def Query (self, myquery, val = None): - results = None - try: - if val: - self.cur.execute(myquery, val) - else: - self.cur.execute(myquery) - self.db.commit() - results = self.cur.fetchall() - except Exception, e: - results = repr(e) - return results - - def Close (self): - if self.db: - self.db.close() - -def loadPlaybook (sqlintf, value, version, ext = '.yml'): - - errorCode = 0 - diag = '' - - # Test if primary key already defined - query = "SELECT name FROM playbook WHERE name='" + value +"'" - results = sqlintf.Query (query) - if len(results) > 0: - pass - else: - query = "INSERT INTO playbook (name) VALUES ('" + value + "')" - results = sqlintf.Query (query) - if len(results) > 0: - errorCode = 1 - diag = results - - # Load playbook - file = open(playbook_path + value + ext, 'r') - load_file = file.read() - - if not errorCode: - sql = "UPDATE playbook SET value=%s, version=%s, type=%s WHERE name=%s" - - results = sqlintf.Query(sql, (load_file, version, ext, value)) - - if len (results) > 0: - # Error loading playbook - errorCode = 1 - diag = results - - return errorCode, diag - -def loadCredentials (sqlintf, hostgroup, hostname, cred): - errorCode = 0 - diag = '' - - # Load credentials - - query = "SELECT hostname,hostgroup FROM inventory WHERE hostname='" + hostname +"'" - results = sqlintf.Query (query) - - if hostname in str (results): - - results_hostgroups = results[0][1] - - if hostgroup in results_hostgroups.split(','): - query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\ - cred +\ - "' WHERE hostname='" + hostname + "'" - else: - - results_hostgroups = results_hostgroups + ',' + hostgroup - - query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\ - cred + "',hostgroup='" + results_hostgroups + \ - "' WHERE hostname='" + hostname + "'" - - results = sqlintf.Query (query) - - else: - - query = "INSERT INTO inventory (hostgroup, hostname, credentials) VALUES ('" + \ - hostgroup + "','" + hostname + "','" + cred + "')" - results = sqlintf.Query (query) - - if len (results) > 0: - # Error loading playbook - errorCode = 1 - diag = results - - return errorCode, diag - - -def readPlaybook (sqlintf, value, version=None): - - errorCode = 0 - diag = '' - - print "***> in AnsibleSql.readPlaybook" - - if not version: - query = "SELECT MAX(version) FROM playbook WHERE name like'" + value + "%'" - print " Query:", query - results = sqlintf.Query (query) - version = results[0][0] - - print " Provided playbook name:", value - print " Used version:", version - - results = [] - if version: - query = "SELECT value,type FROM playbook WHERE name='" + value + "@" + version + "'" - results = sqlintf.Query (query) - - print "Query:", query - print "Results:", results - - if len(results) == 0: - errorCode = 1 - else: - if len(results[0]) == 0: - errorCode = 1 - diag = results[0] - else: - diag = results[0] - - return value, version, errorCode, diag - -def readCredentials (sqlintf, tag): - errorCode = [] - diag = [] - - print "***> in AnsibleSql.readCredential" - - # Load credentials - - for rec in tag: - - # Try hostgroup - query = "SELECT hostgroup, hostname, credentials FROM inventory WHERE hostgroup LIKE '%" + \ - rec +"%'" - query_results = sqlintf.Query (query) - - results = () - for q in query_results: - if rec in q[0].split(','): - l = list(q) - l[0] = rec - q = tuple(l) - results = (q,) + results - - if len(results) == 0: - # Try hostname - query = "SELECT hostgroup, hostname, credentials FROM inventory WHERE hostname='" + \ - rec +"'" - results = sqlintf.Query (query) - - print " Query:", query - print " Results:", len(results), results - - if len(results) == 0: - errorCode = 1 - hostgroup = rec - hostname = rec - credentials = 'ansible_connection=ssh ansible_ssh_user=na ansible_ssh_private_key_file=na\n' - diag.append([hostgroup, hostname, credentials]) - else: - errorCode = 0 - for i in range(len (results)): - for h in results[i][0].split(','): - hostgroup = h - hostname = results[i][1] - credentials = results[i][2] - diag.append([hostgroup, hostname, credentials]) - - return errorCode, diag - - -if __name__ == '__main__': - - ################################################################ - # Change below - ################################################################ - host="localhost" # your host, usually localhost - user="mysql_user_id" # your username - passwd="password_4_mysql_user_id" # your password - db="ansible" # name of the data base - - playbook_path = "/home/ubuntu/RestServerOpenSource/" - inventory = "/home/ubuntu/RestServerOpenSource/Ansible_inventory" - ################################################################ - - onlyfiles = [f for f in listdir(playbook_path) - if isfile(join(playbook_path, f))] - - sqlintf = mySql (host, user, passwd, db) - - # Load playbooks - - print "Loading playbooks" - for file in onlyfiles: - if "yml" in file: - - name = file.split (".yml")[0] - print " Loading:", name - version = name.split("@")[1] - errorCode, diag = loadPlaybook (sqlintf, name, version, '.yml') - if errorCode: - print " Results: Failed - ", diag - else: - print " Results: Success" - - print "\nLoading inventory" - - # Load inventory - - hostgroup = None - inv = {} - file = open(inventory, 'r') - - for line in file: - - if '[' in line and ']' in line: - hostgroup = line.strip().replace('[','').replace(']','') - inv[hostgroup] = {} - elif hostgroup and len(line.strip())>0: - host = line.strip().split(" ")[0] - credentials = line.replace(host,"") - inv[hostgroup][host] = credentials - - file.close() - - for hostgroup in inv: - print " Loading:", hostgroup - hostfqdn = '' - cred = '' - for hostname in inv[hostgroup]: - cred = inv[hostgroup][hostname] - errorCode, diag = loadCredentials (sqlintf, hostgroup, hostname, cred) - if errorCode: - print " Results: Failed - ", diag - else: - print " Results: Success" - - print "\nReading playbook" - - # Read playbook - - if not sqlintf.con: - print "Cannot connect to MySql:", sqlintf.error - sys.exit() - - name = "ansible_sleep" - print "Reading playbook:", name - value, version, errorCode, diag = readPlaybook (sqlintf, name) - if errorCode: - print "Results: Failed - ", diag - else: - print "Results: Success" - print value - print version - print diag - - print "\nReading inventory" - - # Read inventory - - tag = ["your_inventory_test_group_name"] - print "Reading inventory tag:", tag - errorCode, diag = readCredentials (sqlintf, tag) - if errorCode: - print "Results: Failed - ", diag - else: - print "Results: Success" - print diag - - sqlintf.Close() - diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/Ansible_inventory b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/Ansible_inventory deleted file mode 100644 index 69df84ff9..000000000 --- a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/Ansible_inventory +++ /dev/null @@ -1,27 +0,0 @@ -# /*- -# * ============LICENSE_START======================================================= -# * ONAP : APPC -# * ================================================================================ -# * Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -# * ================================================================================ -# * Copyright (C) 2017 Amdocs -# * ============================================================================= -# * Licensed under the Apache License, Version 2.0 (the "License"); -# * you may not use this file except in compliance with the License. -# * You may obtain a copy of the License at -# * -# * http://www.apache.org/licenses/LICENSE-2.0 -# * -# * Unless required by applicable law or agreed to in writing, software -# * distributed under the License is distributed on an "AS IS" BASIS, -# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# * See the License for the specific language governing permissions and -# * limitations under the License. -# * -# * ECOMP is a trademark and service mark of AT&T Intellectual Property. -# * ============LICENSE_END========================================================= -# */ - -[host] -localhost ansible_connection=local - diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/LoadAnsibleMySql.py b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/LoadAnsibleMySql.py deleted file mode 100644 index 0a1c78a6f..000000000 --- a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/LoadAnsibleMySql.py +++ /dev/null @@ -1,207 +0,0 @@ -''' -/*- -* ============LICENSE_START======================================================= -* ONAP : APPC -* ================================================================================ -* Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -* ================================================================================ -* Copyright (C) 2017 Amdocs -* ============================================================================= -* Licensed under the Apache License, Version 2.0 (the "License"); -* you may not use this file except in compliance with the License. -* You may obtain a copy of the License at -* -* http://www.apache.org/licenses/LICENSE-2.0 -* -* Unless required by applicable law or agreed to in writing, software -* distributed under the License is distributed on an "AS IS" BASIS, -* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -* See the License for the specific language governing permissions and -* limitations under the License. -* -* ECOMP is a trademark and service mark of AT&T Intellectual Property. -* ============LICENSE_END========================================================= -*/ -''' - -#!/usr/bin/python -import pymysql -from os import listdir -from os.path import isfile, join - -class mySql(): - - def __init__(self, myhost, myuser, mypasswd, mydb): - self.db = pymysql.connect(host=myhost, - user=myuser, - passwd=mypasswd, - db=mydb) - self.cur = self.db.cursor() - - def Query (self, myquery, val = None): - results = None - error = None - try: - if val: - self.cur.execute(myquery, val) - else: - self.cur.execute(myquery) - self.db.commit() - results = self.cur.fetchall() - except Exception, e: - error = str (e) - return results, error - - def Close (self): - self.db.close() - -def loadPlaybook (value, version, ext = '.yml'): - - errorCode = 0 - diag = '' - - # Test if primary key already defined - query = "SELECT name FROM playbook WHERE name='" + value +"'" - results, error = sqlintf.Query (query) - if results: - # print "Primary key already defined: Updating playbook" - pass - else: - # print "Primary key not defined: Insert new playbook" - query = "INSERT INTO playbook (name) VALUES ('" + value + "')" - results, error = sqlintf.Query (query) - if error: - errorCode = 1 - diag = error - - # Load playbook - file = open(playbook_path + value + ext, 'r') - load_file = file.read() - - # Load playbook - - if not errorCode: - sql = "UPDATE playbook SET value=%s, version=%s, type=%s WHERE name=%s" - - results, error = sqlintf.Query(sql, (load_file, version, ext, value)) - - if error: - # Error loading playbook - errorCode = 1 - diag = error - - return errorCode, diag - -def loadCredentials (hostgroup, hostname, cred): - errorCode = 0 - diag = '' - - # Load credentials - - query = "SELECT hostname,hostgroup FROM inventory WHERE hostname='" + hostname +"'" - results = sqlintf.Query (query) - - print '==>', results - - if hostname in str(results): - - results_hostgroups = results[0][0][1] - - # print "Record already defined: Updating inventory" - if hostgroup in results_hostgroups.split(','): - query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\ - cred +\ - "' WHERE hostname='" + hostname + "'" - else: - - results_hostgroups = results_hostgroups + ',' + hostgroup - - query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\ - cred + "',hostgroup='" + results_hostgroups + \ - "' WHERE hostname='" + hostname + "'" - - results, error = sqlintf.Query (query) - - else: - - query = "INSERT INTO inventory (hostgroup, hostname, credentials) VALUES ('" + \ - hostgroup + "','" + hostname + "','" + cred + "')" - results, error = sqlintf.Query (query) - - if error: - # Error loading credentials - errorCode = 1 - diag = results - - return errorCode, diag - - -if __name__ == '__main__': - - ################################################################ - # Change below - ################################################################ - host="localhost" # your host, usually localhost - user="mysql_user_id" # your username - passwd="password_4_mysql_user_id" # your password - db="ansible" # name of the data base - - playbook_path = "/home/ubuntu/RestServerOpenSource/" - inventory = "/home/ubuntu/RestServerOpenSource/Ansible_inventory" - ################################################################ - - onlyfiles = [f for f in listdir(playbook_path) - if isfile(join(playbook_path, f))] - - sqlintf = mySql (host, user, passwd, db) - - # Load playbooks - print "Loading playbooks" - for file in onlyfiles: - if "yml" in file: - name = file.split (".yml")[0] - print " Loading:", name - version = name.split("@")[1] - errorCode, diag = loadPlaybook (name, version) - if errorCode: - print " Results: Failed - ", diag - else: - print " Results: Success" - if "tar.gz" in file: - name = file.split (".tar.gz")[0] - print " Loading:", name - version = name.split("@")[1] - errorCode, diag = loadPlaybook (name, version, ".tar.gz") - - print "\nLoading inventory" - - # Load inventory - hostgroup = None - inv = {} - file = open(inventory, 'r') - - for line in file: - - if '[' in line and ']' in line: - hostgroup = line.strip().replace('[','').replace(']','') - inv[hostgroup] = {} - elif hostgroup and len(line.strip())>0: - host = line.strip().split(" ")[0] - credentials = line.replace(host,"") - inv[hostgroup][host] = credentials - - file.close() - - for hostgroup in inv: - print " Loading:", hostgroup - hostfqdn = '' - cred = '' - for hostname in inv[hostgroup]: - cred = inv[hostgroup][hostname] - errorCode, diag = loadCredentials (hostgroup, hostname, cred) - if errorCode: - print " Results: Failed - ", diag - else: - print " Results: Success" - - sqlintf.Close() diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/README b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/README index c858361ea..a7a1c20a0 100644 --- a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/README +++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/README @@ -25,79 +25,7 @@ ''' ============ -INSTALLATION: +NOTE: ============ -Python: -------- -sudo apt-get install python2.7 -sudo apt-get install python-pip -pip install PyMySQL -pip install requests - -Ansible: --------- -sudo apt-get install software-properties-common -sudo apt-add-repository ppa:ansible/ansible -sudo apt-get update -sudo apt-get install ansible - -SQL db: -------- - -sudo apt-get install mysql-server - -Set root passwd during installation (i.e. password_4_mysql_user_id) - -sudo service mysql restart - -Setup mysql: ------------- - -mysql -u [username]-p -mysql -uroot -p - -Create user (i.e. id=mysql_user_id psswd=password_4_mysql_user_id) - CREATE USER 'appc'@'%' IDENTIFIED BY 'password_4_mysql_user_id'; - GRANT ALL PRIVILEGES ON *.* TO 'mysql_user_id'@'%'; - SET PASSWORD FOR 'mysql_user_id'@'%'=PASSWORD('password_4_mysql_user_id'); - -Create schema - CREATE SCHEMA ansible; - show databases; - use ansible; - CREATE TABLE playbook (name VARCHAR(45) NOT NULL, value BLOB, type VARCHAR(60), version VARCHAR(60), PRIMARY KEY (name)); - show tables; - CREATE TABLE inventory (hostname VARCHAR(45) NOT NULL, hostgroup VARCHAR(45), credentials VARCHAR(500), PRIMARY KEY (hostname)); - SHOW COLUMNS FROM playbook; - SHOW COLUMNS FROM inventory; - GRANT ALL PRIVILEGES ON *.* TO 'mysql_user_id'@'%' IDENTIFIED BY 'password_4_mysql_user_id' WITH GRANT OPTION; - GRANT ALL PRIVILEGES ON *.* TO 'ansible'@'%' IDENTIFIED BY 'ansible_agent' WITH GRANT OPTION; - FLUSH PRIVILEGES; - -Load db: --------- - -python LoadAnsibleMySql.py - -============= -CODE TESTING: -============= -1. Start RestServer: python RestServer.py - -2. Try curl commands (case no secured REST: http & no authentication): - -- Request to execute playbook: -curl -H "Content-type: application/json" -X POST -d '{"Id": "10", "PlaybookName": "ansible_sleep", "NodeList": ["host"], "Timeout": "60", "EnvParameters": {"Sleep": "10"}}' http://0.0.0.0:8000/Dispatch - -response: {"ExpectedDuration": "60sec", "StatusMessage": "PENDING", "StatusCode": 100} - -- Get results (blocked until test finished): -curl --cacert ~/SshKey/fusion_eric-vm_cert.pem --user "appc:abc123" -H "Content-type: application/json" -X GET "http://0.0.0.0:8000/Dispatch/?Id=10&Type=GetResult" - -response: {"Results": {"localhost": {"GroupName": "host", "StatusMessage": "SUCCESS", "StatusCode": 200}}, "PlaybookName": "ansible_sleep", "Version": "0.00", "Duration": "11.261794", "StatusMessage": "FINISHED", "StatusCode": 200} - -- Delete playbook execution information -curl --cacert ~/SshKey/fusion_eric-vm_cert.pem --user "appc:abc123" -H "Content-type: application/json" -X DELETE http://0.0.0.0:8000/Dispatch/?Id=10 - -response: {"StatusMessage": "PLAYBOOK EXECUTION RECORDS DELETED", "StatusCode": 200} +the files have been moved to CCSDK/distribution/ansible-server Repo diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer.py b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer.py deleted file mode 100644 index 4758a9b9b..000000000 --- a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer.py +++ /dev/null @@ -1,948 +0,0 @@ -''' -/*- -* ============LICENSE_START======================================================= -* ONAP : APPC -* ================================================================================ -* Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -* ================================================================================ -* Copyright (C) 2017 Amdocs -* ============================================================================= -* Licensed under the Apache License, Version 2.0 (the "License"); -* you may not use this file except in compliance with the License. -* You may obtain a copy of the License at -* -* http://www.apache.org/licenses/LICENSE-2.0 -* -* Unless required by applicable law or agreed to in writing, software -* distributed under the License is distributed on an "AS IS" BASIS, -* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -* See the License for the specific language governing permissions and -* limitations under the License. -* -* ECOMP is a trademark and service mark of AT&T Intellectual Property. -* ============LICENSE_END========================================================= -*/ -''' - -import time, datetime, json, os, sys, subprocess, re -import uuid -import tarfile -import shutil - -import requests - -import cherrypy -from cherrypy.lib.httputil import parse_query_string -from cherrypy.lib import auth_basic - -from multiprocessing import Process, Manager - -from AnsibleModule import ansibleSysCall - -import AnsibleSql -from AnsibleSql import readPlaybook, readCredentials - -from os import listdir -from os.path import isfile, join - -TestRecord = Manager().dict() -ActiveProcess = {} - -def sys_call (cmd): - p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - output = p.stdout.readlines() - retval = p.wait() - if len (output) > 0: - for i in range(len(output)): - output[i] = output[i].strip() - return retval, output - -def callback (Id, Result, Output, Log, returncode): - - print "***> in RestServer.callback" - - if Id in TestRecord: - time_now = datetime.datetime.utcnow() - delta_time = (time_now - TestRecord[Id]['Time']).total_seconds() - Result['PlaybookName'] = TestRecord[Id]['PlaybookName'] - Result['Version'] = TestRecord[Id]['Version'] - if returncode == 137: - Result['StatusCode'] = 500 - Result['StatusMessage'] = "TERMINATED" - else: - Result['StatusCode'] = 200 - Result['StatusMessage'] = "FINISHED" - - # Need to update the whole data structure for key=Id otherwise Manager is not updated - TestRecord[Id] = {'PlaybookName': TestRecord[Id]['PlaybookName'], - 'LCM': TestRecord[Id]['LCM'], - 'Version': TestRecord[Id]['Version'], - 'NodeList': TestRecord[Id]['NodeList'], - 'HostGroupList': TestRecord[Id]['HostGroupList'], - 'HostNameList': TestRecord[Id]['HostNameList'], - 'Time': TestRecord[Id]['Time'], - 'Timeout': TestRecord[Id]['Timeout'], - 'Duration': str(delta_time), - 'EnvParameters': TestRecord[Id]['EnvParameters'], - 'LocalParameters': TestRecord[Id]['LocalParameters'], - 'FileParameters': TestRecord[Id]['FileParameters'], - 'CallBack': TestRecord[Id]['CallBack'], - 'Result': Result, - 'Log': Log, - 'Output': Output, - 'Path': TestRecord[Id]['Path'], - 'Mandatory': TestRecord[Id]['Path']} - - if not TestRecord[Id]['CallBack'] == None: - - # Posting results to callback server - - data = {"StatusCode": 200, - "StatusMessage": "FINISHED", - "PlaybookName": TestRecord[Id]["PlaybookName"], - "Version": TestRecord[Id]["Version"], - "Duration": TestRecord[Id]["Duration"], - "Results": TestRecord[Id]['Result']['Results']} - - if not TestRecord[Id]['Output']['Output'] == {}: - for key in data["Results"]: - if key in TestRecord[Id]['Output']['Output']: - data["Results"][key]["Output"] = TestRecord[Id]['Output']['Output'][key] - - print " Posting to", TestRecord[Id]['CallBack'] - - s = requests.Session() - r = s.post(TestRecord[Id]['CallBack'], data = json.dumps(data), - headers = {'content-type': 'application/json'}) - print " Response", r.status_code, r.text - -def RunAnsible_Playbook (callback, Id, Inventory, Playbook, NodeList, TestRecord, - Path, ArchiveFlag): - - print "***> in RestServer.RunAnsible_Playbook" - - # Run test in playbook for given target - Result = '' - - retval, log, returncode = ansibleSysCall (Inventory, Playbook, NodeList, - TestRecord[Id]['Mandatory'], - TestRecord[Id]['EnvParameters'], - TestRecord[Id]['LocalParameters'], - TestRecord[Id]['LCM'], - TestRecord[Id]['Timeout']) - - - print " returncode:", returncode - print " retval: ", retval - print " log: ", log - - Log = ''.join(log) - Output = {'Output': {}} - - onlyfiles = [f for f in listdir(Path) - if isfile(join(Path, f))] - - for file in onlyfiles: - if "results.txt" in file: - f = open(Path + "/" + file, "r") - key = file.split("_")[0] - Output['Output'][key] = f.read() - f.close() - - Result = {'Results': {}} - if 'could not be found' in Log: - Result['Results'] = {"StatusCode": 101, - "StatusMessage": "PLAYBOOK NOT FOUND"} - if returncode == 137: - Result['Results'] = {"StatusCode": 500, - "StatusMessage": "TERMINATED"} - - elif TestRecord[Id]['NodeList'] == []: - - host_index = None - - if 'TargetNode' in TestRecord[Id]['EnvParameters']: - targetlist = TestRecord[Id]['EnvParameters']['TargetNode'].split(' ') - else: - targetlist = ["localhost"] - - for key in retval: - for i in range (len(targetlist)): - if key in targetlist[i]: - host_index = i - - if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \ - int(retval[key][3]) == 0: - - if host_index: - Result['Results'][targetlist[host_index]] = \ - {"GroupName": 'na', "StatusCode": 200, \ - "StatusMessage": "SUCCESS"} - else: - Result['Results'][key] = \ - {"GroupName": 'na', "StatusCode": 200, \ - "StatusMessage": "SUCCESS"} - elif int(retval[key][2]) > 0: - if host_index: - Result['Results'][targetlist[host_index]] = \ - {"GroupName": 'na', "StatusCode": 400, \ - "StatusMessage": "NOT REACHABLE"} - else: - Result['Results'][key] = \ - {"GroupName": 'na', "StatusCode": 400, \ - "StatusMessage": "NOT REACHABLE"} - elif int(retval[key][3]) > 0: - if host_index: - Result['Results'][targetlist[host_index]] = \ - {"GroupName": 'na', "StatusCode": 400, \ - "StatusMessage": "FAILURE"} - else: - Result['Results'][key] = \ - {"GroupName": 'na', "StatusCode": 400, \ - "StatusMessage": "FAILURE"} - else: - - for key in retval: - - if len(TestRecord[Id]['HostNameList']) > 0: - - host_index = [] - for i in range (len(TestRecord[Id]['HostNameList'])): - if key in TestRecord[Id]['HostNameList'][i]: - host_index.append(i) - - if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \ - int(retval[key][3]) == 0: - - if len(host_index) > 0: - Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \ - {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]], - "StatusCode": 200, "StatusMessage": "SUCCESS"} - - for i in range (1, len(host_index)): - Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\ - "," + TestRecord[Id]['HostGroupList'][host_index[i]] - else: - Result['Results'][key] = \ - {"GroupName": key, - "StatusCode": 200, "StatusMessage": "SUCCESS"} - - elif int(retval[key][2]) > 0: - - if len(host_index) > 0: - Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \ - {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]], - "StatusCode": 400, "StatusMessage": "NOT REACHABLE"} - - for i in range (1, len(host_index)): - Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\ - "," + TestRecord[Id]['HostGroupList'][host_index[i]] - else: - Result['Results'][key] = \ - {"GroupName": key, - "StatusCode": 200, "StatusMessage": "NOT REACHABLE"} - - elif int(retval[key][3]) > 0: - - if len(host_index) > 0: - Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \ - {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]], - "StatusCode": 400, "StatusMessage": "FAILURE"} - - for i in range (1, len(host_index)): - Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\ - "," + TestRecord[Id]['HostGroupList'][host_index[i]] - else: - Result['Results'][key] = \ - {"GroupName": key, - "StatusCode": 200, "StatusMessage": "FAILURE"} - else: - host_index = None - for i in range (len(TestRecord[Id]['NodeList'])): - if key in TestRecord[Id]['NodeList'][i]: - host_index = i - - if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \ - int(retval[key][3]) == 0: - Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \ - {"GroupName": 'na', "StatusCode": 200, \ - "StatusMessage": "SUCCESS"} - elif int(retval[key][2]) > 0: - Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \ - {"GroupName": 'na', "StatusCode": 400, "StatusMessage": "NOT REACHABLE"} - elif int(retval[key][3]) > 0: - Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \ - {"GroupName": 'na', "StatusCode": 400, "StatusMessage": "FAILURE"} - - callback (Id, Result, Output, Log, returncode) - -class TestManager (object): - - @cherrypy.expose - @cherrypy.tools.json_out() - @cherrypy.tools.json_in() - @cherrypy.tools.allow(methods=['POST', 'GET', 'DELETE']) - - def Dispatch(self, **kwargs): - - # Let cherrypy error handler deal with malformed requests - # No need for explicit error handler, we use default ones - - time_now = datetime.datetime.utcnow() - - # Erase old test results (2x timeout) - if TestRecord: - for key in TestRecord.copy(): - delta_time = (time_now - TestRecord[key]['Time']).seconds - if delta_time > 2*TestRecord[key]['Timeout']: - print "Deleted history for test", key - if os.path.exists(TestRecord[key]['Path']): - shutil.rmtree (TestRecord[key]['Path']) - del TestRecord[key] - - print "***> in RestServer.Dispatch:", cherrypy.request.method - - HomeDir = os.path.dirname(os.path.realpath("~/")) - - if 'POST' in cherrypy.request.method: - - input_json = cherrypy.request.json - print " Payload: ", input_json - - if 'Id' in input_json and 'PlaybookName' in input_json: - - if True: - - if not input_json['Id'] in TestRecord: - - Id = input_json['Id'] - PlaybookName = input_json['PlaybookName'] - - version = None - if 'Version' in input_json: - version = input_json['Version'] - - AnsibleInvFail = True - AnsiblePlaybookFail = True - - MySqlConFail = True - MySqlCause = '' - - LocalNodeList = None - - str_uuid = str (uuid.uuid4()) - - LCM = PlaybookName.split(".")[0].split('_')[-1] - PlaybookDir = HomeDir + "/" + ansible_temp + "/" + \ - PlaybookName.split(".")[0] + "_" + str_uuid - AnsibleInv = LCM + "_" + "inventory" - ArchiveFlag = False - - print " LCM: ", LCM - print " PlaybookDir: ", ansible_temp + PlaybookDir.split(ansible_temp)[1] - print " AnsibleInv: ", AnsibleInv - print " ansible_temp: ", ansible_temp - - if not os.path.exists(HomeDir + "/" + ansible_temp): - os.makedirs(HomeDir + "/" + ansible_temp) - - os.mkdir(PlaybookDir) - - # Process inventory file for target - - hostgrouplist = [] - hostnamelist = [] - - NodeList = [] - if 'NodeList' in input_json: - NodeList = input_json['NodeList'] - - print " NodeList: ", NodeList - - if NodeList == []: - # By default set to local host - AnsibleInvFail = False - - LocalNodeList = "host" - LocalCredentials = "localhost ansible_connection=local" - f = open(PlaybookDir + "/" + AnsibleInv, "w") - f.write("[" + LocalNodeList + "]\n") - f.write(LocalCredentials) - f.close() - - else: - - if from_files: - - # Get credentials from file - - data_inventory_orig = {} - data_inventory_target = {} - curr_group = None - - print "***>", ansible_path + "/" + ansible_inv - f = open(ansible_path + "/" + ansible_inv, "r") - for line in f: - line = line.rstrip() - - if len(line)> 0: - if '#' not in line: - if "[" in line and "]" in line: - data_inventory_orig[line] = [] - curr_group = line - else: - data_inventory_orig[curr_group].append(line) - f.close() - - for node in NodeList: - Fail = True - if "[" + node + "]" in data_inventory_orig: - if not "[" + node + "]" in data_inventory_target: - - print "RESET", "[" + node + "]" - data_inventory_target["[" + node + "]"] = [] - else: - print "OK", "[" + node + "]" - Fail = False - for cred in data_inventory_orig["[" + node + "]"]: - data_inventory_target["[" + node + "]"].append(cred) - - else: - for key in data_inventory_orig: - if node in " ".join(data_inventory_orig[key]): - if not key in data_inventory_target: - data_inventory_target[key] = [] - for cred in data_inventory_orig[key]: - if node in cred: - data_inventory_target[key].append(cred) - Fail = False - - if Fail: - data_inventory_target["["+node+"]"] = \ - [node + " ansible_connection=ssh ansible_ssh_user=na ansible_ssh_private_key_file=na"] - - AnsibleInvFail = False - - f = open(PlaybookDir + "/" + AnsibleInv, "w") - for key in data_inventory_target: - f.write(key + "\n") - for rec in data_inventory_target[key]: - hostgrouplist.append(key.replace("[", '').replace("]", '')) - hostnamelist.append(rec.split(' ')[0]) - f.write(rec + "\n") - f.close() - - else: - - # Get credentials from mySQL - - sqlintf = AnsibleSql.mySql (host, user, passwd, - db) - if sqlintf.con: - MySqlConFail = False - errorCode, diag = readCredentials (sqlintf, - NodeList) - - print errorCode, diag - if len (diag) > 0: - f = open(PlaybookDir + "/" + AnsibleInv, - "w") - AnsibleInvFail = False - # [hostgroup, hostname, credentials] - for i in range(len(diag)): - f.write('[' + diag[i][0] + ']' + "\n") - f.write(diag[i][1]+ " " + diag[i][2] + "\n\n") - hostgrouplist.append(diag[i][0]) - hostnamelist.append(diag[i][1]) - f.close() - else: - MySqlConFailCause = sqlintf.error - sqlintf.Close() - - timeout = timeout_seconds - if 'Timeout' in input_json: - timeout = int (input_json['Timeout']) - - EnvParam = {} - if 'EnvParameters' in input_json: - EnvParam = input_json['EnvParameters'] - - LocalParam = {} - if 'LocalParameters' in input_json: - LocalParam = input_json['LocalParameters'] - - FileParam = {} - if 'FileParameters' in input_json: - FileParam = input_json['FileParameters'] - - callback_flag = None - if 'CallBack' in input_json: - callback_flag = input_json['CallBack'] - - TestRecord[Id] = {'PlaybookName': PlaybookName, - 'LCM': LCM, - 'Version': version, - 'NodeList': NodeList, - 'HostGroupList': hostgrouplist, - 'HostNameList': hostnamelist, - 'Time': time_now, - 'Duration': timeout, - 'Timeout': timeout, - 'EnvParameters': EnvParam, - 'LocalParameters': LocalParam, - 'FileParameters': FileParam, - 'CallBack': callback_flag, - 'Result': {"StatusCode": 100, - "StatusMessage": 'PENDING', - "ExpectedDuration": str(timeout) + "sec"}, - 'Log': '', - 'Output': {}, - 'Path': PlaybookDir, - 'Mandatory': None} - - # Write files - - if not TestRecord[Id]['FileParameters'] == {}: - for key in TestRecord[Id]['FileParameters']: - filename = key - filecontent = TestRecord[Id]['FileParameters'][key] - f = open(PlaybookDir + "/" + filename, "w") - f.write(filecontent) - f.close() - - - # Process playbook - - if from_files: - - # Get playbooks from files - - MySqlConFail = False - - version = None - target_PlaybookName = None - - if '@' in PlaybookName: - version = PlaybookName.split("@")[1] - version = version.replace('.yml','') - version = version.replace('.tar.gz','') - - onlyfiles = [f for f in listdir(ansible_path) - if isfile(join(ansible_path, f))] - - version_max = '0.00' - version_target = '' - - for file in onlyfiles: - if LCM in file: - temp_version = file.split("@")[1] - temp_version = temp_version.replace('.yml','') - temp_version = temp_version.replace('.tar.gz','') - if version_max < temp_version: - version_max = temp_version - - if not version == None: - if version in PlaybookName: - version_target = version - target_PlaybookName = file - - if target_PlaybookName == None: - for file in onlyfiles: - if LCM in file and version_max in file: - target_PlaybookName = file - version_target = version_max - - if target_PlaybookName: - AnsiblePlaybookFail = False - readversion = version_target - src = ansible_path + "/" + target_PlaybookName - if ".tar.gz" in target_PlaybookName: - dest = PlaybookDir + "/" + LCM + ".tar.gz" - shutil.copy2(src, dest) - retcode = subprocess.call(['tar', '-xvzf', - dest, "-C", PlaybookDir]) - ArchiveFlag = True - else: - dest = PlaybookDir + "/" + LCM + ".yml" - shutil.copy2(src, dest) - - else: - # Get playbooks from mySQL - - sqlintf = AnsibleSql.mySql (host, user, passwd, db) - if sqlintf.con: - MySqlConFail = False - - name, readversion, AnsiblePlaybookFail, diag = \ - readPlaybook (sqlintf, PlaybookName.split(".")[0], - version) - - if not AnsiblePlaybookFail: - - f = open(PlaybookDir + "/" + LCM + diag[1], "w") - f.write(diag[0]) - f.close() - - if ".tar.gz" in diag[1]: - retcode = subprocess.call(['tar', '-xvzf', - PlaybookDir + "/" + LCM + diag[1], "-C", PlaybookDir]) - f.close() - ArchiveFlag = True - else: - MySqlConFailCause = sqlintf.error - sqlintf.Close() - - if MySqlConFail: - if os.path.exists(PlaybookDir): - shutil.rmtree (PlaybookDir) - del TestRecord[Id] - return {"StatusCode": 101, - "StatusMessage": "CANNOT CONNECT TO MYSQL: " \ - + MySqlConFailCause} - elif AnsiblePlaybookFail: - if os.path.exists(PlaybookDir): - shutil.rmtree (PlaybookDir) - del TestRecord[Id] - return {"StatusCode": 101, - "StatusMessage": "PLAYBOOK NOT FOUND"} - elif AnsibleInvFail: - if os.path.exists(PlaybookDir): - shutil.rmtree (PlaybookDir) - del TestRecord[Id] - return {"StatusCode": 101, - "StatusMessage": "NODE LIST CREDENTIALS NOT FOUND"} - else: - - # Test EnvParameters - playbook_path = None - if ArchiveFlag: - for dName, sdName, fList in os.walk(PlaybookDir): - if LCM+".yml" in fList: - playbook_path = dName - else: - playbook_path = PlaybookDir - - # Store local vars - if not os.path.exists(playbook_path + "/vars"): - os.mkdir(playbook_path + "/vars") - if not os.path.isfile(playbook_path + "/vars/defaults.yml"): - os.mknod(playbook_path + "/vars/defaults.yml") - - for key in TestRecord[Id]['LocalParameters']: - host_index = [] - for i in range(len(TestRecord[Id]['HostNameList'])): - if key in TestRecord[Id]['HostNameList'][i]: - host_index.append(i) - if len(host_index) == 0: - for i in range(len(TestRecord[Id]['HostGroupList'])): - if key in TestRecord[Id]['HostGroupList'][i]: - host_index.append(i) - if len(host_index) > 0: - for i in range(len(host_index)): - f = open(playbook_path + "/vars/" + - TestRecord[Id]['HostNameList'][host_index[i]] + - ".yml", "a") - for param in TestRecord[Id]['LocalParameters'][key]: - f.write(param + ": " + - str (TestRecord[Id]['LocalParameters'][key][param]) + - "\n") - f.close() - - # Get mandatory parameters from playbook - Mandatory = [] - with open(playbook_path + "/" + LCM + ".yml") as origin_file: - for line in origin_file: - if "Mandatory" in line: - temp = line.split(":")[1].strip().replace(' ', '') - if len(temp) > 0: - Mandatory = temp.split(",") - - TestRecord[Id] = {'PlaybookName': TestRecord[Id]['PlaybookName'], - 'LCM': TestRecord[Id]['LCM'], - 'Version': readversion, - 'NodeList': TestRecord[Id]['NodeList'], - 'HostGroupList': TestRecord[Id]['HostGroupList'], - 'HostNameList': TestRecord[Id]['HostNameList'], - 'Time': TestRecord[Id]['Time'], - 'Timeout': TestRecord[Id]['Timeout'], - 'Duration': TestRecord[Id]['Duration'], - 'EnvParameters': TestRecord[Id]['EnvParameters'], - 'LocalParameters': TestRecord[Id]['LocalParameters'], - 'FileParameters': TestRecord[Id]['FileParameters'], - 'CallBack': TestRecord[Id]['CallBack'], - 'Result': TestRecord[Id]['Result'], - 'Log': TestRecord[Id]['Log'], - 'Output': TestRecord[Id]['Output'], - 'Path': TestRecord[Id]['Path'], - 'Mandatory': Mandatory} - - TestKey = False - - if Mandatory: - for val in Mandatory: - if EnvParam: - if val in EnvParam: - TestKey = True - else: - if LocalParam: - for key in TestRecord[Id]['NodeList']: - if key in LocalParam: - if val in LocalParam[key]: - TestKey = True - else: - if LocalParam: - for key in TestRecord[Id]['NodeList']: - if key in LocalParam: - if val in LocalParam[key]: - TestKey = True - - if not TestKey: - if os.path.exists(PlaybookDir): - shutil.rmtree (PlaybookDir) - del TestRecord[Id] - return {"StatusCode": 101, - "StatusMessage": "MISSING MANDATORY PARAMETER: " + \ - " ".join(str(x) for x in Mandatory)} - - - # Cannot use thread because ansible module uses - # signals which are only supported in main thread. - # So use multiprocess with shared object - - p = Process(target = RunAnsible_Playbook, - args = (callback, Id, PlaybookDir + "/" + AnsibleInv, - playbook_path + "/" + LCM + ".yml", - NodeList, TestRecord, PlaybookDir, - ArchiveFlag)) - p.start() - ActiveProcess[Id] = p - return TestRecord[Id]['Result'] - else: - return {"StatusCode": 101, "StatusMessage": "TEST ID ALREADY DEFINED"} - - else: - return {"StatusCode": 500, "StatusMessage": "REQUEST MUST INCLUDE: NODELIST"} - - else: - return {"StatusCode": 500, "StatusMessage": "JSON OBJECT MUST INCLUDE: ID, PLAYBOOKNAME"} - - elif 'GET' in cherrypy.request.method: - - input_data = parse_query_string(cherrypy.request.query_string) - - print "***> in RestServer.GET" - print " Payload: ", input_data, input_data['Type'] - - if 'Id' in input_data and 'Type' in input_data: - if not ('GetResult' in input_data['Type'] or 'GetOutput' in input_data['Type'] or 'GetLog' in input_data['Type']): - return {"StatusCode": 500, "StatusMessage": "RESULTS TYPE UNDEFINED"} - if input_data['Id'] in TestRecord: - - if 'GetResult' in input_data['Type']: - - print "Result:", TestRecord[input_data['Id']]['Result'] - - if 'StatusMessage' in TestRecord[input_data['Id']]['Result'] and getresults_block: - - print "*** Request blocked", input_data['Id'] - - while ActiveProcess[input_data['Id']].is_alive(): - time.sleep(5) - - print "*** Request released ", input_data['Id'] - - print TestRecord[input_data['Id']]['Result'] - if TestRecord[input_data['Id']]['Result']['StatusCode'] == 500: - out_obj = TestRecord[input_data['Id']]['Result']['Results'] - else: - out_obj = {"StatusCode": 200, - "StatusMessage": "FINISHED", - "PlaybookName": TestRecord[input_data['Id']]["PlaybookName"], - "Version": TestRecord[input_data['Id']]["Version"], - "Duration": TestRecord[input_data['Id']]["Duration"], - "Results": TestRecord[input_data['Id']]['Result']['Results']} - if not TestRecord[input_data['Id']]['Output']['Output'] == {}: - for key in out_obj["Results"]: - if key in TestRecord[input_data['Id']]['Output']['Output']: - out_obj["Results"][key]["Output"] = TestRecord[input_data['Id']]['Output']['Output'][key] - - return out_obj - - elif 'GetOutput' in input_data['Type']: - - if TestRecord[input_data['Id']]['Output'] == {} and \ - getresults_block: - - print "*** Request blocked", input_data['Id'] - - while TestRecord[input_data['Id']]['Output'] == {} \ - or 'StatusMessage' in TestRecord[input_data['Id']]['Result']: - time.sleep(5) - - print "*** Request released ", input_data['Id'] - - print "Output:", TestRecord[input_data['Id']]['Output'] - return {"Output": TestRecord[input_data['Id']]['Output']['Output']} - else: - # GetLog - - if TestRecord[input_data['Id']]['Log'] == '' and \ - getresults_block: - - print "*** Request blocked", input_data['Id'] - - while TestRecord[input_data['Id']]['Log'] == '' \ - or 'StatusMessage' in TestRecord[input_data['Id']]['Result']: - time.sleep(5) - - print "*** Request released ", input_data['Id'] - - print "Log:", TestRecord[input_data['Id']]['Log'] - return {"Log": TestRecord[input_data['Id']]['Log']} - else: - return {"StatusCode": 500, "StatusMessage": "TEST ID UNDEFINED"} - else: - return {"StatusCode": 500, "StatusMessage": "MALFORMED REQUEST"} - elif 'DELETE' in cherrypy.request.method: - input_data = parse_query_string(cherrypy.request.query_string) - - print "***> in RestServer.DELETE" - print " Payload: ", input_data - - if input_data['Id'] in TestRecord: - if not 'PENDING' in TestRecord[input_data['Id']]['Result']: - print " Path:", TestRecord[input_data['Id']]['Path'] - if os.path.exists(TestRecord[input_data['Id']]['Path']): - shutil.rmtree (TestRecord[input_data['Id']]['Path']) - TestRecord.pop (input_data['Id']) - if input_data['Id'] in ActiveProcess: - ActiveProcess.pop (input_data['Id']) - - return {"StatusCode": 200, "StatusMessage": "PLAYBOOK EXECUTION RECORDS DELETED"} - else: - return {"StatusCode": 200, "StatusMessage": "PENDING"} - else: - return {"StatusCode": 500, "StatusMessage": "TEST ID UNDEFINED"} - - -if __name__ == '__main__': - - # Read configuration - - config_file_path = "RestServer_config" - - if not os.path.exists(config_file_path): - print '[INFO] The config file does not exist' - sys.exit(0) - - ip = 'na' - port = 'na' - tls = False - auth = False - pub = 'na' - id = 'na' - priv = 'na' - psswd = 'na' - timeout_seconds = 'na' - ansible_path = 'na' - ansible_inv = 'na' - ansible_temp = 'na' - host = 'na' - user = 'na' - passwd = 'na' - db = 'na' - getresults_block = False - from_files = False - - file = open(config_file_path, 'r') - for line in file.readlines(): - if '#' not in line: - if 'ip:' in line: - ip = line.split(':')[1].strip() - elif 'port:' in line: - port = line.split(':')[1].strip() - elif 'tls:' in line: - tls = 'YES' in line.split(':')[1].strip().upper() - elif 'auth:' in line: - auth = 'YES' in line.split(':')[1].strip().upper() - if tls and 'priv:' in line: - priv = line.split(':')[1].strip() - if tls and 'pub:' in line: - pub = line.split(':')[1].strip() - if auth and 'id:' in line: - id = line.split(':')[1].strip() - if auth and 'psswd:' in line: - psswd = line.split(':')[1].strip() - if 'timeout_seconds' in line: - timeout_seconds = int (line.split(':')[1].strip()) - if 'ansible_path' in line: - ansible_path = line.split(':')[1].strip() - if 'ansible_inv' in line: - ansible_inv = line.split(':')[1].strip() - if not os.path.exists(ansible_path + "/" + ansible_inv): - print '[INFO] The ansible_inv file does not exist' - sys.exit(0) - if 'ansible_temp' in line: - ansible_temp = line.split(':')[1].strip() - if 'host' in line: - host = line.split(':')[1].strip() - if 'user' in line: - user = line.split(':')[1].strip() - if 'passwd' in line: - passwd = line.split(':')[1].strip() - if 'db' in line: - db = line.split(':')[1].strip() - if 'getresults_block' in line: - getresults_block = 'YES' in line.split(':')[1].strip().upper() - if 'from_files' in line: - from_files = 'YES' in line.split(':')[1].strip().upper() - file.close() - - # Initialization - - global_conf = { - 'global': { - 'server.socket_host': ip, - 'server.socket_port': int(port), - 'server.protocol_version': 'HTTP/1.1' - } - } - - if tls: - # Use pythons built-in SSL - cherrypy.server.ssl_module = 'builtin' - - # Point to certificate files - - if not os.path.exists(pub): - print '[INFO] The public certificate does not exist' - sys.exit(0) - - if not os.path.exists(priv): - print '[INFO] The private key does not exist' - sys.exit(0) - - cherrypy.server.ssl_certificate = pub - cherrypy.server.ssl_private_key = priv - - if auth: - userpassdict = {id: psswd} - checkpassword = cherrypy.lib.auth_basic.checkpassword_dict(userpassdict) - - app_conf = {'/': - {'tools.auth_basic.on': True, - 'tools.auth_basic.realm': 'earth', - 'tools.auth_basic.checkpassword': checkpassword, - } - } - - cherrypy.tree.mount(TestManager(), '/', app_conf) - else: - cherrypy.tree.mount(TestManager(), '/') - - cherrypy.config.update(global_conf) - - # Start server - - cherrypy.engine.start() - cherrypy.engine.block() diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer_config b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer_config deleted file mode 100644 index dc28581cc..000000000 --- a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer_config +++ /dev/null @@ -1,55 +0,0 @@ -# /*- -# * ============LICENSE_START======================================================= -# * ONAP : APPC -# * ================================================================================ -# * Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -# * ================================================================================ -# * Copyright (C) 2017 Amdocs -# * ============================================================================= -# * Licensed under the Apache License, Version 2.0 (the "License"); -# * you may not use this file except in compliance with the License. -# * You may obtain a copy of the License at -# * -# * http://www.apache.org/licenses/LICENSE-2.0 -# * -# * Unless required by applicable law or agreed to in writing, software -# * distributed under the License is distributed on an "AS IS" BASIS, -# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# * See the License for the specific language governing permissions and -# * limitations under the License. -# * -# * ECOMP is a trademark and service mark of AT&T Intellectual Property. -# * ============LICENSE_END========================================================= -# */ - -# Host definition -ip: 0.0.0.0 -port: 8000 - -# Security (controls use of TLS encrypton and RestServer authentication) -tls: no -auth: no - -# TLS certificates (must be built on application host) -priv: provide_privated_key.pem -pub: provide_public_key.pem - -# RestServer authentication -id: provide_RestServer_id -psswd: provide_password_4_RestServer_id - -# Mysql -host: localhost -user: mysql_user_id -passwd: password_4_mysql_user_id -db: ansible - -# Playbooks -from_files: yes -ansible_path: /home/ubuntu/RestServerOpenSource -ansible_inv: Ansible_inventory -ansible_temp: PlaybooksTemp -timeout_seconds: 60 - -# Blocking on GetResults -getresults_block: yes diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/ansible_sleep@0.00.yml b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/ansible_sleep@0.00.yml deleted file mode 100644 index aba2919e5..000000000 --- a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/ansible_sleep@0.00.yml +++ /dev/null @@ -1,42 +0,0 @@ -# /*- -# * ============LICENSE_START======================================================= -# * ONAP : APPC -# * ================================================================================ -# * Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -# * ================================================================================ -# * Copyright (C) 2017 Amdocs -# * ============================================================================= -# * Licensed under the Apache License, Version 2.0 (the "License"); -# * you may not use this file except in compliance with the License. -# * You may obtain a copy of the License at -# * -# * http://www.apache.org/licenses/LICENSE-2.0 -# * -# * Unless required by applicable law or agreed to in writing, software -# * distributed under the License is distributed on an "AS IS" BASIS, -# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# * See the License for the specific language governing permissions and -# * limitations under the License. -# * -# * ECOMP is a trademark and service mark of AT&T Intellectual Property. -# * ============LICENSE_END========================================================= -# */ - -- hosts: all - - # Mandatory: - vars: - sleep_time: "{{Sleep|default(10)}}" - - tasks: - - - debug: - msg: "Sleep time: {{ sleep_time }}" - - - name: sleep - shell: sleep {{ sleep_time }} - - - - debug: - msg: "Done" - |