[feature/APPC-7] ansible server commit

Change-Id: I87b4843ca5d646e390d985be27aa1e3b94491d07
Signed-off-by: ecnoel <eric.noel@att.com>
Signed-off-by: Patrick Brady <pb071s@att.com>

8 files changed, 1850 insertions, 0 deletions

diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleModule.py b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleModule.py
new file mode 100644
index 000000000..eb32abd14
--- /dev/null
+++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleModule.py
@@ -0,0 +1,167 @@
+'''
+/*-
+* ============LICENSE_START=======================================================
+* APPC
+* ================================================================================
+* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
+* ================================================================================
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+* ============LICENSE_END=========================================================
+* ECOMP is a trademark and service mark of AT&T Intellectual Property.
+*/
+'''
+
+import os, subprocess
+import sys
+from collections import namedtuple
+import json
+
+import uuid
+
+def ansibleSysCall (inventory_path, playbook_path, nodelist, mandatory,
+                    envparameters, localparameters, lcm, timeout):
+
+    print "***> in AnsibleModule.ansibleSysCall"
+    print "   EnvParameters:  ", envparameters
+    print "   LocalParameters:", localparameters
+    print "   Inventory:      ", inventory_path
+    print "   Playbook:       ", playbook_path
+    print "   NodeList:       ", nodelist
+    print "   Mandatory:      ", mandatory
+    print "   Timeout:        ", timeout
+    log = []
+
+    str_parameters = ''
+                
+    if not envparameters == {}:
+        for key in envparameters:
+            if str_parameters == '':
+                str_parameters = '"'  + str(key) + '=\'' + str(envparameters[key])  + '\''
+            else:
+                str_parameters += ' '  + str(key) + '=\'' + str(envparameters[key])  + '\''
+        str_parameters += '"'
+                        
+    if len(str_parameters) > 0:
+        cmd = 'timeout --signal=KILL ' + str(timeout) + \
+              ' ansible-playbook -v --extra-vars ' + str_parameters + ' -i ' + \
+              inventory_path + ' ' + playbook_path
+    else:
+        cmd = 'timeout --signal=KILL ' + str(timeout) + \
+              ' ansible-playbook -v -i ' + inventory_path + ' ' + playbook_path
+
+    print "   CMD:            ", cmd
+
+    print "\n =================ANSIBLE STDOUT BEGIN============================================\n"
+    p = subprocess.Popen(cmd, shell=True,
+                         stdout=subprocess.PIPE,
+                         stderr=subprocess.STDOUT) 
+    # p.wait()
+    (stdout_value, err) = p.communicate()
+    
+    stdout_value_cleanup = ''
+    for line in stdout_value:
+        stdout_value_cleanup += line.replace('  ', ' ')
+    stdout_value = stdout_value_cleanup.splitlines() 
+
+    ParseFlag = False
+    retval = {}
+    returncode = p.returncode
+
+    if returncode == 137:
+        
+        print "   ansible-playbook system call timed out"
+        # ansible-playbook system call timed out
+        for line in stdout_value: # p.stdout.readlines():
+            log.append (line)
+            
+            
+    elif 'ping' in lcm:
+
+        targetnode = envparameters['TargetNode'].split(' ')
+        str_json = None
+        for line in stdout_value: # p.stdout.readlines():
+            print line # line,
+            if "PLAY RECAP" in line:
+                ParseFlag = False
+            if ParseFlag and len(line.strip())>0:
+                str_json += line.strip()
+            if "TASK [debug]" in line:
+                ParseFlag = True
+                str_json = ''
+            log.append (line)
+
+        if str_json:
+            if '=>' in str_json:
+                out_json =eval(str_json.split('=>')[1].replace('true','True').replace('false','False'))
+
+                if 'ping.stdout_lines' in out_json:
+                    for node in targetnode:
+                        ip_address = node
+                        ok_flag = '0'
+                        changed_flag = '0'
+                        unreachable_flag = '0'
+                        failed_flag = '1'
+                        for rec in out_json['ping.stdout_lines']:
+                            if node in rec and "is alive" in rec:
+                                ok_flag = '1'
+                                changed_flag = '1'
+                                unreachable_flag = '0'
+                                failed_flag = '0'
+                        for rec in out_json['ping.stdout_lines']:
+                            if node in rec and "address not found" in rec:
+                                ok_flag = '0'
+                                changed_flag = '0'
+                                unreachable_flag = '1'
+                                failed_flag = '0'
+                        retval[ip_address]=[ok_flag, changed_flag, unreachable_flag,
+                                            failed_flag]
+    else:
+            
+        for line in stdout_value: # p.stdout.readlines():
+            print line # line,
+            if ParseFlag and len(line.strip())>0:
+                ip_address = line.split(':')[0].strip()
+                ok_flag = line.split(':')[1].strip().split('=')[1].split('changed')[0].strip()
+                changed_flag = line.split(':')[1].strip().split('=')[2].split('unreachable')[0].strip()
+                unreachable_flag = line.split(':')[1].strip().split('=')[3].split('failed')[0].strip()
+                failed_flag = line.split(':')[1].strip().split('=')[4].strip()
+                retval[ip_address]=[ok_flag, changed_flag, unreachable_flag, failed_flag]
+            if "PLAY RECAP" in line:
+                ParseFlag = True
+            log.append (line)
+        
+    # retval['p'] = p.wait()
+
+    print " =================ANSIBLE STDOUT END==============================================\n"
+
+    return retval, log, returncode
+
+if __name__ == '__main__':
+
+    from multiprocessing import Process, Value, Array, Manager
+    import time
+
+    nodelist = 'host'
+
+    playbook_file = 'ansible_sleep@0.00.yml'
+
+
+    d = Manager().dict()
+    
+    p = Process(nodelist=ansible_call, args=('ansible_module_config', playbook_file, nodelist,d, ))
+    p.start()
+
+    print "Process running"
+    print d
+    p.join()
+    print d
diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleSql.py b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleSql.py
new file mode 100644
index 000000000..675000428
--- /dev/null
+++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/AnsibleSql.py
@@ -0,0 +1,319 @@
+'''
+/*-
+* ============LICENSE_START=======================================================
+* APPC
+* ================================================================================
+* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
+* ================================================================================
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+* ============LICENSE_END=========================================================
+* ECOMP is a trademark and service mark of AT&T Intellectual Property.
+*/
+'''
+
+import pymysql, sys
+from os import listdir
+from os.path import isfile, join
+
+class mySql():
+    
+    def __init__(self, myhost, myuser, mypasswd, mydb):
+        self.con = True
+        self.error = ''
+        self.db = None
+        try:
+            self.db = pymysql.connect(host=myhost,
+                                      user=myuser,
+                                      passwd=mypasswd,
+                                      db=mydb)
+            self.cur = self.db.cursor()
+        except Exception as e:
+            self.error = e[1]
+            self.con = False
+
+    def Query (self, myquery, val = None):
+        results = None
+        try:
+            if val:
+                self.cur.execute(myquery, val)
+            else:
+                self.cur.execute(myquery)
+            self.db.commit()
+            results = self.cur.fetchall()
+        except Exception, e:
+            results = repr(e)
+        return results
+    
+    def Close (self):
+        if self.db:
+            self.db.close()
+
+def loadPlaybook (sqlintf, value, version, ext = '.yml'):
+
+    errorCode = 0
+    diag = ''
+    
+    # Test if primary key already defined
+    query = "SELECT name FROM playbook WHERE name='" + value +"'"
+    results = sqlintf.Query (query)
+    if len(results) > 0:
+        pass
+    else:
+        query = "INSERT INTO playbook (name) VALUES ('" + value + "')"
+        results = sqlintf.Query (query)
+        if len(results) > 0:
+            errorCode = 1
+            diag = results
+
+    # Load playbook
+    file = open(playbook_path + value + ext, 'r')
+    load_file = file.read()
+        
+    if not errorCode:
+        sql = "UPDATE playbook SET value=%s, version=%s, type=%s WHERE name=%s"
+
+        results = sqlintf.Query(sql, (load_file, version, ext, value))
+
+        if len (results) > 0:
+            # Error loading playbook
+            errorCode = 1
+            diag = results
+
+    return errorCode, diag
+
+def loadCredentials (sqlintf, hostgroup, hostname, cred):
+    errorCode = 0
+    diag = ''
+    
+    # Load credentials
+
+    query = "SELECT hostname,hostgroup FROM inventory WHERE hostname='" + hostname +"'"
+    results = sqlintf.Query (query)
+
+    if hostname in str (results):
+
+        results_hostgroups = results[0][1]
+        
+        if hostgroup in results_hostgroups.split(','):
+            query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\
+                    cred +\
+                    "' WHERE hostname='" + hostname + "'"
+        else:
+
+            results_hostgroups = results_hostgroups + ',' + hostgroup
+            
+            query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\
+                    cred + "',hostgroup='" + results_hostgroups + \
+                    "' WHERE hostname='" + hostname + "'"
+                        
+        results = sqlintf.Query (query)
+        
+    else:
+        
+        query = "INSERT INTO inventory (hostgroup, hostname, credentials) VALUES ('" + \
+                hostgroup + "','" + hostname + "','" + cred + "')"
+        results = sqlintf.Query (query)
+
+    if len (results) > 0:
+        # Error loading playbook
+        errorCode = 1
+        diag = results
+
+    return errorCode, diag
+    
+
+def readPlaybook (sqlintf, value, version=None):
+
+    errorCode = 0
+    diag = ''
+
+    print "***> in AnsibleSql.readPlaybook"
+    
+    if not version:
+        query = "SELECT MAX(version) FROM playbook WHERE name like'" + value + "%'"
+        print "   Query:", query
+        results = sqlintf.Query (query)
+        version = results[0][0]
+
+    print "   Provided playbook name:", value 
+    print "   Used version:", version
+
+    results = []
+    if version:
+        query = "SELECT value,type FROM playbook WHERE name='" + value + "@" + version + "'"
+        results = sqlintf.Query (query)
+
+        print "Query:", query
+        print "Results:", results
+    
+    if len(results) == 0:
+        errorCode = 1
+    else:
+        if len(results[0]) == 0:
+            errorCode = 1
+            diag = results[0]
+        else:
+            diag = results[0]
+
+    return value, version, errorCode, diag
+
+def readCredentials (sqlintf, tag):
+    errorCode = []
+    diag = []
+
+    print "***> in AnsibleSql.readCredential"
+    
+    # Load credentials
+
+    for rec in tag:
+
+        # Try hostgroup
+        query = "SELECT hostgroup, hostname, credentials FROM inventory WHERE hostgroup LIKE '%" + \
+                rec +"%'"
+        query_results = sqlintf.Query (query)
+
+        results = ()
+        for q in query_results:
+            if rec in q[0].split(','):
+                l = list(q)
+                l[0] = rec
+                q = tuple(l)
+                results = (q,) + results
+
+        if len(results) == 0:
+            # Try hostname
+            query = "SELECT hostgroup, hostname, credentials FROM inventory WHERE hostname='" + \
+                    rec +"'"
+            results = sqlintf.Query (query)
+
+        print "   Query:", query
+        print "   Results:", len(results), results
+
+        if len(results) == 0:
+            errorCode = 1
+            hostgroup = rec
+            hostname = rec
+            credentials = 'ansible_connection=ssh ansible_ssh_user=na ansible_ssh_private_key_file=na\n'
+            diag.append([hostgroup, hostname, credentials])
+        else:
+            errorCode = 0
+            for i in range(len (results)):
+                for h in results[i][0].split(','):
+                    hostgroup = h
+                    hostname = results[i][1]
+                    credentials = results[i][2]
+                    diag.append([hostgroup, hostname, credentials])
+
+    return errorCode, diag
+    
+
+if __name__ == '__main__':
+
+    ################################################################
+    # Change below
+    ################################################################
+    host="localhost"                    # your host, usually localhost
+    user="mysql_user_id"                # your username
+    passwd="password_4_mysql_user_id"   # your password
+    db="ansible"                        # name of the data base
+
+    playbook_path = "/home/ubuntu/RestServerOpenSource/"
+    inventory = "/home/ubuntu/RestServerOpenSource/Ansible_inventory"
+    ################################################################
+
+    onlyfiles = [f for f in listdir(playbook_path)
+                 if isfile(join(playbook_path, f))]
+
+    sqlintf = mySql (host, user, passwd, db)
+
+    # Load playbooks
+
+    print "Loading playbooks"
+    for file in onlyfiles:
+        if "yml" in file:
+
+            name = file.split (".yml")[0]
+            print "  Loading:", name
+            version = name.split("@")[1]
+            errorCode, diag = loadPlaybook (sqlintf, name, version, '.yml')
+            if errorCode:
+                print "  Results: Failed - ", diag
+            else:
+                print "  Results: Success"
+
+    print "\nLoading inventory"
+    
+    # Load inventory
+
+    hostgroup = None
+    inv = {}
+    file = open(inventory, 'r')
+
+    for line in file:
+
+        if '[' in line and ']' in line:
+            hostgroup = line.strip().replace('[','').replace(']','')
+            inv[hostgroup] = {}
+        elif hostgroup and len(line.strip())>0:
+            host = line.strip().split(" ")[0]
+            credentials = line.replace(host,"")
+            inv[hostgroup][host] = credentials
+                               
+    file.close()
+
+    for hostgroup in inv:
+        print "  Loading:", hostgroup
+        hostfqdn = ''
+        cred = ''
+        for hostname in inv[hostgroup]:
+            cred = inv[hostgroup][hostname]
+            errorCode, diag = loadCredentials (sqlintf, hostgroup, hostname, cred)
+            if errorCode:
+                print "  Results: Failed - ", diag
+            else:
+                print "  Results: Success"
+                
+    print "\nReading playbook"
+    
+    # Read playbook
+
+    if not sqlintf.con:
+        print "Cannot connect to MySql:", sqlintf.error
+        sys.exit()
+        
+    name = "ansible_sleep"
+    print "Reading playbook:", name
+    value, version, errorCode, diag = readPlaybook (sqlintf, name)
+    if errorCode:
+        print "Results: Failed - ", diag
+    else:
+        print "Results: Success"
+        print value
+        print version
+        print diag
+
+    print "\nReading inventory"
+
+    # Read inventory
+
+    tag = ["your_inventory_test_group_name"]
+    print "Reading inventory tag:", tag
+    errorCode, diag = readCredentials (sqlintf, tag)
+    if errorCode:
+        print "Results: Failed - ", diag
+    else:
+        print "Results: Success"
+        print diag
+                
+    sqlintf.Close()
+
diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/Ansible_inventory b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/Ansible_inventory
new file mode 100644
index 000000000..ea68bc272
--- /dev/null
+++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/Ansible_inventory
@@ -0,0 +1,24 @@
+# /*-
+# * ============LICENSE_START=======================================================
+# * APPC
+# * ================================================================================
+# * Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
+# * ================================================================================
+# * Licensed under the Apache License, Version 2.0 (the "License");
+# * you may not use this file except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.apache.org/licenses/LICENSE-2.0
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# * ============LICENSE_END=========================================================
+# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
+# */
+
+[host]
+localhost   ansible_connection=local
+
diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/LoadAnsibleMySql.py b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/LoadAnsibleMySql.py
new file mode 100644
index 000000000..850c4b84a
--- /dev/null
+++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/LoadAnsibleMySql.py
@@ -0,0 +1,204 @@
+'''
+/*-
+* ============LICENSE_START=======================================================
+* APPC
+* ================================================================================
+* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
+* ================================================================================
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+* ============LICENSE_END=========================================================
+* ECOMP is a trademark and service mark of AT&T Intellectual Property.
+*/
+'''
+
+#!/usr/bin/python
+import pymysql
+from os import listdir
+from os.path import isfile, join
+
+class mySql():
+    
+    def __init__(self, myhost, myuser, mypasswd, mydb):
+        self.db = pymysql.connect(host=myhost,
+                                  user=myuser,
+                                  passwd=mypasswd,
+                                  db=mydb)
+        self.cur = self.db.cursor()
+
+    def Query (self, myquery, val = None):
+        results = None
+        error = None
+        try:
+            if val:
+                self.cur.execute(myquery, val)
+            else:
+                self.cur.execute(myquery)
+            self.db.commit()
+            results = self.cur.fetchall()
+        except Exception, e:
+            error = str (e)
+        return results, error
+
+    def Close (self):
+        self.db.close()
+
+def loadPlaybook (value, version, ext = '.yml'):
+
+    errorCode = 0
+    diag = ''
+    
+    # Test if primary key already defined
+    query = "SELECT name FROM playbook WHERE name='" + value +"'"
+    results, error = sqlintf.Query (query)
+    if results:
+        # print "Primary key already defined: Updating playbook"
+        pass
+    else:
+        # print "Primary key not defined: Insert new playbook"
+        query = "INSERT INTO playbook (name) VALUES ('" + value + "')"
+        results, error = sqlintf.Query (query)
+        if error:
+            errorCode = 1
+            diag = error
+
+    # Load playbook
+    file = open(playbook_path + value + ext, 'r')
+    load_file = file.read()
+        
+    # Load playbook
+
+    if not errorCode:
+        sql = "UPDATE playbook SET value=%s, version=%s, type=%s WHERE name=%s"
+
+        results, error = sqlintf.Query(sql, (load_file, version, ext, value))
+
+        if error:
+            # Error loading playbook
+            errorCode = 1
+            diag = error
+            
+    return errorCode, diag
+
+def loadCredentials (hostgroup, hostname, cred):
+    errorCode = 0
+    diag = ''
+    
+    # Load credentials
+
+    query = "SELECT hostname,hostgroup FROM inventory WHERE hostname='" + hostname +"'"
+    results = sqlintf.Query (query)
+
+    print '==>', results
+    
+    if hostname in str(results):
+
+        results_hostgroups = results[0][0][1]
+
+        # print "Record already defined: Updating inventory"
+        if hostgroup in results_hostgroups.split(','):
+            query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\
+                    cred +\
+                    "' WHERE hostname='" + hostname + "'"
+        else:
+            
+            results_hostgroups = results_hostgroups + ',' + hostgroup
+
+            query = "UPDATE inventory SET hostname='" + hostname + "',credentials='" +\
+                    cred + "',hostgroup='" + results_hostgroups + \
+                    "' WHERE hostname='" + hostname + "'"
+
+        results, error = sqlintf.Query (query)
+        
+    else:
+        
+        query = "INSERT INTO inventory (hostgroup, hostname, credentials) VALUES ('" + \
+                hostgroup + "','" + hostname + "','" + cred + "')"
+        results, error = sqlintf.Query (query)
+
+    if error:
+        # Error loading credentials
+        errorCode = 1
+        diag = results
+
+    return errorCode, diag
+    
+
+if __name__ == '__main__':
+
+    ################################################################
+    # Change below
+    ################################################################
+    host="localhost"                    # your host, usually localhost
+    user="mysql_user_id"                # your username
+    passwd="password_4_mysql_user_id"   # your password
+    db="ansible"                        # name of the data base
+
+    playbook_path = "/home/ubuntu/RestServerOpenSource/"
+    inventory = "/home/ubuntu/RestServerOpenSource/Ansible_inventory"
+    ################################################################
+    
+    onlyfiles = [f for f in listdir(playbook_path)
+                 if isfile(join(playbook_path, f))]
+
+    sqlintf = mySql (host, user, passwd, db)
+
+    # Load playbooks
+    print "Loading playbooks"
+    for file in onlyfiles:
+        if "yml" in file:
+            name = file.split (".yml")[0]
+            print "  Loading:", name
+            version = name.split("@")[1]
+            errorCode, diag = loadPlaybook (name, version)
+            if errorCode:
+                print "  Results: Failed - ", diag
+            else:
+                print "  Results: Success"
+        if "tar.gz" in file:
+            name = file.split (".tar.gz")[0]
+            print "  Loading:", name
+            version = name.split("@")[1]
+            errorCode, diag = loadPlaybook (name, version, ".tar.gz")
+
+    print "\nLoading inventory"
+    
+    # Load inventory
+    hostgroup = None
+    inv = {}
+    file = open(inventory, 'r')
+
+    for line in file:
+
+        if '[' in line and ']' in line:
+            hostgroup = line.strip().replace('[','').replace(']','')
+            inv[hostgroup] = {}
+        elif hostgroup and len(line.strip())>0:
+            host = line.strip().split(" ")[0]
+            credentials = line.replace(host,"")
+            inv[hostgroup][host] = credentials
+                               
+    file.close()
+
+    for hostgroup in inv:
+        print "  Loading:", hostgroup
+        hostfqdn = ''
+        cred = ''
+        for hostname in inv[hostgroup]:
+            cred = inv[hostgroup][hostname]
+            errorCode, diag = loadCredentials (hostgroup, hostname, cred)
+            if errorCode:
+                print "  Results: Failed - ", diag
+            else:
+                print "  Results: Success"
+                
+    sqlintf.Close()
diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/README b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/README
new file mode 100644
index 000000000..65c12e9ed
--- /dev/null
+++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/README
@@ -0,0 +1,100 @@
+'''
+/*-
+* ============LICENSE_START=======================================================
+* APPC
+* ================================================================================
+* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
+* ================================================================================
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+* ============LICENSE_END=========================================================
+* ECOMP is a trademark and service mark of AT&T Intellectual Property.
+*/
+'''
+
+============
+INSTALLATION:
+============
+
+Python:
+-------
+sudo apt-get install python2.7
+sudo apt-get install python-pip
+pip install PyMySQL
+pip install requests
+
+Ansible:
+--------
+sudo apt-get install software-properties-common
+sudo apt-add-repository ppa:ansible/ansible
+sudo apt-get update
+sudo apt-get install ansible
+
+SQL db:
+-------
+
+sudo apt-get install mysql-server
+
+Set root passwd during installation (i.e. password_4_mysql_user_id)
+
+sudo service mysql restart
+
+Setup mysql:
+------------
+
+mysql -u [username]-p
+mysql -uroot -p
+
+Create user (i.e. id=mysql_user_id psswd=password_4_mysql_user_id)
+  CREATE USER 'appc'@'%' IDENTIFIED BY 'password_4_mysql_user_id';
+  GRANT ALL PRIVILEGES ON *.* TO 'mysql_user_id'@'%';
+  SET PASSWORD FOR 'mysql_user_id'@'%'=PASSWORD('password_4_mysql_user_id');
+
+Create schema
+  CREATE SCHEMA ansible;
+  show databases;
+  use ansible;
+  CREATE TABLE playbook (name VARCHAR(45) NOT NULL, value BLOB, type VARCHAR(60), version VARCHAR(60), PRIMARY KEY (name));
+  show tables;
+  CREATE TABLE inventory (hostname VARCHAR(45) NOT NULL, hostgroup VARCHAR(45), credentials VARCHAR(500), PRIMARY KEY (hostname));
+  SHOW COLUMNS FROM playbook;
+  SHOW COLUMNS FROM inventory;
+  GRANT ALL PRIVILEGES ON *.* TO 'mysql_user_id'@'%' IDENTIFIED BY 'password_4_mysql_user_id' WITH GRANT OPTION;
+  GRANT ALL PRIVILEGES ON *.* TO 'ansible'@'%' IDENTIFIED BY 'ansible_agent' WITH GRANT OPTION;
+  FLUSH PRIVILEGES;
+
+Load db:
+--------
+
+python LoadAnsibleMySql.py
+
+=============
+CODE TESTING:
+=============
+1. Start RestServer: python RestServer.py
+
+2. Try curl commands (case no secured REST: http & no authentication):
+
+- Request to execute playbook:
+curl -H "Content-type: application/json" -X POST -d '{"Id": "10", "PlaybookName": "ansible_sleep", "NodeList": ["host"], "Timeout": "60", "EnvParameters": {"Sleep": "10"}}' http://0.0.0.0:8000/Dispatch
+
+response: {"ExpectedDuration": "60sec", "StatusMessage": "PENDING", "StatusCode": 100}
+
+- Get results (blocked until test finished):
+curl --cacert ~/SshKey/fusion_eric-vm_cert.pem --user "appc:abc123" -H "Content-type: application/json" -X GET  "http://0.0.0.0:8000/Dispatch/?Id=10&Type=GetResult"
+
+response: {"Results": {"localhost": {"GroupName": "host", "StatusMessage": "SUCCESS", "StatusCode": 200}}, "PlaybookName": "ansible_sleep", "Version": "0.00", "Duration": "11.261794", "StatusMessage": "FINISHED", "StatusCode": 200}
+
+- Delete playbook execution information
+curl --cacert ~/SshKey/fusion_eric-vm_cert.pem --user "appc:abc123" -H "Content-type: application/json" -X DELETE  http://0.0.0.0:8000/Dispatch/?Id=10
+
+response: {"StatusMessage": "PLAYBOOK EXECUTION RECORDS DELETED", "StatusCode": 200}
diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer.py b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer.py
new file mode 100644
index 000000000..470cdf065
--- /dev/null
+++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer.py
@@ -0,0 +1,945 @@
+'''
+/*-
+* ============LICENSE_START=======================================================
+* APPC
+* ================================================================================
+* Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
+* ================================================================================
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+* ============LICENSE_END=========================================================
+* ECOMP is a trademark and service mark of AT&T Intellectual Property.
+*/
+'''
+
+import time, datetime, json, os, sys, subprocess, re
+import uuid
+import tarfile
+import shutil
+
+import requests
+
+import cherrypy
+from cherrypy.lib.httputil import parse_query_string
+from cherrypy.lib import auth_basic
+
+from multiprocessing import Process, Manager
+
+from AnsibleModule import ansibleSysCall
+
+import AnsibleSql
+from AnsibleSql import readPlaybook, readCredentials
+
+from os import listdir
+from os.path import isfile, join
+
+TestRecord = Manager().dict()
+ActiveProcess = {}
+
+def sys_call (cmd):
+    p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+    output = p.stdout.readlines()
+    retval = p.wait()
+    if len (output) > 0:
+        for i in range(len(output)):
+            output[i] = output[i].strip()
+    return retval, output
+
+def callback (Id, Result, Output, Log, returncode):
+    
+    print "***> in RestServer.callback"
+
+    if Id in TestRecord:
+        time_now = datetime.datetime.utcnow()
+        delta_time = (time_now - TestRecord[Id]['Time']).total_seconds()
+        Result['PlaybookName'] = TestRecord[Id]['PlaybookName']
+        Result['Version'] = TestRecord[Id]['Version']
+        if returncode == 137:
+            Result['StatusCode'] = 500
+            Result['StatusMessage'] = "TERMINATED"
+        else:
+            Result['StatusCode'] = 200
+            Result['StatusMessage'] = "FINISHED"
+
+        # Need to update the whole data structure for key=Id otherwise Manager is not updated
+        TestRecord[Id] = {'PlaybookName': TestRecord[Id]['PlaybookName'],
+                          'LCM': TestRecord[Id]['LCM'],
+                          'Version': TestRecord[Id]['Version'],
+                          'NodeList': TestRecord[Id]['NodeList'],
+                          'HostGroupList': TestRecord[Id]['HostGroupList'],
+                          'HostNameList': TestRecord[Id]['HostNameList'],
+                          'Time': TestRecord[Id]['Time'],
+                          'Timeout': TestRecord[Id]['Timeout'],
+                          'Duration': str(delta_time),
+                          'EnvParameters': TestRecord[Id]['EnvParameters'],
+                          'LocalParameters': TestRecord[Id]['LocalParameters'],
+                          'FileParameters': TestRecord[Id]['FileParameters'],
+                          'CallBack': TestRecord[Id]['CallBack'],
+                          'Result': Result,
+                          'Log': Log, 
+                          'Output': Output, 
+                          'Path': TestRecord[Id]['Path'],
+                          'Mandatory': TestRecord[Id]['Path']}
+
+        if not TestRecord[Id]['CallBack'] == None:
+            
+            # Posting results to callback server
+
+            data = {"StatusCode": 200,
+                    "StatusMessage": "FINISHED",
+                    "PlaybookName": TestRecord[Id]["PlaybookName"],
+                    "Version": TestRecord[Id]["Version"],
+                    "Duration": TestRecord[Id]["Duration"],
+                    "Results": TestRecord[Id]['Result']['Results']}
+
+            if not TestRecord[Id]['Output']['Output'] == {}:
+                for key in data["Results"]:
+                    if key in TestRecord[Id]['Output']['Output']:
+                        data["Results"][key]["Output"] = TestRecord[Id]['Output']['Output'][key]
+
+            print "     Posting to", TestRecord[Id]['CallBack']
+            
+            s = requests.Session()
+            r = s.post(TestRecord[Id]['CallBack'], data = json.dumps(data),
+                       headers = {'content-type': 'application/json'})
+            print  "     Response", r.status_code, r.text
+
+def RunAnsible_Playbook (callback, Id, Inventory, Playbook, NodeList, TestRecord,
+                         Path, ArchiveFlag):
+
+    print "***> in RestServer.RunAnsible_Playbook"
+
+    # Run test in playbook for given target
+    Result = ''
+
+    retval, log, returncode = ansibleSysCall (Inventory, Playbook, NodeList,
+                                              TestRecord[Id]['Mandatory'],
+                                              TestRecord[Id]['EnvParameters'],
+                                              TestRecord[Id]['LocalParameters'],
+                                              TestRecord[Id]['LCM'],
+                                              TestRecord[Id]['Timeout'])
+
+
+    print "   returncode:", returncode
+    print "   retval:    ", retval
+    print "   log:       ", log
+    
+    Log = ''.join(log)
+    Output = {'Output': {}}
+    
+    onlyfiles = [f for f in listdir(Path)
+                 if isfile(join(Path, f))]
+
+    for file in onlyfiles:
+        if "results.txt" in file:
+            f = open(Path + "/" + file, "r")
+            key = file.split("_")[0]
+            Output['Output'][key] = f.read()
+            f.close()
+
+    Result = {'Results': {}}
+    if 'could not be found' in Log:
+        Result['Results'] = {"StatusCode": 101,
+                             "StatusMessage": "PLAYBOOK NOT FOUND"}
+    if returncode == 137:
+        Result['Results'] = {"StatusCode": 500,
+                             "StatusMessage": "TERMINATED"}
+
+    elif TestRecord[Id]['NodeList'] == []:
+        
+        host_index = None
+        
+        if 'TargetNode' in TestRecord[Id]['EnvParameters']:
+            targetlist = TestRecord[Id]['EnvParameters']['TargetNode'].split(' ')
+        else:
+            targetlist = ["localhost"]
+            
+        for key in retval:
+            for i in range (len(targetlist)):
+                if key in targetlist[i]:
+                    host_index = i
+    
+            if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \
+                   int(retval[key][3]) == 0:
+
+                if host_index:
+                    Result['Results'][targetlist[host_index]] = \
+                             {"GroupName": 'na', "StatusCode": 200, \
+                              "StatusMessage": "SUCCESS"}
+                else:
+                    Result['Results'][key] = \
+                             {"GroupName": 'na', "StatusCode": 200, \
+                              "StatusMessage": "SUCCESS"}                    
+            elif int(retval[key][2]) > 0:
+                if host_index:
+                    Result['Results'][targetlist[host_index]] = \
+                       {"GroupName": 'na', "StatusCode": 400, \
+                        "StatusMessage": "NOT REACHABLE"}
+                else:
+                    Result['Results'][key] = \
+                       {"GroupName": 'na', "StatusCode": 400, \
+                        "StatusMessage": "NOT REACHABLE"}                    
+            elif int(retval[key][3]) > 0:
+                if host_index:                
+                    Result['Results'][targetlist[host_index]] = \
+                       {"GroupName": 'na', "StatusCode": 400, \
+                        "StatusMessage": "FAILURE"}
+                else:
+                    Result['Results'][key] = \
+                       {"GroupName": 'na', "StatusCode": 400, \
+                        "StatusMessage": "FAILURE"}                    
+    else:
+        
+        for key in retval:
+
+            if len(TestRecord[Id]['HostNameList']) > 0:
+
+                host_index = []
+                for i in range (len(TestRecord[Id]['HostNameList'])):
+                    if key in TestRecord[Id]['HostNameList'][i]:
+                        host_index.append(i)
+
+                if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \
+                       int(retval[key][3]) == 0:
+
+                    if len(host_index) > 0:
+                        Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \
+                          {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]],
+                           "StatusCode": 200, "StatusMessage": "SUCCESS"}
+                    
+                        for i in range (1, len(host_index)):
+                            Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\
+                             "," + TestRecord[Id]['HostGroupList'][host_index[i]]
+                    else:
+                       Result['Results'][key] = \
+                          {"GroupName": key,
+                           "StatusCode": 200, "StatusMessage": "SUCCESS"}  
+
+                elif int(retval[key][2]) > 0:
+
+                    if len(host_index) > 0:
+                        Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \
+                          {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]],
+                           "StatusCode": 400, "StatusMessage": "NOT REACHABLE"}
+                    
+                        for i in range (1, len(host_index)):
+                            Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\
+                             "," + TestRecord[Id]['HostGroupList'][host_index[i]]
+                    else:
+                       Result['Results'][key] = \
+                          {"GroupName": key,
+                           "StatusCode": 200, "StatusMessage": "NOT REACHABLE"}  
+                    
+                elif int(retval[key][3]) > 0:
+
+                    if len(host_index) > 0:
+                        Result['Results'][TestRecord[Id]['HostNameList'][host_index[0]]] = \
+                          {"GroupName": TestRecord[Id]['HostGroupList'][host_index[0]],
+                           "StatusCode": 400, "StatusMessage": "FAILURE"}
+                    
+                        for i in range (1, len(host_index)):
+                            Result['Results'][TestRecord[Id]['HostNameList'][host_index[i]]]["GroupName"]+=\
+                             "," + TestRecord[Id]['HostGroupList'][host_index[i]]
+                    else:
+                       Result['Results'][key] = \
+                          {"GroupName": key,
+                           "StatusCode": 200, "StatusMessage": "FAILURE"}                          
+            else:
+                host_index = None
+                for i in range (len(TestRecord[Id]['NodeList'])):
+                    if key in TestRecord[Id]['NodeList'][i]:
+                        host_index = i
+    
+                if int(retval[key][0]) > 0 and int(retval[key][2]) == 0 and \
+                       int(retval[key][3]) == 0:
+                    Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \
+                             {"GroupName": 'na', "StatusCode": 200, \
+                             "StatusMessage": "SUCCESS"}
+                elif int(retval[key][2]) > 0:
+                    Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \
+                       {"GroupName": 'na', "StatusCode": 400, "StatusMessage": "NOT REACHABLE"}
+                elif int(retval[key][3]) > 0:
+                    Result['Results'][TestRecord[Id]['NodeList'][host_index]] = \
+                       {"GroupName": 'na', "StatusCode": 400, "StatusMessage": "FAILURE"}
+    
+    callback (Id, Result, Output, Log, returncode)
+
+class TestManager (object):
+
+    @cherrypy.expose
+    @cherrypy.tools.json_out()
+    @cherrypy.tools.json_in()
+    @cherrypy.tools.allow(methods=['POST', 'GET', 'DELETE'])
+
+    def Dispatch(self, **kwargs):
+
+        # Let cherrypy error handler deal with malformed requests
+        # No need for explicit error handler, we use default ones
+
+        time_now = datetime.datetime.utcnow()
+
+        # Erase old test results (2x timeout)
+        if TestRecord:
+            for key in TestRecord.copy():
+                delta_time = (time_now - TestRecord[key]['Time']).seconds
+                if delta_time > 2*TestRecord[key]['Timeout']:
+                    print "Deleted history for test", key
+                    if os.path.exists(TestRecord[key]['Path']):
+                        shutil.rmtree (TestRecord[key]['Path'])
+                    del TestRecord[key]
+                    
+        print "***> in RestServer.Dispatch:", cherrypy.request.method
+
+        HomeDir = os.path.dirname(os.path.realpath("~/"))
+
+        if 'POST' in cherrypy.request.method:
+            
+            input_json = cherrypy.request.json
+            print "   Payload:      ", input_json
+
+            if 'Id' in input_json and 'PlaybookName' in input_json:
+
+                if True:
+
+                    if not input_json['Id'] in TestRecord:
+                    
+                        Id = input_json['Id']
+                        PlaybookName = input_json['PlaybookName']
+
+                        version = None
+                        if 'Version' in input_json:
+                            version = input_json['Version']
+                    
+                        AnsibleInvFail = True
+                        AnsiblePlaybookFail = True
+
+                        MySqlConFail = True
+                        MySqlCause = ''
+
+                        LocalNodeList = None
+
+                        str_uuid = str (uuid.uuid4())
+                        
+                        LCM = PlaybookName.split(".")[0].split('_')[-1]
+                        PlaybookDir = HomeDir + "/" + ansible_temp + "/" + \
+                                      PlaybookName.split(".")[0] + "_" + str_uuid
+                        AnsibleInv = LCM + "_" + "inventory"
+                        ArchiveFlag = False
+
+                        print "   LCM:          ", LCM
+                        print "   PlaybookDir:  ", ansible_temp + PlaybookDir.split(ansible_temp)[1]
+                        print "   AnsibleInv:   ", AnsibleInv
+                        print "   ansible_temp: ", ansible_temp
+
+                        if not os.path.exists(HomeDir + "/" + ansible_temp):
+                            os.makedirs(HomeDir + "/" + ansible_temp)
+
+                        os.mkdir(PlaybookDir)
+
+                        # Process inventory file for target
+                    
+                        hostgrouplist = []
+                        hostnamelist = []
+
+                        NodeList = []
+                        if 'NodeList' in input_json:
+                            NodeList = input_json['NodeList']
+
+                        print "   NodeList:     ", NodeList
+
+                        if NodeList == []:
+                                # By default set to local host
+                                AnsibleInvFail = False
+
+                                LocalNodeList = "host"
+                                LocalCredentials = "localhost   ansible_connection=local"
+                                f = open(PlaybookDir + "/" + AnsibleInv, "w")
+                                f.write("[" + LocalNodeList + "]\n")
+                                f.write(LocalCredentials)
+                                f.close()
+
+                        else:
+
+                                if from_files:
+                                    
+                                    # Get credentials from file
+
+                                    data_inventory_orig = {}
+                                    data_inventory_target = {}
+                                    curr_group = None
+
+                                    print "***>", ansible_path + "/" + ansible_inv
+                                    f = open(ansible_path + "/" + ansible_inv, "r")
+                                    for line in f:
+                                        line = line.rstrip()
+                                        
+                                        if len(line)> 0:
+                                            if '#' not in line:
+                                                if "[" in line and "]" in line:
+                                                    data_inventory_orig[line] = []
+                                                    curr_group = line
+                                                else:
+                                                    data_inventory_orig[curr_group].append(line)
+                                    f.close()
+
+                                    for node in NodeList:
+                                        Fail = True
+                                        if "[" + node + "]" in data_inventory_orig:
+                                            if not "[" + node + "]" in data_inventory_target:
+
+                                                print "RESET", "[" + node + "]"
+                                                data_inventory_target["[" + node + "]"] = []
+                                            else:
+                                                print "OK", "[" + node + "]"
+                                            Fail = False
+                                            for cred in data_inventory_orig["[" + node + "]"]:
+                                                data_inventory_target["[" + node + "]"].append(cred)
+                                                
+                                        else:
+                                            for key in data_inventory_orig:
+                                                if node in " ".join(data_inventory_orig[key]):
+                                                    if not key in data_inventory_target:
+                                                        data_inventory_target[key] = []
+                                                    for cred in data_inventory_orig[key]:
+                                                        if node in cred:
+                                                            data_inventory_target[key].append(cred)
+                                                            Fail = False
+
+                                        if Fail:
+                                            data_inventory_target["["+node+"]"] = \
+                                                   [node + " ansible_connection=ssh ansible_ssh_user=na ansible_ssh_private_key_file=na"]
+                                    
+                                    AnsibleInvFail = False
+
+                                    f = open(PlaybookDir + "/" + AnsibleInv, "w")
+                                    for key in data_inventory_target:
+                                        f.write(key + "\n")
+                                        for rec in data_inventory_target[key]:
+                                            hostgrouplist.append(key.replace("[", '').replace("]", ''))
+                                            hostnamelist.append(rec.split(' ')[0])
+                                            f.write(rec + "\n")
+                                    f.close()
+
+                                else:
+                                    
+                                    # Get credentials from mySQL
+                            
+                                    sqlintf = AnsibleSql.mySql (host, user, passwd,
+                                                                db)
+                                    if sqlintf.con:
+                                        MySqlConFail = False
+                                        errorCode, diag = readCredentials (sqlintf,
+                                                                           NodeList)
+                                    
+                                        print errorCode, diag 
+                                        if len (diag) > 0:
+                                            f = open(PlaybookDir + "/" + AnsibleInv,
+                                                     "w")
+                                            AnsibleInvFail = False
+                                            # [hostgroup, hostname, credentials]
+                                            for i in range(len(diag)):
+                                                f.write('[' +  diag[i][0] + ']' + "\n")
+                                                f.write(diag[i][1]+ " " +  diag[i][2] + "\n\n")
+                                                hostgrouplist.append(diag[i][0])
+                                                hostnamelist.append(diag[i][1])
+                                            f.close()
+                                        else:
+                                            MySqlConFailCause = sqlintf.error
+                                    sqlintf.Close()
+
+                        timeout = timeout_seconds
+                        if 'Timeout' in input_json:
+                            timeout = int (input_json['Timeout'])
+
+                        EnvParam = {}
+                        if 'EnvParameters' in input_json:
+                            EnvParam = input_json['EnvParameters']
+
+                        LocalParam = {}
+                        if 'LocalParameters' in input_json:
+                            LocalParam = input_json['LocalParameters']
+
+                        FileParam = {}
+                        if 'FileParameters' in input_json:
+                            FileParam = input_json['FileParameters']
+                    
+                        callback_flag = None
+                        if 'CallBack' in input_json:
+                            callback_flag = input_json['CallBack']
+
+                        TestRecord[Id] = {'PlaybookName': PlaybookName,
+                                          'LCM': LCM,
+                                          'Version': version,
+                                          'NodeList': NodeList,
+                                          'HostGroupList': hostgrouplist,
+                                          'HostNameList': hostnamelist,
+                                          'Time': time_now,
+                                          'Duration': timeout,
+                                          'Timeout': timeout,
+                                          'EnvParameters': EnvParam,
+                                          'LocalParameters': LocalParam,
+                                          'FileParameters': FileParam,
+                                          'CallBack': callback_flag,
+                                          'Result': {"StatusCode": 100,
+                                                     "StatusMessage": 'PENDING',
+                                                     "ExpectedDuration": str(timeout) + "sec"},
+                                          'Log': '',
+                                          'Output': {},
+                                          'Path': PlaybookDir,
+                                          'Mandatory': None}
+
+                        # Write files
+                        
+                        if not TestRecord[Id]['FileParameters'] == {}:
+                            for key in TestRecord[Id]['FileParameters']:
+                                filename = key
+                                filecontent = TestRecord[Id]['FileParameters'][key]
+                                f = open(PlaybookDir + "/" + filename, "w")
+                                f.write(filecontent)
+                                f.close()
+                                
+                        
+                        # Process playbook
+
+                        if from_files:
+                            
+                            # Get playbooks from files
+
+                            MySqlConFail = False
+                            
+                            version = None
+                            target_PlaybookName = None
+                            
+                            if '@' in PlaybookName:
+                                version = PlaybookName.split("@")[1]
+                                version = version.replace('.yml','')
+                                version = version.replace('.tar.gz','')
+
+                            onlyfiles = [f for f in listdir(ansible_path)
+                                         if isfile(join(ansible_path, f))]
+
+                            version_max = '0.00'
+                            version_target = ''
+                            
+                            for file in onlyfiles:
+                                if LCM in file:
+                                    temp_version = file.split("@")[1]
+                                    temp_version = temp_version.replace('.yml','')
+                                    temp_version = temp_version.replace('.tar.gz','')
+                                    if version_max < temp_version:
+                                        version_max = temp_version
+                                    
+                                    if not version == None:
+                                        if version in PlaybookName:
+                                            version_target = version
+                                            target_PlaybookName = file
+                                            
+                            if target_PlaybookName == None:
+                                for file in onlyfiles:
+                                    if LCM in file and version_max in file:
+                                        target_PlaybookName = file
+                                        version_target = version_max
+                                        
+                            if target_PlaybookName:
+                                AnsiblePlaybookFail = False
+                                readversion = version_target
+                                src  = ansible_path + "/" + target_PlaybookName
+                                if ".tar.gz" in target_PlaybookName:
+                                    dest = PlaybookDir + "/" + LCM + ".tar.gz"
+                                    shutil.copy2(src, dest)
+                                    retcode = subprocess.call(['tar', '-xvzf',
+                                                   dest, "-C", PlaybookDir])
+                                    ArchiveFlag = True
+                                else:
+                                    dest = PlaybookDir + "/" + LCM + ".yml"
+                                    shutil.copy2(src, dest)
+                            
+                        else:
+                            # Get playbooks from mySQL
+
+                            sqlintf = AnsibleSql.mySql (host, user, passwd, db)
+                            if sqlintf.con:
+                                MySqlConFail = False
+                                
+                                name, readversion, AnsiblePlaybookFail, diag = \
+                                  readPlaybook (sqlintf, PlaybookName.split(".")[0],
+                                                version)
+                                
+                                if not AnsiblePlaybookFail:
+
+                                    f = open(PlaybookDir + "/" + LCM + diag[1], "w")
+                                    f.write(diag[0])
+                                    f.close()
+                                    
+                                    if ".tar.gz" in diag[1]:
+                                        retcode = subprocess.call(['tar', '-xvzf',
+                                         PlaybookDir + "/" + LCM + diag[1], "-C", PlaybookDir])
+                                        f.close()
+                                        ArchiveFlag = True
+                            else:
+                                MySqlConFailCause = sqlintf.error
+                            sqlintf.Close()
+
+                        if MySqlConFail:
+                            if os.path.exists(PlaybookDir):
+                                shutil.rmtree (PlaybookDir)
+                            del TestRecord[Id]
+                            return {"StatusCode": 101,
+                                    "StatusMessage": "CANNOT CONNECT TO MYSQL: " \
+                                    + MySqlConFailCause}
+                        elif AnsiblePlaybookFail:
+                            if os.path.exists(PlaybookDir):
+                                shutil.rmtree (PlaybookDir)
+                            del TestRecord[Id]
+                            return {"StatusCode": 101,
+                                    "StatusMessage": "PLAYBOOK NOT FOUND"}
+                        elif AnsibleInvFail:
+                            if os.path.exists(PlaybookDir):
+                                shutil.rmtree (PlaybookDir)
+                            del TestRecord[Id]
+                            return {"StatusCode": 101,
+                                    "StatusMessage": "NODE LIST CREDENTIALS NOT FOUND"}
+                        else:
+
+                            # Test EnvParameters
+                            playbook_path = None
+                            if ArchiveFlag:
+                                for dName, sdName, fList in os.walk(PlaybookDir):
+                                    if LCM+".yml" in fList:
+                                        playbook_path = dName
+                            else:
+                                playbook_path = PlaybookDir
+
+                            # Store local vars
+                            if not os.path.exists(playbook_path + "/vars"):
+                                os.mkdir(playbook_path + "/vars")
+                            if not os.path.isfile(playbook_path + "/vars/defaults.yml"):
+                                os.mknod(playbook_path + "/vars/defaults.yml")
+
+                            for key in TestRecord[Id]['LocalParameters']:
+                                host_index = []
+                                for i in range(len(TestRecord[Id]['HostNameList'])):
+                                    if key in TestRecord[Id]['HostNameList'][i]:
+                                        host_index.append(i)
+                                if len(host_index) == 0:
+                                    for i in range(len(TestRecord[Id]['HostGroupList'])):
+                                        if key in TestRecord[Id]['HostGroupList'][i]:
+                                            host_index.append(i)
+                                if len(host_index) > 0:
+                                    for i in range(len(host_index)):
+                                        f = open(playbook_path + "/vars/" +
+                                                 TestRecord[Id]['HostNameList'][host_index[i]] +
+                                                 ".yml", "a")
+                                        for param in TestRecord[Id]['LocalParameters'][key]:
+                                            f.write(param + ": " +
+                                             str (TestRecord[Id]['LocalParameters'][key][param]) +
+                                                  "\n")
+                                        f.close()
+
+                            # Get mandatory parameters from playbook
+                            Mandatory = []
+                            with open(playbook_path + "/" + LCM + ".yml") as origin_file:
+                                for line in origin_file:
+                                    if "Mandatory" in line:
+                                        temp = line.split(":")[1].strip().replace(' ', '')
+                                        if len(temp) > 0:
+                                            Mandatory = temp.split(",")
+
+                            TestRecord[Id] = {'PlaybookName': TestRecord[Id]['PlaybookName'],
+                                              'LCM': TestRecord[Id]['LCM'],
+                                              'Version': readversion,
+                                              'NodeList': TestRecord[Id]['NodeList'],
+                                              'HostGroupList': TestRecord[Id]['HostGroupList'],
+                                              'HostNameList': TestRecord[Id]['HostNameList'],
+                                              'Time': TestRecord[Id]['Time'],
+                                              'Timeout': TestRecord[Id]['Timeout'],
+                                              'Duration': TestRecord[Id]['Duration'],
+                                              'EnvParameters': TestRecord[Id]['EnvParameters'],
+                                              'LocalParameters': TestRecord[Id]['LocalParameters'],
+                                              'FileParameters': TestRecord[Id]['FileParameters'],
+                                              'CallBack': TestRecord[Id]['CallBack'],
+                                              'Result': TestRecord[Id]['Result'],
+                                              'Log': TestRecord[Id]['Log'],
+                                              'Output': TestRecord[Id]['Output'],
+                                              'Path': TestRecord[Id]['Path'],
+                                              'Mandatory': Mandatory}
+
+                            TestKey = False
+
+                            if Mandatory:
+                                for val in Mandatory:
+                                    if EnvParam:
+                                        if val in EnvParam:
+                                            TestKey = True
+                                        else:
+                                            if LocalParam:
+                                                for key in TestRecord[Id]['NodeList']:
+                                                    if key in LocalParam:
+                                                        if val in LocalParam[key]:
+                                                            TestKey = True
+                                    else:
+                                        if LocalParam:
+                                            for key in TestRecord[Id]['NodeList']:
+                                                if key in LocalParam:
+                                                    if val in LocalParam[key]:
+                                                        TestKey = True
+                                                
+                                if not TestKey:
+                                    if os.path.exists(PlaybookDir):
+                                        shutil.rmtree (PlaybookDir)
+                                    del TestRecord[Id]
+                                    return {"StatusCode": 101,
+                                            "StatusMessage": "MISSING MANDATORY PARAMETER: " + \
+                                            " ".join(str(x) for x in Mandatory)}
+                            
+    
+                            # Cannot use thread because ansible module uses
+                            # signals which are only supported in main thread.
+                            # So use multiprocess with shared object
+
+                            p = Process(target = RunAnsible_Playbook,
+                                        args = (callback, Id,  PlaybookDir + "/" + AnsibleInv,
+                                                playbook_path + "/" + LCM + ".yml",
+                                                NodeList, TestRecord, PlaybookDir,
+                                                ArchiveFlag))
+                            p.start()
+                            ActiveProcess[Id] = p
+                            return TestRecord[Id]['Result']
+                    else:
+                        return {"StatusCode": 101, "StatusMessage": "TEST ID ALREADY DEFINED"}
+
+                else:
+                    return {"StatusCode": 500, "StatusMessage": "REQUEST MUST INCLUDE: NODELIST"}
+                
+            else:
+                return {"StatusCode": 500, "StatusMessage": "JSON OBJECT MUST INCLUDE: ID, PLAYBOOKNAME"}
+
+        elif 'GET' in cherrypy.request.method:
+            
+            input_data = parse_query_string(cherrypy.request.query_string)
+            
+            print "***> in RestServer.GET"
+            print "   Payload: ", input_data, input_data['Type']
+            
+            if 'Id' in input_data and 'Type' in input_data:
+                if not ('GetResult' in input_data['Type'] or 'GetOutput' in input_data['Type'] or 'GetLog' in input_data['Type']):
+                    return {"StatusCode": 500, "StatusMessage": "RESULTS TYPE UNDEFINED"}
+                if input_data['Id'] in TestRecord:
+                    
+                    if 'GetResult' in input_data['Type']:
+                        
+                        print "Result:", TestRecord[input_data['Id']]['Result']
+
+                        if 'StatusMessage' in TestRecord[input_data['Id']]['Result'] and getresults_block:
+
+                            print "*** Request blocked", input_data['Id']
+
+                            while ActiveProcess[input_data['Id']].is_alive():
+                                time.sleep(5)
+
+                            print "*** Request released ", input_data['Id']
+
+                        print TestRecord[input_data['Id']]['Result']
+                        if TestRecord[input_data['Id']]['Result']['StatusCode'] == 500:
+                            out_obj = TestRecord[input_data['Id']]['Result']['Results']
+                        else:
+                            out_obj = {"StatusCode": 200,
+                                   "StatusMessage": "FINISHED",
+                                   "PlaybookName": TestRecord[input_data['Id']]["PlaybookName"],
+                                   "Version": TestRecord[input_data['Id']]["Version"],
+                                   "Duration": TestRecord[input_data['Id']]["Duration"],
+                                   "Results": TestRecord[input_data['Id']]['Result']['Results']}
+                        if not TestRecord[input_data['Id']]['Output']['Output'] == {}:
+                            for key in out_obj["Results"]:
+                                if key in TestRecord[input_data['Id']]['Output']['Output']:
+                                    out_obj["Results"][key]["Output"] = TestRecord[input_data['Id']]['Output']['Output'][key]
+
+                        return out_obj
+
+                    elif 'GetOutput' in input_data['Type']:
+
+                        if TestRecord[input_data['Id']]['Output'] == {} and \
+                               getresults_block:
+
+                            print "*** Request blocked", input_data['Id']
+                            
+                            while TestRecord[input_data['Id']]['Output'] == {} \
+                                      or 'StatusMessage' in TestRecord[input_data['Id']]['Result']:
+                                time.sleep(5)
+
+                            print "*** Request released ", input_data['Id']
+                        
+                        print "Output:", TestRecord[input_data['Id']]['Output']
+                        return {"Output": TestRecord[input_data['Id']]['Output']['Output']}
+                    else:
+                        # GetLog
+
+                        if TestRecord[input_data['Id']]['Log'] == '' and \
+                               getresults_block:
+
+                            print "*** Request blocked", input_data['Id']
+                            
+                            while TestRecord[input_data['Id']]['Log'] == '' \
+                                      or 'StatusMessage' in TestRecord[input_data['Id']]['Result']:
+                                time.sleep(5)
+
+                            print "*** Request released ", input_data['Id']
+                            
+                        print "Log:", TestRecord[input_data['Id']]['Log']
+                        return {"Log": TestRecord[input_data['Id']]['Log']}
+                else:
+                    return {"StatusCode": 500, "StatusMessage": "TEST ID UNDEFINED"}
+            else:
+                return {"StatusCode": 500, "StatusMessage": "MALFORMED REQUEST"}
+        elif 'DELETE' in cherrypy.request.method:
+            input_data = parse_query_string(cherrypy.request.query_string)
+            
+            print "***> in RestServer.DELETE"
+            print "   Payload: ", input_data
+            
+            if input_data['Id'] in TestRecord:
+                if not 'PENDING' in TestRecord[input_data['Id']]['Result']:
+                    print "   Path:", TestRecord[input_data['Id']]['Path']
+                    if os.path.exists(TestRecord[input_data['Id']]['Path']):
+                        shutil.rmtree (TestRecord[input_data['Id']]['Path'])
+                    TestRecord.pop (input_data['Id'])
+                    if input_data['Id'] in ActiveProcess:
+                        ActiveProcess.pop (input_data['Id'])
+
+                    return {"StatusCode": 200, "StatusMessage": "PLAYBOOK EXECUTION RECORDS DELETED"}
+                else:
+                    return {"StatusCode": 200, "StatusMessage": "PENDING"}
+            else:
+                return {"StatusCode": 500, "StatusMessage": "TEST ID UNDEFINED"}
+
+
+if __name__ == '__main__':
+
+    # Read configuration
+
+    config_file_path = "RestServer_config"
+
+    if not os.path.exists(config_file_path):
+        print '[INFO] The config file does not exist'
+        sys.exit(0)
+
+    ip = 'na'
+    port = 'na'
+    tls = False
+    auth = False
+    pub = 'na'
+    id = 'na'
+    priv = 'na'
+    psswd = 'na'
+    timeout_seconds = 'na'
+    ansible_path = 'na'
+    ansible_inv = 'na'
+    ansible_temp = 'na'    
+    host = 'na'
+    user = 'na'
+    passwd = 'na'
+    db = 'na'
+    getresults_block = False
+    from_files = False
+    
+    file = open(config_file_path, 'r')
+    for line in file.readlines():
+        if '#' not in line:
+            if 'ip:' in line:
+                ip = line.split(':')[1].strip()
+            elif 'port:' in line:
+                port = line.split(':')[1].strip()
+            elif 'tls:' in line:
+                tls = 'YES' in line.split(':')[1].strip().upper()
+            elif 'auth:' in line:
+                auth = 'YES' in line.split(':')[1].strip().upper()
+            if tls and 'priv:' in line:
+                priv = line.split(':')[1].strip()
+            if tls and 'pub:' in line:
+                pub = line.split(':')[1].strip()
+            if auth and 'id:' in line:
+                id = line.split(':')[1].strip()
+            if auth and 'psswd:' in line:
+                psswd = line.split(':')[1].strip()
+            if 'timeout_seconds' in line:
+                timeout_seconds = int (line.split(':')[1].strip())
+            if 'ansible_path' in line:
+                ansible_path = line.split(':')[1].strip()
+            if 'ansible_inv' in line:
+                ansible_inv = line.split(':')[1].strip()
+                if not os.path.exists(ansible_path + "/" + ansible_inv):
+                    print '[INFO] The ansible_inv file does not exist'
+                    sys.exit(0)
+            if 'ansible_temp' in line:
+                ansible_temp = line.split(':')[1].strip()
+            if 'host' in line:
+                host = line.split(':')[1].strip()
+            if 'user' in line:
+                user = line.split(':')[1].strip()
+            if 'passwd' in line:
+                passwd = line.split(':')[1].strip()
+            if 'db' in line:
+                db = line.split(':')[1].strip()
+            if 'getresults_block' in line:
+                getresults_block = 'YES' in line.split(':')[1].strip().upper()
+            if 'from_files' in line:
+                from_files = 'YES' in line.split(':')[1].strip().upper()
+    file.close()
+
+    # Initialization
+    
+    global_conf = {
+        'global': {
+            'server.socket_host': ip,
+            'server.socket_port': int(port),
+            'server.protocol_version': 'HTTP/1.1'
+            }
+        }
+
+    if tls:
+        # Use pythons built-in SSL
+        cherrypy.server.ssl_module = 'builtin'
+
+        # Point to certificate files
+
+        if not os.path.exists(pub):
+            print '[INFO] The public certificate does not exist'
+            sys.exit(0)
+
+        if not os.path.exists(priv):
+            print '[INFO] The private key does not exist'
+            sys.exit(0)            
+        
+        cherrypy.server.ssl_certificate = pub
+        cherrypy.server.ssl_private_key = priv
+
+    if auth:
+        userpassdict = {id: psswd}
+        checkpassword = cherrypy.lib.auth_basic.checkpassword_dict(userpassdict)
+
+        app_conf = {'/':
+                    {'tools.auth_basic.on': True,
+                     'tools.auth_basic.realm': 'earth',
+                     'tools.auth_basic.checkpassword': checkpassword,
+                     }
+                    }
+
+        cherrypy.tree.mount(TestManager(), '/', app_conf)
+    else:
+        cherrypy.tree.mount(TestManager(), '/')
+        
+    cherrypy.config.update(global_conf)
+
+    # Start server
+    
+    cherrypy.engine.start()
+    cherrypy.engine.block()
diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer_config b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer_config
new file mode 100644
index 000000000..c992939f9
--- /dev/null
+++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/RestServer_config
@@ -0,0 +1,52 @@
+# /*-
+# * ============LICENSE_START=======================================================
+# * APPC
+# * ================================================================================
+# * Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
+# * ================================================================================
+# * Licensed under the Apache License, Version 2.0 (the "License");
+# * you may not use this file except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.apache.org/licenses/LICENSE-2.0
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# * ============LICENSE_END=========================================================
+# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
+# */
+
+# Host definition
+ip:	0.0.0.0 
+port:	8000
+
+# Security (controls use of TLS encrypton and RestServer authentication)
+tls:	no
+auth:	no
+
+# TLS certificates (must be built on application host)
+priv:	provide_privated_key.pem
+pub:	provide_public_key.pem
+
+# RestServer authentication
+id:	provide_RestServer_id
+psswd:	provide_password_4_RestServer_id
+
+# Mysql
+host:	localhost
+user:	mysql_user_id
+passwd:	password_4_mysql_user_id
+db:	ansible
+
+# Playbooks
+from_files:		yes
+ansible_path:		/home/ubuntu/RestServerOpenSource
+ansible_inv:		Ansible_inventory
+ansible_temp:		PlaybooksTemp
+timeout_seconds:	60
+
+# Blocking on GetResults
+getresults_block:	yes
diff --git a/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/ansible_sleep@0.00.yml b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/ansible_sleep@0.00.yml
new file mode 100644
index 000000000..94d120496
--- /dev/null
+++ b/appc-adapters/appc-ansible-adapter/appc-ansible-example-server/ansible_sleep@0.00.yml
@@ -0,0 +1,39 @@
+# /*-
+# * ============LICENSE_START=======================================================
+# * APPC
+# * ================================================================================
+# * Copyright (C) 2017 AT&T Intellectual Property.  All rights reserved.
+# * ================================================================================
+# * Licensed under the Apache License, Version 2.0 (the "License");
+# * you may not use this file except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.apache.org/licenses/LICENSE-2.0
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# * ============LICENSE_END=========================================================
+# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
+# */
+
+- hosts: all
+
+  # Mandatory: 
+  vars:
+      sleep_time: "{{Sleep|default(10)}}"
+
+  tasks:
+
+    - debug:
+        msg: "Sleep time: {{ sleep_time }}"
+
+    - name: sleep
+      shell: sleep {{ sleep_time }}
+
+
+    - debug:
+        msg: "Done"
+