diff options
Diffstat (limited to 'aai-traversal/src/main/scripts/install')
| -rw-r--r-- | aai-traversal/src/main/scripts/install/instutils.sh | 724 | ||||
| -rw-r--r-- | aai-traversal/src/main/scripts/install/siteconf.pl | 100 | ||||
| -rw-r--r-- | aai-traversal/src/main/scripts/install/updateQueryData.sh | 97 |
3 files changed, 921 insertions, 0 deletions
diff --git a/aai-traversal/src/main/scripts/install/instutils.sh b/aai-traversal/src/main/scripts/install/instutils.sh new file mode 100644 index 0000000..a512606 --- /dev/null +++ b/aai-traversal/src/main/scripts/install/instutils.sh @@ -0,0 +1,724 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +ECHO=${ECHO:-echo} + +q_flags="-qq -k$$" + +show_install=${PROJECT_HOME}/install/show_install + +############################################################################ +# checkgroup groupname gid +# checks if group is already in /etc/group and if it has the right gid +# if it's not there, it adds it +# gid can be DC if you don't care +############################################################################ +checkgroup () { + ecode=0 + OFILE=/tmp/group.$$ + getent group "$1" > $OFILE + if [ $? -eq 0 ] + then + CHECKGID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null ) + CHECKGROUPPRESENT=$( grep "^$1:" $OFILE | cut -f1 -d: 2>/dev/null ) + CHECKGROUP=$( grep ":$2:" $OFILE | cut -f1 -d: 2>/dev/null ) + fi + if [ "${CHECKGID}" = "" -a "${CHECKGROUP}" = "" ] + then + ${ECHO} "Adding $1 group ..." + if [ "$2" = "DC" ] + then + groupadd $1 + else + groupadd -g $2 $1 + fi + if [ "$?" != "0" ] + then + ${ECHO} "Cannot add group $1, continuing..." + ecode=1 + fi + else + if [ "${CHECKGROUPPRESENT}" = "$1" ] + then + if [ "$2" != "DC" ] + then + if [ "${CHECKGID}" != "$2" ] + then + ${ECHO} "ERROR: $1 group added but with wrong gid \"${CHECKGID}\"; should be $2" + ecode=1 + fi + if [ "${CHECKGROUP}" != "$1" ] + then + ${ECHO} "ERROR: wrong group \"${CHECKGROUP}\" for gid $2, group should be $1" + ecode=1 + fi + else + ${ECHO} "$1 group has already been added" + fi + fi + fi + rm -f $OFILE + return ${ecode} +} + +############################################################################ +# checkuser username uid homedir shell group +# checks if the username/uid/homedir/shell combo is already in /etc/passwd +# if not, it adds it +# if the login is there and the uid belongs to a different user, it errors +# if the login is there and the shell is not correct, it errors +# uid may be DC for don't care +############################################################################ +checkuser () { + ecode=0 + OFILE=/tmp/user.$$ + getent passwd $1 > $OFILE + if [ $? -eq 0 ] + then + CHECKUID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null ) + CHECKLOGIN=$( grep ":x:$2:" $OFILE | cut -f1 -d: 2>/dev/null ) + CHECKLOGINPRESENT=$( grep "^$1:" $OFILE | cut -f1 -d: 2>/dev/null ) + CHECKSHELL=$( grep "^$1:" $OFILE | cut -f7 -d: 2>/dev/null ) + CHECKHOME=$( grep "^$1:" $OFILE | cut -f6 -d: 2>/dev/null ) + fi + + if [ ! -d $3 ] + then + mkdir -p $3 + if [ "$?" != "0" ] + then + ${ECHO} "mkdir -p $3 failed" + ecode=1 + fi + chmod -R 755 $3 + fi + if [ "${CHECKUID}" = "" -a "${CHECKLOGIN}" = "" ] + then + ${ECHO} "Adding $1 login ..." + if [ "$2" = "DC" ] + then + useradd -g $5 -d $3 -s $4 -c "$1 LOGIN" -m $1 + else + useradd -u $2 -g $5 -d $3 -s $4 -c "$1 LOGIN" -m $1 + fi + if [ "$?" != "0" ] + then + ${ECHO} "Cannot add $1 login, continuing..." + ecode=1 + fi + elif [ "${CHECKLOGINPRESENT}" = "$1" -a "$2" = "DC" -a "${CHECKSHELL}" = "$4" -a "${CHECKHOME}" = "$3" ] + then + ${ECHO} "The '$1' login has already been added to system with UID ${CHECKUID}." + + elif [ "${CHECKUID}" = "$2" -a "${CHECKLOGIN}" = "$1" -a "${CHECKSHELL}" = "$4" -a "${CHECKHOME}" = "$3" ] + then + ${ECHO} "The '$1' login has already been added to system." + else + if [ "$2" != "DC" -a "${CHECKUID}" != "$2" ] + then + ${ECHO} "ERROR: $1 login added but with wrong uid \"${CHECKUID}\"; should be $2" + ecode=1 + fi + if [ "$2" != "DC" -a "${CHECKLOGIN}" != "$1" ] + then + ${ECHO} "ERROR: wrong login \"${CHECKLOGIN}\" for uid $2, login should be $1" + ecode=1 + fi + if [ "${CHECKHOME}" != "$3" ] + then + ${ECHO} "ERROR: wrong home directory \"${CHECKHOME}\" for login $1, should be $3" + ecode=1 + fi + if [ "${CHECKSHELL}" != "$4" ] + then + ${ECHO} "ERROR: $1 login not set up with $4" + ecode=1 + fi + fi + rm -f $OFILE + return ${ecode} +} + +############################################################################ +# checkhome username homedir action +# if the user doesn't exist, it errors +# checks if the username has homedir as its home directory +# if not and action is null, it modifies it +# if not and action is mod, it modifies it +# if not and action is error, it errors +############################################################################ +checkhome () { + ecode=0 + OFILE=/tmp/user.$$ + getent passwd $1 > $OFILE + if [ $? -eq 0 ] + then + CHECKUID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null ) + CHECKGID=$( grep "^$1:" $OFILE | cut -f4 -d: 2>/dev/null ) + CHECKHOME=$( grep "^$1:" $OFILE | cut -f6 -d: 2>/dev/null ) + + if [ "${CHECKHOME}" = "$2" ] + then + if [ ! -d $2 ] + then + mkdir -p $2 + if [ "$?" != "0" ] + then + ${ECHO} "mkdir -p $2 failed" + ecode=1 + fi + chown ${CHECKUID}:${CHECKGID} $2 + chmod -R 755 $2 + fi + else + # modify the user to set the new home dir and move any current home dir to there + usermod -d $2 -m $1 + if [ "$?" != "0" ] + then + ${ECHO} "usermod -d $2 -m $1 failed" + ecode=1 + fi + fi + else + ${ECHO} "user $1 doesn't exist" + ecode=1 + fi + + rm -f $OFILE + return ${ecode} +} + +################################################################## +#checkloginsforpwds checks /etc/shadow for logins without passwords +# the first argument is a list of logins to check +################################################################## +checkloginsforpwds () { + for i in $1 + do + CHECK_LOGIN=$( grep "^${i}:" /etc/shadow | grep "!!" ) + if [ "${CHECK_LOGIN}" != "" ] + then + NOPWD="${NOPWD} ${i}" + fi + done + + if [ "${NOPWD}" != "" ] + then + ${ECHO} "" + ${ECHO} "REMINDER: The following logins must have a passwords assigned to them.\n" + ${ECHO} "##############################################################" + ${ECHO} " ${NOPWD} " + ${ECHO} "##############################################################" + ${ECHO} "" + ${ECHO} " This must be done by executing the following command:" + ${ECHO} "" + ${ECHO} " $ passwd <login>" + ${ECHO} "" + ${ECHO} " After typing the \"passwd\" command you will be prompted for" + ${ECHO} " the password for the login." + ${ECHO} "" + fi +} + +################################################################## +# checkassignpasswords checks /etc/shadow for logins without passwords +# and then asks the user to assign one +# the first argument is a list of logins to check +################################################################## +checkassignpasswords () { + for i in $1 + do + CHECK_LOGIN=$( grep "^${i}:" /etc/shadow | grep LK ) + if [ "${CHECK_LOGIN}" != "" ] + then + ${ECHO} "Please assign a password for the '${i}' login" + passwd ${i} + ${ECHO} + fi + done +} + +############################################################################ +# copywithperms origfile destfile owner group perms [save suffix] +# copies origfile to destfile, giving destfile ownership and permssions +# from owner, group, and perms. If the sixth argument is "save", the +# original is saved in the same place with the seventh argument as the +# suffix. If the seventh arg is null, $$ is used +############################################################################ +copywithperms () { + SAVE=0 + ECODE=0 + if [ "$6" = "save" -a -f "$2" ] + then + if [ "$7" = "" ] + then + cp $2 $2.$$ + else + cp $2 $2.$7 + fi + fi + if [ -f $1 ] + then + cp $1 $2 + ECODE=$? + chown ${3}:${4} $2 + chmod $5 $2 + else + ${ECHO} "$1 is not a file. No copy done!" + fi + return ${ECODE} +} + +############################################################################ +# mkdirwithperms dirname owner group perms ifExist +# makes directory dirname , giving dirname ownership and permssions +# from owner, group, and perms. +# perms can be DC if you don't care +# ifExist can be rm, error, dontcreate +############################################################################ +mkdirwithperms () { + ECODE=0 + if [ -f $1 ] + then + ECODE=1 + ${ECHO} "$1 exists but is a file. No mkdir done!" + elif [ -d $1 ] + then + if [ "$5" = "rm" ] + then + rm -rf $1 + mkdir -p $1 + if [ "$?" != "0" ] + then + ${ECHO} "mkdir -p $1 failed" + ECODE=1 + fi + elif [ "$5" = "error" ] + then + ECODE=1 + ${ECHO} "$1 is a directory. No mkdir done!" + elif [ "$5" != "dontcreate" ] + then + mkdir -p $1 + if [ "$?" != "0" ] + then + ${ECHO} "mkdir -p $1 failed" + ECODE=1 + fi + fi + else + mkdir -p $1 + if [ "$?" != "0" ] + then + ${ECHO} "mkdir -p $1 failed" + ECODE=1 + fi + fi + if [ "${ECODE}" = "0" ] + then + chown ${2}:${3} $1 + if [ "$4" != "DC" ] + then + chmod $4 $1 + fi + fi + return ${ECODE} +} + + +############################################################################ +# chownwithperms owner group file mode +# changes the ownership and mode for the specified file +############################################################################ +chownwithperms () { + chown ${1}:${2} $3 + chmod $4 $3 +} + +verifywhosrunning () { + userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) + if [ "${userid}" != "$1" ] + then + ${ECHO} "You must be $1 to run $0" + exit 1 + fi +} + +replaceline() { + + name=$1 + value=$2 + file=$3 + + if [ -z "${file}" ] + then + ${ECHO} "replaceline: ERROR: insufficient arguments: $1 $2" >&2 + return 1 + fi + + if [ -n "$4" ] + then + ${ECHO} "replaceline: ERROR: too many arguments: $1 $2 $3 $4" >&2 + return 1 + fi + + if [ -f ${file} ] + then + grep -v "^${name}=" ${file} > ${file}.$$ + ${ECHO} "${name}=${value}" >> ${file}.$$ + mv -f ${file}.$$ ${file} + else + ${ECHO} "${name}=${value}" > ${file} + fi +} + +replaceline_with_quotes() { + + name=$1 + value=$2 + file=$3 + + if [ -z "${file}" ] + then + ${ECHO} "replaceline: ERROR: insufficient arguments: $1 $2" >&2 + return 1 + fi + + if [ -n "$4" ] + then + ${ECHO} "replaceline: ERROR: too many arguments: $1 $2 $3 $4" >&2 + return 1 + fi + + if [ -f ${file} ] + then + grep -v "^${name}=" ${file} > ${file}.$$ + ${ECHO} "${name}=\"${value}\"" >> ${file}.$$ + mv -f ${file}.$$ ${file} + else + ${ECHO} "${name}=\"${value}\"" > ${file} + fi +} + +# this deleteline will not actually delete the entry +# but only delete the value leaving the name= +# when siteconf.pl went from Boilerplate to Fillin, +# we changed this because Fillin can handle null values. + +deleteline() { + + name=$1 + file=$2 + + if [ -z "${file}" ] + then + ${ECHO} "deleteline: ERROR: insufficient arguments" >&2 + return 1 + fi + + if [ -f ${file} ] + then + cp ${file} ${file}.$$ + lno=$( grep -n "^${name}=" ${file} | cut -d: -f1 ) + if [ "${lno}" != "" ] + then + sed "${lno}d" ${file} > ${file}.$$ + fi + ${ECHO} "${name}=" >> ${file}.$$ + mv -f ${file}.$$ ${file} + else + ${ECHO} "${name}=" > ${file} + fi +} + +# dropline will drop the line from the file +# unlike the deleteline function above + +dropline() { + + name=$1 + file=$2 + + if [ -z "${file}" ] + then + ${ECHO} "dropline: ERROR: insufficient arguments" >&2 + return 1 + fi + + if [ -f ${file} ] + then + grep -v "^${name}=" ${file} > ${file}.$$ + mv -f ${file}.$$ ${file} + fi +} + +pause_install() { + + if [ "${Pause}" = "1" ] + then + if ${chkyn} -y "Continue with ${Itype}?" + then + return 0 + else + ${ECHO} "${PNAME}: quitting" >&2 + exit 1 + fi + fi +} + +get_ITYPE() { + ITYPE=$( ${chkyn} -fer ${q_flags} -h\? ${ITYPE:+-D"${ITYPE}"} -H \ +" If you are doing a fresh install, answer 'I' or answer 'U' for upgrade." \ +"Is this a fresh 'install' or 'upgrade' (I or U):${ITYPE:+ [${ITYPE}]}" \ + '^[IU]$' \ +'*** ERROR *** Entry must be I or U.' ) +} + + +### +# Change an /etc/group entry to allow a give user to change group into it. +# arg1 = comma-sep group list (e.g., sylantro,other) +# arg2 = user +### +addUserToGroup() +{ + if [ -z "$1" -o -z "$2" ] + then + ${ECHO} "addUserToGroup failed, need two args, group and user" + return 1 + else + usermod -G $1 $2 + fi + return 0 +} + +################### BACKUP AND RESTORE METHODS ######################## +################### VARIABLES ########################## +################### VARIABLES ########################## +################### VARIABLES ########################## +################### VARIABLES ########################## + +NO_FILE_INDICATOR="__NO_PREVIOUS_FILE__" +SAVE_SUFFIX=${Project}save + +################### SUBROUTINES ########################## +################### SUBROUTINES ########################## +################### SUBROUTINES ########################## +################### SUBROUTINES ########################## +################### SUBROUTINES ########################## + +############################################################################## +# Purpose: make a backup copy of a file in such a way that the backup +# won't be lost by re-running your script PLUS give you a predictable name +# for the most recent back up to use when you roll back. +# +# Input: +# - Arg1 = file to back up +# +# Requirement: +# - Remove $1.save before calling this function or else a copy won't be made. +# - Make sure to set the value of env value TODAY to use as a suffix. +# +# Description: +# Copy $1 to $1.${SAVE_SUFFIX}.${TODAY}, then link that to $1.save. +# +############################################################################## +make_backup_copy () +{ + if [ -z "${TODAY}" ] + then + ${ECHO} "make_backup_copy - TODAY variable is unset" >&2 + return 1 + fi + + if [ -f $1.${SAVE_SUFFIX}.${TODAY} -a -h $1.save ] + then + ${ECHO} "Note: backup already exists for $1" + else + # if existing file doesn't exist, set up for later delete by rollback + if [ ! -f $1 -a ! -h $1 ] + then + ${ECHO} ${NO_FILE_INDICATOR} > $1 + fi + cp -p $1 $1.${SAVE_SUFFIX}.${TODAY} + ln -s $1.${SAVE_SUFFIX}.${TODAY} $1.save + fi +} + +################################################################################ +# Purpose: Find the actual file that belongs to $1, which can be a symbolic +# link. +# +# Input: +# - Arg1 = path to file or link +# - Arg2 = true if you want _SRCFILE to be null if no actual file is +# found. If Arg2 is NOT true, then _SRCFILE is set to Arg1. +# +# Side Effect: +# Sets value of _SRCFILE variable +################################################################################ +find_source_file () +{ + if [ -z "$1" ] + then + ${ECHO} "find_source_file - needs at least one argument" >&2 + return 1 + fi + + ls -l $1 > /tmp/tls$$ + cat /tmp/tls$$ | sed 's/ */ /g' |cut -f11 > /tmp/cuts$$ + _SRCFILE=$( cat /tmp/cuts$$ ) + + if [ "$_SRCFILE" = "" ] + then + if [ "$2" != "true" ] + then + _SRCFILE=$1 + fi + fi + rm -f /tmp/tls$$ /tmp/cuts$$ +} + +####################################################################### +# Purpose: Expands template file using data in COPT variable. +# Diffs expanded template against existing file and installs if different. +# If arg5 = true, sets _config_changes=1 so you know that changes were installed +# +# Makes its own backup copy using make_backup_copy. +# Does install if different using install_if_different. +# +# Input: +# Arg1 = template path without .tmpl extension +# Arg2 = install path +# Arg3 = owner and group (e.g., root:other) +# Arg4 = permissions (e.g., 750) +# Arg5 = true/false, if expanded file is different than installed . +# Set _config_changes to 1 if Arg5 is true. Otherwise, don't touch +# _config_changes +# +# Requirement: set COPT to the value of the -c option to siteconf.pl +# +# Side Effect: sets _config_changes=1 if changes were installed +####################################################################### +install_from_template () +{ + if [ -z "${COPT}" ] + then + ${ECHO} "install_from_template - COPT is unset" >&2 + return 1 + fi + + TMPL=$( basename ${1} ) + OFILE=/tmp/${TMPL} + if [ -f ${1}.tmpl ] + then + + ${PROJECT_HOME}/bin/siteconf.pl -t ${1}.tmpl -c ${COPT} -o ${OFILE} + install_if_different ${OFILE} ${2} ${3} ${4} ${5} + + else + ${ECHO} "install_from_template: ERROR: Missing ${TMPL}.tmpl" >&2 + fi + rm -f ${OFILE} +} + + +####################################################################### +# Purpose: Copies source to destination if the two are different. +# If arg5 = true, sets _config_changes=1 so you know that changes were installed +# +# Makes its own backup copy using make_backup_copy. +# +# Input: +# Arg1 = source path +# Arg2 = install path +# Arg3 = owner and group (e.g., root:other) +# Arg4 = permissions (e.g., 750) +# Arg5 = true/false, if expanded file is different than installed . +# Set _config_changes to 1 if Arg5 is true. Otherwise, don't touch +# _config_changes +# +# Side Effect: sets _config_changes=1 if changes were installed +####################################################################### +install_if_different() +{ + # Take backup before changing. + # Only change if different. + if [ -f ${2} ] + then + diff ${1} ${2} > /dev/null + diffrc=$? + if [ "${diffrc}" != "0" ] + then + ${ECHO} "Installing ${2}" + make_backup_copy ${2} + mv -f ${1} ${2} + chown ${3} ${2} + chmod ${4} ${2} + if [ "${5}" = "true" ] + then + _config_changes=1 + fi + fi + else + # creates backup containing ${NO_FILE_INDICATOR} for rollback removal + make_backup_copy ${2} + mv -f ${1} ${2} + chown ${3} ${2} + chmod ${4} ${2} + if [ "${5}" = "true" ] + then + _config_changes=1 + fi + fi +} +################################################################### +# Purpose: rollback a file whose backup was made with make_backup_copy +# +# Input: +# Arg1 is path of installed file. Subroutine will look for ${1}.save +# Arg2 = true/false, if expanded file is different than installed, +# set _config_changes to 1 if Arg2 is true. Otherwise, don't touch +# _config_changes +# +# Side Effect: sets _config_changes=1 if changes were rolled back +################################################################### +rollback_from_save () +{ + if [ -f ${1}.save -o -h ${1}.save ] + then + find_source_file ${1}.save false + ${ECHO} "rollback_from_save: rolling back to $( basename ${_SRCFILE} )" + grep ${NO_FILE_INDICATOR} ${_SRCFILE} > /dev/null + if [ $? -eq 0 ] + then + rm -f ${_SRCFILE} ${1} + else + mv -f ${_SRCFILE} ${1} + fi + if [ "${2}" = "true" ] + then + _config_changes=1 + fi + rm -f ${1}.save + fi +} diff --git a/aai-traversal/src/main/scripts/install/siteconf.pl b/aai-traversal/src/main/scripts/install/siteconf.pl new file mode 100644 index 0000000..d035851 --- /dev/null +++ b/aai-traversal/src/main/scripts/install/siteconf.pl @@ -0,0 +1,100 @@ +#!/usr/bin/perl +# CC_ID_SITECONF_PL[] = "@(#)/vobs/waas/src/oam/siteconf.pl@@/main/4" + +#.Description +# This perl script takes as input template file, +# and one or more configuration files. It uses the values in the +# configuration files as substitutions for the matching tags in the template +# file. + +#.Constraints +# The input files must be readable by the script. + +#.See Also +# + +use Getopt::Std; + +local $dbg=0; + +getopts ('dt:c:'); + +if ($opt_d) { + $dbg=$opt_d; +} + +if ($dbg) { + print STDERR "opt_d=$opt_d\n"; + print STDERR "opt_t=$opt_t\n"; + print STDERR "opt_c=$opt_c\n"; +} + +### +# Print usage if no arguments passed +if (! $opt_t) { + print STDERR "Usage: $0 -t templatefile -c configfilelist\n"; + exit (1); +} + +# process the template file variable +if ($opt_t) { + if (! -r $opt_t) { + print STDERR "Error: Can't read template file $opt_t\n"; + exit (2); + } + $templatefile = $opt_t; +} +else { + print STDERR "Error: You must enter the template file name\n"; + exit (2); +} + +### +# Global error flag for return code when exiting +$err = 0; + +$configlist = ''; +if ($opt_c) { + $configlist = $opt_c; +} + +# process the site configuration file variable +if ($configlist) { + @siteary = split /,/, $configlist; +} + +# Add PROJECT_HOME to Conf dictionary +$Conf{'PROJECT_HOME'} = $ENV{'PROJECT_HOME'}; + +foreach $arg (@siteary) { + if ($dbg) { print STDERR "Opening $arg\n" } + + open(CONF, $arg) || die $!, ", '$arg'\n"; + + while (<CONF>) { + #1 while chomp(); + $_ =~ s/[\r\n]$//g; # strip newlines and dos-injected carriage returns + if ( /=/ ) { + ($attr,$value) = split(/=/,$_,2); + $value =~ s/\$PHOME/$ENV{'PROJECT_HOME'}/; + $value =~ s/\$PROJECT_HOME/$ENV{'PROJECT_HOME'}/; + $Conf{$attr} = $value; + } + } + + close CONF; +} + +if ($dbg) { print STDERR "Expanding $templatefile\n" } + +# Expand a config file + +open(TEMPLATE, $templatefile) || die $!, ", '$templatefile'\n"; +while (<TEMPLATE>) { + # handle strings such as @HTTP_ROOT@@HTTP_PORT@ + s/@(\w+)@/$Conf{$1}/g; + print; +} + +close TEMPLATE; + diff --git a/aai-traversal/src/main/scripts/install/updateQueryData.sh b/aai-traversal/src/main/scripts/install/updateQueryData.sh new file mode 100644 index 0000000..798d5b8 --- /dev/null +++ b/aai-traversal/src/main/scripts/install/updateQueryData.sh @@ -0,0 +1,97 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +PROGNAME=$(basename $0) +PROJECT_HOME=/opt/app/aai-traversal +OUTFILE=$PROJECT_HOME/logs/misc/${PROGNAME}.log.$(date +\%Y-\%m-\%d) + +TS=$(date "+%Y-%m-%d %H:%M:%S") + +CHECK_USER="aaiadmin" +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != $CHECK_USER ]; then + echo "You must be $CHECK_USER to run $0. The id used $userid." + exit 1 +fi + +error_exit () { + echo "${PROGNAME}: failed for ${1:-"Unknown error"} on cmd $2" 1>&2 + echo "${PROGNAME}: failed for ${1:-"Unknown error"} on cmd $2" >> $OUTFILE +# exit ${2:-"1"} +} + +j=0 +for filepath in `ls $PROJECT_HOME/bundleconfig/etc/scriptdata/widget-model-json/*.json|sort -f` +do +j=$(expr "$j" + 1) +filename=$(basename $filepath) +echo "Begin putTool for widget $filename" | tee -a $OUTFILE +vers=`grep model-invariant-id $filepath|cut -d':' -f2|cut -d'"' -f2` +# last parameter will skip put if it exists +resource=service-design-and-creation/models/model/$vers +$PROJECT_HOME/scripts/putTool.sh $resource $filepath 412 >> $OUTFILE 2>&1 || error_exit "$resource $filepath" $j +echo "End putTool for widget $filename" | tee -a $OUTFILE +done + +j=0 +for filepath in `ls $PROJECT_HOME/bundleconfig/etc/scriptdata/named-query-json/*.json|sort -f` +do +j=$(expr "$j" + 1) +filename=$(basename $filepath) +echo "Begin putTool for named-query $filename" | tee -a $OUTFILE +vers=`grep named-query-uuid $filepath|cut -d':' -f2|cut -d'"' -f2` +# last parameter will skip put if it exists +resource=service-design-and-creation/named-queries/named-query/$vers +$PROJECT_HOME/scripts/putTool.sh $resource $filepath 412 >> $OUTFILE 2>&1 || error_exit "$resource $filepath" $j +echo "End putTool for named-query $filename" | tee -a $OUTFILE +done + +j=0 +for filepath in `ls $PROJECT_HOME/bundleconfig/etc/scriptdata/resource-model-json/*.json|sort -f` +do +j=$(expr "$j" + 1) +filename=$(basename $filepath) +echo "Begin putTool for resource model $filename" | tee -a $OUTFILE +vers=`grep model-invariant-id $filepath|cut -d':' -f2|cut -d'"' -f2` +# last parameter will skip put if it exists +resource=service-design-and-creation/models/model/$vers +$PROJECT_HOME/scripts/putTool.sh $resource $filepath 412 >> $OUTFILE 2>&1 || error_exit "$resource $filepath" $j +echo "End putTool for resource model $filename" | tee -a $OUTFILE +done + +j=0 +for filepath in `ls $PROJECT_HOME/bundleconfig/etc/scriptdata/service-model-json/*.json|sort -f` +do +j=$(expr "$j" + 1) +filename=$(basename $filepath) +echo "Begin putTool for service model $filename" | tee -a $OUTFILE +vers=`grep model-invariant-id $filepath|cut -d':' -f2|cut -d'"' -f2` +# last parameter will skip put if it exists +resource=service-design-and-creation/models/model/$vers +$PROJECT_HOME/scripts/putTool.sh $resource $filepath 412 >> $OUTFILE 2>&1 || error_exit "$resource $filepath" $j +echo "End putTool for service model $filename" | tee -a $OUTFILE +done + +echo "$PROGNAME completed ${TS}" | tee -a $OUTFILE +echo "See output and error file: $OUTFILE" + +exit 0 |