summaryrefslogtreecommitdiffstats
path: root/aai-traversal/src/main/scripts/install
diff options
context:
space:
mode:
Diffstat (limited to 'aai-traversal/src/main/scripts/install')
-rw-r--r--aai-traversal/src/main/scripts/install/instutils.sh725
1 files changed, 0 insertions, 725 deletions
diff --git a/aai-traversal/src/main/scripts/install/instutils.sh b/aai-traversal/src/main/scripts/install/instutils.sh
deleted file mode 100644
index ab94a9c..0000000
--- a/aai-traversal/src/main/scripts/install/instutils.sh
+++ /dev/null
@@ -1,725 +0,0 @@
-#!/bin/ksh
-#
-# ============LICENSE_START=======================================================
-# org.onap.aai
-# ================================================================================
-# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-
-ECHO=${ECHO:-echo}
-
-q_flags="-qq -k$$"
-
-show_install=${PROJECT_HOME}/install/show_install
-
-############################################################################
-# checkgroup groupname gid
-# checks if group is already in /etc/group and if it has the right gid
-# if it's not there, it adds it
-# gid can be DC if you don't care
-############################################################################
-checkgroup () {
- ecode=0
- OFILE=/tmp/group.$$
- getent group "$1" > $OFILE
- if [ $? -eq 0 ]
- then
- CHECKGID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
- CHECKGROUPPRESENT=$( grep "^$1:" $OFILE | cut -f1 -d: 2>/dev/null )
- CHECKGROUP=$( grep ":$2:" $OFILE | cut -f1 -d: 2>/dev/null )
- fi
- if [ "${CHECKGID}" = "" -a "${CHECKGROUP}" = "" ]
- then
- ${ECHO} "Adding $1 group ..."
- if [ "$2" = "DC" ]
- then
- groupadd $1
- else
- groupadd -g $2 $1
- fi
- if [ "$?" != "0" ]
- then
- ${ECHO} "Cannot add group $1, continuing..."
- ecode=1
- fi
- else
- if [ "${CHECKGROUPPRESENT}" = "$1" ]
- then
- if [ "$2" != "DC" ]
- then
- if [ "${CHECKGID}" != "$2" ]
- then
- ${ECHO} "ERROR: $1 group added but with wrong gid \"${CHECKGID}\"; should be $2"
- ecode=1
- fi
- if [ "${CHECKGROUP}" != "$1" ]
- then
- ${ECHO} "ERROR: wrong group \"${CHECKGROUP}\" for gid $2, group should be $1"
- ecode=1
- fi
- else
- ${ECHO} "$1 group has already been added"
- fi
- fi
- fi
- rm -f $OFILE
- return ${ecode}
-}
-
-############################################################################
-# checkuser username uid homedir shell group
-# checks if the username/uid/homedir/shell combo is already in /etc/passwd
-# if not, it adds it
-# if the login is there and the uid belongs to a different user, it errors
-# if the login is there and the shell is not correct, it errors
-# uid may be DC for don't care
-############################################################################
-checkuser () {
- ecode=0
- OFILE=/tmp/user.$$
- getent passwd $1 > $OFILE
- if [ $? -eq 0 ]
- then
- CHECKUID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
- CHECKLOGIN=$( grep ":x:$2:" $OFILE | cut -f1 -d: 2>/dev/null )
- CHECKLOGINPRESENT=$( grep "^$1:" $OFILE | cut -f1 -d: 2>/dev/null )
- CHECKSHELL=$( grep "^$1:" $OFILE | cut -f7 -d: 2>/dev/null )
- CHECKHOME=$( grep "^$1:" $OFILE | cut -f6 -d: 2>/dev/null )
- fi
-
- if [ ! -d $3 ]
- then
- mkdir -p $3
- if [ "$?" != "0" ]
- then
- ${ECHO} "mkdir -p $3 failed"
- ecode=1
- fi
- chmod -R 755 $3
- fi
- if [ "${CHECKUID}" = "" -a "${CHECKLOGIN}" = "" ]
- then
- ${ECHO} "Adding $1 login ..."
- if [ "$2" = "DC" ]
- then
- useradd -g $5 -d $3 -s $4 -c "$1 LOGIN" -m $1
- else
- useradd -u $2 -g $5 -d $3 -s $4 -c "$1 LOGIN" -m $1
- fi
- if [ "$?" != "0" ]
- then
- ${ECHO} "Cannot add $1 login, continuing..."
- ecode=1
- fi
- elif [ "${CHECKLOGINPRESENT}" = "$1" -a "$2" = "DC" -a "${CHECKSHELL}" = "$4" -a "${CHECKHOME}" = "$3" ]
- then
- ${ECHO} "The '$1' login has already been added to system with UID ${CHECKUID}."
-
- elif [ "${CHECKUID}" = "$2" -a "${CHECKLOGIN}" = "$1" -a "${CHECKSHELL}" = "$4" -a "${CHECKHOME}" = "$3" ]
- then
- ${ECHO} "The '$1' login has already been added to system."
- else
- if [ "$2" != "DC" -a "${CHECKUID}" != "$2" ]
- then
- ${ECHO} "ERROR: $1 login added but with wrong uid \"${CHECKUID}\"; should be $2"
- ecode=1
- fi
- if [ "$2" != "DC" -a "${CHECKLOGIN}" != "$1" ]
- then
- ${ECHO} "ERROR: wrong login \"${CHECKLOGIN}\" for uid $2, login should be $1"
- ecode=1
- fi
- if [ "${CHECKHOME}" != "$3" ]
- then
- ${ECHO} "ERROR: wrong home directory \"${CHECKHOME}\" for login $1, should be $3"
- ecode=1
- fi
- if [ "${CHECKSHELL}" != "$4" ]
- then
- ${ECHO} "ERROR: $1 login not set up with $4"
- ecode=1
- fi
- fi
- rm -f $OFILE
- return ${ecode}
-}
-
-############################################################################
-# checkhome username homedir action
-# if the user doesn't exist, it errors
-# checks if the username has homedir as its home directory
-# if not and action is null, it modifies it
-# if not and action is mod, it modifies it
-# if not and action is error, it errors
-############################################################################
-checkhome () {
- ecode=0
- OFILE=/tmp/user.$$
- getent passwd $1 > $OFILE
- if [ $? -eq 0 ]
- then
- CHECKUID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
- CHECKGID=$( grep "^$1:" $OFILE | cut -f4 -d: 2>/dev/null )
- CHECKHOME=$( grep "^$1:" $OFILE | cut -f6 -d: 2>/dev/null )
-
- if [ "${CHECKHOME}" = "$2" ]
- then
- if [ ! -d $2 ]
- then
- mkdir -p $2
- if [ "$?" != "0" ]
- then
- ${ECHO} "mkdir -p $2 failed"
- ecode=1
- fi
- chown ${CHECKUID}:${CHECKGID} $2
- chmod -R 755 $2
- fi
- else
- # modify the user to set the new home dir and move any current home dir to there
- usermod -d $2 -m $1
- if [ "$?" != "0" ]
- then
- ${ECHO} "usermod -d $2 -m $1 failed"
- ecode=1
- fi
- fi
- else
- ${ECHO} "user $1 doesn't exist"
- ecode=1
- fi
-
- rm -f $OFILE
- return ${ecode}
-}
-
-##################################################################
-#checkloginsforpwds checks /etc/shadow for logins without passwords
-# the first argument is a list of logins to check
-##################################################################
-checkloginsforpwds () {
- for i in $1
- do
- CHECK_LOGIN=$( grep "^${i}:" /etc/shadow | grep "!!" )
- if [ "${CHECK_LOGIN}" != "" ]
- then
- NOPWD="${NOPWD} ${i}"
- fi
- done
-
- if [ "${NOPWD}" != "" ]
- then
- ${ECHO} ""
- ${ECHO} "REMINDER: The following logins must have a passwords assigned to them.\n"
- ${ECHO} "##############################################################"
- ${ECHO} " ${NOPWD} "
- ${ECHO} "##############################################################"
- ${ECHO} ""
- ${ECHO} " This must be done by executing the following command:"
- ${ECHO} ""
- ${ECHO} " $ passwd <login>"
- ${ECHO} ""
- ${ECHO} " After typing the \"passwd\" command you will be prompted for"
- ${ECHO} " the password for the login."
- ${ECHO} ""
- fi
-}
-
-##################################################################
-# checkassignpasswords checks /etc/shadow for logins without passwords
-# and then asks the user to assign one
-# the first argument is a list of logins to check
-##################################################################
-checkassignpasswords () {
- for i in $1
- do
- CHECK_LOGIN=$( grep "^${i}:" /etc/shadow | grep LK )
- if [ "${CHECK_LOGIN}" != "" ]
- then
- ${ECHO} "Please assign a password for the '${i}' login"
- passwd ${i}
- ${ECHO}
- fi
- done
-}
-
-############################################################################
-# copywithperms origfile destfile owner group perms [save suffix]
-# copies origfile to destfile, giving destfile ownership and permssions
-# from owner, group, and perms. If the sixth argument is "save", the
-# original is saved in the same place with the seventh argument as the
-# suffix. If the seventh arg is null, $$ is used
-############################################################################
-copywithperms () {
- SAVE=0
- ECODE=0
- if [ "$6" = "save" -a -f "$2" ]
- then
- if [ "$7" = "" ]
- then
- cp $2 $2.$$
- else
- cp $2 $2.$7
- fi
- fi
- if [ -f $1 ]
- then
- cp $1 $2
- ECODE=$?
- chown ${3}:${4} $2
- chmod $5 $2
- else
- ${ECHO} "$1 is not a file. No copy done!"
- fi
- return ${ECODE}
-}
-
-############################################################################
-# mkdirwithperms dirname owner group perms ifExist
-# makes directory dirname , giving dirname ownership and permssions
-# from owner, group, and perms.
-# perms can be DC if you don't care
-# ifExist can be rm, error, dontcreate
-############################################################################
-mkdirwithperms () {
- ECODE=0
- if [ -f $1 ]
- then
- ECODE=1
- ${ECHO} "$1 exists but is a file. No mkdir done!"
- elif [ -d $1 ]
- then
- if [ "$5" = "rm" ]
- then
- rm -rf $1
- mkdir -p $1
- if [ "$?" != "0" ]
- then
- ${ECHO} "mkdir -p $1 failed"
- ECODE=1
- fi
- elif [ "$5" = "error" ]
- then
- ECODE=1
- ${ECHO} "$1 is a directory. No mkdir done!"
- elif [ "$5" != "dontcreate" ]
- then
- mkdir -p $1
- if [ "$?" != "0" ]
- then
- ${ECHO} "mkdir -p $1 failed"
- ECODE=1
- fi
- fi
- else
- mkdir -p $1
- if [ "$?" != "0" ]
- then
- ${ECHO} "mkdir -p $1 failed"
- ECODE=1
- fi
- fi
- if [ "${ECODE}" = "0" ]
- then
- chown ${2}:${3} $1
- if [ "$4" != "DC" ]
- then
- chmod $4 $1
- fi
- fi
- return ${ECODE}
-}
-
-
-############################################################################
-# chownwithperms owner group file mode
-# changes the ownership and mode for the specified file
-############################################################################
-chownwithperms () {
- chown ${1}:${2} $3
- chmod $4 $3
-}
-
-verifywhosrunning () {
- userid=$( id | cut -f2 -d"(" | cut -f1 -d")" )
- if [ "${userid}" != "$1" ]
- then
- ${ECHO} "You must be $1 to run $0"
- exit 1
- fi
-}
-
-replaceline() {
-
- name=$1
- value=$2
- file=$3
-
- if [ -z "${file}" ]
- then
- ${ECHO} "replaceline: ERROR: insufficient arguments: $1 $2" >&2
- return 1
- fi
-
- if [ -n "$4" ]
- then
- ${ECHO} "replaceline: ERROR: too many arguments: $1 $2 $3 $4" >&2
- return 1
- fi
-
- if [ -f ${file} ]
- then
- grep -v "^${name}=" ${file} > ${file}.$$
- ${ECHO} "${name}=${value}" >> ${file}.$$
- mv -f ${file}.$$ ${file}
- else
- ${ECHO} "${name}=${value}" > ${file}
- fi
-}
-
-replaceline_with_quotes() {
-
- name=$1
- value=$2
- file=$3
-
- if [ -z "${file}" ]
- then
- ${ECHO} "replaceline: ERROR: insufficient arguments: $1 $2" >&2
- return 1
- fi
-
- if [ -n "$4" ]
- then
- ${ECHO} "replaceline: ERROR: too many arguments: $1 $2 $3 $4" >&2
- return 1
- fi
-
- if [ -f ${file} ]
- then
- grep -v "^${name}=" ${file} > ${file}.$$
- ${ECHO} "${name}=\"${value}\"" >> ${file}.$$
- mv -f ${file}.$$ ${file}
- else
- ${ECHO} "${name}=\"${value}\"" > ${file}
- fi
-}
-
-# this deleteline will not actually delete the entry
-# but only delete the value leaving the name=
-# when siteconf.pl went from Boilerplate to Fillin,
-# we changed this because Fillin can handle null values.
-
-deleteline() {
-
- name=$1
- file=$2
-
- if [ -z "${file}" ]
- then
- ${ECHO} "deleteline: ERROR: insufficient arguments" >&2
- return 1
- fi
-
- if [ -f ${file} ]
- then
- cp ${file} ${file}.$$
- lno=$( grep -n "^${name}=" ${file} | cut -d: -f1 )
- if [ "${lno}" != "" ]
- then
- sed "${lno}d" ${file} > ${file}.$$
- fi
- ${ECHO} "${name}=" >> ${file}.$$
- mv -f ${file}.$$ ${file}
- else
- ${ECHO} "${name}=" > ${file}
- fi
-}
-
-# dropline will drop the line from the file
-# unlike the deleteline function above
-
-dropline() {
-
- name=$1
- file=$2
-
- if [ -z "${file}" ]
- then
- ${ECHO} "dropline: ERROR: insufficient arguments" >&2
- return 1
- fi
-
- if [ -f ${file} ]
- then
- grep -v "^${name}=" ${file} > ${file}.$$
- mv -f ${file}.$$ ${file}
- fi
-}
-
-pause_install() {
-
- if [ "${Pause}" = "1" ]
- then
- if ${chkyn} -y "Continue with ${Itype}?"
- then
- return 0
- else
- ${ECHO} "${PNAME}: quitting" >&2
- exit 1
- fi
- fi
-}
-
-get_ITYPE() {
- ITYPE=$( ${chkyn} -fer ${q_flags} -h\? ${ITYPE:+-D"${ITYPE}"} -H \
-" If you are doing a fresh install, answer 'I' or answer 'U' for upgrade." \
-"Is this a fresh 'install' or 'upgrade' (I or U):${ITYPE:+ [${ITYPE}]}" \
- '^[IU]$' \
-'*** ERROR *** Entry must be I or U.' )
-}
-
-
-###
-# Change an /etc/group entry to allow a give user to change group into it.
-# arg1 = comma-sep group list (e.g., sylantro,other)
-# arg2 = user
-###
-addUserToGroup()
-{
- if [ -z "$1" -o -z "$2" ]
- then
- ${ECHO} "addUserToGroup failed, need two args, group and user"
- return 1
- else
- usermod -G $1 $2
- fi
- return 0
-}
-
-################### BACKUP AND RESTORE METHODS ########################
-################### VARIABLES ##########################
-################### VARIABLES ##########################
-################### VARIABLES ##########################
-################### VARIABLES ##########################
-
-NO_FILE_INDICATOR="__NO_PREVIOUS_FILE__"
-SAVE_SUFFIX=${Project}save
-
-################### SUBROUTINES ##########################
-################### SUBROUTINES ##########################
-################### SUBROUTINES ##########################
-################### SUBROUTINES ##########################
-################### SUBROUTINES ##########################
-
-##############################################################################
-# Purpose: make a backup copy of a file in such a way that the backup
-# won't be lost by re-running your script PLUS give you a predictable name
-# for the most recent back up to use when you roll back.
-#
-# Input:
-# - Arg1 = file to back up
-#
-# Requirement:
-# - Remove $1.save before calling this function or else a copy won't be made.
-# - Make sure to set the value of env value TODAY to use as a suffix.
-#
-# Description:
-# Copy $1 to $1.${SAVE_SUFFIX}.${TODAY}, then link that to $1.save.
-#
-##############################################################################
-make_backup_copy ()
-{
- if [ -z "${TODAY}" ]
- then
- ${ECHO} "make_backup_copy - TODAY variable is unset" >&2
- return 1
- fi
-
- if [ -f $1.${SAVE_SUFFIX}.${TODAY} -a -h $1.save ]
- then
- ${ECHO} "Note: backup already exists for $1"
- else
- # if existing file doesn't exist, set up for later delete by rollback
- if [ ! -f $1 -a ! -h $1 ]
- then
- ${ECHO} ${NO_FILE_INDICATOR} > $1
- fi
- cp -p $1 $1.${SAVE_SUFFIX}.${TODAY}
- ln -s $1.${SAVE_SUFFIX}.${TODAY} $1.save
- fi
-}
-
-################################################################################
-# Purpose: Find the actual file that belongs to $1, which can be a symbolic
-# link.
-#
-# Input:
-# - Arg1 = path to file or link
-# - Arg2 = true if you want _SRCFILE to be null if no actual file is
-# found. If Arg2 is NOT true, then _SRCFILE is set to Arg1.
-#
-# Side Effect:
-# Sets value of _SRCFILE variable
-################################################################################
-find_source_file ()
-{
- if [ -z "$1" ]
- then
- ${ECHO} "find_source_file - needs at least one argument" >&2
- return 1
- fi
-
- ls -l $1 > /tmp/tls$$
- cat /tmp/tls$$ | sed 's/ */ /g' |cut -f11 > /tmp/cuts$$
- _SRCFILE=$( cat /tmp/cuts$$ )
-
- if [ "$_SRCFILE" = "" ]
- then
- if [ "$2" != "true" ]
- then
- _SRCFILE=$1
- fi
- fi
- rm -f /tmp/tls$$ /tmp/cuts$$
-}
-
-#######################################################################
-# Purpose: Expands template file using data in COPT variable.
-# Diffs expanded template against existing file and installs if different.
-# If arg5 = true, sets _config_changes=1 so you know that changes were installed
-#
-# Makes its own backup copy using make_backup_copy.
-# Does install if different using install_if_different.
-#
-# Input:
-# Arg1 = template path without .tmpl extension
-# Arg2 = install path
-# Arg3 = owner and group (e.g., root:other)
-# Arg4 = permissions (e.g., 750)
-# Arg5 = true/false, if expanded file is different than installed .
-# Set _config_changes to 1 if Arg5 is true. Otherwise, don't touch
-# _config_changes
-#
-# Requirement: set COPT to the value of the -c option to siteconf.pl
-#
-# Side Effect: sets _config_changes=1 if changes were installed
-#######################################################################
-install_from_template ()
-{
- if [ -z "${COPT}" ]
- then
- ${ECHO} "install_from_template - COPT is unset" >&2
- return 1
- fi
-
- TMPL=$( basename ${1} )
- OFILE=/tmp/${TMPL}
- if [ -f ${1}.tmpl ]
- then
-
- ${PROJECT_HOME}/bin/siteconf.pl -t ${1}.tmpl -c ${COPT} -o ${OFILE}
- install_if_different ${OFILE} ${2} ${3} ${4} ${5}
-
- else
- ${ECHO} "install_from_template: ERROR: Missing ${TMPL}.tmpl" >&2
- fi
- rm -f ${OFILE}
-}
-
-
-#######################################################################
-# Purpose: Copies source to destination if the two are different.
-# If arg5 = true, sets _config_changes=1 so you know that changes were installed
-#
-# Makes its own backup copy using make_backup_copy.
-#
-# Input:
-# Arg1 = source path
-# Arg2 = install path
-# Arg3 = owner and group (e.g., root:other)
-# Arg4 = permissions (e.g., 750)
-# Arg5 = true/false, if expanded file is different than installed .
-# Set _config_changes to 1 if Arg5 is true. Otherwise, don't touch
-# _config_changes
-#
-# Side Effect: sets _config_changes=1 if changes were installed
-#######################################################################
-install_if_different()
-{
- # Take backup before changing.
- # Only change if different.
- if [ -f ${2} ]
- then
- diff ${1} ${2} > /dev/null
- diffrc=$?
- if [ "${diffrc}" != "0" ]
- then
- ${ECHO} "Installing ${2}"
- make_backup_copy ${2}
- mv -f ${1} ${2}
- chown ${3} ${2}
- chmod ${4} ${2}
- if [ "${5}" = "true" ]
- then
- _config_changes=1
- fi
- fi
- else
- # creates backup containing ${NO_FILE_INDICATOR} for rollback removal
- make_backup_copy ${2}
- mv -f ${1} ${2}
- chown ${3} ${2}
- chmod ${4} ${2}
- if [ "${5}" = "true" ]
- then
- _config_changes=1
- fi
- fi
-}
-###################################################################
-# Purpose: rollback a file whose backup was made with make_backup_copy
-#
-# Input:
-# Arg1 is path of installed file. Subroutine will look for ${1}.save
-# Arg2 = true/false, if expanded file is different than installed,
-# set _config_changes to 1 if Arg2 is true. Otherwise, don't touch
-# _config_changes
-#
-# Side Effect: sets _config_changes=1 if changes were rolled back
-###################################################################
-rollback_from_save ()
-{
- if [ -f ${1}.save -o -h ${1}.save ]
- then
- find_source_file ${1}.save false
- ${ECHO} "rollback_from_save: rolling back to $( basename ${_SRCFILE} )"
- grep ${NO_FILE_INDICATOR} ${_SRCFILE} > /dev/null
- if [ $? -eq 0 ]
- then
- rm -f ${_SRCFILE} ${1}
- else
- mv -f ${_SRCFILE} ${1}
- fi
- if [ "${2}" = "true" ]
- then
- _config_changes=1
- fi
- rm -f ${1}.save
- fi
-}