diff options
Diffstat (limited to 'aai-traversal/src/main/resources/etc/sysprops')
| -rw-r--r-- | aai-traversal/src/main/resources/etc/sysprops/sys-props.properties | 140 | ||||
| -rw-r--r-- | aai-traversal/src/main/resources/etc/sysprops/template.sys-props.properties | 115 |
2 files changed, 0 insertions, 255 deletions
diff --git a/aai-traversal/src/main/resources/etc/sysprops/sys-props.properties b/aai-traversal/src/main/resources/etc/sysprops/sys-props.properties deleted file mode 100644 index 44d58d5..0000000 --- a/aai-traversal/src/main/resources/etc/sysprops/sys-props.properties +++ /dev/null @@ -1,140 +0,0 @@ -#This file is used for defining AJSC system properties for different configuration schemes and is necessary for the AJSC to run properly. -#The sys-props.properties file is used for running locally. The template.sys-props.properties file will be used when deployed -#to a SOA/CSI Cloud node. - -#AJSC System Properties. The following properties are required for ALL AJSC services. If you are adding System Properties for your -#particular service, please add them AFTER all AJSC related System Properties. - -#For Cadi Authorization, use value="authentication-scheme-1 -CadiAuthN=authentication-scheme-1 - -#For Basic Authorization, use value="authentication-scheme-1 -authN=authentication-scheme-2 - -#Persistence used for AJSC meta-data storage. For most environments, "file" should be used. -ajscPersistence=file - -# If using hawtio for local development, these properties will allow for faster server startup and usage for local development -hawtio.authenticationEnabled=false -hawtio.config.pullOnStartup=false - -#Removes the extraneous restlet console output -org.restlet.engine.loggerFacadeClass=org.restlet.ext.slf4j.Slf4jLoggerFacade - -#server.host property to be enabled for local DME2 related testing -#server.host=<Your network IP address> - -#Enable/disable SSL (values=true/false). This property also determines which protocol to use (https if true, http otherwise), to register services into GRM through DME2. -enableSSL=false - -#Enable/disable csi logging (values=true/false). This can be disabled during local development -csiEnable=false - -#Enable/disable EJB Container -ENABLE_EJB=false - -#Enable/disable OSGI -isOSGIEnable=false - -#Configure JMS Queue (WMQ/TIBCO) -JMS_BROKER=WMQ - -#JMS properties needed for CSI Logging -JMS_TIBCO_PROVIDER_URL=ONAPserverTBD -JMS_LOGGER_USER_NAME=spm2 -JMS_LOGGER_PASSWORD=its4test -JMS_LOGGER_AUDIT_QUEUE_BINDING=pub.m2e.audit.logger.queue -JMS_LOGGER_PERF_QUEUE_BINDING=log.csi.performance02 - -#WMQ connectivity -JMS_WMQ_PROVIDER_URL=aftdsc://AFTUAT/34.07/-84.28 -JMS_WMQ_CONNECTION_FACTORY_NAME=aftdsc://AFTUAT/?service=CSILOG,version=1.0,bindingType=fusionBus,envContext=Q,Q25A=YES -JMS_WMQ_INITIAL_CONNECTION_FACTORY_NAME=com.att.aft.jms.FusionCtxFactory -JMS_WMQ_AUDIT_DESTINATION_NAME=queue:///CSILOGQL.M2E.DASHBOARD01.NOT.Q25A -JMS_WMQ_PERF_DESTINATION_NAME=queue:///CSILOGQL.M2E.PERFORMANCE01.NOT.Q25A - - -#CSI related variables for CSM framework -csm.hostname=d1a-m2e-q112m2e1.edc.cingular.net - -#Enable/disable endpoint level logging (values=true/false). This can be disabled during local development -endpointLogging=false - -#SOA_CLOUD_ENV is used to register your service with dme2 and can be turned off for local development (values=true/false). -SOA_CLOUD_ENV=false - -#CONTINUE_ON_LISTENER_EXCEPTION will exit the application if there is a DME2 exception at the time of registration. -CONTINUE_ON_LISTENER_EXCEPTION=false - -#Jetty Container ThreadCount Configuration Variables -AJSC_JETTY_ThreadCount_MIN=10 -AJSC_JETTY_ThreadCount_MAX=500 -AJSC_JETTY_IDLETIME_MAX=60000 -AJSC_JETTY_BLOCKING_QUEUE_SIZE=100 - -#Camel Context level default threadPool Profile configuration -CAMEL_POOL_SIZE=10 -CAMEL_MAX_POOL_SIZE=20 -CAMEL_KEEP_ALIVE_TIME=60 -CAMEL_MAX_QUEUE_SIZE=1000 - -#File Monitor configurations -ssf_filemonitor_polling_interval=5 -ssf_filemonitor_threadpool_size=10 - -#GRM/DME2 System Properties -AFT_DME2_CONN_IDLE_TIMEOUTMS=5000 -AJSC_ENV=SOACLOUD - -SOACLOUD_NAMESPACE=com.att.ajsc -SOACLOUD_ENV_CONTEXT=DEV -SOACLOUD_PROTOCOL=http -SOACLOUD_ROUTE_OFFER=DEFAULT - -sslport=8446 -server.port=8083 - -AFT_LATITUDE=23.4 -AFT_LONGITUDE=33.6 -AFT_ENVIRONMENT=AFTUAT - -#Restlet Component Default Properties -RESTLET_COMPONENT_CONTROLLER_DAEMON=true -RESTLET_COMPONENT_CONTROLLER_SLEEP_TIME_MS=100 -RESTLET_COMPONENT_INBOUND_BUFFER_SIZE=8192 -RESTLET_COMPONENT_MIN_THREADS=1 -RESTLET_COMPONENT_MAX_THREADS=10 -RESTLET_COMPONENT_LOW_THREADS=8 -RESTLET_COMPONENT_MAX_QUEUED=0 -RESTLET_COMPONENT_MAX_CONNECTIONS_PER_HOST=-1 -RESTLET_COMPONENT_MAX_TOTAL_CONNECTIONS=-1 -RESTLET_COMPONENT_OUTBOUND_BUFFER_SIZE=8192 -RESTLET_COMPONENT_PERSISTING_CONNECTIONS=true -RESTLET_COMPONENT_PIPELINING_CONNECTIONS=false -RESTLET_COMPONENT_THREAD_MAX_IDLE_TIME_MS=60000 -RESTLET_COMPONENT_USE_FORWARDED_HEADER=false -RESTLET_COMPONENT_REUSE_ADDRESS=true - -#Externalized jar and properties file location. In CSI environments, there are a few libs that have been externalized to aid -#in CSTEM maintenance of the versions of these libs. The most important to the AJSC is the DME2 lib. Not only is this lib necessary -#for proper registration of your AJSC service on a node, but it is also necessary for running locally as well. Another framework -#used in CSI envs is the CSM framework. These 2 framework libs are shown as "provided" dependencies within the pom.xml. These -#dependencies will be copied into the target/commonLibs folder with the normal "mvn clean package" goal of the AJSC. They will -#then be added to the classpath via AJSC_EXTERNAL_LIB_FOLDERS system property. Any files (mainly property files) that need -#to be on the classpath should be added to the AJSC_EXTERNAL_PROPERTIES_FOLDERS system property. The default scenario when -#testing your AJSC service locally will utilize the target/commonLibs directory for DME2 and CSM related artifacts and 2 -#default csm properties files will be used for local testing with anything CSM knorelated. -#NOTE: we are using maven-replacer-plugin to replace "(doubleUnderscore)basedir(doubleUnderscore)" with ${basedir} within the -#target directory for running locally. Multiple folder locations can be separated by the pipe ("|") character. -#Please, NOTE: for running locally, we are setting this system property in the antBuild/build.xml "runLocal" target and in the -#"runAjsc" profile within the pom.xml. This is to most effectively use maven variables (${basedir}, most specifically. Therefore, -#when running locally, the following 2 properties should be set within the profile(s) themselves. -#Example: target/commonLibs|target/otherLibs -#AJSC_EXTERNAL_LIB_FOLDERS=__basedir__/target/commonLibs -#AJSC_EXTERNAL_PROPERTIES_FOLDERS=__basedir__/ajsc-shared-config/etc -#End of AJSC System Properties - -#Service System Properties. Please, place any Service related System Properties below. -KEY_STORE_PASSWORD=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0 -KEY_MANAGER_PASSWORD=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0 -AAI_CORE_VERSION=1.2.0-SNAPSHOT diff --git a/aai-traversal/src/main/resources/etc/sysprops/template.sys-props.properties b/aai-traversal/src/main/resources/etc/sysprops/template.sys-props.properties deleted file mode 100644 index c9060f9..0000000 --- a/aai-traversal/src/main/resources/etc/sysprops/template.sys-props.properties +++ /dev/null @@ -1,115 +0,0 @@ -#This file is used for defining AJSC system properties for different configuration schemes and is necessary for the AJSC to run properly. -#The sys-props.properties file is used for running locally. - -#For Cadi Authorization, use value="authentication-scheme-1" -CadiAuthN=__AJSC_CADI_AUTHN__ - -#For Basic Authorization, use value="authentication-scheme-1" -authN=__AJSC_AUTH_SCHEME__ - -#Persistence used for AJSC meta-data storage. For most environments, "file" should be used. -ajscPersistence=__AJSC_PERSISTENCE__ - -#Configure externalized logback location -logback.configurationFile=__LOGBACK_CONFIG_FILE__ - -# If using hawtio for local development, these properties will allow for faster server startup and usage for local development. -# You may wish to deploy hawtio.war to dev/test environments to help debugging as well, but should not be used in PROD env. -hawtio.authenticationEnabled=__HAWTIO_AUTHENTICATION_ENABLED__ -hawtio.config.pullOnStartup=__HAWTIO_CONFIG_PULLONSTARTUP__ - -#Removes the extraneous restlet console output -org.restlet.engine.loggerFacadeClass=org.restlet.ext.slf4j.Slf4jLoggerFacade - -#Enable/disable SSL (values=true/false). -enableSSL=__AJSC_ENABLE_SSL__ - -#Enable/disable csi logging (values=true/false). -csiEnable=__CSI_ENABLE__ - -#Enable/disable EJB Container -ENABLE_EJB=__ENABLE_EJB__ - -#Enable/disable OSGI -isOSGIEnable=__OSGI_ENABLE__ - -#Configure JMS Queue (WMQ/TIBCO) -JMS_BROKER=WMQ - -#JMS properties needed for CSI Logging -JMS_TIBCO_PROVIDER_URL=ONAPserverTBD -JMS_LOGGER_USER_NAME=spm2 -JMS_LOGGER_PASSWORD= -JMS_LOGGER_AUDIT_QUEUE_BINDING=pub.m2e.audit.logger.queue -JMS_LOGGER_PERF_QUEUE_BINDING=log.csi.performance02 - -#WMQ connectivity -JMS_WMQ_PROVIDER_URL=__JMS_WMQ_PROVIDER_URL__ -JMS_WMQ_CONNECTION_FACTORY_NAME=__JMS_WMQ_CONNECTION_FACTORY_NAME__ -JMS_WMQ_INITIAL_CONNECTION_FACTORY_NAME=__JMS_WMQ_INITIAL_CONNECTION_FACTORY_NAME__ -JMS_WMQ_AUDIT_DESTINATION_NAME=__JMS_WMQ_AUDIT_DESTINATION_NAME__ -JMS_WMQ_PERF_DESTINATION_NAME=__JMS_WMQ_PERF_DESTINATION_NAME__ - -#CSI related variables for CSM framework -csm.hostname=d1a-m2e-q112m2e1.edc.cingular.net - -#Enable/disable endpoint level logging (values=true/false). -endpointLogging=__END_POINT_LEVEL_LOGGING__ - -#SOA_CLOUD_ENV is used to register your service with dme2 (values=true/false). -SOA_CLOUD_ENV=__SOA_CLOUD_ENV__ - -#Jetty Container ThreadCount Configuration Variables -AJSC_JETTY_ThreadCount_MAX=__AJSC_JETTY_ThreadCount_MAX__ -AJSC_JETTY_ThreadCount_MIN=__AJSC_JETTY_ThreadCount_MIN__ -AJSC_JETTY_IDLETIME_MAX=__AJSC_JETTY_IDLETIME_MAX__ -AJSC_SERVICE_NAMESPACE=ActiveAndAvailableInventory-Traversal -AJSC_SERVICE_VERSION=__AJSC_SERVICE_VERSION__ -AJSC_JETTY_BLOCKING_QUEUE_SIZE=100 - -#Camel Context level default threadPool Profile configuration -CAMEL_POOL_SIZE=__CAMEL_POOL_SIZE__ -CAMEL_MAX_POOL_SIZE=__CAMEL_MAX_POOL_SIZE__ -CAMEL_KEEP_ALIVE_TIME=__CAMEL_KEEP_ALIVE_TIME__ -CAMEL_MAX_QUEUE_SIZE=__CAMEL_MAX_QUEUE_SIZE__ - -#File Monitor configurations -ssf_filemonitor_polling_interval=__AJSC_SSF_FILE_MONITOR_POLLING_INTERVAL__ -ssf_filemonitor_threadpool_size=__AJSC_SSF_FILE_MONITOR_THREAD_POOL_SIZE__ - -#GRM/DME2 System Properties below -AFT_DME2_CONN_IDLE_TIMEOUTMS=__AFT_DME2_CONN_IDLE_TIMEOUTMS__ -AJSC_ENV=__AJSC_ENV__ -SOACLOUD_NAMESPACE=__SOA_CLOUD_NAMESPACE__ -SOACLOUD_ENV_CONTEXT=__SCLD_ENV__ -SOACLOUD_PROTOCOL=__SOACLOUD_PROTOCOL__ -SOACLOUD_ROUTE_OFFER=__AAIENV__ -sslport=8446 -server.port=8083 -AFT_LATITUDE=__LATITUDE__ -AFT_LONGITUDE=__LONGITUDE__ -AFT_ENVIRONMENT=__AFT_ENVIRONMENT__ - -#Restlet Component Properties -RESTLET_COMPONENT_CONTROLLER_DAEMON=__RESTLET_COMPONENT_CONTROLLER_DAEMON__ -RESTLET_COMPONENT_CONTROLLER_SLEEP_TIME_MS=__RESTLET_COMPONENT_CONTROLLER_SLEEP_TIME_MS__ -RESTLET_COMPONENT_INBOUND_BUFFER_SIZE=__RESTLET_COMPONENT_INBOUND_BUFFER_SIZE__ -RESTLET_COMPONENT_MIN_THREADS=__RESTLET_COMPONENT_MIN_THREADS__ -RESTLET_COMPONENT_MAX_THREADS=__RESTLET_COMPONENT_MAX_THREADS__ -RESTLET_COMPONENT_LOW_THREADS=__RESTLET_COMPONENT_LOW_THREADS__ -RESTLET_COMPONENT_MAX_QUEUED=__RESTLET_COMPONENT_MAX_QUEUED__ -RESTLET_COMPONENT_MAX_CONNECTIONS_PER_HOST=__RESTLET_COMPONENT_MAX_CONNECTIONS_PER_HOST__ -RESTLET_COMPONENT_MAX_TOTAL_CONNECTIONS=__RESTLET_COMPONENT_MAX_TOTAL_CONNECTIONS__ -RESTLET_COMPONENT_OUTBOUND_BUFFER_SIZE=__RESTLET_COMPONENT_OUTBOUND_BUFFER_SIZE__ -RESTLET_COMPONENT_PERSISTING_CONNECTIONS=__RESTLET_COMPONENT_PERSISTING_CONNECTIONS__ -RESTLET_COMPONENT_PIPELINING_CONNECTIONS=__RESTLET_COMPONENT_PIPELINING_CONNECTIONS__ -RESTLET_COMPONENT_THREAD_MAX_IDLE_TIME_MS=__RESTLET_COMPONENT_THREAD_MAX_IDLE_TIME_MS__ -RESTLET_COMPONENT_USE_FORWARDED_HEADER=__RESTLET_COMPONENT_USE_FORWARDED_HEADER__ -RESTLET_COMPONENT_REUSE_ADDRESS=__RESTLET_COMPONENT_REUSE_ADDRESS__ - -AJSC_EXTERNAL_LIB_FOLDERS=__CSM_LIB__|__DME2_LIB__|__AJSC_EXTERNAL_LIB_FOLDERS__ -AJSC_EXTERNAL_PROPERTIES_FOLDERS=__AJSC_SHARED_CONFIG__|__AJSC_EXTERNAL_PROPERTIES_FOLDERS__ - -KEY_STORE_PASSWORD=__KEY_STORE_PASSWORD__ -KEY_MANAGER_PASSWORD=__KEY_MANAGER_PASSWORD__ -AAI_CORE_VERSION=1.2.0-SNAPSHOT |