diff options
Diffstat (limited to 'aai-traversal/ajsc-shared-config/etc/csm-config-app.properties')
| -rw-r--r-- | aai-traversal/ajsc-shared-config/etc/csm-config-app.properties | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/aai-traversal/ajsc-shared-config/etc/csm-config-app.properties b/aai-traversal/ajsc-shared-config/etc/csm-config-app.properties new file mode 100644 index 0000000..b4d0476 --- /dev/null +++ b/aai-traversal/ajsc-shared-config/etc/csm-config-app.properties @@ -0,0 +1,183 @@ +Global.ExtendedProperty.AuthoritativeServers=${ChangeMe_csm.acfshost}:${ChangeMe_csm.acfsport} + +# +# The settings in this file control the behavior of the CSM Framework. +# The majority of the settings in this file adhere to the following +# pattern: +# +# [EntityType].[EntityId].[PropertyName]=[PropertyValue] +# +# Where: +# +# [EntityType] Identifies the type of entity (service or +# service group) that's being configured. +# [EntityId] Identifies the individual entity. +# [PropertyName] Identifies the property that is being set. +# [PropertyValue] Is the actual property value. +# +# In the formatting sample above, the EntityType can be setto one of the +# following values: +# +# * 'Service' if an individual service is being configured. +# * 'Group 'if a service group is being configured. +# +# The reference to 'entity' in the above description is intentionally +# generic. The CSM Framework supports the configuration of individual +# services as well as groups of services. The type of entity that is +# actually being configured is determined by the value of the +# [EntityType] portion of the property. +# +# There are two values for [EntityId] that have a special meaning within +# the CSM Framework: +# +# +# DefaultService - Identifies the default configuration for any service +# that is not explicitly configured elsewhere in this file. +# +# DefaultServiceGroup - This identifies the entity that provides the +# default configuration for any service group that is not explicitly +# configured elsewhere in this file. +# +# DO NOT use either of these as the identifier for any of your +# application-specific services or service groups. +# +# The CSM Framework treats all entity identifiers in a case-insensitive +# manner. The entity ids 'Service1' and 'SERVICE1' are equivalant. All +# properties with the same [EntityId] will be applied to the same +# configuration. The CSM Framework framework also treats property names +# in a case-insensitive manner. 'MaxRequestCount' and 'MAXREQUESTCOUNT' +# are considered equivalent within the CSM framework. +# +# The following properties are supported by the CSM Framework. Any +# properties that are entity-specific will include the '[EntityId].' +# prefix. +# +# [EntityType].[EntityId].Enabled - Indicates if the entity is enabled +# or disabled by default. The value of this property must be either +# 'true' or 'false'. +# +# [EntityType].[EntityId].MaxRequestCount - The maximum number of +# requests that can be running at any point in time. Once this limit is +# reached, the service is considered to be 'flooded', and subsequent +# requests are refused until the request count drops to the level +# specified by the RestartThreshold property. Once the restart +# threshold is reached, the service will be 'restarted' based on the +# values of the 'RestartFrequency' and 'RestartIncrement' properties. +# The value of this property must be a numeric value. +# The default value for this property is 20. +# +# [EntityType].[EntityId].MaxStalledRequestCount - the maximum number of +# 'stalled' requests that are allowed before subsequent requests are +# refused +# The value of this property must be a numeric value. +# The default value for this property is 10. +# +# [EntityType].[EntityId].RestartThreshold - the process count level at +# which requests will be allowed to proceed whenever a service becomes +# 'flooded'. This property is only used if the total process count +# reaches the level set by the 'MaxRequestCount' property. Once that +# occurs, subsequent requests will be refused until the active request +# count drops to the level specified by this property. Once the active +# request count drops to the level specified by this property, the +# service will be 'restarted' based on the values of the +# 'RestartFrequency' and 'RestartIncrement' properties. To cause the +# CSM framework to allow subsequent requests to proceed as soon as the +# active request count drops below level level set by the +# 'MaxRequestCount' property, just set this property to either -1 or 1 +# less than the value of the 'MaxRequestCount' property. +# The value of this property must be a numeric value. +# The default value for this property is -1. +# +# [EntityType].[EntityId].RestartIncrement - This property, along with +# the 'RestartFrequency' property helps determine how quickly the active +# request count will rise to the 'maximum request count' whenever a +# service is 'restarted' after becoming 'flooded'. The +# 'RestartFrequency' property determines how frequenty the permissable +# number of active requests will be increased. This property determines +# how much the permissible number of active requests will increase by +# whenever it is raised. If this property is set to a positive value, +# then the 'RestartFrequency' property must also be set to a positive +# value. If this property is set to 0, then the 'RestartFrequency' +# property must also be set to 0. In other words, either both +# properties are 0 or both properties are greater than 0. When both +# properties are set to 0, then the permissable number of active +# requests immediately rises back up to the maximum request count once +# it has droppedback down to the 'restart threshold'. When both +# properties are greater than 0, then the permissable number of active +# requests gradually rises to the maximum request count. +# The value of this property must be a numeric value greater than or equal to 0. +# The default value for this property is 0. +# +# [EntityType].[EntityId].RestartFrequency - This property, along with +# the 'RestartIncrement' property helps determine how quickly the active +# request count will rise to the 'maximum request count' whenever a +# service is 'restarted' after becoming 'flooded'. The +# 'RestartIncrement' property determines how quickly the permissable +# number of active requests will be increased. This property determines +# how frequently that increase will occur. If this property is set to +# a positive value, then the 'RestartIncrement' property must also be +# set to a positive value. If this property is set to 0, then the +# 'RestartIncrement' property must also be set to 0. In other words, +# either both properties are 0 or both properties are greater than 0. +# When both properties are set to 0, then the permissable number of +# active requests immediately rises back up to the maximum request count +# once it has droppedback down to the 'restart threshold'. When both +# properties are greater than 0, then the permissable number of active +# requests gradually rises to the maximum request count. +# The value of this property must be a numeric value greater than or equal to 0. +# The default value for this property is 0. +# +# [EntityType].[EntityId].ServiceGroupId - This property is only +# relevant for entities that are configured as services (i.e. the +# [EntityType] portion of the property is set to 'Service'). When the +# 'ServiceGroupId' property is set to a non-blank value, the behavior of +# the service is controled by the configuration of the corresponding +# service group. There is no default value for this property. +# +# [EntityType].[EntityId].Timeout - the timeout, in milliseconds, for +# each process that is controlled by this configuration. Once the +# duration of a process exceeds this value, the process will be +# considered to have entered a 'stalled' state. The default value for +# this property is 10000. +# +# FrameworkEnabled: - This is the one property that is not specific to a +# single entity. This property determines whether the entire CSM +# Framework is enabled or disabled. When disabled, the CSM Framework +# does not track any process counts. All requests to access a service +# are allowed, regardless of the current level of activity. The value +# of this property must be either 'true' or 'false'. +# + +# +# Enables the CSM Framework so that it can manage interactions with external +# services and/or resources. To disable the CSM Framework, simply set +# this property to false. +# +FrameworkEnabled=true + +# +# These are the default settings for any service that is no explicitly configured +# below. A few things to note about this configuration: +# 1) The "Enabled" property is not explicitly set. Instead, we are relying +# on the default value of 'true'. +# 2) The Timeout and Type properties are also not explicitly set. Again, we +# are relying on the default values for these properties. +# +Service.DefaultService.Enabled=true +Service.DefaultService.MaxRequestCount=30 +Service.DefaultService.MaxStalledRequestCount=20 +Service.DefaultService.Timeout=30000 +Service.DefaultService.RestartThreshold=-1 +Service.DefaultService.AutoPurgeAfter=150000 + + +# +# These are the default settings for any service group that is referenced in +# a service configuration but not configured below. +# +# Currently CSI does not use any service group configurations! +# +#Group.DefaultGroup.MaxRequestCount=-1 +#Group.DefaultGroup.MaxStalledRequestCount=-1 +#Group.DefaultGroup.RestartThreshold=-1 +#Group.DefaultGroup.Timeout=-1 |