Update traversal to use schema ingest library

Update the traversal microservice to use the ingest
library to make the application more model driven

Issue-ID: AAI-1465
Change-Id: Ifcf56b5d0e7f25ce2bc735b3186e09bc28234100
Signed-off-by: Kajur, Harish (vk250x) <vk250x@att.com>

1 files changed, 0 insertions, 725 deletions

diff --git a/aai-traversal/src/main/scripts/install/instutils.sh b/aai-traversal/src/main/scripts/install/instutils.sh
deleted file mode 100644
index ab94a9c..0000000
--- a/aai-traversal/src/main/scripts/install/instutils.sh
+++ /dev/null
@@ -1,725 +0,0 @@
-#!/bin/ksh
-#
-# ============LICENSE_START=======================================================
-# org.onap.aai
-# ================================================================================
-# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-
-ECHO=${ECHO:-echo}
-
-q_flags="-qq -k$$"
-
-show_install=${PROJECT_HOME}/install/show_install
-
-############################################################################
-# checkgroup groupname gid
-# checks if group is already in /etc/group and if it has the right gid
-# if it's not there, it adds it
-# gid can be DC if you don't care
-############################################################################
-checkgroup () {
-	ecode=0
-	OFILE=/tmp/group.$$
-	getent group "$1" > $OFILE
-	if [ $? -eq 0 ]
-	then
-		CHECKGID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
-		CHECKGROUPPRESENT=$( grep "^$1:" $OFILE | cut -f1 -d: 2>/dev/null )
-		CHECKGROUP=$( grep ":$2:" $OFILE | cut -f1 -d: 2>/dev/null )
-	fi
-	if [ "${CHECKGID}" = "" -a "${CHECKGROUP}" = "" ]
-	then
-		${ECHO} "Adding $1 group ..."
-		if [ "$2" = "DC" ]
-		then
-			groupadd $1 
-		else
-			groupadd -g $2 $1 
-		fi
-		if [ "$?" != "0" ]
-		then
-			${ECHO} "Cannot add group $1, continuing..."
-			ecode=1
-		fi
-	else
-		if [ "${CHECKGROUPPRESENT}" = "$1" ]
-		then
-			if [ "$2" != "DC" ]  
-			then
-				if [ "${CHECKGID}" != "$2" ]
-				then
-					${ECHO} "ERROR:  $1 group added but with wrong gid \"${CHECKGID}\"; should be $2"
-					ecode=1
-				fi
-				if [ "${CHECKGROUP}" != "$1" ]
-				then
-					${ECHO} "ERROR:  wrong group \"${CHECKGROUP}\" for gid $2, group should be $1"
-					ecode=1
-				fi
-			else
-				${ECHO} "$1 group has already been added"
-			fi
-		fi
-	fi
-	rm -f $OFILE
-	return ${ecode}
-}
-
-############################################################################
-# checkuser username uid homedir shell group
-# checks if the username/uid/homedir/shell combo is already in /etc/passwd
-# if not, it adds it
-# if the login is there and the uid belongs to a different user, it errors
-# if the login is there and the shell is not correct, it errors
-# uid may be DC for don't care
-############################################################################
-checkuser () {
-	ecode=0
-	OFILE=/tmp/user.$$
-	getent passwd $1 > $OFILE
-	if [ $? -eq 0 ]
-	then	
-		CHECKUID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
-		CHECKLOGIN=$( grep ":x:$2:" $OFILE | cut -f1 -d: 2>/dev/null )
-		CHECKLOGINPRESENT=$( grep "^$1:" $OFILE | cut -f1 -d: 2>/dev/null )
-		CHECKSHELL=$( grep "^$1:" $OFILE | cut -f7 -d: 2>/dev/null )
-		CHECKHOME=$( grep "^$1:" $OFILE | cut -f6 -d: 2>/dev/null )
-	fi
-	
-	if [ ! -d $3 ]
-	then
-		mkdir -p $3
-		if [ "$?" != "0" ]
-		then
-			${ECHO} "mkdir -p $3 failed"
-			ecode=1
-		fi
-		chmod -R 755 $3
-	fi
-	if [ "${CHECKUID}" = "" -a "${CHECKLOGIN}" = "" ]
-	then
-		${ECHO} "Adding $1 login ..."
-		if [ "$2" = "DC" ]
-		then
-			useradd -g $5 -d $3 -s $4 -c "$1 LOGIN" -m $1
-		else
-			useradd -u $2 -g $5 -d $3 -s $4 -c "$1 LOGIN" -m $1
-		fi
-		if [ "$?" != "0" ]
-		then
-			${ECHO} "Cannot add $1 login, continuing..."
-			ecode=1
-		fi
-	elif [ "${CHECKLOGINPRESENT}" = "$1" -a "$2" = "DC" -a "${CHECKSHELL}" = "$4" -a "${CHECKHOME}" = "$3" ]
-	then
-		${ECHO} "The '$1' login has already been added to system with UID ${CHECKUID}."
-	
-	elif [ "${CHECKUID}" = "$2" -a "${CHECKLOGIN}" = "$1" -a "${CHECKSHELL}" = "$4" -a "${CHECKHOME}" = "$3" ]
-	then
-		${ECHO} "The '$1' login has already been added to system."
-	else
-		if [ "$2" != "DC" -a "${CHECKUID}" != "$2" ]
-		then
-			${ECHO} "ERROR:  $1 login added but with wrong uid \"${CHECKUID}\"; should be $2"
-			ecode=1
-		fi
-		if [ "$2" != "DC" -a "${CHECKLOGIN}" != "$1" ]
-		then
-			${ECHO} "ERROR:  wrong login \"${CHECKLOGIN}\" for uid $2, login should be $1"
-			ecode=1
-		fi
-		if [ "${CHECKHOME}" != "$3" ]
-		then
-			${ECHO} "ERROR:  wrong home directory \"${CHECKHOME}\" for login $1, should be $3"
-			ecode=1
-		fi
-		if [ "${CHECKSHELL}" != "$4" ]
-		then
-			${ECHO} "ERROR:  $1 login not set up with $4"
-			ecode=1
-		fi
-	fi
-	rm -f $OFILE
-	return ${ecode}
-}
-
-############################################################################
-# checkhome username homedir action
-# if the user doesn't exist, it errors
-# checks if the username has homedir as its home directory
-# if not and action is null, it modifies it
-# if not and action is mod, it modifies it
-# if not and action is error, it errors
-############################################################################
-checkhome () {
-	ecode=0
-	OFILE=/tmp/user.$$
-	getent passwd $1 > $OFILE
-	if [ $? -eq 0 ]
-	then	
-		CHECKUID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
-		CHECKGID=$( grep "^$1:" $OFILE | cut -f4 -d: 2>/dev/null )
-		CHECKHOME=$( grep "^$1:" $OFILE | cut -f6 -d: 2>/dev/null )
-		
-		if [ "${CHECKHOME}" = "$2" ] 
-		then
-			if [ ! -d $2 ]
-			then
-				mkdir -p $2
-				if [ "$?" != "0" ]
-				then
-					${ECHO} "mkdir -p $2 failed"
-					ecode=1
-				fi
-				chown ${CHECKUID}:${CHECKGID} $2
-				chmod -R 755 $2
-			fi
-		else
-			# modify the user to set the new home dir and move any current home dir to there
-			usermod -d $2 -m $1
-			if [ "$?" != "0" ]
-			then
-				${ECHO} "usermod -d $2 -m $1 failed"
-				ecode=1
-			fi
-		fi
-	else
-		${ECHO} "user $1 doesn't exist"
-		ecode=1
-	fi
-	
-	rm -f $OFILE
-	return ${ecode}
-}
-
-##################################################################
-#checkloginsforpwds checks /etc/shadow for logins without passwords
-# the first argument is a list of logins to check
-##################################################################
-checkloginsforpwds () {
-	for i in $1
-	do
-		CHECK_LOGIN=$( grep "^${i}:" /etc/shadow | grep "!!" )
-		if [ "${CHECK_LOGIN}" != "" ]
-		then
-			NOPWD="${NOPWD} ${i}"
-		fi
-	done
-	
-	if [ "${NOPWD}" != "" ]
-	then
-	   ${ECHO} ""
-	   ${ECHO} "REMINDER:  The following logins must have a passwords assigned to them.\n"
-	   ${ECHO} "##############################################################"
-	   ${ECHO} "		${NOPWD}	"
-	   ${ECHO} "##############################################################"
-	   ${ECHO} ""
-	   ${ECHO} "           This must be done by executing the following command:"
-	   ${ECHO} ""
-	   ${ECHO} "           $ passwd <login>"
-	   ${ECHO} ""
-	   ${ECHO} "           After typing the \"passwd\" command you will be prompted for"
-	   ${ECHO} "           the password for the login."          
-	   ${ECHO} ""
-	fi
-}
-
-##################################################################
-# checkassignpasswords checks /etc/shadow for logins without passwords
-# and then asks the user to assign one
-# the first argument is a list of logins to check
-##################################################################
-checkassignpasswords () {
-	for i in $1
-	do
-		CHECK_LOGIN=$( grep "^${i}:" /etc/shadow | grep LK )
-		if [ "${CHECK_LOGIN}" != "" ]
-		then
-			${ECHO} "Please assign a password for the '${i}' login"
-			passwd ${i}
-			${ECHO}
-		fi
-	done
-}
-
-############################################################################
-# copywithperms origfile destfile owner group perms [save suffix]
-# copies origfile to destfile, giving destfile ownership and permssions
-# from owner, group, and perms.  If the sixth argument is "save", the
-# original is saved in the same place with the seventh argument as the
-# suffix.  If the seventh arg is null, $$ is used
-############################################################################
-copywithperms () {
-	SAVE=0
-	ECODE=0
-	if [ "$6" = "save" -a -f "$2" ]
-	then
-		if [ "$7" = "" ]
-		then
-			cp $2 $2.$$
-		else
-			cp $2 $2.$7
-		fi
-	fi
-	if [ -f $1 ]
-	then
-		cp $1 $2
-		ECODE=$?
-		chown ${3}:${4} $2
-		chmod $5 $2
-	else
-		${ECHO} "$1 is not a file.  No copy done!"
-	fi
-	return ${ECODE}
-}
-
-############################################################################
-# mkdirwithperms dirname owner group perms ifExist
-# makes directory dirname , giving dirname ownership and permssions
-# from owner, group, and perms.  
-# perms can be DC if you don't care
-# ifExist can be rm, error, dontcreate
-############################################################################
-mkdirwithperms () {
-	ECODE=0
-	if [ -f $1 ]
-	then
-		ECODE=1
-		${ECHO} "$1 exists but is a file.  No mkdir done!"
-	elif [ -d $1 ]
-	then
-		if [ "$5" = "rm" ]
-		then
-			rm -rf $1
-			mkdir -p $1
-			if [ "$?" != "0" ]
-			then
-				${ECHO} "mkdir -p $1 failed"
-				ECODE=1
-			fi
-		elif [ "$5" = "error" ]
-		then
-			ECODE=1
-			${ECHO} "$1 is a directory.  No mkdir done!"
-		elif [ "$5" != "dontcreate" ]
-		then
-			mkdir -p $1
-			if [ "$?" != "0" ]
-			then
-				${ECHO} "mkdir -p $1 failed"
-				ECODE=1
-			fi
-		fi
-	else
-		mkdir -p $1
-		if [ "$?" != "0" ]
-		then
-			${ECHO} "mkdir -p $1 failed"
-			ECODE=1
-		fi
-	fi
-	if [ "${ECODE}" = "0" ]
-	then
-		chown ${2}:${3} $1
-		if [ "$4" != "DC" ]
-		then
-			chmod $4 $1
-		fi
-	fi
-	return ${ECODE}
-}
-
-
-############################################################################
-# chownwithperms owner group file mode
-# changes the ownership and mode for the specified file
-############################################################################
-chownwithperms () {
-	chown ${1}:${2} $3
-	chmod $4 $3
-}
-
-verifywhosrunning () {
-	userid=$( id | cut -f2 -d"(" | cut -f1 -d")" )
-	if [ "${userid}" != "$1" ]
-	then
-		${ECHO} "You must be $1 to run $0"
-		exit 1
-	fi
-}
-
-replaceline() {
-
-	name=$1
-	value=$2
-	file=$3
-
-	if [ -z "${file}" ]
-	then
-		${ECHO} "replaceline: ERROR: insufficient arguments: $1 $2" >&2
-		return 1
-	fi
-
-	if [ -n "$4" ]
-	then
-		${ECHO} "replaceline: ERROR: too many arguments: $1 $2 $3 $4" >&2
-		return 1
-	fi
-
-	if [ -f ${file} ]
-	then
-		grep -v "^${name}=" ${file} > ${file}.$$
-		${ECHO} "${name}=${value}" >> ${file}.$$
-		mv -f ${file}.$$ ${file}
-	else 
-		${ECHO} "${name}=${value}" > ${file}
-	fi
-}
-
-replaceline_with_quotes() {
-
-	name=$1
-	value=$2
-	file=$3
-
-	if [ -z "${file}" ]
-	then
-		${ECHO} "replaceline: ERROR: insufficient arguments: $1 $2" >&2
-		return 1
-	fi
-
-	if [ -n "$4" ]
-	then
-		${ECHO} "replaceline: ERROR: too many arguments: $1 $2 $3 $4" >&2
-		return 1
-	fi
-
-	if [ -f ${file} ]
-	then
-		grep -v "^${name}=" ${file} > ${file}.$$
-		${ECHO} "${name}=\"${value}\"" >> ${file}.$$
-		mv -f ${file}.$$ ${file}
-	else 
-		${ECHO} "${name}=\"${value}\"" > ${file}
-	fi
-}
-
-# this deleteline will not actually delete the entry
-# but only delete the value leaving the name=
-# when siteconf.pl went from Boilerplate to Fillin,
-# we changed this because Fillin can handle null values.
-
-deleteline() {
-
-	name=$1
-	file=$2
-
-	if [ -z "${file}" ]
-	then
-		${ECHO} "deleteline: ERROR: insufficient arguments" >&2
-		return 1
-	fi
-
-	if [ -f ${file} ]
-	then
-		cp ${file} ${file}.$$
-		lno=$( grep -n "^${name}=" ${file} | cut -d: -f1 )
-		if [ "${lno}" != "" ] 
-		then
-			sed "${lno}d" ${file} > ${file}.$$
-		fi
-		${ECHO} "${name}=" >> ${file}.$$
-		mv -f ${file}.$$ ${file}
-	else 
-		${ECHO} "${name}=" > ${file}
-	fi
-}
-
-# dropline will drop the line from the file
-# unlike the deleteline function above
-
-dropline() {
-
-	name=$1
-	file=$2
-
-	if [ -z "${file}" ]
-	then
-		${ECHO} "dropline: ERROR: insufficient arguments" >&2
-		return 1
-	fi
-
-	if [ -f ${file} ]
-	then
-		grep -v "^${name}=" ${file} > ${file}.$$
-		mv -f ${file}.$$ ${file}
-	fi
-}
-
-pause_install() {
-
-	if [ "${Pause}" =  "1" ]
-	then
-		if ${chkyn} -y "Continue with ${Itype}?"
-		then
-			return 0
-		else
-			${ECHO} "${PNAME}: quitting" >&2
-			exit 1
-		fi
-	fi
-}
-
-get_ITYPE() {
-	ITYPE=$( ${chkyn} -fer ${q_flags} -h\? ${ITYPE:+-D"${ITYPE}"} -H \
-"	If you are doing a fresh install, answer 'I' or answer 'U' for upgrade." \
-"Is this a fresh 'install' or 'upgrade' (I or U):${ITYPE:+ [${ITYPE}]}" \
-	'^[IU]$' \
-'*** ERROR *** Entry must be I or U.' )
-}
-
-
-###
-# Change an /etc/group entry to allow a give user to change group into it.
-# arg1 = comma-sep group list (e.g., sylantro,other)
-# arg2 = user
-###
-addUserToGroup()
-{
-	if [ -z "$1" -o -z "$2" ]
-	then
-		${ECHO} "addUserToGroup failed, need two args, group and user"
-		return 1
-	else
-		usermod -G $1 $2
-	fi
-	return 0
-}
-
-################### BACKUP AND RESTORE METHODS ########################
-###################       VARIABLES          ##########################
-###################       VARIABLES          ##########################
-###################       VARIABLES          ##########################
-###################       VARIABLES          ##########################
-
-NO_FILE_INDICATOR="__NO_PREVIOUS_FILE__"
-SAVE_SUFFIX=${Project}save
-
-###################       SUBROUTINES        ##########################
-###################       SUBROUTINES        ##########################
-###################       SUBROUTINES        ##########################
-###################       SUBROUTINES        ##########################
-###################       SUBROUTINES        ##########################
-
-##############################################################################
-# Purpose:  make a backup copy of a file in such a way that the backup
-# won't be lost by re-running your script PLUS give you a predictable name
-# for the most recent back up to use when you roll back.
-#
-# Input:
-# - Arg1 = file to back up
-#
-# Requirement: 
-# - Remove $1.save before calling this function or else a copy won't be made.
-# - Make sure to set the value of env value TODAY to use as a suffix.
-#
-# Description:
-# Copy $1 to $1.${SAVE_SUFFIX}.${TODAY}, then link that to $1.save.
-#
-##############################################################################
-make_backup_copy ()
-{
-	if [ -z "${TODAY}" ]
-	then
-		${ECHO} "make_backup_copy - TODAY variable is unset" >&2
-		return 1
-	fi
-
-	if [ -f $1.${SAVE_SUFFIX}.${TODAY} -a -h $1.save ]
-	then
-		${ECHO} "Note: backup already exists for $1"
-	else
-		# if existing file doesn't exist, set up for later delete by rollback
-		if [ ! -f $1 -a ! -h $1 ]
-		then
-			${ECHO} ${NO_FILE_INDICATOR} > $1
-		fi
-		cp -p $1 $1.${SAVE_SUFFIX}.${TODAY}
-		ln -s $1.${SAVE_SUFFIX}.${TODAY} $1.save
-	fi
-}
-
-################################################################################
-# Purpose: Find the actual file that belongs to $1, which can be a symbolic 
-# link.
-# 
-# Input:
-# - Arg1 = path to file or link
-# - Arg2 = true if you want _SRCFILE to be null if no actual file is 
-#  	found.  If Arg2 is NOT true, then _SRCFILE is set to Arg1.
-# 
-# Side Effect:
-# Sets value of _SRCFILE variable
-################################################################################
-find_source_file ()
-{
-	if [ -z "$1" ]
-	then
-		${ECHO} "find_source_file - needs at least one argument" >&2
-		return 1
-	fi
-
-	ls -l $1 > /tmp/tls$$
-	cat /tmp/tls$$ | sed 's/  */	/g' |cut -f11 > /tmp/cuts$$
-	_SRCFILE=$( cat /tmp/cuts$$ )
-
-	if [ "$_SRCFILE" = "" ]
-	then
-		if [ "$2" != "true" ]
-		then
-			_SRCFILE=$1
-		fi
-	fi
-	rm -f /tmp/tls$$ /tmp/cuts$$
-}
-
-#######################################################################
-# Purpose: Expands template file using data in COPT variable.
-# Diffs expanded template against existing file and installs if different.
-# If arg5 = true, sets _config_changes=1 so you know that changes were installed
-#
-# Makes its own backup copy using make_backup_copy.
-# Does install if different using install_if_different.
-#
-# Input:
-# Arg1 = template path without .tmpl extension
-# Arg2 = install path
-# Arg3 = owner and group (e.g., root:other)
-# Arg4 = permissions (e.g., 750)
-# Arg5 = true/false, if expanded file is different than installed .
-#		Set _config_changes to 1 if Arg5 is true.  Otherwise, don't touch 
-#		_config_changes
-# 
-# Requirement: set COPT to the value of the -c option to siteconf.pl
-#
-# Side Effect: sets _config_changes=1 if changes were installed
-#######################################################################
-install_from_template () 
-{
-	if [ -z "${COPT}" ]
-	then
-		${ECHO} "install_from_template - COPT is unset" >&2
-		return 1
-	fi
-
-	TMPL=$( basename ${1} )
-	OFILE=/tmp/${TMPL}
-	if [ -f ${1}.tmpl ]
-	then
-
-		${PROJECT_HOME}/bin/siteconf.pl -t ${1}.tmpl -c ${COPT} -o ${OFILE}
-		install_if_different ${OFILE} ${2} ${3} ${4} ${5}
-
-	else
-		${ECHO} "install_from_template: ERROR: Missing ${TMPL}.tmpl" >&2
-	fi
-	rm -f ${OFILE}
-}
-
-
-#######################################################################
-# Purpose: Copies source to destination if the two are different.
-# If arg5 = true, sets _config_changes=1 so you know that changes were installed
-#
-# Makes its own backup copy using make_backup_copy.
-#
-# Input:
-# Arg1 = source path
-# Arg2 = install path
-# Arg3 = owner and group (e.g., root:other)
-# Arg4 = permissions (e.g., 750)
-# Arg5 = true/false, if expanded file is different than installed .
-#		Set _config_changes to 1 if Arg5 is true.  Otherwise, don't touch 
-#		_config_changes
-# 
-# Side Effect: sets _config_changes=1 if changes were installed
-#######################################################################
-install_if_different()
-{
-		# Take backup before changing.
-		# Only change if different.
-		if [ -f ${2} ]
-		then
-			diff ${1} ${2} > /dev/null
-			diffrc=$?
-			if [ "${diffrc}" != "0" ]
-			then
-				${ECHO} "Installing ${2}"
-				make_backup_copy ${2}
-				mv -f ${1} ${2}
-				chown ${3} ${2}
-				chmod ${4} ${2}
-				if [ "${5}" = "true" ]
-				then
-					_config_changes=1
-				fi
-			fi
-		else
-			# creates backup containing ${NO_FILE_INDICATOR} for rollback removal
-			make_backup_copy ${2}  
-			mv -f ${1} ${2}
-			chown ${3} ${2}
-			chmod ${4} ${2}
-			if [ "${5}" = "true" ]
-			then
-				_config_changes=1
-			fi
-		fi
-}
-###################################################################
-# Purpose: rollback a file whose backup was made with make_backup_copy
-#
-# Input:
-# Arg1 is path of installed file. Subroutine will look for ${1}.save
-# Arg2 = true/false, if expanded file is different than installed, 
-#		set _config_changes to 1 if Arg2 is true.  Otherwise, don't touch 
-#		_config_changes
-#
-# Side Effect: sets _config_changes=1 if changes were rolled back
-###################################################################
-rollback_from_save ()
-{
-	if [ -f ${1}.save -o -h ${1}.save ]
-	then
-		find_source_file ${1}.save false
-		${ECHO} "rollback_from_save: rolling back to $( basename ${_SRCFILE} )"
-		grep ${NO_FILE_INDICATOR} ${_SRCFILE} > /dev/null
-		if [ $? -eq 0 ]
-		then
-			rm -f ${_SRCFILE} ${1}
-		else
-			mv -f ${_SRCFILE} ${1}
-		fi
-		if [ "${2}" = "true" ]
-		then
-			_config_changes=1
-		fi
-		rm -f ${1}.save
-	fi
-}