Add all of the traversal source files

Change-Id: Id31f4bdda9c86f782f86829f8b86dada959a9729
Signed-off-by: Venkata Harish K Kajur <vk250x@att.com>

3 files changed, 921 insertions, 0 deletions

diff --git a/aai-traversal/src/main/scripts/install/instutils.sh b/aai-traversal/src/main/scripts/install/instutils.sh
new file mode 100644
index 0000000..a512606
--- /dev/null
+++ b/aai-traversal/src/main/scripts/install/instutils.sh
@@ -0,0 +1,724 @@
+#!/bin/ksh
+
+###
+# ============LICENSE_START=======================================================
+# org.openecomp.aai
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+ECHO=${ECHO:-echo}
+
+q_flags="-qq -k$$"
+
+show_install=${PROJECT_HOME}/install/show_install
+
+############################################################################
+# checkgroup groupname gid
+# checks if group is already in /etc/group and if it has the right gid
+# if it's not there, it adds it
+# gid can be DC if you don't care
+############################################################################
+checkgroup () {
+	ecode=0
+	OFILE=/tmp/group.$$
+	getent group "$1" > $OFILE
+	if [ $? -eq 0 ]
+	then
+		CHECKGID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
+		CHECKGROUPPRESENT=$( grep "^$1:" $OFILE | cut -f1 -d: 2>/dev/null )
+		CHECKGROUP=$( grep ":$2:" $OFILE | cut -f1 -d: 2>/dev/null )
+	fi
+	if [ "${CHECKGID}" = "" -a "${CHECKGROUP}" = "" ]
+	then
+		${ECHO} "Adding $1 group ..."
+		if [ "$2" = "DC" ]
+		then
+			groupadd $1 
+		else
+			groupadd -g $2 $1 
+		fi
+		if [ "$?" != "0" ]
+		then
+			${ECHO} "Cannot add group $1, continuing..."
+			ecode=1
+		fi
+	else
+		if [ "${CHECKGROUPPRESENT}" = "$1" ]
+		then
+			if [ "$2" != "DC" ]  
+			then
+				if [ "${CHECKGID}" != "$2" ]
+				then
+					${ECHO} "ERROR:  $1 group added but with wrong gid \"${CHECKGID}\"; should be $2"
+					ecode=1
+				fi
+				if [ "${CHECKGROUP}" != "$1" ]
+				then
+					${ECHO} "ERROR:  wrong group \"${CHECKGROUP}\" for gid $2, group should be $1"
+					ecode=1
+				fi
+			else
+				${ECHO} "$1 group has already been added"
+			fi
+		fi
+	fi
+	rm -f $OFILE
+	return ${ecode}
+}
+
+############################################################################
+# checkuser username uid homedir shell group
+# checks if the username/uid/homedir/shell combo is already in /etc/passwd
+# if not, it adds it
+# if the login is there and the uid belongs to a different user, it errors
+# if the login is there and the shell is not correct, it errors
+# uid may be DC for don't care
+############################################################################
+checkuser () {
+	ecode=0
+	OFILE=/tmp/user.$$
+	getent passwd $1 > $OFILE
+	if [ $? -eq 0 ]
+	then	
+		CHECKUID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
+		CHECKLOGIN=$( grep ":x:$2:" $OFILE | cut -f1 -d: 2>/dev/null )
+		CHECKLOGINPRESENT=$( grep "^$1:" $OFILE | cut -f1 -d: 2>/dev/null )
+		CHECKSHELL=$( grep "^$1:" $OFILE | cut -f7 -d: 2>/dev/null )
+		CHECKHOME=$( grep "^$1:" $OFILE | cut -f6 -d: 2>/dev/null )
+	fi
+	
+	if [ ! -d $3 ]
+	then
+		mkdir -p $3
+		if [ "$?" != "0" ]
+		then
+			${ECHO} "mkdir -p $3 failed"
+			ecode=1
+		fi
+		chmod -R 755 $3
+	fi
+	if [ "${CHECKUID}" = "" -a "${CHECKLOGIN}" = "" ]
+	then
+		${ECHO} "Adding $1 login ..."
+		if [ "$2" = "DC" ]
+		then
+			useradd -g $5 -d $3 -s $4 -c "$1 LOGIN" -m $1
+		else
+			useradd -u $2 -g $5 -d $3 -s $4 -c "$1 LOGIN" -m $1
+		fi
+		if [ "$?" != "0" ]
+		then
+			${ECHO} "Cannot add $1 login, continuing..."
+			ecode=1
+		fi
+	elif [ "${CHECKLOGINPRESENT}" = "$1" -a "$2" = "DC" -a "${CHECKSHELL}" = "$4" -a "${CHECKHOME}" = "$3" ]
+	then
+		${ECHO} "The '$1' login has already been added to system with UID ${CHECKUID}."
+	
+	elif [ "${CHECKUID}" = "$2" -a "${CHECKLOGIN}" = "$1" -a "${CHECKSHELL}" = "$4" -a "${CHECKHOME}" = "$3" ]
+	then
+		${ECHO} "The '$1' login has already been added to system."
+	else
+		if [ "$2" != "DC" -a "${CHECKUID}" != "$2" ]
+		then
+			${ECHO} "ERROR:  $1 login added but with wrong uid \"${CHECKUID}\"; should be $2"
+			ecode=1
+		fi
+		if [ "$2" != "DC" -a "${CHECKLOGIN}" != "$1" ]
+		then
+			${ECHO} "ERROR:  wrong login \"${CHECKLOGIN}\" for uid $2, login should be $1"
+			ecode=1
+		fi
+		if [ "${CHECKHOME}" != "$3" ]
+		then
+			${ECHO} "ERROR:  wrong home directory \"${CHECKHOME}\" for login $1, should be $3"
+			ecode=1
+		fi
+		if [ "${CHECKSHELL}" != "$4" ]
+		then
+			${ECHO} "ERROR:  $1 login not set up with $4"
+			ecode=1
+		fi
+	fi
+	rm -f $OFILE
+	return ${ecode}
+}
+
+############################################################################
+# checkhome username homedir action
+# if the user doesn't exist, it errors
+# checks if the username has homedir as its home directory
+# if not and action is null, it modifies it
+# if not and action is mod, it modifies it
+# if not and action is error, it errors
+############################################################################
+checkhome () {
+	ecode=0
+	OFILE=/tmp/user.$$
+	getent passwd $1 > $OFILE
+	if [ $? -eq 0 ]
+	then	
+		CHECKUID=$( grep "^$1:" $OFILE | cut -f3 -d: 2>/dev/null )
+		CHECKGID=$( grep "^$1:" $OFILE | cut -f4 -d: 2>/dev/null )
+		CHECKHOME=$( grep "^$1:" $OFILE | cut -f6 -d: 2>/dev/null )
+		
+		if [ "${CHECKHOME}" = "$2" ] 
+		then
+			if [ ! -d $2 ]
+			then
+				mkdir -p $2
+				if [ "$?" != "0" ]
+				then
+					${ECHO} "mkdir -p $2 failed"
+					ecode=1
+				fi
+				chown ${CHECKUID}:${CHECKGID} $2
+				chmod -R 755 $2
+			fi
+		else
+			# modify the user to set the new home dir and move any current home dir to there
+			usermod -d $2 -m $1
+			if [ "$?" != "0" ]
+			then
+				${ECHO} "usermod -d $2 -m $1 failed"
+				ecode=1
+			fi
+		fi
+	else
+		${ECHO} "user $1 doesn't exist"
+		ecode=1
+	fi
+	
+	rm -f $OFILE
+	return ${ecode}
+}
+
+##################################################################
+#checkloginsforpwds checks /etc/shadow for logins without passwords
+# the first argument is a list of logins to check
+##################################################################
+checkloginsforpwds () {
+	for i in $1
+	do
+		CHECK_LOGIN=$( grep "^${i}:" /etc/shadow | grep "!!" )
+		if [ "${CHECK_LOGIN}" != "" ]
+		then
+			NOPWD="${NOPWD} ${i}"
+		fi
+	done
+	
+	if [ "${NOPWD}" != "" ]
+	then
+	   ${ECHO} ""
+	   ${ECHO} "REMINDER:  The following logins must have a passwords assigned to them.\n"
+	   ${ECHO} "##############################################################"
+	   ${ECHO} "		${NOPWD}	"
+	   ${ECHO} "##############################################################"
+	   ${ECHO} ""
+	   ${ECHO} "           This must be done by executing the following command:"
+	   ${ECHO} ""
+	   ${ECHO} "           $ passwd <login>"
+	   ${ECHO} ""
+	   ${ECHO} "           After typing the \"passwd\" command you will be prompted for"
+	   ${ECHO} "           the password for the login."          
+	   ${ECHO} ""
+	fi
+}
+
+##################################################################
+# checkassignpasswords checks /etc/shadow for logins without passwords
+# and then asks the user to assign one
+# the first argument is a list of logins to check
+##################################################################
+checkassignpasswords () {
+	for i in $1
+	do
+		CHECK_LOGIN=$( grep "^${i}:" /etc/shadow | grep LK )
+		if [ "${CHECK_LOGIN}" != "" ]
+		then
+			${ECHO} "Please assign a password for the '${i}' login"
+			passwd ${i}
+			${ECHO}
+		fi
+	done
+}
+
+############################################################################
+# copywithperms origfile destfile owner group perms [save suffix]
+# copies origfile to destfile, giving destfile ownership and permssions
+# from owner, group, and perms.  If the sixth argument is "save", the
+# original is saved in the same place with the seventh argument as the
+# suffix.  If the seventh arg is null, $$ is used
+############################################################################
+copywithperms () {
+	SAVE=0
+	ECODE=0
+	if [ "$6" = "save" -a -f "$2" ]
+	then
+		if [ "$7" = "" ]
+		then
+			cp $2 $2.$$
+		else
+			cp $2 $2.$7
+		fi
+	fi
+	if [ -f $1 ]
+	then
+		cp $1 $2
+		ECODE=$?
+		chown ${3}:${4} $2
+		chmod $5 $2
+	else
+		${ECHO} "$1 is not a file.  No copy done!"
+	fi
+	return ${ECODE}
+}
+
+############################################################################
+# mkdirwithperms dirname owner group perms ifExist
+# makes directory dirname , giving dirname ownership and permssions
+# from owner, group, and perms.  
+# perms can be DC if you don't care
+# ifExist can be rm, error, dontcreate
+############################################################################
+mkdirwithperms () {
+	ECODE=0
+	if [ -f $1 ]
+	then
+		ECODE=1
+		${ECHO} "$1 exists but is a file.  No mkdir done!"
+	elif [ -d $1 ]
+	then
+		if [ "$5" = "rm" ]
+		then
+			rm -rf $1
+			mkdir -p $1
+			if [ "$?" != "0" ]
+			then
+				${ECHO} "mkdir -p $1 failed"
+				ECODE=1
+			fi
+		elif [ "$5" = "error" ]
+		then
+			ECODE=1
+			${ECHO} "$1 is a directory.  No mkdir done!"
+		elif [ "$5" != "dontcreate" ]
+		then
+			mkdir -p $1
+			if [ "$?" != "0" ]
+			then
+				${ECHO} "mkdir -p $1 failed"
+				ECODE=1
+			fi
+		fi
+	else
+		mkdir -p $1
+		if [ "$?" != "0" ]
+		then
+			${ECHO} "mkdir -p $1 failed"
+			ECODE=1
+		fi
+	fi
+	if [ "${ECODE}" = "0" ]
+	then
+		chown ${2}:${3} $1
+		if [ "$4" != "DC" ]
+		then
+			chmod $4 $1
+		fi
+	fi
+	return ${ECODE}
+}
+
+
+############################################################################
+# chownwithperms owner group file mode
+# changes the ownership and mode for the specified file
+############################################################################
+chownwithperms () {
+	chown ${1}:${2} $3
+	chmod $4 $3
+}
+
+verifywhosrunning () {
+	userid=$( id | cut -f2 -d"(" | cut -f1 -d")" )
+	if [ "${userid}" != "$1" ]
+	then
+		${ECHO} "You must be $1 to run $0"
+		exit 1
+	fi
+}
+
+replaceline() {
+
+	name=$1
+	value=$2
+	file=$3
+
+	if [ -z "${file}" ]
+	then
+		${ECHO} "replaceline: ERROR: insufficient arguments: $1 $2" >&2
+		return 1
+	fi
+
+	if [ -n "$4" ]
+	then
+		${ECHO} "replaceline: ERROR: too many arguments: $1 $2 $3 $4" >&2
+		return 1
+	fi
+
+	if [ -f ${file} ]
+	then
+		grep -v "^${name}=" ${file} > ${file}.$$
+		${ECHO} "${name}=${value}" >> ${file}.$$
+		mv -f ${file}.$$ ${file}
+	else 
+		${ECHO} "${name}=${value}" > ${file}
+	fi
+}
+
+replaceline_with_quotes() {
+
+	name=$1
+	value=$2
+	file=$3
+
+	if [ -z "${file}" ]
+	then
+		${ECHO} "replaceline: ERROR: insufficient arguments: $1 $2" >&2
+		return 1
+	fi
+
+	if [ -n "$4" ]
+	then
+		${ECHO} "replaceline: ERROR: too many arguments: $1 $2 $3 $4" >&2
+		return 1
+	fi
+
+	if [ -f ${file} ]
+	then
+		grep -v "^${name}=" ${file} > ${file}.$$
+		${ECHO} "${name}=\"${value}\"" >> ${file}.$$
+		mv -f ${file}.$$ ${file}
+	else 
+		${ECHO} "${name}=\"${value}\"" > ${file}
+	fi
+}
+
+# this deleteline will not actually delete the entry
+# but only delete the value leaving the name=
+# when siteconf.pl went from Boilerplate to Fillin,
+# we changed this because Fillin can handle null values.
+
+deleteline() {
+
+	name=$1
+	file=$2
+
+	if [ -z "${file}" ]
+	then
+		${ECHO} "deleteline: ERROR: insufficient arguments" >&2
+		return 1
+	fi
+
+	if [ -f ${file} ]
+	then
+		cp ${file} ${file}.$$
+		lno=$( grep -n "^${name}=" ${file} | cut -d: -f1 )
+		if [ "${lno}" != "" ] 
+		then
+			sed "${lno}d" ${file} > ${file}.$$
+		fi
+		${ECHO} "${name}=" >> ${file}.$$
+		mv -f ${file}.$$ ${file}
+	else 
+		${ECHO} "${name}=" > ${file}
+	fi
+}
+
+# dropline will drop the line from the file
+# unlike the deleteline function above
+
+dropline() {
+
+	name=$1
+	file=$2
+
+	if [ -z "${file}" ]
+	then
+		${ECHO} "dropline: ERROR: insufficient arguments" >&2
+		return 1
+	fi
+
+	if [ -f ${file} ]
+	then
+		grep -v "^${name}=" ${file} > ${file}.$$
+		mv -f ${file}.$$ ${file}
+	fi
+}
+
+pause_install() {
+
+	if [ "${Pause}" =  "1" ]
+	then
+		if ${chkyn} -y "Continue with ${Itype}?"
+		then
+			return 0
+		else
+			${ECHO} "${PNAME}: quitting" >&2
+			exit 1
+		fi
+	fi
+}
+
+get_ITYPE() {
+	ITYPE=$( ${chkyn} -fer ${q_flags} -h\? ${ITYPE:+-D"${ITYPE}"} -H \
+"	If you are doing a fresh install, answer 'I' or answer 'U' for upgrade." \
+"Is this a fresh 'install' or 'upgrade' (I or U):${ITYPE:+ [${ITYPE}]}" \
+	'^[IU]$' \
+'*** ERROR *** Entry must be I or U.' )
+}
+
+
+###
+# Change an /etc/group entry to allow a give user to change group into it.
+# arg1 = comma-sep group list (e.g., sylantro,other)
+# arg2 = user
+###
+addUserToGroup()
+{
+	if [ -z "$1" -o -z "$2" ]
+	then
+		${ECHO} "addUserToGroup failed, need two args, group and user"
+		return 1
+	else
+		usermod -G $1 $2
+	fi
+	return 0
+}
+
+################### BACKUP AND RESTORE METHODS ########################
+###################       VARIABLES          ##########################
+###################       VARIABLES          ##########################
+###################       VARIABLES          ##########################
+###################       VARIABLES          ##########################
+
+NO_FILE_INDICATOR="__NO_PREVIOUS_FILE__"
+SAVE_SUFFIX=${Project}save
+
+###################       SUBROUTINES        ##########################
+###################       SUBROUTINES        ##########################
+###################       SUBROUTINES        ##########################
+###################       SUBROUTINES        ##########################
+###################       SUBROUTINES        ##########################
+
+##############################################################################
+# Purpose:  make a backup copy of a file in such a way that the backup
+# won't be lost by re-running your script PLUS give you a predictable name
+# for the most recent back up to use when you roll back.
+#
+# Input:
+# - Arg1 = file to back up
+#
+# Requirement: 
+# - Remove $1.save before calling this function or else a copy won't be made.
+# - Make sure to set the value of env value TODAY to use as a suffix.
+#
+# Description:
+# Copy $1 to $1.${SAVE_SUFFIX}.${TODAY}, then link that to $1.save.
+#
+##############################################################################
+make_backup_copy ()
+{
+	if [ -z "${TODAY}" ]
+	then
+		${ECHO} "make_backup_copy - TODAY variable is unset" >&2
+		return 1
+	fi
+
+	if [ -f $1.${SAVE_SUFFIX}.${TODAY} -a -h $1.save ]
+	then
+		${ECHO} "Note: backup already exists for $1"
+	else
+		# if existing file doesn't exist, set up for later delete by rollback
+		if [ ! -f $1 -a ! -h $1 ]
+		then
+			${ECHO} ${NO_FILE_INDICATOR} > $1
+		fi
+		cp -p $1 $1.${SAVE_SUFFIX}.${TODAY}
+		ln -s $1.${SAVE_SUFFIX}.${TODAY} $1.save
+	fi
+}
+
+################################################################################
+# Purpose: Find the actual file that belongs to $1, which can be a symbolic 
+# link.
+# 
+# Input:
+# - Arg1 = path to file or link
+# - Arg2 = true if you want _SRCFILE to be null if no actual file is 
+#  	found.  If Arg2 is NOT true, then _SRCFILE is set to Arg1.
+# 
+# Side Effect:
+# Sets value of _SRCFILE variable
+################################################################################
+find_source_file ()
+{
+	if [ -z "$1" ]
+	then
+		${ECHO} "find_source_file - needs at least one argument" >&2
+		return 1
+	fi
+
+	ls -l $1 > /tmp/tls$$
+	cat /tmp/tls$$ | sed 's/  */	/g' |cut -f11 > /tmp/cuts$$
+	_SRCFILE=$( cat /tmp/cuts$$ )
+
+	if [ "$_SRCFILE" = "" ]
+	then
+		if [ "$2" != "true" ]
+		then
+			_SRCFILE=$1
+		fi
+	fi
+	rm -f /tmp/tls$$ /tmp/cuts$$
+}
+
+#######################################################################
+# Purpose: Expands template file using data in COPT variable.
+# Diffs expanded template against existing file and installs if different.
+# If arg5 = true, sets _config_changes=1 so you know that changes were installed
+#
+# Makes its own backup copy using make_backup_copy.
+# Does install if different using install_if_different.
+#
+# Input:
+# Arg1 = template path without .tmpl extension
+# Arg2 = install path
+# Arg3 = owner and group (e.g., root:other)
+# Arg4 = permissions (e.g., 750)
+# Arg5 = true/false, if expanded file is different than installed .
+#		Set _config_changes to 1 if Arg5 is true.  Otherwise, don't touch 
+#		_config_changes
+# 
+# Requirement: set COPT to the value of the -c option to siteconf.pl
+#
+# Side Effect: sets _config_changes=1 if changes were installed
+#######################################################################
+install_from_template () 
+{
+	if [ -z "${COPT}" ]
+	then
+		${ECHO} "install_from_template - COPT is unset" >&2
+		return 1
+	fi
+
+	TMPL=$( basename ${1} )
+	OFILE=/tmp/${TMPL}
+	if [ -f ${1}.tmpl ]
+	then
+
+		${PROJECT_HOME}/bin/siteconf.pl -t ${1}.tmpl -c ${COPT} -o ${OFILE}
+		install_if_different ${OFILE} ${2} ${3} ${4} ${5}
+
+	else
+		${ECHO} "install_from_template: ERROR: Missing ${TMPL}.tmpl" >&2
+	fi
+	rm -f ${OFILE}
+}
+
+
+#######################################################################
+# Purpose: Copies source to destination if the two are different.
+# If arg5 = true, sets _config_changes=1 so you know that changes were installed
+#
+# Makes its own backup copy using make_backup_copy.
+#
+# Input:
+# Arg1 = source path
+# Arg2 = install path
+# Arg3 = owner and group (e.g., root:other)
+# Arg4 = permissions (e.g., 750)
+# Arg5 = true/false, if expanded file is different than installed .
+#		Set _config_changes to 1 if Arg5 is true.  Otherwise, don't touch 
+#		_config_changes
+# 
+# Side Effect: sets _config_changes=1 if changes were installed
+#######################################################################
+install_if_different()
+{
+		# Take backup before changing.
+		# Only change if different.
+		if [ -f ${2} ]
+		then
+			diff ${1} ${2} > /dev/null
+			diffrc=$?
+			if [ "${diffrc}" != "0" ]
+			then
+				${ECHO} "Installing ${2}"
+				make_backup_copy ${2}
+				mv -f ${1} ${2}
+				chown ${3} ${2}
+				chmod ${4} ${2}
+				if [ "${5}" = "true" ]
+				then
+					_config_changes=1
+				fi
+			fi
+		else
+			# creates backup containing ${NO_FILE_INDICATOR} for rollback removal
+			make_backup_copy ${2}  
+			mv -f ${1} ${2}
+			chown ${3} ${2}
+			chmod ${4} ${2}
+			if [ "${5}" = "true" ]
+			then
+				_config_changes=1
+			fi
+		fi
+}
+###################################################################
+# Purpose: rollback a file whose backup was made with make_backup_copy
+#
+# Input:
+# Arg1 is path of installed file. Subroutine will look for ${1}.save
+# Arg2 = true/false, if expanded file is different than installed, 
+#		set _config_changes to 1 if Arg2 is true.  Otherwise, don't touch 
+#		_config_changes
+#
+# Side Effect: sets _config_changes=1 if changes were rolled back
+###################################################################
+rollback_from_save ()
+{
+	if [ -f ${1}.save -o -h ${1}.save ]
+	then
+		find_source_file ${1}.save false
+		${ECHO} "rollback_from_save: rolling back to $( basename ${_SRCFILE} )"
+		grep ${NO_FILE_INDICATOR} ${_SRCFILE} > /dev/null
+		if [ $? -eq 0 ]
+		then
+			rm -f ${_SRCFILE} ${1}
+		else
+			mv -f ${_SRCFILE} ${1}
+		fi
+		if [ "${2}" = "true" ]
+		then
+			_config_changes=1
+		fi
+		rm -f ${1}.save
+	fi
+}
diff --git a/aai-traversal/src/main/scripts/install/siteconf.pl b/aai-traversal/src/main/scripts/install/siteconf.pl
new file mode 100644
index 0000000..d035851
--- /dev/null
+++ b/aai-traversal/src/main/scripts/install/siteconf.pl
@@ -0,0 +1,100 @@
+#!/usr/bin/perl
+# CC_ID_SITECONF_PL[] = "@(#)/vobs/waas/src/oam/siteconf.pl@@/main/4"
+
+#.Description
+# This perl script takes as input template file, 
+# and one or more configuration files.  It uses the values in the 
+# configuration files as substitutions for the matching tags in the template 
+# file.
+
+#.Constraints
+# The input files must be readable by the script.
+
+#.See Also
+#
+
+use Getopt::Std;
+
+local $dbg=0;
+
+getopts ('dt:c:');
+
+if ($opt_d) {
+	$dbg=$opt_d;
+}
+
+if ($dbg) {
+	print STDERR "opt_d=$opt_d\n";
+	print STDERR "opt_t=$opt_t\n";
+	print STDERR "opt_c=$opt_c\n";
+}
+
+###
+# Print usage if no arguments passed
+if (! $opt_t) {
+	print STDERR "Usage:  $0 -t templatefile -c configfilelist\n";
+	exit (1);
+}
+
+# process the template file variable
+if ($opt_t) {
+	if (! -r $opt_t) {
+		print STDERR "Error:  Can't read template file $opt_t\n";
+		exit (2);
+	}
+	$templatefile = $opt_t;
+}
+else {
+	print STDERR "Error:  You must enter the template file name\n";
+	exit (2);
+}
+
+###
+# Global error flag for return code when exiting
+$err = 0;
+
+$configlist = '';
+if ($opt_c) {
+	$configlist = $opt_c;
+}
+
+# process the site configuration file variable
+if ($configlist) {
+	@siteary = split /,/, $configlist; 
+}
+
+# Add PROJECT_HOME to Conf dictionary
+$Conf{'PROJECT_HOME'} = $ENV{'PROJECT_HOME'};
+
+foreach $arg (@siteary) {
+	if ($dbg) { print STDERR "Opening $arg\n" }
+
+	open(CONF, $arg) || die $!, ", '$arg'\n";
+
+	while (<CONF>) {
+	    #1 while chomp();
+	    $_ =~ s/[\r\n]$//g; # strip newlines and dos-injected carriage returns
+		if ( /=/ ) {
+			($attr,$value) = split(/=/,$_,2);
+			$value =~ s/\$PHOME/$ENV{'PROJECT_HOME'}/;
+			$value =~ s/\$PROJECT_HOME/$ENV{'PROJECT_HOME'}/;
+			$Conf{$attr} = $value;
+		}
+	}
+
+	close CONF;
+}
+
+if ($dbg) { print STDERR "Expanding $templatefile\n" }
+
+# Expand a config file 
+
+open(TEMPLATE, $templatefile) || die $!, ", '$templatefile'\n";
+while (<TEMPLATE>) {
+	# handle strings such as @HTTP_ROOT@@HTTP_PORT@
+	s/@(\w+)@/$Conf{$1}/g;
+	print;
+}
+	
+close TEMPLATE;
+
diff --git a/aai-traversal/src/main/scripts/install/updateQueryData.sh b/aai-traversal/src/main/scripts/install/updateQueryData.sh
new file mode 100644
index 0000000..798d5b8
--- /dev/null
+++ b/aai-traversal/src/main/scripts/install/updateQueryData.sh
@@ -0,0 +1,97 @@
+#!/bin/ksh
+
+###
+# ============LICENSE_START=======================================================
+# org.openecomp.aai
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+PROGNAME=$(basename $0)
+PROJECT_HOME=/opt/app/aai-traversal
+OUTFILE=$PROJECT_HOME/logs/misc/${PROGNAME}.log.$(date +\%Y-\%m-\%d)
+
+TS=$(date "+%Y-%m-%d %H:%M:%S")
+
+CHECK_USER="aaiadmin"
+userid=$( id | cut -f2 -d"(" | cut -f1 -d")" )
+if [ "${userid}" != $CHECK_USER ]; then
+    echo "You must be  $CHECK_USER to run $0. The id used $userid."
+    exit 1
+fi 
+
+error_exit () {
+	echo "${PROGNAME}: failed for ${1:-"Unknown error"} on cmd $2" 1>&2
+	echo "${PROGNAME}: failed for ${1:-"Unknown error"} on cmd $2" >> $OUTFILE
+#	exit ${2:-"1"}
+}
+
+j=0
+for filepath in `ls $PROJECT_HOME/bundleconfig/etc/scriptdata/widget-model-json/*.json|sort -f`
+do
+j=$(expr "$j" + 1)
+filename=$(basename $filepath)
+echo "Begin putTool for widget $filename" | tee -a $OUTFILE
+vers=`grep model-invariant-id $filepath|cut -d':' -f2|cut -d'"' -f2`
+# last parameter will skip put if it exists
+resource=service-design-and-creation/models/model/$vers
+$PROJECT_HOME/scripts/putTool.sh $resource $filepath 412 >> $OUTFILE 2>&1 || error_exit "$resource $filepath" $j
+echo "End putTool for widget $filename" | tee -a $OUTFILE
+done
+
+j=0
+for filepath in `ls $PROJECT_HOME/bundleconfig/etc/scriptdata/named-query-json/*.json|sort -f`
+do
+j=$(expr "$j" + 1)
+filename=$(basename $filepath)
+echo "Begin putTool for named-query $filename" | tee -a $OUTFILE
+vers=`grep named-query-uuid $filepath|cut -d':' -f2|cut -d'"' -f2`
+# last parameter will skip put if it exists
+resource=service-design-and-creation/named-queries/named-query/$vers
+$PROJECT_HOME/scripts/putTool.sh $resource $filepath 412 >> $OUTFILE 2>&1 || error_exit "$resource $filepath" $j
+echo "End putTool for named-query $filename" | tee -a $OUTFILE
+done
+
+j=0
+for filepath in `ls $PROJECT_HOME/bundleconfig/etc/scriptdata/resource-model-json/*.json|sort -f`
+do
+j=$(expr "$j" + 1)
+filename=$(basename $filepath)
+echo "Begin putTool for resource model $filename" | tee -a $OUTFILE
+vers=`grep model-invariant-id $filepath|cut -d':' -f2|cut -d'"' -f2`
+# last parameter will skip put if it exists
+resource=service-design-and-creation/models/model/$vers
+$PROJECT_HOME/scripts/putTool.sh $resource $filepath 412 >> $OUTFILE 2>&1 || error_exit "$resource $filepath" $j
+echo "End putTool for resource model $filename" | tee -a $OUTFILE
+done
+
+j=0
+for filepath in `ls $PROJECT_HOME/bundleconfig/etc/scriptdata/service-model-json/*.json|sort -f`
+do
+j=$(expr "$j" + 1)
+filename=$(basename $filepath)
+echo "Begin putTool for service model $filename" | tee -a $OUTFILE
+vers=`grep model-invariant-id $filepath|cut -d':' -f2|cut -d'"' -f2`
+# last parameter will skip put if it exists
+resource=service-design-and-creation/models/model/$vers
+$PROJECT_HOME/scripts/putTool.sh $resource $filepath 412 >> $OUTFILE 2>&1 || error_exit "$resource $filepath" $j
+echo "End putTool for service model $filename" | tee -a $OUTFILE
+done
+
+echo "$PROGNAME completed ${TS}" | tee -a $OUTFILE
+echo "See output and error file: $OUTFILE"
+
+exit 0