Update traversal to use schema ingest library

Update the traversal microservice to use the ingest
library to make the application more model driven

Issue-ID: AAI-1465
Change-Id: Ifcf56b5d0e7f25ce2bc735b3186e09bc28234100
Signed-off-by: Kajur, Harish (vk250x) <vk250x@att.com>

1 files changed, 0 insertions, 140 deletions

diff --git a/aai-traversal/src/main/resources/etc/sysprops/sys-props.properties b/aai-traversal/src/main/resources/etc/sysprops/sys-props.properties
deleted file mode 100644
index 44d58d5..0000000
--- a/aai-traversal/src/main/resources/etc/sysprops/sys-props.properties
+++ /dev/null
@@ -1,140 +0,0 @@
-#This file is used for defining AJSC system properties for different configuration schemes and is necessary for the AJSC to run properly.
-#The sys-props.properties file is used for running locally. The template.sys-props.properties file will be used when deployed
-#to a SOA/CSI Cloud node.
-
-#AJSC System Properties. The following properties are required for ALL AJSC services. If you are adding System Properties for your
-#particular service, please add them AFTER all AJSC related System Properties. 
-
-#For Cadi Authorization, use value="authentication-scheme-1
-CadiAuthN=authentication-scheme-1
-
-#For Basic Authorization, use value="authentication-scheme-1
-authN=authentication-scheme-2
-
-#Persistence used for AJSC meta-data storage. For most environments, "file" should be used.
-ajscPersistence=file
-
-# If using hawtio for local development, these properties will allow for faster server startup and usage for local development
-hawtio.authenticationEnabled=false
-hawtio.config.pullOnStartup=false
-
-#Removes the extraneous restlet console output
-org.restlet.engine.loggerFacadeClass=org.restlet.ext.slf4j.Slf4jLoggerFacade
-
-#server.host property to be enabled for local DME2 related testing
-#server.host=<Your network IP address> 
-
-#Enable/disable SSL (values=true/false). This property also determines which protocol to use (https if true, http otherwise), to register services into GRM through DME2.
-enableSSL=false
-
-#Enable/disable csi logging (values=true/false). This can be disabled during local development
-csiEnable=false
-
-#Enable/disable EJB Container
-ENABLE_EJB=false
-
-#Enable/disable OSGI
-isOSGIEnable=false
-
-#Configure JMS Queue (WMQ/TIBCO)
-JMS_BROKER=WMQ
-
-#JMS properties needed for CSI Logging
-JMS_TIBCO_PROVIDER_URL=ONAPserverTBD
-JMS_LOGGER_USER_NAME=spm2
-JMS_LOGGER_PASSWORD=its4test
-JMS_LOGGER_AUDIT_QUEUE_BINDING=pub.m2e.audit.logger.queue
-JMS_LOGGER_PERF_QUEUE_BINDING=log.csi.performance02
-
-#WMQ connectivity
-JMS_WMQ_PROVIDER_URL=aftdsc://AFTUAT/34.07/-84.28
-JMS_WMQ_CONNECTION_FACTORY_NAME=aftdsc://AFTUAT/?service=CSILOG,version=1.0,bindingType=fusionBus,envContext=Q,Q25A=YES
-JMS_WMQ_INITIAL_CONNECTION_FACTORY_NAME=com.att.aft.jms.FusionCtxFactory
-JMS_WMQ_AUDIT_DESTINATION_NAME=queue:///CSILOGQL.M2E.DASHBOARD01.NOT.Q25A
-JMS_WMQ_PERF_DESTINATION_NAME=queue:///CSILOGQL.M2E.PERFORMANCE01.NOT.Q25A
-
-
-#CSI related variables for CSM framework
-csm.hostname=d1a-m2e-q112m2e1.edc.cingular.net
-
-#Enable/disable endpoint level logging (values=true/false). This can be disabled during local development
-endpointLogging=false
-
-#SOA_CLOUD_ENV is used to register your service with dme2 and can be turned off for local development (values=true/false).
-SOA_CLOUD_ENV=false
-
-#CONTINUE_ON_LISTENER_EXCEPTION will exit the application if there is a DME2 exception at the time of registration.
-CONTINUE_ON_LISTENER_EXCEPTION=false
-
-#Jetty Container ThreadCount Configuration Variables
-AJSC_JETTY_ThreadCount_MIN=10
-AJSC_JETTY_ThreadCount_MAX=500
-AJSC_JETTY_IDLETIME_MAX=60000
-AJSC_JETTY_BLOCKING_QUEUE_SIZE=100
-
-#Camel Context level default threadPool Profile configuration
-CAMEL_POOL_SIZE=10
-CAMEL_MAX_POOL_SIZE=20
-CAMEL_KEEP_ALIVE_TIME=60
-CAMEL_MAX_QUEUE_SIZE=1000
-
-#File Monitor configurations
-ssf_filemonitor_polling_interval=5
-ssf_filemonitor_threadpool_size=10
-
-#GRM/DME2 System Properties
-AFT_DME2_CONN_IDLE_TIMEOUTMS=5000
-AJSC_ENV=SOACLOUD
-
-SOACLOUD_NAMESPACE=com.att.ajsc
-SOACLOUD_ENV_CONTEXT=DEV
-SOACLOUD_PROTOCOL=http
-SOACLOUD_ROUTE_OFFER=DEFAULT
-
-sslport=8446
-server.port=8083
-
-AFT_LATITUDE=23.4
-AFT_LONGITUDE=33.6
-AFT_ENVIRONMENT=AFTUAT
-
-#Restlet Component Default Properties
-RESTLET_COMPONENT_CONTROLLER_DAEMON=true
-RESTLET_COMPONENT_CONTROLLER_SLEEP_TIME_MS=100
-RESTLET_COMPONENT_INBOUND_BUFFER_SIZE=8192
-RESTLET_COMPONENT_MIN_THREADS=1
-RESTLET_COMPONENT_MAX_THREADS=10
-RESTLET_COMPONENT_LOW_THREADS=8
-RESTLET_COMPONENT_MAX_QUEUED=0
-RESTLET_COMPONENT_MAX_CONNECTIONS_PER_HOST=-1
-RESTLET_COMPONENT_MAX_TOTAL_CONNECTIONS=-1
-RESTLET_COMPONENT_OUTBOUND_BUFFER_SIZE=8192
-RESTLET_COMPONENT_PERSISTING_CONNECTIONS=true
-RESTLET_COMPONENT_PIPELINING_CONNECTIONS=false
-RESTLET_COMPONENT_THREAD_MAX_IDLE_TIME_MS=60000
-RESTLET_COMPONENT_USE_FORWARDED_HEADER=false
-RESTLET_COMPONENT_REUSE_ADDRESS=true
-
-#Externalized jar and properties file location. In CSI environments, there are a few libs that have been externalized to aid
-#in CSTEM maintenance of the versions of these libs. The most important to the AJSC is the DME2 lib. Not only is this lib necessary
-#for proper registration of your AJSC service on a node, but it is also necessary for running locally as well. Another framework
-#used in CSI envs is the CSM framework. These 2 framework libs are shown as "provided" dependencies within the pom.xml. These
-#dependencies will be copied into the target/commonLibs folder with the normal "mvn clean package" goal of the AJSC. They will
-#then be added to the classpath via AJSC_EXTERNAL_LIB_FOLDERS system property. Any files (mainly property files) that need
-#to be on the classpath should be added to the AJSC_EXTERNAL_PROPERTIES_FOLDERS system property. The default scenario when 
-#testing your AJSC service locally will utilize the target/commonLibs directory for DME2 and CSM related artifacts and 2 
-#default csm properties files will be used for local testing with anything CSM knorelated.
-#NOTE: we are using maven-replacer-plugin to replace "(doubleUnderscore)basedir(doubleUnderscore)" with ${basedir} within the 
-#target directory for running locally. Multiple folder locations can be separated by the pipe ("|") character.
-#Please, NOTE: for running locally, we are setting this system property in the antBuild/build.xml "runLocal" target and in the 
-#"runAjsc" profile within the pom.xml. This is to most effectively use maven variables (${basedir}, most specifically. Therefore,
-#when running locally, the following 2 properties should be set within the profile(s) themselves. 
-#Example: target/commonLibs|target/otherLibs
-#AJSC_EXTERNAL_LIB_FOLDERS=__basedir__/target/commonLibs
-#AJSC_EXTERNAL_PROPERTIES_FOLDERS=__basedir__/ajsc-shared-config/etc
-#End of AJSC System Properties
-
-#Service System Properties. Please, place any Service related System Properties below.
-KEY_STORE_PASSWORD=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
-KEY_MANAGER_PASSWORD=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
-AAI_CORE_VERSION=1.2.0-SNAPSHOT