aboutsummaryrefslogtreecommitdiffstats
path: root/aai-traversal/ajsc-shared-config/etc/csm-config-app.properties
diff options
context:
space:
mode:
authorVenkata Harish K Kajur <vk250x@att.com>2017-05-12 17:36:59 -0400
committerVenkata Harish K Kajur <vk250x@att.com>2017-05-12 17:37:13 -0400
commitb5b99b72733ca5c064b46fdf4527ace28b8b545b (patch)
treeb1606e7d824e5d56b3530f724bf7bf326f9a7833 /aai-traversal/ajsc-shared-config/etc/csm-config-app.properties
parentb6a2b26886ac329dd0836270127c1b9d283c3659 (diff)
Add all of the traversal source files
Change-Id: Id31f4bdda9c86f782f86829f8b86dada959a9729 Signed-off-by: Venkata Harish K Kajur <vk250x@att.com>
Diffstat (limited to 'aai-traversal/ajsc-shared-config/etc/csm-config-app.properties')
-rw-r--r--aai-traversal/ajsc-shared-config/etc/csm-config-app.properties183
1 files changed, 183 insertions, 0 deletions
diff --git a/aai-traversal/ajsc-shared-config/etc/csm-config-app.properties b/aai-traversal/ajsc-shared-config/etc/csm-config-app.properties
new file mode 100644
index 0000000..b4d0476
--- /dev/null
+++ b/aai-traversal/ajsc-shared-config/etc/csm-config-app.properties
@@ -0,0 +1,183 @@
+Global.ExtendedProperty.AuthoritativeServers=${ChangeMe_csm.acfshost}:${ChangeMe_csm.acfsport}
+
+#
+# The settings in this file control the behavior of the CSM Framework.
+# The majority of the settings in this file adhere to the following
+# pattern:
+#
+# [EntityType].[EntityId].[PropertyName]=[PropertyValue]
+#
+# Where:
+#
+# [EntityType] Identifies the type of entity (service or
+# service group) that's being configured.
+# [EntityId] Identifies the individual entity.
+# [PropertyName] Identifies the property that is being set.
+# [PropertyValue] Is the actual property value.
+#
+# In the formatting sample above, the EntityType can be setto one of the
+# following values:
+#
+# * 'Service' if an individual service is being configured.
+# * 'Group 'if a service group is being configured.
+#
+# The reference to 'entity' in the above description is intentionally
+# generic. The CSM Framework supports the configuration of individual
+# services as well as groups of services. The type of entity that is
+# actually being configured is determined by the value of the
+# [EntityType] portion of the property.
+#
+# There are two values for [EntityId] that have a special meaning within
+# the CSM Framework:
+#
+#
+# DefaultService - Identifies the default configuration for any service
+# that is not explicitly configured elsewhere in this file.
+#
+# DefaultServiceGroup - This identifies the entity that provides the
+# default configuration for any service group that is not explicitly
+# configured elsewhere in this file.
+#
+# DO NOT use either of these as the identifier for any of your
+# application-specific services or service groups.
+#
+# The CSM Framework treats all entity identifiers in a case-insensitive
+# manner. The entity ids 'Service1' and 'SERVICE1' are equivalant. All
+# properties with the same [EntityId] will be applied to the same
+# configuration. The CSM Framework framework also treats property names
+# in a case-insensitive manner. 'MaxRequestCount' and 'MAXREQUESTCOUNT'
+# are considered equivalent within the CSM framework.
+#
+# The following properties are supported by the CSM Framework. Any
+# properties that are entity-specific will include the '[EntityId].'
+# prefix.
+#
+# [EntityType].[EntityId].Enabled - Indicates if the entity is enabled
+# or disabled by default. The value of this property must be either
+# 'true' or 'false'.
+#
+# [EntityType].[EntityId].MaxRequestCount - The maximum number of
+# requests that can be running at any point in time. Once this limit is
+# reached, the service is considered to be 'flooded', and subsequent
+# requests are refused until the request count drops to the level
+# specified by the RestartThreshold property. Once the restart
+# threshold is reached, the service will be 'restarted' based on the
+# values of the 'RestartFrequency' and 'RestartIncrement' properties.
+# The value of this property must be a numeric value.
+# The default value for this property is 20.
+#
+# [EntityType].[EntityId].MaxStalledRequestCount - the maximum number of
+# 'stalled' requests that are allowed before subsequent requests are
+# refused
+# The value of this property must be a numeric value.
+# The default value for this property is 10.
+#
+# [EntityType].[EntityId].RestartThreshold - the process count level at
+# which requests will be allowed to proceed whenever a service becomes
+# 'flooded'. This property is only used if the total process count
+# reaches the level set by the 'MaxRequestCount' property. Once that
+# occurs, subsequent requests will be refused until the active request
+# count drops to the level specified by this property. Once the active
+# request count drops to the level specified by this property, the
+# service will be 'restarted' based on the values of the
+# 'RestartFrequency' and 'RestartIncrement' properties. To cause the
+# CSM framework to allow subsequent requests to proceed as soon as the
+# active request count drops below level level set by the
+# 'MaxRequestCount' property, just set this property to either -1 or 1
+# less than the value of the 'MaxRequestCount' property.
+# The value of this property must be a numeric value.
+# The default value for this property is -1.
+#
+# [EntityType].[EntityId].RestartIncrement - This property, along with
+# the 'RestartFrequency' property helps determine how quickly the active
+# request count will rise to the 'maximum request count' whenever a
+# service is 'restarted' after becoming 'flooded'. The
+# 'RestartFrequency' property determines how frequenty the permissable
+# number of active requests will be increased. This property determines
+# how much the permissible number of active requests will increase by
+# whenever it is raised. If this property is set to a positive value,
+# then the 'RestartFrequency' property must also be set to a positive
+# value. If this property is set to 0, then the 'RestartFrequency'
+# property must also be set to 0. In other words, either both
+# properties are 0 or both properties are greater than 0. When both
+# properties are set to 0, then the permissable number of active
+# requests immediately rises back up to the maximum request count once
+# it has droppedback down to the 'restart threshold'. When both
+# properties are greater than 0, then the permissable number of active
+# requests gradually rises to the maximum request count.
+# The value of this property must be a numeric value greater than or equal to 0.
+# The default value for this property is 0.
+#
+# [EntityType].[EntityId].RestartFrequency - This property, along with
+# the 'RestartIncrement' property helps determine how quickly the active
+# request count will rise to the 'maximum request count' whenever a
+# service is 'restarted' after becoming 'flooded'. The
+# 'RestartIncrement' property determines how quickly the permissable
+# number of active requests will be increased. This property determines
+# how frequently that increase will occur. If this property is set to
+# a positive value, then the 'RestartIncrement' property must also be
+# set to a positive value. If this property is set to 0, then the
+# 'RestartIncrement' property must also be set to 0. In other words,
+# either both properties are 0 or both properties are greater than 0.
+# When both properties are set to 0, then the permissable number of
+# active requests immediately rises back up to the maximum request count
+# once it has droppedback down to the 'restart threshold'. When both
+# properties are greater than 0, then the permissable number of active
+# requests gradually rises to the maximum request count.
+# The value of this property must be a numeric value greater than or equal to 0.
+# The default value for this property is 0.
+#
+# [EntityType].[EntityId].ServiceGroupId - This property is only
+# relevant for entities that are configured as services (i.e. the
+# [EntityType] portion of the property is set to 'Service'). When the
+# 'ServiceGroupId' property is set to a non-blank value, the behavior of
+# the service is controled by the configuration of the corresponding
+# service group. There is no default value for this property.
+#
+# [EntityType].[EntityId].Timeout - the timeout, in milliseconds, for
+# each process that is controlled by this configuration. Once the
+# duration of a process exceeds this value, the process will be
+# considered to have entered a 'stalled' state. The default value for
+# this property is 10000.
+#
+# FrameworkEnabled: - This is the one property that is not specific to a
+# single entity. This property determines whether the entire CSM
+# Framework is enabled or disabled. When disabled, the CSM Framework
+# does not track any process counts. All requests to access a service
+# are allowed, regardless of the current level of activity. The value
+# of this property must be either 'true' or 'false'.
+#
+
+#
+# Enables the CSM Framework so that it can manage interactions with external
+# services and/or resources. To disable the CSM Framework, simply set
+# this property to false.
+#
+FrameworkEnabled=true
+
+#
+# These are the default settings for any service that is no explicitly configured
+# below. A few things to note about this configuration:
+# 1) The "Enabled" property is not explicitly set. Instead, we are relying
+# on the default value of 'true'.
+# 2) The Timeout and Type properties are also not explicitly set. Again, we
+# are relying on the default values for these properties.
+#
+Service.DefaultService.Enabled=true
+Service.DefaultService.MaxRequestCount=30
+Service.DefaultService.MaxStalledRequestCount=20
+Service.DefaultService.Timeout=30000
+Service.DefaultService.RestartThreshold=-1
+Service.DefaultService.AutoPurgeAfter=150000
+
+
+#
+# These are the default settings for any service group that is referenced in
+# a service configuration but not configured below.
+#
+# Currently CSI does not use any service group configurations!
+#
+#Group.DefaultGroup.MaxRequestCount=-1
+#Group.DefaultGroup.MaxStalledRequestCount=-1
+#Group.DefaultGroup.RestartThreshold=-1
+#Group.DefaultGroup.Timeout=-1