summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xdeploy_vm1.sh21
-rwxr-xr-xdeploy_vm2.sh22
-rw-r--r--docker-compose-app.yml68
-rw-r--r--docker-compose-db.yml19
-rw-r--r--elasticsearch/config/elasticsearch.yml400
-rwxr-xr-xsearch-data-service/appconfig/elastic-search.properties2
6 files changed, 523 insertions, 9 deletions
diff --git a/deploy_vm1.sh b/deploy_vm1.sh
index 09ddfff..19b243d 100755
--- a/deploy_vm1.sh
+++ b/deploy_vm1.sh
@@ -9,6 +9,9 @@ fi
export RESOURCES_LOGS="/opt/aai/logroot/AAI-RESOURCES";
export TRAVERSAL_LOGS="/opt/aai/logroot/AAI-TRAVERSAL";
+export SEARCH_LOGS="/opt/aai/logroot/AAI-SEARCH";
+export DATA-ROUTER_LOGS="/opt/aai/logroot/AAI-DATA-ROUTER";
+export MODEL-LOADER_LOGS="/opt/aai/logroot/AAI-MODEL-LOADER";
if [ ! -d "$RESOURCES_LOGS" ];
then
@@ -22,6 +25,24 @@ then
mkdir -p $TRAVERSAL_LOGS;
fi;
+if [ ! -d "$SEARCH_LOGS" ];
+then
+ echo "Warning: Unable to find the volume directory $SEARCH_LOGS so creating it as regular directory";
+ mkdir -p $SEARCH_LOGS;
+fi;
+
+if [ ! -d "$DATA-ROUTER_LOGS" ];
+then
+ echo "Warning: Unable to find the volume directory $DATA-ROUTER_LOGS so creating it as regular directory";
+ mkdir -p $DATA-ROUTER_LOGS;
+fi;
+
+if [ ! -d "$MODEL-LOADER_LOGS" ];
+then
+ echo "Warning: Unable to find the volume directory $MODEL-LOADER_LOGS so creating it as regular directory";
+ mkdir -p $MODEL-LOADER_LOGS;
+fi;
+
export MTU=${MTU:-1500};
export DOCKER_REGISTRY="${DOCKER_REGISTRY:-localhost:5000}";
export HBASE_IMAGE="${HBASE_IMAGE:-wc9368/aai-hbase-1.2.3}";
diff --git a/deploy_vm2.sh b/deploy_vm2.sh
index 305a2b2..d890528 100755
--- a/deploy_vm2.sh
+++ b/deploy_vm2.sh
@@ -9,6 +9,9 @@ fi
export RESOURCES_LOGS="/opt/aai/logroot/AAI-RESOURCES";
export TRAVERSAL_LOGS="/opt/aai/logroot/AAI-TRAVERSAL";
+export SEARCH_LOGS="/opt/aai/logroot/AAI-SEARCH";
+export DATA-ROUTER_LOGS="/opt/aai/logroot/AAI-DATA-ROUTER";
+export MODEL-LOADER_LOGS="/opt/aai/logroot/AAI-MODEL-LOADER";
if [ ! -d "$RESOURCES_LOGS" ];
then
@@ -22,6 +25,24 @@ then
mkdir -p $TRAVERSAL_LOGS;
fi;
+if [ ! -d "$SEARCH_LOGS" ];
+then
+ echo "Warning: Unable to find the volume directory $SEARCH_LOGS so creating it as regular directory";
+ mkdir -p $SEARCH_LOGS;
+fi;
+
+if [ ! -d "$DATA-ROUTER_LOGS" ];
+then
+ echo "Warning: Unable to find the volume directory $DATA-ROUTER_LOGS so creating it as regular directory";
+ mkdir -p $DATA-ROUTER_LOGS;
+fi;
+
+if [ ! -d "$MODEL-LOADER_LOGS" ];
+then
+ echo "Warning: Unable to find the volume directory $MODEL-LOADER_LOGS so creating it as regular directory";
+ mkdir -p $MODEL-LOADER_LOGS;
+fi;
+
export MTU=${MTU:-1500};
export HBASE_IMAGE="${HBASE_IMAGE:-wc9368/aai-hbase-1.2.3}";
#export HBASE_IMAGE="${HBASE_IMAGE:-harisekhon/hbase}";
@@ -60,4 +81,3 @@ wait_for_container $HBASE_CONTAINER_NAME '^starting regionserver';
GREMLIN_CONTAINER_NAME=$($DOCKER_COMPOSE_CMD up -d aai.gremlinserver.simpledemo.openecomp.org 2>&1 | grep 'Creating' | awk '{ print $2; }' | head -1);
wait_for_container $GREMLIN_CONTAINER_NAME 'Channel started at port 8182';
-
diff --git a/docker-compose-app.yml b/docker-compose-app.yml
index a149047..3ae78ce 100644
--- a/docker-compose-app.yml
+++ b/docker-compose-app.yml
@@ -9,9 +9,9 @@ services:
- CHEF_BRANCH=master
- CHEF_GIT_URL=http://gerrit.onap.org/r/aai
- AAI_CORE_VERSION=1.1.0-SNAPSHOT
- ports:
+ ports:
- 8447:8447
- volumes:
+ volumes:
- ${RESOURCES_LOGS}:/opt/aai/logroot/AAI-RES
logging:
driver: "json-file"
@@ -27,9 +27,9 @@ services:
- CHEF_BRANCH=master
- CHEF_GIT_URL=http://gerrit.onap.org/r/aai
- AAI_CORE_VERSION=1.1.0-SNAPSHOT
- volumes:
+ volumes:
- ${TRAVERSAL_LOGS}:/opt/aai/logroot/AAI-GQ
- ports:
+ ports:
- 8446:8446
logging:
driver: "json-file"
@@ -39,9 +39,9 @@ services:
aai.api.simpledemo.openecomp.org:
image: ${AAI_HAPROXY_IMAGE}
hostname: aai.api.simpledemo.openecomp.org
- ports:
+ ports:
- 8443:8443
- links:
+ links:
- aai-resources.api.simpledemo.openecomp.org
- aai-traversal.api.simpledemo.openecomp.org
volumes:
@@ -51,8 +51,62 @@ services:
options:
max-size: "30m"
max-file: "5"
+
+ aai.searchservice.simpledemo.openecomp.org:
+ image: ${DOCKER_REGISTRY}/openecomp/search-data-service
+ hostname: aai.searchservice.simpledemo.openecomp.org
+ volumes:
+ - ${SEARCH_LOGS}:/logs
+ - /opt/app/search-data-service/appconfig:/opt/app/search-data-service/config
+ ports:
+ - 9509:9509
+ environment:
+ - CONFIG_HOME=/opt/app/search-data-service/config/
+ - KEY_STORE_PASSWORD=OBF:1y0q1uvc1uum1uvg1pil1pjl1uuq1uvk1uuu1y10
+ - KEY_MANAGER_PASSWORD=OBF:1y0q1uvc1uum1uvg1pil1pjl1uuq1uvk1uuu1y10
+ logging:
+ driver: "json-file"
+ options:
+ max-size: "30m"
+ max-file: "5"
+
+ datarouter:
+ image: ${DOCKER_REGISTRY}/openecomp/datarouter-service
+ hostname: datarouter
+ volumes:
+ - ${DATA-ROUTER_LOGS}:/logs
+ - /opt/app/datarouter-service/appconfig:/opt/app/data-router/config
+ - /opt/app/datarouter-service/dynamic:/opt/app/data-router/dynamic
+ ports:
+ - 9502:9502
+ environment:
+ - CONFIG_HOME=/opt/app/data-router/config/
+ - KEY_STORE_PASSWORD=OBF:1i9a1u2a1unz1lr61wn51wn11lss1unz1u301i6o
+ - KEY_MANAGER_PASSWORD=OBF:1y0q1uvc1uum1uvg1pil1pjl1uuq1uvk1uuu1y10
+ - DYNAMIC_ROUTES=/opt/app/data-router/dynamic/routes
+ - SERVICE_BEANS=/opt/app/data-router/dynamic/conf
+ logging:
+ driver: "json-file"
+ options:
+ max-size: "30m"
+ max-file: "5"
+
+ model-loader:
+ image: ${DOCKER_REGISTRY}/openecomp/model-loader
+ hostname: model-loader
+ volumes:
+ - ${MODEL-LOADER_LOGS}:/logs
+ - /opt/app/model-loader/appconfig:/opt/app/model-loader/config
+ environment:
+ - CONFIG_HOME=/opt/app/model-loader/config/
+ logging:
+ driver: "json-file"
+ options:
+ max-size: "30m"
+ max-file: "5"
+
networks:
- default:
+ default:
driver: bridge
driver_opts:
com.docker.network.driver.mtu: ${MTU}
diff --git a/docker-compose-db.yml b/docker-compose-db.yml
index 7f55858..da29fdd 100644
--- a/docker-compose-db.yml
+++ b/docker-compose-db.yml
@@ -24,8 +24,27 @@ services:
options:
max-size: "30m"
max-file: "5"
+
+ aai.elasticsearch.simpledemo.openecomp.org:
+ image: elasticsearch:2.4.1
+ hostname: aai.elasticsearch.simpledemo.openecomp.org
+ container_name: elasticsearch
+ ports:
+ - "9200:9200"
+ volumes:
+ - /opt/app/elasticsearch/config/elasticsearch.yml:/usr/share/elasticsearch/config/elasticsearch.yml
+ - es-data:/usr/share/elasticsearch/data
+ logging:
+ driver: "json-file"
+ options:
+ max-size: "30m"
+ max-file: "5"
+
networks:
default:
driver: bridge
driver_opts:
com.docker.network.driver.mtu: ${MTU}
+
+volumes:
+ es-data:
diff --git a/elasticsearch/config/elasticsearch.yml b/elasticsearch/config/elasticsearch.yml
new file mode 100644
index 0000000..21e29df
--- /dev/null
+++ b/elasticsearch/config/elasticsearch.yml
@@ -0,0 +1,400 @@
+##################### Elasticsearch Configuration Example #####################
+
+# This file contains an overview of various configuration settings,
+# targeted at operations staff. Application developers should
+# consult the guide at <http://elasticsearch.org/guide>.
+#
+# The installation procedure is covered at
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup.html>.
+#
+# Elasticsearch comes with reasonable defaults for most settings,
+# so you can try it out without bothering with configuration.
+#
+# Most of the time, these defaults are just fine for running a production
+# cluster. If you're fine-tuning your cluster, or wondering about the
+# effect of certain configuration option, please _do ask_ on the
+# mailing list or IRC channel [http://elasticsearch.org/community].
+
+# Any element in the configuration can be replaced with environment variables
+# by placing them in ${...} notation. For example:
+#
+# node.rack: ${RACK_ENV_VAR}
+
+# For information on supported formats and syntax for the config file, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup-configuration.html>
+################################### Cluster ###################################
+
+# Cluster name identifies your cluster for auto-discovery. If you're running
+# multiple clusters on the same network, make sure you're using unique names.
+#
+# cluster.name: elasticsearch
+
+cluster.name: ES_AAI
+
+#################################### Node #####################################
+
+node.name: ES_ONAP
+node.master: true
+node.data: true
+
+
+# Use the Cluster Health API [http://localhost:9200/_cluster/health], the
+# Node Info API [http://localhost:9200/_nodes] or GUI tools
+# such as <http://www.elasticsearch.org/overview/marvel/>,
+# <http://github.com/karmi/elasticsearch-paramedic>,
+# <http://github.com/lukas-vlcek/bigdesk> and
+# <http://mobz.github.com/elasticsearch-head> to inspect the cluster state.
+
+# By default, multiple nodes are allowed to start from the same installation location
+# to disable it, set the following:
+
+node.max_local_storage_nodes: 1
+
+
+#################################### Index ####################################
+# You can set a number of options (such as shard/replica options, mapping
+# or analyzer definitions, translog settings, ...) for indices globally,
+# in this file.
+#
+# Note, that it makes more sense to configure index settings specifically for
+# a certain index, either when creating it or by using the index templates API.
+#
+# See <http://elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules.html> and
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/indices-create-index.html>
+# for more information.
+
+# Set the number of shards (splits) of an index (5 by default):
+
+index.number_of_shards: 5
+
+# Set the number of replicas (additional copies) of an index (1 by default):
+
+index.number_of_replicas: 1
+
+# These settings directly affect the performance of index and search operations
+# in your cluster. Assuming you have enough machines to hold shards and
+# replicas, the rule of thumb is:
+#
+# 1. Having more *shards* enhances the _indexing_ performance and allows to
+# _distribute_ a big index across machines.
+# 2. Having more *replicas* enhances the _search_ performance and improves the
+# cluster _availability_.
+#
+# The "number_of_shards" is a one-time setting for an index.
+#
+# The "number_of_replicas" can be increased or decreased anytime,
+# by using the Index Update Settings API.
+#
+# Elasticsearch takes care about load balancing, relocating, gathering the
+# results from nodes, etc. Experiment with different settings to fine-tune
+# your setup.
+
+# Use the Index Status API (<http://localhost:9200/A/_status>) to inspect
+# the index status.
+
+
+#################################### Paths ####################################
+
+# Path to directory containing configuration (this file and logging.yml):
+#path.conf: /opt/app/elasticsearch/config
+
+# Path to directory where to store index data allocated for this node.
+# Use swm auto link to redirect the data directory if necessary.
+
+#path.data: /opt/app/elasticsearch/data
+
+# path.data: /path/to/data1,/path/to/data2
+
+# path.work: /path/to/work
+
+#path.logs: /opt/app/elasticsearch/logs
+
+#path.plugins: /opt/app/elasticsearch/plugins
+
+
+#################################### Plugin ###################################
+
+# If a plugin listed here is not installed for current node, the node will not start.
+#
+# plugin.mandatory: mapper-attachments,lang-groovy
+
+
+################################### Memory ####################################
+
+# Elasticsearch performs poorly when JVM starts swapping: you should ensure that
+# it _never_ swaps.
+#
+# Set this property to true to lock the memory: default is true
+
+bootstrap.mlockall: true
+
+# Make sure that the ES_MIN_MEM and ES_MAX_MEM environment variables are set
+# to the same value, and that the machine has enough memory to allocate
+# for Elasticsearch, leaving enough memory for the operating system itself.
+#
+# You should also make sure that the Elasticsearch process is allowed to lock
+# the memory, eg. by using `ulimit -l unlimited`.
+
+
+############################## Network And HTTP ###############################
+# Elasticsearch, by default, binds itself to the 0.0.0.0 address, and listens
+# on port [9200-9300] for HTTP traffic and on port [9300-9400] for node-to-node
+# communication. (the range means that if the port is busy, it will automatically
+# try the next port).
+
+# Set the bind address specifically (IPv4 or IPv6):
+network.bind_host: 0.0.0.0
+
+# Set the address other nodes will use to communicate with this node. If not
+# set, it is automatically derived. It must point to an actual IP address.
+
+# network.publish_host: 0.0.0.0
+
+# Set both 'bind_host' and 'publish_host':
+# network.host: 192.168.0.1
+
+
+# Set a custom port for the node to node communication (9300 by default):
+transport.tcp.port: 8443
+
+# Enable compression for all communication between nodes (disabled by default):
+transport.tcp.compress: false
+
+# Set a custom port to listen for HTTP traffic:
+# http.port: 9200
+http.port: 9200
+
+# Set a custom allowed content length:
+# http.max_content_length: 100mb
+http.max_content_length: 100mb
+
+# Disable HTTP completely:
+# http.enabled: false
+http.enabled: true
+
+# This is specifically useful for permitting which front end Kibana Url's are permitted to access elastic search.
+http.cors.enabled: false
+http.cors.allow-origin: "/.*/"
+http.cors.allow-headers: X-Requested-With, Content-Type, Content-Length
+http.cors.allow-credentials: false
+################################### Gateway ###################################
+
+# The gateway allows for persisting the cluster state between full cluster
+# restarts. Every change to the state (such as adding an index) will be stored
+# in the gateway, and when the cluster starts up for the first time,
+# it will read its state from the gateway.
+# There are several types of gateway implementations. For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-gateway.html>.
+
+# The default gateway type is the "local" gateway (recommended):
+#
+#gateway.type: local
+#gateway.type: local
+
+# Settings below control how and when to start the initial recovery process on
+# a full cluster restart (to reuse as much local data as possible when using shared
+# gateway).
+
+# Allow recovery process after N nodes in a cluster are up:
+#
+# gateway.recover_after_nodes: 1
+gateway.recover_after_nodes: 1
+
+# Set the timeout to initiate the recovery process, once the N nodes
+# from previous setting are up (accepts time value):
+#
+#gateway.recover_after_time: 5m
+gateway.recover_after_time: 5m
+
+# Set how many nodes are expected in this cluster. Once these N nodes
+# are up (and recover_after_nodes is met), begin recovery process immediately
+# (without waiting for recover_after_time to expire):
+#
+# gateway.expected_nodes: 2
+gateway.expected_nodes: 2
+
+############################# Recovery Throttling #############################
+
+# These settings allow to control the process of shards allocation between
+# nodes during initial recovery, replica allocation, rebalancing,
+# or when adding and removing nodes.
+
+# Set the number of concurrent recoveries happening on a node:
+#
+# 1. During the initial recovery
+#
+# cluster.routing.allocation.node_initial_primaries_recoveries: 4
+#
+# 2. During adding/removing nodes, rebalancing, etc
+#
+# cluster.routing.allocation.node_concurrent_recoveries: 2
+
+# Set to throttle throughput when recovering (eg. 100mb, by default 20mb):
+# indices.recovery.max_bytes_per_sec: 20mb
+indices.recovery.max_bytes_per_sec: 20mb
+
+# Set to limit the number of open concurrent streams when
+# recovering a shard from a peer:
+#
+# indices.recovery.concurrent_streams: 5
+indices.recovery.concurrent_streams: 5
+
+################################## Discovery ##################################
+
+# Discovery infrastructure ensures nodes can be found within a cluster
+# and master node is elected. Multicast discovery is the default.
+
+# Set to ensure a node sees N other master eligible nodes to be considered
+# operational within the cluster. Its recommended to set it to a higher value
+# than 1 when running more than 2 nodes in the cluster.
+#
+discovery.zen.minimum_master_nodes: 1
+
+# Set the time to wait for ping responses from other nodes when discovering.
+# Set this option to a higher value on a slow or congested network
+# to minimize discovery failures:
+#
+# discovery.zen.ping.timeout: 3s
+discovery.zen.ping.timeout:
+
+# For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-zen.html>
+
+# Unicast discovery allows to explicitly control which nodes will be used
+# to discover the cluster. It can be used when multicast is not present,
+# or to restrict the cluster communication-wise.
+#
+# 1. Disable multicast discovery (enabled by default):
+# discovery.zen.ping.multicast.enabled: false
+discovery.zen.ping.multicast.enabled: false
+
+
+# 2. Configure an initial list of master nodes in the cluster
+# to perform discovery when new nodes (master or data) are started:
+#
+# discovery.zen.ping.unicast.hosts: ["host1", "host2:port"]
+discovery.zen.ping.unicast.hosts: ["0.0.0.0"]
+
+# EC2 discovery allows to use AWS EC2 API in order to perform discovery.
+#
+# You have to install the cloud-aws plugin for enabling the EC2 discovery.
+#
+# For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-ec2.html>
+#
+#
+# See <http://elasticsearch.org/tutorials/elasticsearch-on-ec2/>
+# for a step-by-step tutorial.
+
+# GCE discovery allows to use Google Compute Engine API in order to perform discovery.
+#
+# You have to install the cloud-gce plugin for enabling the GCE discovery.
+#
+# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-gce>.
+
+# Azure discovery allows to use Azure API in order to perform discovery.
+#
+# You have to install the cloud-azure plugin for enabling the Azure discovery.
+#
+# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-azure>.
+
+################################## Slow Log ##################################
+
+# Shard level query and fetch threshold logging.
+
+#index.search.slowlog.threshold.query.warn: 10s
+#index.search.slowlog.threshold.query.info: 5s
+#index.search.slowlog.threshold.query.debug: 2s
+#index.search.slowlog.threshold.query.trace: 500ms
+
+#index.search.slowlog.threshold.fetch.warn: 1s
+#index.search.slowlog.threshold.fetch.info: 800ms
+#index.search.slowlog.threshold.fetch.debug: 500ms
+#index.search.slowlog.threshold.fetch.trace: 200ms
+
+#index.indexing.slowlog.threshold.index.warn: 10s
+#index.indexing.slowlog.threshold.index.info: 5s
+#index.indexing.slowlog.threshold.index.debug: 2s
+#index.indexing.slowlog.threshold.index.trace: 500ms
+
+################################## GC Logging ################################
+
+#monitor.jvm.gc.young.warn: 1000ms
+#monitor.jvm.gc.young.info: 700ms
+#monitor.jvm.gc.young.debug: 400ms
+
+#monitor.jvm.gc.old.warn: 10s
+#monitor.jvm.gc.old.info: 5s
+#monitor.jvm.gc.old.debug: 2s
+
+#############################################################################################
+### SEARCH GUARD SSL #
+### Configuration #
+###############################################################################################
+## Uncomment all lines below prefixed with #X# (globally remove #X#) for searchguard
+##
+###############################################################################################
+### Transport layer SSL #
+### #
+###############################################################################################
+### Enable or disable node-to-node ssl encryption (default: true)
+#X#searchguard.ssl.transport.enable_openssl_if_available: true
+#X#searchguard.ssl.transport.enabled: true
+### JKS or PKCS12 (default: JKS)
+#X#searchguard.ssl.transport.keystore_type: JKS
+### Relative path to the keystore file (mandatory, this stores the server certificates), must be placed under the config/ dir
+#X#searchguard.ssl.transport.keystore_filepath: /some/path
+### Alias name (default: first alias which could be found)
+###searchguard.ssl.transport.keystore_alias: localhost
+### Keystore password (default: changeit)
+#X#searchguard.ssl.transport.keystore_password: changeit
+##
+### JKS or PKCS12 (default: JKS)
+#X#searchguard.ssl.transport.truststore_type: JKS
+### Relative path to the truststore file (mandatory, this stores the client/root certificates), must be placed under the config/ dir
+#X#searchguard.ssl.transport.truststore_filepath: truststore.jks
+### Alias name (default: first alias which could be found)
+###searchguard.ssl.transport.truststore_alias: my_alias
+### Truststore password (default: changeit)
+#X#searchguard.ssl.transport.truststore_password: changeit
+### Enforce hostname verification (default: true)
+###searchguard.ssl.transport.enforce_hostname_verification: true
+### If hostname verification specify if hostname should be resolved (default: true)
+###searchguard.ssl.transport.resolve_hostname: true
+### Use native Open SSL instead of JDK SSL if available (default: true)
+###searchguard.ssl.transport.enable_openssl_if_available: false
+##
+###############################################################################################
+### HTTP/REST layer SSL #
+### #
+###############################################################################################
+### Enable or disable rest layer security - https, (default: false)
+#X#searchguard.ssl.http.enable_openssl_if_available: true
+#X#searchguard.ssl.http.enabled: true
+### JKS or PKCS12 (default: JKS)
+#X#searchguard.ssl.http.keystore_type: JKS
+### Relative path to the keystore file (this stores the server certificates), must be placed under the config/ dir
+#X#searchguard.ssl.http.keystore_filepath: /keystore/path
+### Alias name (default: first alias which could be found)
+###searchguard.ssl.http.keystore_alias: my_alias
+### Keystore password (default: changeit)
+#X#searchguard.ssl.http.keystore_password: changeit
+### Do the clients (typically the browser or the proxy) have to authenticate themself to the http server, default is OPTIONAL
+### To enforce authentication use REQUIRE, to completely disable client certificates use NONE
+###searchguard.ssl.http.clientauth_mode: REQUIRE
+### JKS or PKCS12 (default: JKS)
+#X#searchguard.ssl.http.truststore_type: JKS
+### Relative path to the truststore file (this stores the client certificates), must be placed under the config/ dir
+#X#searchguard.ssl.http.truststore_filepath: truststore.jks
+### Alias name (default: first alias which could be found)
+###searchguard.ssl.http.truststore_alias: my_alias
+### Truststore password (default: changeit)
+#X#searchguard.ssl.http.truststore_password: changeit
+### Use native Open SSL instead of JDK SSL if available (default: true)
+###searchguard.ssl.http.enable_openssl_if_available: false
+
+#####################################################
+##### Security manager - Searchguard Configuration
+#####################################################
+#X#security.manager.enabled: false
+#X#searchguard.authcz.admin_dn:
diff --git a/search-data-service/appconfig/elastic-search.properties b/search-data-service/appconfig/elastic-search.properties
index 7b442b0..341418d 100755
--- a/search-data-service/appconfig/elastic-search.properties
+++ b/search-data-service/appconfig/elastic-search.properties
@@ -1,5 +1,5 @@
# ElasticSearch Configuration
-es.cluster-name=
+es.cluster-name=ES_AAI
es.ip-address=
es.http-port=9200