Add all of the resources repo

Change-Id: If2a9c584621f6d01eb70e9c51e05e054ef3486c4
Signed-off-by: Venkata Harish K Kajur <vk250x@att.com>

1 files changed, 138 insertions, 0 deletions

diff --git a/aai-resources/bundleconfig-local/etc/sysprops/sys-props.properties b/aai-resources/bundleconfig-local/etc/sysprops/sys-props.properties
new file mode 100644
index 0000000..8ae26b7
--- /dev/null
+++ b/aai-resources/bundleconfig-local/etc/sysprops/sys-props.properties
@@ -0,0 +1,138 @@
+#This file is used for defining AJSC system properties for different configuration schemes and is necessary for the AJSC to run properly.
+#The sys-props.properties file is used for running locally. The template.sys-props.properties file will be used when deployed
+#to a SOA/CSI Cloud node. 
+
+#AJSC System Properties. The following properties are required for ALL AJSC services. If you are adding System Properties for your
+#particular service, please add them AFTER all AJSC related System Properties. 
+
+#For Cadi Authorization, use value="authentication-scheme-1
+CadiAuthN=authentication-scheme-1
+
+#For Basic Authorization, use value="authentication-scheme-1
+authN=authentication-scheme-2
+
+#Persistence used for AJSC meta-data storage. For most environments, "file" should be used.
+ajscPersistence=file
+
+# If using hawtio for local development, these properties will allow for faster server startup and usage for local development
+hawtio.authenticationEnabled=false
+hawtio.config.pullOnStartup=false
+
+#Removes the extraneous restlet console output
+org.restlet.engine.loggerFacadeClass=org.restlet.ext.slf4j.Slf4jLoggerFacade
+
+#server.host property to be enabled for local DME2 related testing
+#server.host=<Your network IP address> 
+
+#Enable/disable SSL (values=true/false). This property also determines which protocol to use (https if true, http otherwise), to register services into GRM through DME2.
+enableSSL=false
+
+#Enable/disable csi logging (values=true/false). This can be disabled during local development
+csiEnable=false
+
+#Enable/disable EJB Container
+ENABLE_EJB=false
+
+#Enable/disable OSGI
+isOSGIEnable=false
+
+#Configure JMS Queue (WMQ/TIBCO)
+JMS_BROKER=WMQ
+
+#JMS properties needed for CSI Logging
+JMS_TIBCO_PROVIDER_URL=ONAPserverTBD
+JMS_LOGGER_USER_NAME=spm2
+JMS_LOGGER_PASSWORD=its4test
+JMS_LOGGER_AUDIT_QUEUE_BINDING=pub.m2e.audit.logger.queue
+JMS_LOGGER_PERF_QUEUE_BINDING=log.csi.performance02
+
+#WMQ connectivity
+JMS_WMQ_PROVIDER_URL=aftdsc://AFTUAT/34.07/-84.28
+JMS_WMQ_CONNECTION_FACTORY_NAME=aftdsc://AFTUAT/?service=CSILOG,version=1.0,bindingType=fusionBus,envContext=Q,Q25A=YES
+JMS_WMQ_INITIAL_CONNECTION_FACTORY_NAME=com.att.aft.jms.FusionCtxFactory
+JMS_WMQ_AUDIT_DESTINATION_NAME=queue:///CSILOGQL.M2E.DASHBOARD01.NOT.Q25A
+JMS_WMQ_PERF_DESTINATION_NAME=queue:///CSILOGQL.M2E.PERFORMANCE01.NOT.Q25A
+
+server.port=8087
+
+#CSI related variables for CSM framework
+csm.hostname=d1a-m2e-q112m2e1.edc.cingular.net
+
+#Enable/disable endpoint level logging (values=true/false). This can be disabled during local development
+endpointLogging=false
+
+#SOA_CLOUD_ENV is used to register your service with dme2 and can be turned off for local development (values=true/false).
+SOA_CLOUD_ENV=false
+
+#CONTINUE_ON_LISTENER_EXCEPTION will exit the application if there is a DME2 exception at the time of registration.
+CONTINUE_ON_LISTENER_EXCEPTION=false
+
+#Jetty Container ThreadCount Configuration Variables
+AJSC_JETTY_ThreadCount_MIN=10
+AJSC_JETTY_ThreadCount_MAX=500
+AJSC_JETTY_IDLETIME_MAX=60000
+AJSC_JETTY_BLOCKING_QUEUE_SIZE=100
+
+#Camel Context level default threadPool Profile configuration
+CAMEL_POOL_SIZE=10
+CAMEL_MAX_POOL_SIZE=20
+CAMEL_KEEP_ALIVE_TIME=60
+CAMEL_MAX_QUEUE_SIZE=1000
+
+#File Monitor configurations
+ssf_filemonitor_polling_interval=5
+ssf_filemonitor_threadpool_size=10
+
+#GRM/DME2 System Properties
+AFT_DME2_CONN_IDLE_TIMEOUTMS=5000
+AJSC_ENV=SOACLOUD
+
+SOACLOUD_NAMESPACE=com.att.ajsc
+SOACLOUD_ENV_CONTEXT=DEV
+SOACLOUD_PROTOCOL=https
+SOACLOUD_ROUTE_OFFER=DEFAULT
+
+AFT_LATITUDE=23.4
+AFT_LONGITUDE=33.6
+AFT_ENVIRONMENT=AFTUAT
+
+#Restlet Component Default Properties
+RESTLET_COMPONENT_CONTROLLER_DAEMON=true
+RESTLET_COMPONENT_CONTROLLER_SLEEP_TIME_MS=100
+RESTLET_COMPONENT_INBOUND_BUFFER_SIZE=8192
+RESTLET_COMPONENT_MIN_THREADS=1
+RESTLET_COMPONENT_MAX_THREADS=10
+RESTLET_COMPONENT_LOW_THREADS=8
+RESTLET_COMPONENT_MAX_QUEUED=0
+RESTLET_COMPONENT_MAX_CONNECTIONS_PER_HOST=-1
+RESTLET_COMPONENT_MAX_TOTAL_CONNECTIONS=-1
+RESTLET_COMPONENT_OUTBOUND_BUFFER_SIZE=8192
+RESTLET_COMPONENT_PERSISTING_CONNECTIONS=true
+RESTLET_COMPONENT_PIPELINING_CONNECTIONS=false
+RESTLET_COMPONENT_THREAD_MAX_IDLE_TIME_MS=60000
+RESTLET_COMPONENT_USE_FORWARDED_HEADER=false
+RESTLET_COMPONENT_REUSE_ADDRESS=true
+
+#Externalized jar and properties file location. In CSI environments, there are a few libs that have been externalized to aid
+#in CSTEM maintenance of the versions of these libs. The most important to the AJSC is the DME2 lib. Not only is this lib necessary
+#for proper registration of your AJSC service on a node, but it is also necessary for running locally as well. Another framework
+#used in CSI envs is the CSM framework. These 2 framework libs are shown as "provided" dependencies within the pom.xml. These
+#dependencies will be copied into the target/commonLibs folder with the normal "mvn clean package" goal of the AJSC. They will
+#then be added to the classpath via AJSC_EXTERNAL_LIB_FOLDERS system property. Any files (mainly property files) that need
+#to be on the classpath should be added to the AJSC_EXTERNAL_PROPERTIES_FOLDERS system property. The default scenario when 
+#testing your AJSC service locally will utilize the target/commonLibs directory for DME2 and CSM related artifacts and 2 
+#default csm properties files will be used for local testing with anything CSM knorelated.
+#NOTE: we are using maven-replacer-plugin to replace "(doubleUnderscore)basedir(doubleUnderscore)" with ${basedir} within the 
+#target directory for running locally. Multiple folder locations can be separated by the pipe ("|") character.
+#Please, NOTE: for running locally, we are setting this system property in the antBuild/build.xml "runLocal" target and in the 
+#"runAjsc" profile within the pom.xml. This is to most effectively use maven variables (${basedir}, most specifically. Therefore,
+#when running locally, the following 2 properties should be set within the profile(s) themselves. 
+#Example: target/commonLibs|target/otherLibs
+#AJSC_EXTERNAL_LIB_FOLDERS=__basedir__/target/commonLibs
+#AJSC_EXTERNAL_PROPERTIES_FOLDERS=__basedir__/ajsc-shared-config/etc
+#End of AJSC System Properties
+
+#Service System Properties. Please, place any Service related System Properties below.
+KEY_STORE_PASSWORD=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+KEY_MANAGER_PASSWORD=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+AAI_CORE_VERSION=1.1.0-SNAPSHOT