Add all of the resources repo

Change-Id: If2a9c584621f6d01eb70e9c51e05e054ef3486c4
Signed-off-by: Venkata Harish K Kajur <vk250x@att.com>

1 files changed, 185 insertions, 0 deletions

diff --git a/aai-resources/ajsc-shared-config/etc/csm-config-app.properties b/aai-resources/ajsc-shared-config/etc/csm-config-app.properties
new file mode 100644
index 0000000..0aebe00
--- /dev/null
+++ b/aai-resources/ajsc-shared-config/etc/csm-config-app.properties
@@ -0,0 +1,185 @@
+Global.ExtendedProperty.AuthoritativeServers=${ChangeMe_csm.acfshost}:${ChangeMe_csm.acfsport}
+
+#Possible working server for troubleshooting csm related items (used when testing/using invokeService or invokeAdapter components)
+#Global.ExtendedProperty.AuthoritativeServers=ONAPserverTBD
+#
+# The settings in this file control the behavior of the CSM Framework. 
+# The majority of the settings in this file adhere to the following
+# pattern:
+# 
+#  [EntityType].[EntityId].[PropertyName]=[PropertyValue]
+# 
+# Where:
+# 
+#  [EntityType]    Identifies the type of entity (service or
+#                  service group) that's being configured.
+#  [EntityId]      Identifies the individual entity.
+#  [PropertyName]  Identifies the property that is being set.
+#  [PropertyValue] Is the actual property value.
+# 
+# In the formatting sample above, the EntityType can be setto one of the
+# following values:
+# 
+#  * 'Service' if an individual service is being configured.
+#  * 'Group 'if a service group is being configured.
+# 
+# The reference to 'entity' in the above description is intentionally
+# generic.  The CSM Framework supports the configuration of individual
+# services as well as groups of services.  The type of entity that is
+# actually being configured is determined by the value of the
+# [EntityType] portion of the property.
+# 
+# There are two values for [EntityId] that have a special meaning within
+# the CSM Framework:
+# 
+# 
+# DefaultService - Identifies the default configuration for any service
+#     that is not explicitly configured elsewhere in this file.
+# 
+# DefaultServiceGroup - This identifies the entity that provides the
+#     default configuration for any service group that is not explicitly
+#     configured elsewhere in this file.
+# 
+# DO NOT use either of these as the identifier for any of your
+# application-specific services or service groups.
+# 
+# The CSM Framework treats all entity identifiers in a case-insensitive
+# manner.  The entity ids 'Service1' and 'SERVICE1' are equivalant.  All
+# properties with the same [EntityId] will be applied to the same
+# configuration.  The CSM Framework framework also treats property names
+# in a case-insensitive manner.  'MaxRequestCount' and 'MAXREQUESTCOUNT'
+# are considered equivalent within the CSM framework.
+# 
+# The following properties are supported by the CSM Framework.  Any
+# properties that are entity-specific will include the '[EntityId].'
+# prefix.
+# 
+# [EntityType].[EntityId].Enabled - Indicates if the entity is enabled
+#     or disabled by default.  The value of this property must be either
+#     'true' or 'false'.
+# 
+# [EntityType].[EntityId].MaxRequestCount - The maximum number of
+#     requests that can be running at any point in time.  Once this limit is
+#     reached, the service is considered  to be 'flooded', and subsequent
+#     requests are refused until the request count drops to the level
+#     specified by the RestartThreshold property.  Once the restart
+#     threshold is reached, the service will be 'restarted' based on the
+#     values of the 'RestartFrequency' and 'RestartIncrement' properties.
+#     The value of this property must be a numeric value.
+#     The default value for this property is 20.
+# 
+# [EntityType].[EntityId].MaxStalledRequestCount - the maximum number of
+#     'stalled' requests that are allowed before subsequent requests are
+#     refused
+#     The value of this property must be a numeric value.
+#     The default value for this property is 10.
+# 
+# [EntityType].[EntityId].RestartThreshold - the process count level at
+#     which requests will be allowed to proceed whenever a service becomes
+#     'flooded'.  This property is only used if the total process count
+#     reaches the level set by the 'MaxRequestCount' property.  Once that
+#     occurs, subsequent requests will be refused until the active request
+#     count drops to the level specified by this property.  Once the active
+#     request count drops to the level specified by this property, the
+#     service will be 'restarted' based on the values of the
+#     'RestartFrequency' and 'RestartIncrement' properties.  To cause the
+#     CSM framework to allow subsequent requests to proceed as soon as the
+#     active request count drops below level level set by the
+#     'MaxRequestCount' property, just set this property to either -1 or 1
+#     less than the value of the 'MaxRequestCount' property.
+#     The value of this property must be a numeric value.
+#     The default value for this property is -1.
+# 
+# [EntityType].[EntityId].RestartIncrement - This property, along with
+#     the 'RestartFrequency' property helps determine how quickly the active
+#     request count will rise to the 'maximum request count' whenever a
+#     service is 'restarted' after becoming 'flooded'. The
+#     'RestartFrequency' property determines how frequenty the permissable
+#     number of active requests will be increased.  This property determines
+#     how much the permissible number of active requests will increase by
+#     whenever it is raised.  If this property is set to a positive value,
+#     then the 'RestartFrequency' property must also be set to a positive
+#     value.  If this property is set to 0, then the 'RestartFrequency'
+#     property must also be set to 0.  In other words, either both
+#     properties are 0 or both properties are greater than 0.  When both
+#     properties are set to 0, then the permissable number of active
+#     requests immediately rises back up to the maximum request count once
+#     it has droppedback down to the 'restart threshold'.  When both
+#     properties are greater than 0, then the permissable number of active
+#     requests gradually rises to the maximum request count.
+#     The value of this property must be a numeric value greater than or equal to 0.
+#     The default value for this property is 0.
+# 
+# [EntityType].[EntityId].RestartFrequency - This property, along with
+#     the 'RestartIncrement' property helps determine how quickly the active
+#     request count will rise to the 'maximum request count' whenever a
+#     service is 'restarted' after becoming 'flooded'. The
+#     'RestartIncrement' property determines how quickly the permissable
+#     number of active requests will be increased.  This property determines
+#     how frequently  that increase will occur.  If this property is set to
+#     a positive value, then the 'RestartIncrement' property must also be
+#     set to a positive value.  If this property is set to 0, then the
+#     'RestartIncrement' property must also be set to 0.  In other words,
+#     either both properties are 0 or both properties are greater than 0. 
+#     When both properties are set to 0, then the permissable number of
+#     active requests immediately rises back up to the maximum request count
+#     once it has droppedback down to the 'restart threshold'.  When both
+#     properties are greater than 0, then the permissable number of active
+#     requests gradually rises to the maximum request count.
+#     The value of this property must be a numeric value greater than or equal to 0.
+#     The default value for this property is 0.
+# 
+# [EntityType].[EntityId].ServiceGroupId - This property is only
+#     relevant for entities that are configured as services (i.e. the
+#     [EntityType] portion of the property is set to 'Service').  When the
+#     'ServiceGroupId' property is set to a non-blank value, the behavior of
+#     the service is controled by the configuration of the corresponding
+#     service group.  There is no default value for this property.
+# 
+# [EntityType].[EntityId].Timeout - the timeout, in milliseconds, for
+#     each process that is controlled by this configuration.  Once the
+#     duration of a process exceeds this value, the process will be
+#     considered to have entered a 'stalled' state.  The default value for
+#     this property is 10000.
+# 
+# FrameworkEnabled: - This is the one property that is not specific to a
+#     single entity.  This property determines whether the entire CSM
+#     Framework is enabled or disabled.  When disabled, the CSM Framework
+#     does not track any process counts.  All requests to access a service
+#     are allowed, regardless of the current level of activity.  The value
+#     of this property must be either 'true' or 'false'.
+# 
+
+#
+# Enables the CSM Framework so that it can manage interactions with external
+# services and/or resources.  To disable the CSM Framework, simply set
+# this property to false.
+#
+FrameworkEnabled=true
+
+#
+# These are the default settings for any service that is no explicitly configured
+# below.  A few things to note about this configuration:
+#  1) The "Enabled" property is not explicitly set.  Instead, we are relying
+#     on the default value of 'true'.
+#  2) The Timeout and Type properties are also not explicitly set.  Again, we
+#     are relying on the default values for these properties.
+#  
+Service.DefaultService.Enabled=true
+Service.DefaultService.MaxRequestCount=30
+Service.DefaultService.MaxStalledRequestCount=20
+Service.DefaultService.Timeout=30000
+Service.DefaultService.RestartThreshold=-1
+Service.DefaultService.AutoPurgeAfter=150000
+
+
+#
+# These are the default settings for any service group that is referenced in 
+# a service configuration but not configured below.
+# 
+# Currently CSI does not use any service group configurations!
+#
+#Group.DefaultGroup.MaxRequestCount=-1
+#Group.DefaultGroup.MaxStalledRequestCount=-1
+#Group.DefaultGroup.RestartThreshold=-1
+#Group.DefaultGroup.Timeout=-1