diff options
Diffstat (limited to 'charts/aai-elasticsearch/resources')
14 files changed, 0 insertions, 1235 deletions
diff --git a/charts/aai-elasticsearch/resources/bin/init_sg.sh b/charts/aai-elasticsearch/resources/bin/init_sg.sh deleted file mode 100644 index e859365..0000000 --- a/charts/aai-elasticsearch/resources/bin/init_sg.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh - -/usr/share/elasticsearch/plugins/search-guard-6/tools/sgadmin.sh \ - -cd /usr/share/elasticsearch/config/sg \ - -ks /usr/share/elasticsearch/config/sg/auth/{{ .Values.config.adminKeyStore }} \ - -ts /usr/share/elasticsearch/config/sg/auth/{{ .Values.config.trustStore }} \ - -kspass {{ .Values.config.adminKeyStorePassword }} \ - -tspass {{ .Values.config.trustStorePassword}} \ - -nhnv \ - -icl \ - -p {{ .Values.service.internalPort2 }}
\ No newline at end of file diff --git a/charts/aai-elasticsearch/resources/bin/run.sh b/charts/aai-elasticsearch/resources/bin/run.sh deleted file mode 100644 index a612c74..0000000 --- a/charts/aai-elasticsearch/resources/bin/run.sh +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh - -# Wait for ES to start then initialize SearchGuard -/usr/local/bin/docker-entrypoint.sh eswrapper & -/usr/share/elasticsearch/bin/wait_until_started.sh -/usr/share/elasticsearch/bin/init_sg.sh - -wait
\ No newline at end of file diff --git a/charts/aai-elasticsearch/resources/bin/wait_until_started.sh b/charts/aai-elasticsearch/resources/bin/wait_until_started.sh deleted file mode 100644 index 279253b..0000000 --- a/charts/aai-elasticsearch/resources/bin/wait_until_started.sh +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/sh -RET=1 - -while [[ RET -ne 0 ]]; do - echo "Waiting for Elasticsearch to become ready before running sgadmin..." - curl -XGET -k "https://localhost:{{ .Values.service.internalPort }}/" >/dev/null 2>&1 - RET=$? - sleep 5 -done
\ No newline at end of file diff --git a/charts/aai-elasticsearch/resources/config/elasticsearch.yml b/charts/aai-elasticsearch/resources/config/elasticsearch.yml deleted file mode 100644 index 87536e3..0000000 --- a/charts/aai-elasticsearch/resources/config/elasticsearch.yml +++ /dev/null @@ -1,397 +0,0 @@ -# Copyright © 2018 Amdocs, Bell Canada, AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - - -##################### Elasticsearch Configuration Example ##################### - -# This file contains an overview of various configuration settings, -# targeted at operations staff. Application developers should -# consult the guide at <http://elasticsearch.org/guide>. -# -# The installation procedure is covered at -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup.html>. -# -# Elasticsearch comes with reasonable defaults for most settings, -# so you can try it out without bothering with configuration. -# -# Most of the time, these defaults are just fine for running a production -# cluster. If you're fine-tuning your cluster, or wondering about the -# effect of certain configuration option, please _do ask_ on the -# mailing list or IRC channel [http://elasticsearch.org/community]. - -# Any element in the configuration can be replaced with environment variables -# by placing them in ${...} notation. For example: -# -# node.rack: ${RACK_ENV_VAR} - -# For information on supported formats and syntax for the config file, see -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup-configuration.html> -################################### Cluster ################################### - -# Cluster name identifies your cluster for auto-discovery. If you're running -# multiple clusters on the same network, make sure you're using unique names. -# -# cluster.name: elasticsearch - -cluster.name: ES_AAI - -#################################### Node ##################################### - -node.name: ES_ONAP -node.master: true -node.data: true - - -# Use the Cluster Health API [http://localhost:9200/_cluster/health], the -# Node Info API [http://localhost:9200/_nodes] or GUI tools -# such as <http://www.elasticsearch.org/overview/marvel/>, -# <http://github.com/karmi/elasticsearch-paramedic>, -# <http://github.com/lukas-vlcek/bigdesk> and -# <http://mobz.github.com/elasticsearch-head> to inspect the cluster state. - -# By default, multiple nodes are allowed to start from the same installation location -# to disable it, set the following: - -node.max_local_storage_nodes: 1 - - -#################################### Index #################################### -# You can set a number of options (such as shard/replica options, mapping -# or analyzer definitions, translog settings, ...) for indices globally, -# in this file. -# -# Note, that it makes more sense to configure index settings specifically for -# a certain index, either when creating it or by using the index templates API. -# -# See <http://elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules.html> and -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/indices-create-index.html> -# for more information. - -# Set the number of shards (splits) of an index (5 by default): - -#index.number_of_shards: 5 - -# Set the number of replicas (additional copies) of an index (1 by default): - -#index.number_of_replicas: 1 - -# These settings directly affect the performance of index and search operations -# in your cluster. Assuming you have enough machines to hold shards and -# replicas, the rule of thumb is: -# -# 1. Having more *shards* enhances the _indexing_ performance and allows to -# _distribute_ a big index across machines. -# 2. Having more *replicas* enhances the _search_ performance and improves the -# cluster _availability_. -# -# The "number_of_shards" is a one-time setting for an index. -# -# The "number_of_replicas" can be increased or decreased anytime, -# by using the Index Update Settings API. -# -# Elasticsearch takes care about load balancing, relocating, gathering the -# results from nodes, etc. Experiment with different settings to fine-tune -# your setup. - -# Use the Index Status API (<http://localhost:9200/A/_status>) to inspect -# the index status. - - -#################################### Paths #################################### - -# Path to directory containing configuration (this file and logging.yml): -#path.conf: /opt/app/elasticsearch/config - -# Path to directory where to store index data allocated for this node. -# Use swm auto link to redirect the data directory if necessary. - -path.data: /usr/share/elasticsearch/data - -# path.data: /path/to/data1,/path/to/data2 - -# path.work: /path/to/work - -path.logs: /usr/share/elasticsearch/logs - -#path.plugins: /opt/app/elasticsearch/plugins - - -#################################### Plugin ################################### - -# If a plugin listed here is not installed for current node, the node will not start. -# -# plugin.mandatory: mapper-attachments,lang-groovy - - -################################### Memory #################################### - -# Elasticsearch performs poorly when JVM starts swapping: you should ensure that -# it _never_ swaps. -# -# Set this property to true to lock the memory: default is true - -#bootstrap.memory_lock: true - -# Make sure that the ES_MIN_MEM and ES_MAX_MEM environment variables are set -# to the same value, and that the machine has enough memory to allocate -# for Elasticsearch, leaving enough memory for the operating system itself. -# -# You should also make sure that the Elasticsearch process is allowed to lock -# the memory, eg. by using `ulimit -l unlimited`. - -### Kernel Settings - -# Elasticsearch installs system call filters of various flavors depending on the -# operating system (e.g., seccomp on Linux). These system call filters are -# installed to prevent the ability to execute system calls related to forking -# as a defense mechanism against arbitrary code execution attacks on -# Elasticsearch The system call filter check ensures that if system call -# filters are enabled, then they were successfully installed. To pass the system -# call filter check you must either fix any configuration errors on your system -# that prevented system call filters from installing (check your logs), or at -# your own risk disable system call filters by setting -# bootstrap.system_call_filter to false. -# See: https://www.elastic.co/guide/en/elasticsearch/reference/current/system-call-filter-check.html -# -# seccomp is found in Linux kernels: 2.6.37–2.6.39, 3.0–3.19, 4.0–4.9, -# 4.10-rc+HEAD -# -# The default setting is to disable the filters assuming an older kernel -# version where seccomp is not available. -# See: https://discuss.elastic.co/t/elasticsearch-warn-unable-to-install-syscall-filter/42819 - -bootstrap.system_call_filter: false - -############################## Network And HTTP ############################### -# Elasticsearch, by default, binds itself to the 0.0.0.0 address, and listens -# on port [9200-9300] for HTTP traffic and on port [9300-9400] for node-to-node -# communication. (the range means that if the port is busy, it will automatically -# try the next port). - -# Set the bind address specifically (IPv4 or IPv6): -network.bind_host: 0.0.0.0 - -# Set the address other nodes will use to communicate with this node. If not -# set, it is automatically derived. It must point to an actual IP address. - -# network.publish_host: 0.0.0.0 - -# Set both 'bind_host' and 'publish_host': -# network.host: 192.168.0.1 - - -# Set a custom port for the node to node communication (9300 by default): -transport.tcp.port: {{ .Values.service.internalPort2 }} - -# Enable compression for all communication between nodes (disabled by default): -transport.tcp.compress: false - -# Set a custom port to listen for HTTP traffic: -# http.port: 9200 -http.port: {{ .Values.service.internalPort }} - -# Set a custom allowed content length: -# http.max_content_length: 100mb -http.max_content_length: 100mb - -# Disable HTTP completely: -# http.enabled: false -http.enabled: true - -# This is specifically useful for permitting which front end Kibana Url's are permitted to access elastic search. -http.cors.enabled: false -http.cors.allow-origin: "/.*/" -http.cors.allow-headers: X-Requested-With, Content-Type, Content-Length -http.cors.allow-credentials: false -################################### Gateway ################################### - -# The gateway allows for persisting the cluster state between full cluster -# restarts. Every change to the state (such as adding an index) will be stored -# in the gateway, and when the cluster starts up for the first time, -# it will read its state from the gateway. -# There are several types of gateway implementations. For more information, see -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-gateway.html>. - -# The default gateway type is the "local" gateway (recommended): -# -#gateway.type: local -#gateway.type: local - -# Settings below control how and when to start the initial recovery process on -# a full cluster restart (to reuse as much local data as possible when using shared -# gateway). - -# Allow recovery process after N nodes in a cluster are up: -# -# gateway.recover_after_nodes: 1 -gateway.recover_after_nodes: 1 - -# Set the timeout to initiate the recovery process, once the N nodes -# from previous setting are up (accepts time value): -# -#gateway.recover_after_time: 5m -gateway.recover_after_time: 5m - -# Set how many nodes are expected in this cluster. Once these N nodes -# are up (and recover_after_nodes is met), begin recovery process immediately -# (without waiting for recover_after_time to expire): -# -# gateway.expected_nodes: 2 -gateway.expected_nodes: 2 - -############################# Recovery Throttling ############################# - -# These settings allow to control the process of shards allocation between -# nodes during initial recovery, replica allocation, rebalancing, -# or when adding and removing nodes. - -# Set the number of concurrent recoveries happening on a node: -# -# 1. During the initial recovery -# -# cluster.routing.allocation.node_initial_primaries_recoveries: 4 -# -# 2. During adding/removing nodes, rebalancing, etc -# -# cluster.routing.allocation.node_concurrent_recoveries: 2 - -# Set to throttle throughput when recovering (eg. 100mb, by default 20mb): -# indices.recovery.max_bytes_per_sec: 20mb -indices.recovery.max_bytes_per_sec: 20mb - -# Set to limit the number of open concurrent streams when -# recovering a shard from a peer: -# -# indices.recovery.concurrent_streams: 5 -#indices.recovery.concurrent_streams: 5 - -################################## Discovery ################################## - -# Discovery infrastructure ensures nodes can be found within a cluster -# and master node is elected. Multicast discovery is the default. - -# Set to ensure a node sees N other master eligible nodes to be considered -# operational within the cluster. Its recommended to set it to a higher value -# than 1 when running more than 2 nodes in the cluster. -# -discovery.zen.minimum_master_nodes: 1 - -# Set the time to wait for ping responses from other nodes when discovering. -# Set this option to a higher value on a slow or congested network -# to minimize discovery failures: -# -# discovery.zen.ping_timeout: 3s -discovery.zen.ping_timeout: 3s - -# For more information, see -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-zen.html> - -# Unicast discovery allows to explicitly control which nodes will be used -# to discover the cluster. It can be used when multicast is not present, -# or to restrict the cluster communication-wise. -# -# 1. Disable multicast discovery (enabled by default): -# discovery.zen.ping.multicast.enabled: false -#discovery.zen.ping.multicast.enabled: false - - -# 2. Configure an initial list of master nodes in the cluster -# to perform discovery when new nodes (master or data) are started: -# -# discovery.zen.ping.unicast.hosts: ["host1", "host2:port"] -discovery.zen.ping.unicast.hosts: ["0.0.0.0"] - -# EC2 discovery allows to use AWS EC2 API in order to perform discovery. -# -# You have to install the cloud-aws plugin for enabling the EC2 discovery. -# -# For more information, see -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-ec2.html> -# -# -# See <http://elasticsearch.org/tutorials/elasticsearch-on-ec2/> -# for a step-by-step tutorial. - -# GCE discovery allows to use Google Compute Engine API in order to perform discovery. -# -# You have to install the cloud-gce plugin for enabling the GCE discovery. -# -# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-gce>. - -# Azure discovery allows to use Azure API in order to perform discovery. -# -# You have to install the cloud-azure plugin for enabling the Azure discovery. -# -# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-azure>. - -################################## Slow Log ################################## - -# Shard level query and fetch threshold logging. - -#index.search.slowlog.threshold.query.warn: 10s -#index.search.slowlog.threshold.query.info: 5s -#index.search.slowlog.threshold.query.debug: 2s -#index.search.slowlog.threshold.query.trace: 500ms - -#index.search.slowlog.threshold.fetch.warn: 1s -#index.search.slowlog.threshold.fetch.info: 800ms -#index.search.slowlog.threshold.fetch.debug: 500ms -#index.search.slowlog.threshold.fetch.trace: 200ms - -#index.indexing.slowlog.threshold.index.warn: 10s -#index.indexing.slowlog.threshold.index.info: 5s -#index.indexing.slowlog.threshold.index.debug: 2s -#index.indexing.slowlog.threshold.index.trace: 500ms - -################################## GC Logging ################################ - -#monitor.jvm.gc.young.warn: 1000ms -#monitor.jvm.gc.young.info: 700ms -#monitor.jvm.gc.young.debug: 400ms - -#monitor.jvm.gc.old.warn: 10s -#monitor.jvm.gc.old.info: 5s -#monitor.jvm.gc.old.debug: 2s - -############################################################################################# -### SEARCH GUARD SSL # -### Configuration # -############################################################################################### -######## Start Search Guard Demo Configuration ######## - -searchguard.enterprise_modules_enabled: false - -searchguard.ssl.transport.keystore_filepath: sg/auth/{{ .Values.config.nodeKeyStore }} -searchguard.ssl.transport.keystore_password: {{ .Values.config.nodeKeyStorePassword }} -searchguard.ssl.transport.truststore_filepath: sg/auth/{{ .Values.config.trustStore }} -searchguard.ssl.transport.truststore_password: {{ .Values.config.trustStorePassword }} -searchguard.ssl.transport.enforce_hostname_verification: false - -searchguard.ssl.http.enabled: true -searchguard.ssl.http.keystore_filepath: sg/auth/{{ .Values.config.nodeKeyStore }} -searchguard.ssl.http.keystore_password: {{ .Values.config.nodeKeyStorePassword }} -searchguard.ssl.http.truststore_filepath: sg/auth/{{ .Values.config.trustStore }} -searchguard.ssl.http.truststore_password: {{ .Values.config.trustStorePassword }} - -searchguard.nodes_dn: - - CN=esaai - -searchguard.authcz.admin_dn: - - CN=sgadmin - -# x-pack security conflicts with searchguard -xpack.security.enabled: false -xpack.ml.enabled: false -xpack.monitoring.enabled: false -xpack.watcher.enabled: false diff --git a/charts/aai-elasticsearch/resources/config/jvm.options b/charts/aai-elasticsearch/resources/config/jvm.options deleted file mode 100644 index e69d798..0000000 --- a/charts/aai-elasticsearch/resources/config/jvm.options +++ /dev/null @@ -1,117 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -## JVM configuration - -################################################################ -## IMPORTANT: JVM heap size -################################################################ -## -## You should always set the min and max JVM heap -## size to the same value. For example, to set -## the heap to 4 GB, set: -## -## -Xms4g -## -Xmx4g -## -## See https://www.elastic.co/guide/en/elasticsearch/reference/current/heap-size.html -## for more information -## -################################################################ - -# Xms represents the initial size of total heap space -# Xmx represents the maximum size of total heap space - --Xms1g --Xmx1g - -################################################################ -## Expert settings -################################################################ -## -## All settings below this section are considered -## expert settings. Don't tamper with them unless -## you understand what you are doing -## -################################################################ - -## GC configuration --XX:+UseConcMarkSweepGC --XX:CMSInitiatingOccupancyFraction=75 --XX:+UseCMSInitiatingOccupancyOnly - -## optimizations - -# pre-touch memory pages used by the JVM during initialization --XX:+AlwaysPreTouch - -## basic - -# force the server VM --server - -# explicitly set the stack size --Xss1m - -# set to headless, just in case --Djava.awt.headless=true - -# ensure UTF-8 encoding by default (e.g. filenames) --Dfile.encoding=UTF-8 - -# use our provided JNA always versus the system one --Djna.nosys=true - -# turn off a JDK optimization that throws away stack traces for common -# exceptions because stack traces are important for debugging --XX:-OmitStackTraceInFastThrow - -# flags to configure Netty --Dio.netty.noUnsafe=true --Dio.netty.noKeySetOptimization=true --Dio.netty.recycler.maxCapacityPerThread=0 - -# log4j 2 --Dlog4j.shutdownHookEnabled=false --Dlog4j2.disable.jmx=true - -## heap dumps - -# generate a heap dump when an allocation from the Java heap fails -# heap dumps are created in the working directory of the JVM --XX:+HeapDumpOnOutOfMemoryError - -# specify an alternative path for heap dumps -# ensure the directory exists and has sufficient space -#-XX:HeapDumpPath=/heap/dump/path - -## GC logging - -#-XX:+PrintGCDetails -#-XX:+PrintGCTimeStamps -#-XX:+PrintGCDateStamps -#-XX:+PrintClassHistogram -#-XX:+PrintTenuringDistribution -#-XX:+PrintGCApplicationStoppedTime - -# log GC status to a file with time stamps -# ensure the directory exists -#-Xloggc:${loggc} - -# By default, the GC log file will not rotate. -# By uncommenting the lines below, the GC log file -# will be rotated every 128MB at most 32 times. -#-XX:+UseGCLogFileRotation -#-XX:NumberOfGCLogFiles=32 -#-XX:GCLogFileSize=128M diff --git a/charts/aai-elasticsearch/resources/config/log4j2.properties b/charts/aai-elasticsearch/resources/config/log4j2.properties deleted file mode 100644 index e674865..0000000 --- a/charts/aai-elasticsearch/resources/config/log4j2.properties +++ /dev/null @@ -1,88 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -status = error - -# log action execution errors for easier debugging -logger.action.name = org.elasticsearch.action -logger.action.level = INFO - -appender.console.type = Console -appender.console.name = console -appender.console.layout.type = PatternLayout -appender.console.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%m%n - -appender.rolling.type = RollingFile -appender.rolling.name = rolling -appender.rolling.fileName = ${sys:es.logs.base_path}.log -appender.rolling.layout.type = PatternLayout -appender.rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%.10000m%n -appender.rolling.filePattern = ${sys:es.logs.base_path}-%d{yyyy-MM-dd}.log -appender.rolling.policies.type = Policies -appender.rolling.policies.time.type = TimeBasedTriggeringPolicy -appender.rolling.policies.time.interval = 1 -appender.rolling.policies.time.modulate = true - -rootLogger.level = info -rootLogger.appenderRef.console.ref = console -rootLogger.appenderRef.rolling.ref = rolling - -# appender.deprecation_rolling.type = RollingFile -# appender.deprecation_rolling.name = deprecation_rolling -# appender.deprecation_rolling.fileName = ${sys:es.logs.base_path}_deprecation.log -# appender.deprecation_rolling.layout.type = PatternLayout -# appender.deprecation_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%.10000m%n -# appender.deprecation_rolling.filePattern = ${sys:es.logs.base_path}_deprecation-%i.log.gz -# appender.deprecation_rolling.policies.type = Policies -# appender.deprecation_rolling.policies.size.type = SizeBasedTriggeringPolicy -# appender.deprecation_rolling.policies.size.size = 1GB -# appender.deprecation_rolling.strategy.type = DefaultRolloverStrategy -# appender.deprecation_rolling.strategy.max = 4 - -# logger.deprecation.name = org.elasticsearch.deprecation -# logger.deprecation.level = warn -# logger.deprecation.appenderRef.deprecation_rolling.ref = deprecation_rolling -# logger.deprecation.additivity = false - -appender.index_search_slowlog_rolling.type = RollingFile -appender.index_search_slowlog_rolling.name = index_search_slowlog_rolling -appender.index_search_slowlog_rolling.fileName = ${sys:es.logs.base_path}_index_search_slowlog.log -appender.index_search_slowlog_rolling.layout.type = PatternLayout -appender.index_search_slowlog_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c] %marker%.10000m%n -appender.index_search_slowlog_rolling.filePattern = ${sys:es.logs.base_path}_index_search_slowlog-%d{yyyy-MM-dd}.log -appender.index_search_slowlog_rolling.policies.type = Policies -appender.index_search_slowlog_rolling.policies.time.type = TimeBasedTriggeringPolicy -appender.index_search_slowlog_rolling.policies.time.interval = 1 -appender.index_search_slowlog_rolling.policies.time.modulate = true - -logger.index_search_slowlog_rolling.name = index.search.slowlog -logger.index_search_slowlog_rolling.level = trace -logger.index_search_slowlog_rolling.appenderRef.index_search_slowlog_rolling.ref = index_search_slowlog_rolling -logger.index_search_slowlog_rolling.additivity = false - -appender.index_indexing_slowlog_rolling.type = RollingFile -appender.index_indexing_slowlog_rolling.name = index_indexing_slowlog_rolling -appender.index_indexing_slowlog_rolling.fileName = ${sys:es.logs.base_path}_index_indexing_slowlog.log -appender.index_indexing_slowlog_rolling.layout.type = PatternLayout -appender.index_indexing_slowlog_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c] %marker%.10000m%n -appender.index_indexing_slowlog_rolling.filePattern = ${sys:es.logs.base_path}_index_indexing_slowlog-%d{yyyy-MM-dd}.log -appender.index_indexing_slowlog_rolling.policies.type = Policies -appender.index_indexing_slowlog_rolling.policies.time.type = TimeBasedTriggeringPolicy -appender.index_indexing_slowlog_rolling.policies.time.interval = 1 -appender.index_indexing_slowlog_rolling.policies.time.modulate = true - -logger.index_indexing_slowlog.name = index.indexing.slowlog.index -logger.index_indexing_slowlog.level = trace -logger.index_indexing_slowlog.appenderRef.index_indexing_slowlog_rolling.ref = index_indexing_slowlog_rolling -logger.index_indexing_slowlog.additivity = false diff --git a/charts/aai-elasticsearch/resources/config/sg/auth/esaai-keystore.jks b/charts/aai-elasticsearch/resources/config/sg/auth/esaai-keystore.jks Binary files differdeleted file mode 100644 index 21ec9bb..0000000 --- a/charts/aai-elasticsearch/resources/config/sg/auth/esaai-keystore.jks +++ /dev/null diff --git a/charts/aai-elasticsearch/resources/config/sg/auth/sgadmin-keystore.p12 b/charts/aai-elasticsearch/resources/config/sg/auth/sgadmin-keystore.p12 Binary files differdeleted file mode 100644 index db7cbf4..0000000 --- a/charts/aai-elasticsearch/resources/config/sg/auth/sgadmin-keystore.p12 +++ /dev/null diff --git a/charts/aai-elasticsearch/resources/config/sg/auth/truststore.jks b/charts/aai-elasticsearch/resources/config/sg/auth/truststore.jks Binary files differdeleted file mode 100644 index b3bd666..0000000 --- a/charts/aai-elasticsearch/resources/config/sg/auth/truststore.jks +++ /dev/null diff --git a/charts/aai-elasticsearch/resources/config/sg/sg_action_groups.yml b/charts/aai-elasticsearch/resources/config/sg/sg_action_groups.yml deleted file mode 100644 index be5901a..0000000 --- a/charts/aai-elasticsearch/resources/config/sg/sg_action_groups.yml +++ /dev/null @@ -1,137 +0,0 @@ -UNLIMITED: - readonly: true - permissions: - - "*" - -###### INDEX LEVEL ###### - -INDICES_ALL: - readonly: true - permissions: - - "indices:*" - -# for backward compatibility -ALL: - readonly: true - permissions: - - INDICES_ALL - -MANAGE: - readonly: true - permissions: - - "indices:monitor/*" - - "indices:admin/*" - -CREATE_INDEX: - readonly: true - permissions: - - "indices:admin/create" - - "indices:admin/mapping/put" - -MANAGE_ALIASES: - readonly: true - permissions: - - "indices:admin/aliases*" - -# for backward compatibility -MONITOR: - readonly: true - permissions: - - INDICES_MONITOR - -INDICES_MONITOR: - readonly: true - permissions: - - "indices:monitor/*" - -DATA_ACCESS: - readonly: true - permissions: - - "indices:data/*" - - CRUD - -WRITE: - readonly: true - permissions: - - "indices:data/write*" - - "indices:admin/mapping/put" - -READ: - readonly: true - permissions: - - "indices:data/read*" - - "indices:admin/mappings/fields/get*" - -DELETE: - readonly: true - permissions: - - "indices:data/write/delete*" - -CRUD: - readonly: true - permissions: - - READ - - WRITE - -SEARCH: - readonly: true - permissions: - - "indices:data/read/search*" - - "indices:data/read/msearch*" - - SUGGEST - -SUGGEST: - readonly: true - permissions: - - "indices:data/read/suggest*" - -INDEX: - readonly: true - permissions: - - "indices:data/write/index*" - - "indices:data/write/update*" - - "indices:admin/mapping/put" - - "indices:data/write/bulk*" - -GET: - readonly: true - permissions: - - "indices:data/read/get*" - - "indices:data/read/mget*" - -###### CLUSTER LEVEL ###### - -CLUSTER_ALL: - readonly: true - permissions: - - "cluster:*" - -CLUSTER_MONITOR: - readonly: true - permissions: - - "cluster:monitor/*" - -CLUSTER_COMPOSITE_OPS_RO: - readonly: true - permissions: - - "indices:data/read/mget" - - "indices:data/read/msearch" - - "indices:data/read/mtv" - - "indices:data/read/coordinate-msearch*" - - "indices:admin/aliases/exists*" - - "indices:admin/aliases/get*" - - "indices:data/read/scroll" - -CLUSTER_COMPOSITE_OPS: - readonly: true - permissions: - - "indices:data/write/bulk" - - "indices:admin/aliases*" - - "indices:data/write/reindex" - - CLUSTER_COMPOSITE_OPS_RO - -MANAGE_SNAPSHOTS: - readonly: true - permissions: - - "cluster:admin/snapshot/*" - - "cluster:admin/repository/*"
\ No newline at end of file diff --git a/charts/aai-elasticsearch/resources/config/sg/sg_config.yml b/charts/aai-elasticsearch/resources/config/sg/sg_config.yml deleted file mode 100644 index d0050e0..0000000 --- a/charts/aai-elasticsearch/resources/config/sg/sg_config.yml +++ /dev/null @@ -1,123 +0,0 @@ -# This is the main Search Guard configuration file where authentication -# and authorization is defined. -# -# You need to configure at least one authentication domain in the authc of this file. -# An authentication domain is responsible for extracting the user credentials from -# the request and for validating them against an authentication backend like Active Directory for example. -# -# If more than one authentication domain is configured the first one which succeeds wins. -# If all authentication domains fail then the request is unauthenticated. -# In this case an exception is thrown and/or the HTTP status is set to 401. -# -# After authentication authorization (authz) will be applied. There can be zero or more authorizers which collect -# the roles from a given backend for the authenticated user. -# -# Both, authc and auth can be enabled/disabled separately for REST and TRANSPORT layer. Default is true for both. -# http_enabled: true -# transport_enabled: true -# -# 5.x Migration: "enabled: true/false" will also be respected currently but only to provide backward compatibility. -# -# For HTTP it is possible to allow anonymous authentication. If that is the case then the HTTP authenticators try to -# find user credentials in the HTTP request. If credentials are found then the user gets regularly authenticated. -# If none can be found the user will be authenticated as an "anonymous" user. This user has always the username "sg_anonymous" -# and one role named "sg_anonymous_backendrole". -# If you enable anonymous authentication all HTTP authenticators will not challenge. -# -# -# Note: If you define more than one HTTP authenticators make sure to put non-challenging authenticators like "proxy" or "clientcert" -# first and the challenging one last. -# Because it's not possible to challenge a client with two different authentication methods (for example -# Kerberos and Basic) only one can have the challenge flag set to true. You can cope with this situation -# by using pre-authentication, e.g. sending a HTTP Basic authentication header in the request. -# -# Default value of the challenge flag is true. -# -# -# HTTP -# basic (challenging) -# proxy (not challenging, needs xff) -# clientcert (not challenging, needs https) -# host (not challenging) #DEPRECATED, will be removed in a future version. -# host based authentication is configurable in sg_roles_mapping - -# Authc -# internal -# noop - -# Authz -# noop - -# Some SearchGuard functionality is licensed under Apache-2.0, while other functionality is non-free; -# see https://github.com/floragunncom/search-guard. The functionality enabled in this configuration -# file only include those that are licensed under Apache-2.0. Please use care and review SearchGuard's -# license details before enabling any additional features here. - -searchguard: - dynamic: - # Set filtered_alias_mode to 'disallow' to forbid more than 2 filtered aliases per index - # Set filtered_alias_mode to 'warn' to allow more than 2 filtered aliases per index but warns about it (default) - # Set filtered_alias_mode to 'nowarn' to allow more than 2 filtered aliases per index silently - #filtered_alias_mode: warn - http: - anonymous_auth_enabled: false - xff: - enabled: false - internalProxies: '192\.168\.0\.10|192\.168\.0\.11' # regex pattern - #internalProxies: '.*' # trust all internal proxies, regex pattern - remoteIpHeader: 'x-forwarded-for' - proxiesHeader: 'x-forwarded-by' - #trustedProxies: '.*' # trust all external proxies, regex pattern - ###### see https://docs.oracle.com/javase/7/docs/api/java/util/regex/Pattern.html for regex help - ###### more information about XFF https://en.wikipedia.org/wiki/X-Forwarded-For - ###### and here https://tools.ietf.org/html/rfc7239 - ###### and https://tomcat.apache.org/tomcat-8.0-doc/config/valve.html#Remote_IP_Valve - authc: - basic_internal_auth_domain: - http_enabled: true - transport_enabled: true - order: 2 - http_authenticator: - type: basic - challenge: true - authentication_backend: - type: intern - proxy_auth_domain: - http_enabled: false - transport_enabled: false - order: 3 - http_authenticator: - type: proxy - challenge: false - config: - user_header: "x-proxy-user" - roles_header: "x-proxy-roles" - authentication_backend: - type: noop - jwt_auth_domain: - http_enabled: false - transport_enabled: false - order: 0 - http_authenticator: - type: jwt - challenge: false - config: - signing_key: "base64 encoded HMAC key or public RSA/ECDSA pem key" - jwt_header: "Authorization" - jwt_url_parameter: null - roles_key: null - subject_key: null - authentication_backend: - type: noop - clientcert_auth_domain: - http_enabled: true - transport_enabled: true - order: 1 - http_authenticator: - type: clientcert - config: - username_attribute: cn #optional, if omitted DN becomes username - challenge: false - authentication_backend: - type: noop - authz:
\ No newline at end of file diff --git a/charts/aai-elasticsearch/resources/config/sg/sg_internal_users.yml b/charts/aai-elasticsearch/resources/config/sg/sg_internal_users.yml deleted file mode 100644 index 942a716..0000000 --- a/charts/aai-elasticsearch/resources/config/sg/sg_internal_users.yml +++ /dev/null @@ -1,45 +0,0 @@ -# This is the internal user database -# The hash value is a bcrypt hash and can be generated with plugin/tools/hash.sh - -#password is: admin -admin: - readonly: true - hash: $2a$12$VcCDgh2NDk07JGN0rjGbM.Ad41qVR/YFJcgHp0UGns5JDymv..TOG - roles: - - admin - attributes: - #no dots allowed in attribute names - attribute1: value1 - attribute2: value2 - attribute3: value3 - -#password is: logstash -logstash: - hash: $2a$12$u1ShR4l4uBS3Uv59Pa2y5.1uQuZBrZtmNfqB3iM/.jL0XoV9sghS2 - roles: - - logstash - -#password is: kibanaserver -kibanaserver: - readonly: true - hash: $2a$12$4AcgAt3xwOWadA5s5blL6ev39OXDNhmOesEoo33eZtrq2N0YrU3H. - -#password is: kibanaro -kibanaro: - hash: $2a$12$JJSXNfTowz7Uu5ttXfeYpeYE0arACvcwlPBStB1F.MI7f0U9Z4DGC - roles: - - kibanauser - - readall - -#password is: readall -readall: - hash: $2a$12$ae4ycwzwvLtZxwZ82RmiEunBbIPiAmGZduBAjKN0TXdwQFtCwARz2 - #password is: readall - roles: - - readall - -#password is: snapshotrestore -snapshotrestore: - hash: $2y$12$DpwmetHKwgYnorbgdvORCenv4NAK8cPUg8AI6pxLCuWf/ALc0.v7W - roles: - - snapshotrestore
\ No newline at end of file diff --git a/charts/aai-elasticsearch/resources/config/sg/sg_roles.yml b/charts/aai-elasticsearch/resources/config/sg/sg_roles.yml deleted file mode 100644 index c918e85..0000000 --- a/charts/aai-elasticsearch/resources/config/sg/sg_roles.yml +++ /dev/null @@ -1,262 +0,0 @@ -# Allows everything, but no changes to searchguard configuration index -sg_all_access: - readonly: true - cluster: - - UNLIMITED - indices: - '*': - '*': - - UNLIMITED - tenants: - admin_tenant: RW - -# Read all, but no write permissions -sg_readall: - readonly: true - cluster: - - CLUSTER_COMPOSITE_OPS_RO - indices: - '*': - '*': - - READ - -# Read all and monitor, but no write permissions -sg_readall_and_monitor: - cluster: - - CLUSTER_MONITOR - - CLUSTER_COMPOSITE_OPS_RO - indices: - '*': - '*': - - READ - -# For users which use kibana, access to indices must be granted separately -sg_kibana_user: - readonly: true - cluster: - - INDICES_MONITOR - - CLUSTER_COMPOSITE_OPS - indices: - '?kibana': - '*': - - MANAGE - - INDEX - - READ - - DELETE - '?kibana-6': - '*': - - MANAGE - - INDEX - - READ - - DELETE - '?kibana_*': - '*': - - MANAGE - - INDEX - - READ - - DELETE - '?tasks': - '*': - - INDICES_ALL - '?management-beats': - '*': - - INDICES_ALL - '*': - '*': - - indices:data/read/field_caps* - - indices:data/read/xpack/rollup* - - indices:admin/mappings/get* - - indices:admin/get - -# For the kibana server -sg_kibana_server: - readonly: true - cluster: - - CLUSTER_MONITOR - - CLUSTER_COMPOSITE_OPS - - cluster:admin/xpack/monitoring* - - indices:admin/template* - - indices:data/read/scroll* - indices: - '?kibana': - '*': - - INDICES_ALL - '?kibana-6': - '*': - - INDICES_ALL - '?kibana_*': - '*': - - INDICES_ALL - '?reporting*': - '*': - - INDICES_ALL - '?monitoring*': - '*': - - INDICES_ALL - '?tasks': - '*': - - INDICES_ALL - '?management-beats*': - '*': - - INDICES_ALL - '*': - '*': - - "indices:admin/aliases*" - -# For logstash and beats -sg_logstash: - cluster: - - CLUSTER_MONITOR - - CLUSTER_COMPOSITE_OPS - - indices:admin/template/get - - indices:admin/template/put - indices: - 'logstash-*': - '*': - - CRUD - - CREATE_INDEX - '*beat*': - '*': - - CRUD - - CREATE_INDEX - -# Allows adding and modifying repositories and creating and restoring snapshots -sg_manage_snapshots: - cluster: - - MANAGE_SNAPSHOTS - indices: - '*': - '*': - - "indices:data/write/index" - - "indices:admin/create" - -# Allows each user to access own named index -sg_own_index: - cluster: - - CLUSTER_COMPOSITE_OPS - indices: - '${user_name}': - '*': - - INDICES_ALL - -### X-Pack COMPATIBILITY -sg_xp_monitoring: - readonly: true - cluster: - - cluster:monitor/xpack/info - - cluster:monitor/main - - cluster:admin/xpack/monitoring/bulk - indices: - '?monitor*': - '*': - - INDICES_ALL - -sg_xp_alerting: - readonly: true - cluster: - - indices:data/read/scroll - - cluster:admin/xpack/watcher* - - cluster:monitor/xpack/watcher* - indices: - '?watches*': - '*': - - INDICES_ALL - '?watcher-history-*': - '*': - - INDICES_ALL - '?triggered_watches': - '*': - - INDICES_ALL - '*': - '*': - - READ - - indices:admin/aliases/get - -sg_xp_machine_learning: - readonly: true - cluster: - - cluster:admin/persistent* - - cluster:internal/xpack/ml* - - indices:data/read/scroll* - - cluster:admin/xpack/ml* - - cluster:monitor/xpack/ml* - indices: - '*': - '*': - - READ - - indices:admin/get* - '?ml-*': - '*': - - "*" - -### LEGACY ROLES, FOR COMPATIBILITY ONLY -### WILL BE REMOVED IN SG7, DO NOT USE ANYMORE - -sg_readonly_and_monitor: - cluster: - - CLUSTER_MONITOR - - CLUSTER_COMPOSITE_OPS_RO - indices: - '*': - '*': - - READ - -# Make xpack monitoring work -sg_monitor: - cluster: - - cluster:admin/xpack/monitoring/* - - cluster:admin/ingest/pipeline/put - - cluster:admin/ingest/pipeline/get - - indices:admin/template/get - - indices:admin/template/put - - CLUSTER_MONITOR - - CLUSTER_COMPOSITE_OPS - indices: - '?monitor*': - '*': - - INDICES_ALL - '?marvel*': - '*': - - INDICES_ALL - '?kibana*': - '*': - - READ - '*': - '*': - - indices:data/read/field_caps - -# Make xpack alerting work -sg_alerting: - cluster: - - indices:data/read/scroll - - cluster:admin/xpack/watcher/watch/put - - cluster:admin/xpack/watcher* - - CLUSTER_MONITOR - - CLUSTER_COMPOSITE_OPS - indices: - '?kibana*': - '*': - - READ - '?watches*': - '*': - - INDICES_ALL - '?watcher-history-*': - '*': - - INDICES_ALL - '?triggered_watches': - '*': - - INDICES_ALL - '*': - '*': - - READ - - -sg_role_test: - cluster: - - indices:admin/template/get - - indices:admin/template/put - - CLUSTER_COMPOSITE_OPS - indices: - '*': - '*': - - UNLIMITED diff --git a/charts/aai-elasticsearch/resources/config/sg/sg_roles_mapping.yml b/charts/aai-elasticsearch/resources/config/sg/sg_roles_mapping.yml deleted file mode 100644 index 970e027..0000000 --- a/charts/aai-elasticsearch/resources/config/sg/sg_roles_mapping.yml +++ /dev/null @@ -1,38 +0,0 @@ -# In this file users, backendroles and hosts can be mapped to Search Guard roles. -# Permissions for Search Guard roles are configured in sg_roles.yml - -sg_all_access: - readonly: true - backendroles: - - admin - -sg_logstash: - backendroles: - - logstash - -sg_kibana_server: - readonly: true - users: - - kibanaserver - -sg_kibana_user: - backendroles: - - kibanauser - -sg_readall: - readonly: true - backendroles: - - readall - -sg_manage_snapshots: - readonly: true - backendroles: - - snapshotrestore - -sg_own_index: - users: - - '*' - -sg_role_test: - users: - - test |